Patchwork [build] Move Solaris 2 startup files to toplevel libgcc, revised

login
register
mail settings
Submitter Rainer Orth
Date May 30, 2011, 2:29 p.m.
Message ID <yddfwnwtg6p.fsf@manam.CeBiTec.Uni-Bielefeld.DE>
Download mbox | patch
Permalink /patch/97919/
State New
Headers show

Comments

Rainer Orth - May 30, 2011, 2:29 p.m.
Eric Botcazou <ebotcazou@adacore.com> writes:

>> * Non-Solaris SPARC changes:
>>
>>   After I had moved sparc/sol2-c[in].asm to libgcc, I noticed that
>>   despite the name a few non-Solaris targets uses those files, too:
>>
>>   sparc-*-elf*, sparc-*-rtems*, sparc64-*-elf*, sparc64-*-rtems*
>
> Yes, I tried to untangle that, but the RTEMS folks complained so I had to 
> backpedal.  Note that this is also the case on the i386 side.

Drats, I hadn't expected anything like this ;-(

Here's the updated patch which takes care of this.  I've taken the
liberty to rename gcc/config/i386/t-rtems-i386 to
gcc/config/i386/t-rtems, following all other RTEMS makefile fragments.
I'd be really grateful if the RTEMS maintainers could give it a whirl.

Besides, I still need build and SPARC maintainer approval for the
non-Solaris parts of the patch from as outlined in the previous
submission:

	http://gcc.gnu.org/ml/gcc-patches/2011-05/msg02181.html

Bootstrapped without regressions on i386-pc-solaris2.10,
i386-pc-solaris2.11 and sparc-sun-solaris2.11.

Ok for mainline after the RTEMS parts have been tested/approved?

Thanks.
	Rainer


2011-05-02  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	gcc:
	* config.gcc (i[34567]86-*-rtems*): Remove extra_parts.
	Use i386/t-rtems.
	Remove i386-crtstuff from tmake_file.
	(i[34567]86-*-solaris2*): Remove t-svr4,
	t-slibgcc-elf-ver, t-slibgcc-sld from tmake_file, add
	t-slibgcc-dummy.
	(sparc-*-elf*, sparc64-*-elf*): Remove tmake_file, extra_parts.
	(sparc-*-rtems*, sparc64-*-rtems*): Remove sparc/t-crtin,
	sparc/t-crtfm from tmake_file.
	(sparc*-*-solaris2*): Remove sparc/t-sol2, sparc/t-crtfm,
	t-slibgcc-elf-ver, t-slibgcc-sld, add t-slibgcc-dummy.
	Remove extra_parts.
	* config/t-sol2 (TARGET_LIBGCC2_CFLAGS): Define.
	* config/i386/t-rtems-i386: Rename to ...
	* config/i386/t-rtems: ... this.
	($(T)crti.o, $(T)crtn.o): Remove.
	(FPBIT, DPBIT, LIB2FUNCS_EXTRA): Remove.
	(dp-bit.c, fp-bit.c, xp-bit.c): Remove.
	(EXTRA_MULTILIB_PARTS, LIBGCC, INSTALL_LIBGCC): Remove.
	* config/i386/t-sol2-10 (LIBGCC, INSTALL_LIBGCC,
	EXTRA_MULTILIB_PARTS): Remove.
	* config/sparc/t-sol2-64: Likewise.
	* config/sparc/t-sol2: Remove.
	* config/sparc/t-crtin: Remove.
	* config/sparc/gmon-sol2.c: Move to ../libgcc/config.
	* config/i386/gmon-sol2.c: Remove.
	* config/i386/sol2-c1.asm: Move to ../libgcc/config/i386/sol2-c1.S.
	* config/i386/sol2-ci.asm: Move to ../libgcc/config/i386/sol2-ci.S.
	* config/i386/sol2-cn.asm: Move to ../libgcc/config/i386/sol2-cn.S.
	* config/i386/sol2-gc1.asm: Remove.
	* config/sparc/sol2-c1.asm: Move to ../libgcc/config/sparc/sol2-c1.S.
	* config/sparc/sol2-ci.asm: Move to ../libgcc/config/sparc/sol2-ci.S.
	* config/sparc/sol2-cn.asm: Move to ../libgcc/config/sparc/sol2-cn.S.
	* config/t-slibgcc-sld: Remove.
	* config/t-slibgcc-dummy: New file.

	libgcc:
	* Makefile.in (cpu_type): Define.
	* config.host (i[34567]86-*-rtems*): Handle it.
	(i[34567]86-*-solaris2*): Move body ...
	(*-*-solaris2*): ... here.
	New case, generalize.
	(sparc-*-elf*): Handle it.
	(sparc-*-linux*, sparc64-*-linux*): Replace sparc/t-crtfm by t-crtfm.
	(sparc-*-rtems*, sparc64-*-rtems*); Handle it.
	(sparc64-*-solaris2*, sparcv9-*-solaris2*, sparc-*-solaris2*):
	Fold into ...
	(sparc*-*-solaris2*): ... this.
	New case.
	(sparc64-*-elf*): Handle it.
	* config/gmon-sol2.c: Move from ../gcc/config/sparc.
	Merge ../gcc/config/i386/gmon-sol2.c.
	* config/i386/sol2-c1.S: Move from ../gcc/config/i386/sol2-c1.asm.
	Use C comments.
	Merge ../gcc/config/i386/sol2-gc1.asm.
	* config/i386/sol2-ci.S: Move from ../gcc/config/i386/sol2-ci.asm.
	Use C comments.
	* config/i386/sol2-cn.S: Move from ../gcc/config/i386/sol2-cn.asm.
	Use C comments.
	* config/i386/t-crtfm (crtfastmath.o): Use $<.
	* config/i386/t-crtstuff: New file.
	* config/i386/t-softfp: New file.
	* config/i386/t-sol2 ($(T)gmon.o, $(T)gcrt1.o, $(T)crt1.o),
	$(T)crti.o, $(T)crtn.o): Remove.
	(gcrt1.o): New rule.
	(TARGET_LIBGCC2_CFLAGS): Remove.
	* config/sparc/sol2-c1.S: Move from ../gcc/config/sparc/sol2-c1.asm.
	* config/sparc/sol2-ci.S: Move from ../gcc/config/sparc/sol2-ci.asm.
	* config/sparc/sol2-cn.S: Move from ../gcc/config/sparc/sol2-cn.asm.
	* config/sparc/t-sol2: New file.
	* config/sparc/t-crtfm: Move to ...
	* config/t-crtfm: ... this.
	Use $(cpu_type), $<.
	* config/t-crtin: New file.
	* config/sparc/t-softfp: New file.
	* config/sparc/t-softmul: New file.
	* config/t-rtems: New file.
	* config/t-slibgcc: New file.
	* config/t-slibgcc-elf-ver: New file.
	* config/t-slibgcc-gld: New file.
	* config/t-slibgcc-sld: New file.
	* config/t-sol2: New file.
	* configure.ac: Include ../config/lib-ld.m4.
	Call AC_LIB_PROG_LD_GNU.
	Substitute cpu_type.
	* configure: Regenerate.
Paolo Bonzini - May 31, 2011, 9:07 a.m.
On 05/30/2011 04:29 PM, Rainer Orth wrote:
>>> * Non-Solaris SPARC changes:
>>> >>
>>> >>     After I had moved sparc/sol2-c[in].asm to libgcc, I noticed that
>>> >>     despite the name a few non-Solaris targets uses those files, too:
>>> >>
>>> >>     sparc-*-elf*, sparc-*-rtems*, sparc64-*-elf*, sparc64-*-rtems*
>> >
>> >  Yes, I tried to untangle that, but the RTEMS folks complained so I had to
>> >  backpedal.  Note that this is also the case on the i386 side.
> Drats, I hadn't expected anything like this ;-(
>
> Here's the updated patch which takes care of this.  I've taken the
> liberty to rename gcc/config/i386/t-rtems-i386 to
> gcc/config/i386/t-rtems, following all other RTEMS makefile fragments.
> I'd be really grateful if the RTEMS maintainers could give it a whirl.
>
> Besides, I still need build and SPARC maintainer approval for the
> non-Solaris parts of the patch from as outlined in the previous
> submission:
>
> 	http://gcc.gnu.org/ml/gcc-patches/2011-05/msg02181.html
>
> Bootstrapped without regressions on i386-pc-solaris2.10,
> i386-pc-solaris2.11 and sparc-sun-solaris2.11.
>
> Ok for mainline after the RTEMS parts have been tested/approved?

Looks good as far as I'm concerned.  As a followup, please delete 
t-slibgcc-darwin and use the new t-slibgcc-dummy instead (even better, 
you could "svn mv" it).

Paolo
Rainer Orth - May 31, 2011, 3:21 p.m.
Paolo Bonzini <bonzini@gnu.org> writes:

> On 05/30/2011 04:29 PM, Rainer Orth wrote:
>>>> * Non-Solaris SPARC changes:
>>>> >>
>>>> >>     After I had moved sparc/sol2-c[in].asm to libgcc, I noticed that
>>>> >>     despite the name a few non-Solaris targets uses those files, too:
>>>> >>
>>>> >>     sparc-*-elf*, sparc-*-rtems*, sparc64-*-elf*, sparc64-*-rtems*
>>> >
>>> >  Yes, I tried to untangle that, but the RTEMS folks complained so I had to
>>> >  backpedal.  Note that this is also the case on the i386 side.
>> Drats, I hadn't expected anything like this ;-(
>>
>> Here's the updated patch which takes care of this.  I've taken the
>> liberty to rename gcc/config/i386/t-rtems-i386 to
>> gcc/config/i386/t-rtems, following all other RTEMS makefile fragments.
>> I'd be really grateful if the RTEMS maintainers could give it a whirl.
>>
>> Besides, I still need build and SPARC maintainer approval for the
>> non-Solaris parts of the patch from as outlined in the previous
>> submission:
>>
>> 	http://gcc.gnu.org/ml/gcc-patches/2011-05/msg02181.html
>>
>> Bootstrapped without regressions on i386-pc-solaris2.10,
>> i386-pc-solaris2.11 and sparc-sun-solaris2.11.
>>
>> Ok for mainline after the RTEMS parts have been tested/approved?
>
> Looks good as far as I'm concerned.  As a followup, please delete
> t-slibgcc-darwin and use the new t-slibgcc-dummy instead (even better, you
> could "svn mv" it).

I think I just need RTEMS testing/approval now, everything else should
be set?

	Rainer

Patch

diff --git a/gcc/config.gcc b/gcc/config.gcc
--- a/gcc/config.gcc
+++ b/gcc/config.gcc
@@ -1320,8 +1320,7 @@  i[34567]86-*-nto-qnx*)
 	;;
 i[34567]86-*-rtems*)
 	tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h i386/rtemself.h rtems.h newlib-stdint.h"
-	extra_parts="crtbegin.o crtend.o crti.o crtn.o"
-	tmake_file="${tmake_file} i386/t-rtems-i386 i386/t-crtstuff t-rtems"
+	tmake_file="${tmake_file} i386/t-rtems t-rtems"
 	;;
 i[34567]86-*-solaris2*)
 	tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/sysv4.h sol2.h"
@@ -1350,16 +1349,13 @@  i[34567]86-*-solaris2*)
 	if test x$gas = xyes; then
 		tm_file="${tm_file} i386/sol2-gas.h"
 	fi
-	tmake_file="${tmake_file} t-sol2 t-svr4"
+	tmake_file="${tmake_file} t-sol2 t-slibgcc-dummy"
 	c_target_objs="${c_target_objs} sol2-c.o"
 	cxx_target_objs="${cxx_target_objs} sol2-c.o"
 	extra_objs="sol2.o"
 	tm_p_file="${tm_p_file} sol2-protos.h"
 	if test x$gnu_ld = xyes; then
-		tmake_file="$tmake_file t-slibgcc-elf-ver"
 		tm_defines="${tm_defines} TARGET_GNU_LD=1"
-	else
-		tmake_file="$tmake_file t-slibgcc-sld"
 	fi
 	if test x$gas = xyes; then
 		tm_file="usegas.h ${tm_file}"
@@ -1370,9 +1366,6 @@  i[34567]86-*-solaris2*)
 		tm_file="${tm_file} i386/x86-64.h i386/sol2-10.h"
 		tm_defines="${tm_defines} TARGET_BI_ARCH=1"
 		tmake_file="$tmake_file i386/t-sol2-10"
-		# i386/t-crtstuff only affects libgcc.  Its inclusion
-		# depends on a runtime test and is thus performed in
-		# libgcc/configure.ac instead.
 		need_64bit_hwint=yes
 		need_64bit_isa=yes
 		use_gcc_stdint=wrap
@@ -2441,13 +2434,10 @@  sparc-*-elf*)
 		tmake_file="sparc/t-elf"
 		;;
 	esac
-	tmake_file="${tmake_file} sparc/t-crtin sparc/t-crtfm"
-	extra_parts="crtbegin.o crtend.o"
 	;;
 sparc-*-rtems*)
 	tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/sp-elf.h sparc/rtemself.h rtems.h newlib-stdint.h"
-	tmake_file="sparc/t-elf sparc/t-crtin sparc/t-crtfm t-rtems"
-	extra_parts="crtbegin.o crtend.o"
+	tmake_file="sparc/t-elf t-rtems"
 	;;
 sparc-*-linux*)
 	tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h gnu-user.h linux.h glibc-stdint.h"
@@ -2504,12 +2494,7 @@  sparc*-*-solaris2*)
 		tm_file="${tm_file} sol2-gld.h sparc/sol2-gld-bi.h"
 	fi
 	tm_file="${tm_file} tm-dwarf2.h"
-	tmake_file="t-sol2 sparc/t-sol2 sparc/t-sol2-64 sparc/t-crtin sparc/t-crtfm"
-	if test x$gnu_ld = xyes; then
-		tmake_file="$tmake_file t-slibgcc-elf-ver"
-	else
-		tmake_file="$tmake_file t-slibgcc-sld"
-	fi
+	tmake_file="t-sol2 t-slibgcc-dummy sparc/t-sol2-64"
 	if test x$gas = xyes; then
 		tm_file="usegas.h ${tm_file}"
 	fi
@@ -2517,7 +2502,6 @@  sparc*-*-solaris2*)
 	cxx_target_objs="sol2-c.o"
 	extra_objs="sol2.o"
 	tm_p_file="${tm_p_file} sol2-protos.h"
-	extra_parts="crt1.o gcrt1.o gmon.o crtbegin.o crtend.o"
 	case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
 	  "":yes:* | yes:yes:* )
 		thread_file=posix
@@ -2531,14 +2515,11 @@  sparc-wrs-vxworks)
 sparc64-*-elf*)
 	tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp64-elf.h"
 	extra_options="${extra_options} sparc/little-endian.opt"
-	tmake_file="${tmake_file} sparc/t-crtin sparc/t-crtfm"
-	extra_parts="crtbegin.o crtend.o"
 	;;
 sparc64-*-rtems*)
 	tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp64-elf.h sparc/rtemself.h rtems.h"
 	extra_options="${extra_options} sparc/little-endian.opt"
-	tmake_file="${tmake_file} sparc/t-crtin sparc/t-crtfm t-rtems"
-	extra_parts="crtbegin.o crtend.o"
+	tmake_file="${tmake_file} t-rtems"
 	;;
 sparc64-*-linux*)
 	tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h sparc/sysv4.h gnu-user.h linux.h glibc-stdint.h sparc/linux64.h"
diff --git a/gcc/config/i386/gmon-sol2.c b/gcc/config/i386/gmon-sol2.c
deleted file mode 100644
diff --git a/gcc/config/i386/sol2-gc1.asm b/gcc/config/i386/sol2-gc1.asm
deleted file mode 100644
diff --git a/gcc/config/i386/t-rtems-i386 b/gcc/config/i386/t-rtems
rename from gcc/config/i386/t-rtems-i386
rename to gcc/config/i386/t-rtems
--- a/gcc/config/i386/t-rtems-i386
+++ b/gcc/config/i386/t-rtems
@@ -1,4 +1,5 @@ 
-# Copyright (C) 1999, 2001, 2002, 2005, 2007 Free Software Foundation, Inc.
+# Copyright (C) 1999, 2001, 2002, 2005, 2007, 2011
+# Free Software Foundation, Inc.
 #
 # This file is part of GCC.
 #
@@ -16,43 +17,6 @@ 
 # along with GCC; see the file COPYING3.  If not see
 # <http://www.gnu.org/licenses/>.
 #
-#
-# This file was based on t-sol2 - x68 Solaris implementation. Actually,
-# the source code to create crti.o anf crtn.o are exactly the same 
-# as the ones for Solaris. Later, we might want to have a RTEMS's 
-# version of these files.
-#
-
-$(T)crti.o: $(srcdir)/config/i386/sol2-ci.asm $(GCC_PASSES)
-	sed -e '/^!/d' <$(srcdir)/config/i386/sol2-ci.asm >crti.s
-	$(GCC_FOR_TARGET) -c -o $(T)crti.o crti.s
-$(T)crtn.o: $(srcdir)/config/i386/sol2-cn.asm $(GCC_PASSES)
-	sed -e '/^!/d' <$(srcdir)/config/i386/sol2-cn.asm >crtn.s
-	$(GCC_FOR_TARGET) -c -o $(T)crtn.o crtn.s
-
-# We want fine grained libraries, so use the new code to build the
-# floating point emulation libraries.
-FPBIT = fp-bit.c
-DPBIT = dp-bit.c
-
-LIB2FUNCS_EXTRA = xp-bit.c
-
-dp-bit.c: $(srcdir)/config/fp-bit.c
-	echo '#ifdef __LITTLE_ENDIAN__' > dp-bit.c
-	echo '#define FLOAT_BIT_ORDER_MISMATCH' >>dp-bit.c
-	echo '#endif'           >> dp-bit.c
-	cat $(srcdir)/config/fp-bit.c >> dp-bit.c
-
-fp-bit.c: $(srcdir)/config/fp-bit.c
-	echo '#define FLOAT' > fp-bit.c
-	echo '#ifdef __LITTLE_ENDIAN__' >> fp-bit.c
-	echo '#define FLOAT_BIT_ORDER_MISMATCH' >>fp-bit.c
-	echo '#endif'           >> fp-bit.c
-	cat $(srcdir)/config/fp-bit.c >> fp-bit.c
-
-xp-bit.c: $(srcdir)/config/fp-bit.c
-	echo '#define EXTENDED_FLOAT_STUBS' > xp-bit.c
-	cat $(srcdir)/config/fp-bit.c >> xp-bit.c
 
 MULTILIB_OPTIONS = mtune=i486/mtune=pentium/mtune=pentiumpro \
 msoft-float
@@ -62,8 +26,3 @@  MULTILIB_MATCHES += mtune?pentium=mtune?
 MULTILIB_EXCEPTIONS = \
 mtune=pentium/*msoft-float* \
 mtune=pentiumpro/*msoft-float*
-
-EXTRA_MULTILIB_PARTS = crtbegin.o crtend.o
-
-LIBGCC = stmp-multilib
-INSTALL_LIBGCC = install-multilib
diff --git a/gcc/config/i386/t-sol2-10 b/gcc/config/i386/t-sol2-10
--- a/gcc/config/i386/t-sol2-10
+++ b/gcc/config/i386/t-sol2-10
@@ -1,4 +1,4 @@ 
-# Copyright (C) 2004 Free Software Foundation, Inc.
+# Copyright (C) 2004, 2011 Free Software Foundation, Inc.
 #
 # This file is part of GCC.
 #
@@ -19,11 +19,3 @@ 
 MULTILIB_OPTIONS = m32/m64
 MULTILIB_DIRNAMES = 32 amd64
 MULTILIB_OSDIRNAMES = . amd64
-
-LIBGCC = stmp-multilib
-INSTALL_LIBGCC = install-multilib
-
-# GCC contains i386 assembler sources for some of the startfiles
-# which aren't appropriate for amd64.  Just use the installed
-# versions of: crt1.o crti.o crtn.o gcrt1.o
-EXTRA_MULTILIB_PARTS=gmon.o crtbegin.o crtend.o
diff --git a/gcc/config/sparc/t-sol2-64 b/gcc/config/sparc/t-sol2-64
--- a/gcc/config/sparc/t-sol2-64
+++ b/gcc/config/sparc/t-sol2-64
@@ -2,6 +2,3 @@  MULTILIB_OPTIONS = m32/m64
 MULTILIB_DIRNAMES = sparcv8plus sparcv9
 MULTILIB_MATCHES =
 MULTILIB_OSDIRNAMES = . sparcv9
-
-LIBGCC = stmp-multilib
-INSTALL_LIBGCC = install-multilib
diff --git a/gcc/config/t-slibgcc-dummy b/gcc/config/t-slibgcc-dummy
new file mode 100644
--- /dev/null
+++ b/gcc/config/t-slibgcc-dummy
@@ -0,0 +1,3 @@ 
+# SHLIB_LINK must be non-empty so ENABLE_SHARED_LIBGCC is defined correctly
+# in DRIVER_DEFINES if libgcc configuration has been moved to toplevel.
+SHLIB_LINK = dummy
diff --git a/gcc/config/t-sol2 b/gcc/config/t-sol2
--- a/gcc/config/t-sol2
+++ b/gcc/config/t-sol2
@@ -29,6 +29,9 @@  sol2.o: $(srcdir)/config/sol2.c $(CONFIG
 	$(COMPILER) -c $(ALL_COMPILERFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
 	  $(srcdir)/config/sol2.c
 
+# This is required by gcc/ada/gcc-interface/Makefile.in.
+TARGET_LIBGCC2_CFLAGS = -fPIC
+
 # Use unwind-dw2-fde-glibc.c.  Unless linker support and dl_iterate_phdr
 # are present, automatically falls back to unwind-dw2-fde.c.
 LIB2ADDEH = $(srcdir)/unwind-dw2.c $(srcdir)/unwind-dw2-fde-glibc.c \
diff --git a/libgcc/Makefile.in b/libgcc/Makefile.in
--- a/libgcc/Makefile.in
+++ b/libgcc/Makefile.in
@@ -1,6 +1,6 @@ 
 # Makefile.in
 
-# Copyright (C) 2005, 2006, 2009, 2010 Free Software Foundation
+# Copyright (C) 2005, 2006, 2009, 2010, 2011 Free Software Foundation
 #
 # This file is part of GCC.
 #
@@ -35,6 +35,7 @@  shlib_slibdir = @slibdir@
 
 SHELL = @SHELL@
 
+cpu_type = @cpu_type@
 enable_shared = @enable_shared@
 decimal_float = @decimal_float@
 enable_decimal_float = @enable_decimal_float@
diff --git a/libgcc/config.host b/libgcc/config.host
--- a/libgcc/config.host
+++ b/libgcc/config.host
@@ -1,6 +1,6 @@ 
 # libgcc host-specific configuration file.
 # Copyright 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007,
-# 2008, 2009, 2010 Free Software Foundation, Inc.
+# 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
 
 #This file is part of GCC.
 
@@ -168,6 +168,31 @@  case ${host} in
   ;;
 *-*-rtems*)
   ;;
+*-*-solaris2*)
+  tmake_file="$tmake_file t-sol2 t-slibgcc t-slibgcc-elf-ver"
+  if test $with_gnu_ld = yes; then
+    tmake_file="$tmake_file t-slibgcc-gld"
+  else
+    tmake_file="$tmake_file t-slibgcc-sld"
+  fi
+  # Add cpu-specific t-sol2 after t-slibgcc-* so it can augment SHLIB_MAPFILES.
+  tmake_file="$tmake_file $cpu_type/t-sol2"
+  extra_parts="gmon.o crtbegin.o crtend.o"
+  case ${host} in
+    i?86-*-solaris2.1[0-9]*)
+      # Solaris 10+/x86 provides crt1.o, crti.o, crtn.o, and gcrt1.o as
+      # part of the base system.
+      ;;
+    sparc*-*-solaris2.1[0-9]*)
+      # Solaris 10+/SPARC lacks crt1.o and gcrt1.o.
+      extra_parts="$extra_parts crt1.o gcrt1.o"
+      ;;
+    *)
+      tmake_file="$tmake_file t-crtin"
+      extra_parts="$extra_parts crt1.o crti.o crtn.o gcrt1.o"
+      ;;
+  esac
+  ;;
 *-*-vxworks*)
   ;;
 *-*-elf)
@@ -309,19 +334,10 @@  i[3456x]86-*-netware*)
 i[34567]86-*-nto-qnx*)
 	;;
 i[34567]86-*-rtems*)
+	extra_parts="crtbegin.o crtend.o crti.o crtn.o"
+	tmake_file="${tmake_file} t-crtin i386/t-softfp i386/t-crtstuff t-rtems"
 	;;
 i[34567]86-*-solaris2*)
-	tmake_file="${tmake_file} i386/t-sol2"
-	case ${host} in
-	*-*-solaris2.1[0-9]*)
-		# Solaris 2.10 provides crt1.o, crti.o, crtn.o, and gcrt1.o as
-		# part of the base system.
-		extra_parts="gmon.o crtbegin.o crtend.o"
-		;;
-	*)
-		extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
-		;;
-	esac
 	;;
 i[4567]86-wrs-vxworks|i[4567]86-wrs-vxworksae)
 	;;
@@ -519,18 +535,31 @@  sparc-*-netbsdelf*)
 sparc64-*-openbsd*)
 	;;
 sparc-*-elf*)
+	case ${host} in
+	*-leon[3-9]*)
+		;;
+	*)
+	  	tmake_file="sparc/t-softmul"
+	  	;;
+	esac
+	tmake_file="${tmake_file} sparc/t-softfp t-crtin t-crtfm"
+	extra_parts="crtbegin.o crtend.o crti.o crtn.o crtfastmath.o"
 	;;
 sparc-*-linux*)		# SPARC's running GNU/Linux, libc6
 	extra_parts="$extra_parts crtfastmath.o"
-	tmake_file="${tmake_file} sparc/t-crtfm"
+	tmake_file="${tmake_file} t-crtfm"
 	;;
 sparc-*-rtems* | sparc64-*-rtems* )
+	tmake_file="sparc/t-elf t-crtin t-crtfm t-rtems"
+	extra_parts="crtbegin.o crtend.o crti.o crtn.o crtfastmath.o"
 	;;
-sparc64-*-solaris2* | sparcv9-*-solaris2*)
-	;;
-sparc-*-solaris2*)
+sparc*-*-solaris2*)
+	tmake_file="$tmake_file t-crtfm"
+	extra_parts="$extra_parts crtfastmath.o"
 	;;
 sparc64-*-elf*)
+	tmake_file="${tmake_file} t-crtin t-crtfm"
+	extra_parts="crtbegin.o crtend.o crti.o crtn.o crtfastmath.o"
 	;;
 sparc-wrs-vxworks)
 	;;
@@ -538,7 +567,7 @@  sparc64-*-freebsd*|ultrasparc-*-freebsd*
 	;;
 sparc64-*-linux*)		# 64-bit SPARC's running GNU/Linux
 	extra_parts="$extra_parts crtfastmath.o"
-	tmake_file="${tmake_file} sparc/t-crtfm"
+	tmake_file="${tmake_file} t-crtfm"
 	;;
 sparc64-*-netbsd*)
 	;;
diff --git a/gcc/config/sparc/gmon-sol2.c b/libgcc/config/gmon-sol2.c
rename from gcc/config/sparc/gmon-sol2.c
rename to libgcc/config/gmon-sol2.c
--- a/gcc/config/sparc/gmon-sol2.c
+++ b/libgcc/config/gmon-sol2.c
@@ -28,32 +28,67 @@ 
  * SUCH DAMAGE.
  */
 
+/* FIXME: Check comment.  */
 /* Mangled into a form that works on SPARC Solaris 2 by Mark Eichin
  * for Cygnus Support, July 1992.
+ *
+ * This is a modified gmon.c by J.W.Hawtin <oolon@ankh.org>,
+ * 14/8/96 based on the original gmon.c in GCC and the hacked version
+ * solaris 2 sparc version (config/sparc/gmon-sol.c) by Mark Eichin. To do
+ * process profiling on solaris 2.X X86
+ *
+ * It must be used in conjunction with sol2-gc1.asm, which is used to start
+ * and stop process monitoring.
+ *
+ * Differences.
+ *
+ * On Solaris 2 _mcount is called by library functions not mcount, so support
+ * has been added for both.
+ *
+ * Also the prototype for profil() is different
+ *
+ * Solaris 2 does not seem to have char *minbrk whcih allows the setting of
+ * the minimum SBRK region so this code has been removed and lets pray malloc
+ * does not mess it up.
+ *
+ * Notes
+ *
+ * This code could easily be integrated with the original gmon.c and perhaps
+ * should be.
  */
-
 #include "tconfig.h"
 #include "tsystem.h"
 #include <fcntl.h> /* for creat() */
 
-#if 0
-#include "sparc/gmon.h"
-#else
+#ifdef DEBUG
+#include <stdio.h>
+#endif
+
+static void moncontrol (int);
+extern void monstartup (char *, char *);
+extern void _mcleanup (void);
+
 struct phdr {
   char *lpc;
   char *hpc;
   int ncnt;
 };
+
+
 #define HISTFRACTION 2
 #define HISTCOUNTER unsigned short
 #define HASHFRACTION 1
 #define ARCDENSITY 2
 #define MINARCS 50
+#define BASEADDRESS 0x8000000 /* On Solaris 2 X86 all executables start here
+				 and not at 0 */ 
+
 struct tostruct {
   char *selfpc;
   long count;
   unsigned short link;
 };
+
 struct rawarc {
     unsigned long       raw_frompc;
     unsigned long       raw_selfpc;
@@ -62,10 +97,14 @@  struct rawarc {
 #define ROUNDDOWN(x,y)  (((x)/(y))*(y))
 #define ROUNDUP(x,y)    ((((x)+(y)-1)/(y))*(y))
 
-#endif
-
 /* extern mcount() asm ("mcount"); */
 /*extern*/ char *minbrk /* asm ("minbrk") */;
+typedef __SIZE_TYPE__ size_t;
+typedef __PTRDIFF_TYPE__ intptr_t;
+
+extern int errno;
+
+extern void *sbrk (intptr_t);
 
     /*
      *	froms is actually a bunch of unsigned shorts indexing tos
@@ -76,7 +115,7 @@  static struct tostruct	*tos = 0;
 static long		tolimit = 0;
 static char		*s_lowpc = 0;
 static char		*s_highpc = 0;
-static unsigned long	s_textsize = 0;
+static size_t		s_textsize = 0;
 
 static int	ssiz;
 static char	*sbuf;
@@ -92,23 +131,23 @@  extern void _mcleanup (void);
 
 void monstartup(char *lowpc, char *highpc)
 {
-    int			monsize;
+    size_t		monsize;
     char		*buffer;
-    register int	o;
+    register size_t	o;
 
 	/*
 	 *	round lowpc and highpc to multiples of the density we're using
 	 *	so the rest of the scaling (here and in gprof) stays in ints.
 	 */
     lowpc = (char *)
-	    ROUNDDOWN((unsigned long)lowpc, HISTFRACTION*sizeof(HISTCOUNTER));
+	    ROUNDDOWN((size_t)lowpc, HISTFRACTION*sizeof(HISTCOUNTER));
     s_lowpc = lowpc;
     highpc = (char *)
-	    ROUNDUP((unsigned long)highpc, HISTFRACTION*sizeof(HISTCOUNTER));
+	    ROUNDUP((size_t)highpc, HISTFRACTION*sizeof(HISTCOUNTER));
     s_highpc = highpc;
     s_textsize = highpc - lowpc;
     monsize = (s_textsize / HISTFRACTION) + sizeof(struct phdr);
-    buffer = sbrk( monsize );
+    buffer = (char *) sbrk( monsize );
     if ( buffer == (char *) -1 ) {
 	write( 2 , MSG , sizeof(MSG) );
 	return;
@@ -206,8 +245,9 @@  _mcleanup(void)
 	return;
     }
 #   ifdef DEBUG
-	fprintf( stderr , "[mcleanup] sbuf 0x%x ssiz %d\n" , sbuf , ssiz );
+	fprintf( stderr , "[mcleanup] sbuf %#x ssiz %d\n" , sbuf , ssiz );
 #   endif /* DEBUG */
+
     write( fd , sbuf , ssiz );
     endfrom = s_textsize / (HASHFRACTION * sizeof(*froms));
     for ( fromindex = 0 ; fromindex < endfrom ; fromindex++ ) {
@@ -218,7 +258,7 @@  _mcleanup(void)
 	for (toindex=froms[fromindex]; toindex!=0; toindex=tos[toindex].link) {
 #	    ifdef DEBUG
 		fprintf( stderr ,
-			"[mcleanup] frompc 0x%x selfpc 0x%x count %d\n" ,
+			"[mcleanup] frompc %#x selfpc %#x count %d\n" ,
 			frompc , tos[toindex].selfpc , tos[toindex].count );
 #	    endif /* DEBUG */
 	    rawarc.raw_frompc = (unsigned long) frompc;
@@ -230,6 +270,7 @@  _mcleanup(void)
     close( fd );
 }
 
+#ifdef __sparc__
 /*
  * The SPARC stack frame is only held together by the frame pointers
  * in the register windows. According to the SVR4 SPARC ABI
@@ -273,25 +314,99 @@  static void internal_mcount (char *, uns
 asm(".global _mcount; _mcount: mov %i7,%o1; mov %o7,%o0;b,a internal_mcount");
 /* This is for compatibility with old versions of gcc which used mcount.  */
 asm(".global mcount; mcount: mov %i7,%o1; mov %o7,%o0;b,a internal_mcount");
+#elif defined __x86_64__
+extern void internal_mcount (char *, unsigned short *);
 
-static void internal_mcount(char *selfpc, unsigned short *frompcindex)
+/* See GLIBC for additional information about this technique.  */
+asm(".globl _mcount\n" 
+    "\t.type\t_mcount, @function\n"
+    "_mcount:\n"
+    /* The compiler calls _mcount after the prologue, and does not
+       save any of the registers.  Therefore we must preserve all
+       seven registers which may contain function arguments.  */
+    "\tsubq\t$0x38,%rsp\n"
+    "\tmovq\t%rax,(%rsp)\n"
+    "\tmovq\t%rcx,0x08(%rsp)\n"
+    "\tmovq\t%rdx,0x10(%rsp)\n"
+    "\tmovq\t%rsi,0x18(%rsp)\n"
+    "\tmovq\t%rdi,0x20(%rsp)\n"
+    "\tmovq\t%r8,0x28(%rsp)\n"
+    "\tmovq\t%r9,0x30(%rsp)\n"
+    /* Get SELFPC (pushed by the call to this function) and
+       FROMPCINDEX (via the frame pointer.  */
+    "\tmovq\t0x38(%rsp),%rdi\n"
+    "\tmovq\t0x8(%rbp),%rsi\n"
+    "\tcall\tinternal_mcount\n"
+    /* Restore the saved registers.  */
+    "\tmovq\t0x30(%rsp),%r9\n"
+    "\tmovq\t0x28(%rsp),%r8\n"
+    "\tmovq\t0x20(%rsp),%rdi\n"
+    "\tmovq\t0x18(%rsp),%rsi\n"
+    "\tmovq\t0x10(%rsp),%rdx\n"
+    "\tmovq\t0x08(%rsp),%rcx\n"
+    "\tmovq\t(%rsp),%rax\n"
+    "\taddq\t$0x38,%rsp\n"
+    "\tretq\n"
+    );
+#else
+extern void internal_mcount (void);
+
+ /* Solaris 2 libraries use _mcount.  */
+asm(".globl _mcount; _mcount: jmp internal_mcount");
+ /* This is for compatibility with old versions of gcc which used mcount.  */
+asm(".globl mcount; mcount: jmp internal_mcount");
+#endif
+
+#ifdef __sparc__
+static
+#endif
+void
+internal_mcount (
+#if defined __sparc__ || defined __x86_64__
+		 char *selfpc,
+		 unsigned short *frompcindex
+#else
+		 void
+#endif
+		 )
 {
+#if !defined __sparc__ && !defined __x86_64__
+	register char			*selfpc;
+	register unsigned short		*frompcindex;
+#endif
 	register struct tostruct	*top;
 	register struct tostruct	*prevtop;
 	register long			toindex;
 	static char already_setup;
 
+#if !defined __sparc__ && !defined __x86_64__
 	/*
 	 *	find the return address for mcount,
 	 *	and the return address for mcount's caller.
 	 */
 
+	/* selfpc = pc pushed by mcount call.
+	   This identifies the function that was just entered.  */
+	selfpc = (void *) __builtin_return_address (0);
+	/* frompcindex = pc in preceding frame.
+	   This identifies the caller of the function just entered.  */
+	frompcindex = (void *) __builtin_return_address (1);
+#endif
+
 	if(!already_setup) {
           extern char etext[];
+#ifdef __sparc__
 	  extern char _start[];
 	  extern char _init[];
+#endif
 	  already_setup = 1;
+#if defined __sparc__
 	  monstartup(_start < _init ? _start : _init, etext);
+#elif defined __x86_64__
+	  monstartup(0, etext);
+#else
+	  monstartup((char*)0x08040000, etext);
+#endif
 #ifdef USE_ONEXIT
 	  on_exit(_mcleanup, 0);
 #else
@@ -410,7 +525,8 @@  static void moncontrol(int mode)
 	/* start */
 	profil((unsigned short *)(sbuf + sizeof(struct phdr)),
 	       ssiz - sizeof(struct phdr),
-	       (long)s_lowpc, s_scale);
+	       (size_t)s_lowpc, s_scale);
+
 	profiling = 0;
     } else {
 	/* stop */
diff --git a/gcc/config/i386/sol2-c1.asm b/libgcc/config/i386/sol2-c1.S
rename from gcc/config/i386/sol2-c1.asm
rename to libgcc/config/i386/sol2-c1.S
--- a/gcc/config/i386/sol2-c1.asm
+++ b/libgcc/config/i386/sol2-c1.S
@@ -1,46 +1,56 @@ 
-! crt1.s for Solaris 2, x86
+/* crt1.s for Solaris 2, x86
 
-!   Copyright (C) 1993, 1998, 2008, 2009 Free Software Foundation, Inc.
-!   Written By Fred Fish, Nov 1992
-! 
-! This file is free software; you can redistribute it and/or modify it
-! under the terms of the GNU General Public License as published by the
-! Free Software Foundation; either version 3, or (at your option) any
-! later version.
-! 
-! This file is distributed in the hope that it will be useful, but
-! WITHOUT ANY WARRANTY; without even the implied warranty of
-! MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-! General Public License for more details.
-! 
-! Under Section 7 of GPL version 3, you are granted additional
-! permissions described in the GCC Runtime Library Exception, version
-! 3.1, as published by the Free Software Foundation.
-!
-! You should have received a copy of the GNU General Public License and
-! a copy of the GCC Runtime Library Exception along with this program;
-! see the files COPYING3 and COPYING.RUNTIME respectively.  If not, see
-! <http://www.gnu.org/licenses/>.
+   Copyright (C) 1993, 1998, 2008, 2009, 2011 Free Software Foundation, Inc.
+   Written By Fred Fish, Nov 1992
 
+This file is free software; you can redistribute it and/or modify it
+under the terms of the GNU General Public License as published by the
+Free Software Foundation; either version 3, or (at your option) any
+later version.
 
-! This file takes control of the process from the kernel, as specified
-! in section 3 of the System V Application Binary Interface, Intel386
-! Processor Supplement.  It has been constructed from information obtained
-! from the ABI, information obtained from single stepping existing
-! Solaris executables through their startup code with gdb, and from
-! information obtained by single stepping executables on other i386 SVR4
-! implementations.  This file is the first thing linked into any executable.
+This file is distributed in the hope that it will be useful, but
+WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+General Public License for more details.
 
+Under Section 7 of GPL version 3, you are granted additional
+permissions described in the GCC Runtime Library Exception, version
+3.1, as published by the Free Software Foundation.
+
+You should have received a copy of the GNU General Public License and
+a copy of the GCC Runtime Library Exception along with this program;
+see the files COPYING3 and COPYING.RUNTIME respectively.  If not, see
+<http://www.gnu.org/licenses/>.  */
+
+
+/* This file takes control of the process from the kernel, as specified
+   in section 3 of the System V Application Binary Interface, Intel386
+   Processor Supplement.  It has been constructed from information obtained
+   from the ABI, information obtained from single stepping existing
+   Solaris executables through their startup code with gdb, and from
+   information obtained by single stepping executables on other i386 SVR4
+   implementations.  This file is the first thing linked into any
+   executable.  */
+
+#ifndef GCRT1
 	.ident	"GNU C crt1.s"
+#define CLEANUP	_cleanup
+#else
+/* This is a modified crt1.s by J.W.Hawtin <oolon@ankh.org> 15/8/96, 
+   to allow program profiling, by calling monstartup on entry and _mcleanup 
+   on exit.  */
+	.ident	"GNU C gcrt1.s"
+#define CLEANUP _mcleanup
+#endif
 	.weak	_cleanup
 	.weak	_DYNAMIC
 	.text
 
-! Start creating the initial frame by pushing a NULL value for the return
-! address of the initial frame, and mark the end of the stack frame chain
-! (the innermost stack frame) with a NULL value, per page 3-32 of the ABI.
-! Initialize the first stack frame pointer in %ebp (the contents of which
-! are unspecified at process initialization).
+/* Start creating the initial frame by pushing a NULL value for the return
+   address of the initial frame, and mark the end of the stack frame chain
+   (the innermost stack frame) with a NULL value, per page 3-32 of the ABI.
+   Initialize the first stack frame pointer in %ebp (the contents of which
+   are unspecified at process initialization).  */
 
 	.globl	_start
 _start:
@@ -48,29 +58,29 @@  _start:
 	pushl	$0x0
 	movl	%esp,%ebp
 
-! As specified per page 3-32 of the ABI, %edx contains a function 
-! pointer that should be registered with atexit(), for proper
-! shared object termination.  Just push it onto the stack for now
-! to preserve it.  We want to register _cleanup() first.
+/* As specified per page 3-32 of the ABI, %edx contains a function 
+   pointer that should be registered with atexit(), for proper
+   shared object termination.  Just push it onto the stack for now
+   to preserve it.  We want to register _cleanup() first.  */
 
 	pushl	%edx
 
-! Check to see if there is an _cleanup() function linked in, and if
-! so, register it with atexit() as the last thing to be run by
-! atexit().
+/* Check to see if there is an _cleanup() function linked in, and if
+   so, register it with atexit() as the last thing to be run by
+   atexit().  */
 
-	movl	$_cleanup,%eax
+	movl	$CLEANUP,%eax
 	testl	%eax,%eax
 	je	.L1
-	pushl	$_cleanup
+	pushl	$CLEANUP
 	call	atexit
 	addl	$0x4,%esp
 .L1:
 
-! Now check to see if we have an _DYNAMIC table, and if so then
-! we need to register the function pointer previously in %edx, but
-! now conveniently saved on the stack as the argument to pass to
-! atexit().
+/* Now check to see if we have an _DYNAMIC table, and if so then
+   we need to register the function pointer previously in %edx, but
+   now conveniently saved on the stack as the argument to pass to
+   atexit().  */
 
 	movl	$_DYNAMIC,%eax
 	testl	%eax,%eax
@@ -78,74 +88,86 @@  _start:
 	call	atexit
 .L2:
 
-! Register _fini() with atexit().  We will take care of calling _init()
-! directly.
+/* Register _fini() with atexit().  We will take care of calling _init()
+   directly.  */
 
 	pushl	$_fini
 	call	atexit
 
-! Compute the address of the environment vector on the stack and load
-! it into the global variable _environ.  Currently argc is at 8 off
-! the frame pointer.  Fetch the argument count into %eax, scale by the
-! size of each arg (4 bytes) and compute the address of the environment
-! vector which is 16 bytes (the two zero words we pushed, plus argc,
-! plus the null word terminating the arg vector) further up the stack,
-! off the frame pointer (whew!).
+#ifdef GCRT1
+/* Start profiling.  */
+
+        pushl %ebp
+        movl %esp,%ebp
+        pushl $_etext
+        pushl $_start
+        call monstartup
+        addl $8,%esp
+	popl %ebp
+#endif
+
+/* Compute the address of the environment vector on the stack and load
+   it into the global variable _environ.  Currently argc is at 8 off
+   the frame pointer.  Fetch the argument count into %eax, scale by the
+   size of each arg (4 bytes) and compute the address of the environment
+   vector which is 16 bytes (the two zero words we pushed, plus argc,
+   plus the null word terminating the arg vector) further up the stack,
+   off the frame pointer (whew!).  */
 
 	movl	8(%ebp),%eax
 	leal	16(%ebp,%eax,4),%edx
 	movl	%edx,_environ
 
-! Push the environment vector pointer, the argument vector pointer,
-! and the argument count on to the stack to set up the arguments
-! for _init(), _fpstart(), and main().  Note that the environment
-! vector pointer and the arg count were previously loaded into
-! %edx and %eax respectively.  The only new value we need to compute
-! is the argument vector pointer, which is at a fixed address off
-! the initial frame pointer.
+/* Push the environment vector pointer, the argument vector pointer,
+   and the argument count on to the stack to set up the arguments
+   for _init(), _fpstart(), and main().  Note that the environment
+   vector pointer and the arg count were previously loaded into
+   %edx and %eax respectively.  The only new value we need to compute
+   is the argument vector pointer, which is at a fixed address off
+   the initial frame pointer.  */
 
-!
-! Make sure the stack is properly aligned.
-!
+/* Make sure the stack is properly aligned.  */
 	andl $0xfffffff0,%esp
 	subl $4,%esp
-	
+
 	pushl	%edx
 	leal	12(%ebp),%edx
 	pushl	%edx
 	pushl	%eax
 
-! Call _init(argc, argv, environ), _fpstart(argc, argv, environ), and
-! main(argc, argv, environ).
+/* Call _init(argc, argv, environ), _fpstart(argc, argv, environ), and
+   main(argc, argv, environ).  */
 
 	call	_init
 	call	__fpstart
 	call	main
 
-! Pop the argc, argv, and environ arguments off the stack, push the
-! value returned from main(), and call exit().
+/* Pop the argc, argv, and environ arguments off the stack, push the
+   value returned from main(), and call exit().  */
 
 	addl	$12,%esp
 	pushl	%eax
 	call	exit
 
-! An inline equivalent of _exit, as specified in Figure 3-26 of the ABI.
+/* An inline equivalent of _exit, as specified in Figure 3-26 of the ABI.  */
 
 	pushl	$0x0
 	movl	$0x1,%eax
 	lcall	$7,$0
 
-! If all else fails, just try a halt!
+/* If all else fails, just try a halt!  */
 
 	hlt
 	.type	_start,@function
 	.size	_start,.-_start
 
-! A dummy profiling support routine for non-profiling executables,
-! in case we link in some objects that have been compiled for profiling.
+#ifndef GCRT1
+/* A dummy profiling support routine for non-profiling executables,
+   in case we link in some objects that have been compiled for profiling.  */
 
 	.weak	_mcount
 _mcount:
 	ret
 	.type	_mcount,@function
 	.size	_mcount,.-_mcount
+#endif
diff --git a/gcc/config/i386/sol2-ci.asm b/libgcc/config/i386/sol2-ci.S
rename from gcc/config/i386/sol2-ci.asm
rename to libgcc/config/i386/sol2-ci.S
--- a/gcc/config/i386/sol2-ci.asm
+++ b/libgcc/config/i386/sol2-ci.S
@@ -1,31 +1,31 @@ 
-! crti.s for Solaris 2, x86.
+/* crti.s for Solaris 2, x86.
 
-!   Copyright (C) 1993, 2008, 2009 Free Software Foundation, Inc.
-!   Written By Fred Fish, Nov 1992
-! 
-! This file is free software; you can redistribute it and/or modify it
-! under the terms of the GNU General Public License as published by the
-! Free Software Foundation; either version 3, or (at your option) any
-! later version.
-! 
-! This file is distributed in the hope that it will be useful, but
-! WITHOUT ANY WARRANTY; without even the implied warranty of
-! MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-! General Public License for more details.
-! 
-! Under Section 7 of GPL version 3, you are granted additional
-! permissions described in the GCC Runtime Library Exception, version
-! 3.1, as published by the Free Software Foundation.
-!
-! You should have received a copy of the GNU General Public License and
-! a copy of the GCC Runtime Library Exception along with this program;
-! see the files COPYING3 and COPYING.RUNTIME respectively.  If not, see
-! <http://www.gnu.org/licenses/>.
+   Copyright (C) 1993, 2008, 2009 Free Software Foundation, Inc.
+   Written By Fred Fish, Nov 1992
+ 
+This file is free software; you can redistribute it and/or modify it
+under the terms of the GNU General Public License as published by the
+Free Software Foundation; either version 3, or (at your option) any
+later version.
 
+This file is distributed in the hope that it will be useful, but
+WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+General Public License for more details.
 
-! This file just supplies labeled starting points for the .init and .fini
-! sections.  It is linked in before the values-Xx.o files and also before
-! crtbegin.o.
+Under Section 7 of GPL version 3, you are granted additional
+permissions described in the GCC Runtime Library Exception, version
+3.1, as published by the Free Software Foundation.
+
+You should have received a copy of the GNU General Public License and
+a copy of the GCC Runtime Library Exception along with this program;
+see the files COPYING3 and COPYING.RUNTIME respectively.  If not, see
+<http://www.gnu.org/licenses/>.  */
+
+
+/* This file just supplies labeled starting points for the .init and .fini
+   sections.  It is linked in before the values-Xx.o files and also before
+   crtbegin.o.  */
  
 	.ident	"GNU C crti.s"
 
diff --git a/gcc/config/i386/sol2-cn.asm b/libgcc/config/i386/sol2-cn.S
rename from gcc/config/i386/sol2-cn.asm
rename to libgcc/config/i386/sol2-cn.S
--- a/gcc/config/i386/sol2-cn.asm
+++ b/libgcc/config/i386/sol2-cn.S
@@ -1,30 +1,30 @@ 
-! crtn.s for Solaris 2, x86.
+/* crtn.s for Solaris 2, x86.
 
-!   Copyright (C) 1993, 2008, 2009 Free Software Foundation, Inc.
-!   Written By Fred Fish, Nov 1992
-! 
-! This file is free software; you can redistribute it and/or modify it
-! under the terms of the GNU General Public License as published by the
-! Free Software Foundation; either version 3, or (at your option) any
-! later version.
-! 
-! This file is distributed in the hope that it will be useful, but
-! WITHOUT ANY WARRANTY; without even the implied warranty of
-! MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-! General Public License for more details.
-! 
-! Under Section 7 of GPL version 3, you are granted additional
-! permissions described in the GCC Runtime Library Exception, version
-! 3.1, as published by the Free Software Foundation.
-!
-! You should have received a copy of the GNU General Public License and
-! a copy of the GCC Runtime Library Exception along with this program;
-! see the files COPYING3 and COPYING.RUNTIME respectively.  If not, see
-! <http://www.gnu.org/licenses/>.
+   Copyright (C) 1993, 2008, 2009 Free Software Foundation, Inc.
+   Written By Fred Fish, Nov 1992
+ 
+This file is free software; you can redistribute it and/or modify it
+under the terms of the GNU General Public License as published by the
+Free Software Foundation; either version 3, or (at your option) any
+later version.
 
+This file is distributed in the hope that it will be useful, but
+WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+General Public License for more details.
 
-! This file just supplies returns for the .init and .fini sections.  It is
-! linked in after all other files.
+Under Section 7 of GPL version 3, you are granted additional
+permissions described in the GCC Runtime Library Exception, version
+3.1, as published by the Free Software Foundation.
+
+You should have received a copy of the GNU General Public License and
+a copy of the GCC Runtime Library Exception along with this program;
+see the files COPYING3 and COPYING.RUNTIME respectively.  If not, see
+<http://www.gnu.org/licenses/>.  */
+
+
+/* This file just supplies returns for the .init and .fini sections.  It is
+   linked in after all other files.  */
 
 	.ident	"GNU C crtn.o"
 
diff --git a/libgcc/config/i386/t-crtfm b/libgcc/config/i386/t-crtfm
--- a/libgcc/config/i386/t-crtfm
+++ b/libgcc/config/i386/t-crtfm
@@ -1,5 +1,4 @@ 
 # This is an endfile, Use -minline-all-stringops to ensure
 # that __builtin_memset doesn't refer to the lib function memset().
 crtfastmath.o: $(gcc_srcdir)/config/i386/crtfastmath.c
-	$(gcc_compile) -msse -minline-all-stringops -c \
-	$(gcc_srcdir)/config/i386/crtfastmath.c
+	$(gcc_compile) -msse -minline-all-stringops -c $<
diff --git a/gcc/config/i386/t-crtstuff b/libgcc/config/i386/t-crtstuff
copy from gcc/config/i386/t-crtstuff
copy to libgcc/config/i386/t-crtstuff
diff --git a/gcc/config/i386/t-rtems-i386 b/libgcc/config/i386/t-softfp
copy from gcc/config/i386/t-rtems-i386
copy to libgcc/config/i386/t-softfp
--- a/gcc/config/i386/t-rtems-i386
+++ b/libgcc/config/i386/t-softfp
@@ -1,4 +1,5 @@ 
-# Copyright (C) 1999, 2001, 2002, 2005, 2007 Free Software Foundation, Inc.
+# Copyright (C) 1999, 2001, 2002, 2005, 2007, 2011
+# Free Software Foundation, Inc.
 #
 # This file is part of GCC.
 #
@@ -15,55 +16,27 @@ 
 # You should have received a copy of the GNU General Public License
 # along with GCC; see the file COPYING3.  If not see
 # <http://www.gnu.org/licenses/>.
-#
-#
-# This file was based on t-sol2 - x68 Solaris implementation. Actually,
-# the source code to create crti.o anf crtn.o are exactly the same 
-# as the ones for Solaris. Later, we might want to have a RTEMS's 
-# version of these files.
-#
-
-$(T)crti.o: $(srcdir)/config/i386/sol2-ci.asm $(GCC_PASSES)
-	sed -e '/^!/d' <$(srcdir)/config/i386/sol2-ci.asm >crti.s
-	$(GCC_FOR_TARGET) -c -o $(T)crti.o crti.s
-$(T)crtn.o: $(srcdir)/config/i386/sol2-cn.asm $(GCC_PASSES)
-	sed -e '/^!/d' <$(srcdir)/config/i386/sol2-cn.asm >crtn.s
-	$(GCC_FOR_TARGET) -c -o $(T)crtn.o crtn.s
 
 # We want fine grained libraries, so use the new code to build the
 # floating point emulation libraries.
 FPBIT = fp-bit.c
 DPBIT = dp-bit.c
 
-LIB2FUNCS_EXTRA = xp-bit.c
+LIB2ADD = += $(gcc_srcdir)/config/xp-bit.c
 
-dp-bit.c: $(srcdir)/config/fp-bit.c
-	echo '#ifdef __LITTLE_ENDIAN__' > dp-bit.c
-	echo '#define FLOAT_BIT_ORDER_MISMATCH' >>dp-bit.c
-	echo '#endif'           >> dp-bit.c
-	cat $(srcdir)/config/fp-bit.c >> dp-bit.c
+$(gcc_objdir)/dp-bit.c: $(gcc_srcdir)/config/fp-bit.c
+	echo '#ifdef __LITTLE_ENDIAN__'		> $@
+	echo '#define FLOAT_BIT_ORDER_MISMATCH'	>> $@
+	echo '#endif'				>> $@
+	cat $<					>> $@
 
-fp-bit.c: $(srcdir)/config/fp-bit.c
-	echo '#define FLOAT' > fp-bit.c
-	echo '#ifdef __LITTLE_ENDIAN__' >> fp-bit.c
-	echo '#define FLOAT_BIT_ORDER_MISMATCH' >>fp-bit.c
-	echo '#endif'           >> fp-bit.c
-	cat $(srcdir)/config/fp-bit.c >> fp-bit.c
+$(gcc_objdir)/fp-bit.c: $(gcc_srcdir)/config/fp-bit.c
+	echo '#define FLOAT'			> $@
+	echo '#ifdef __LITTLE_ENDIAN__'		>> $@
+	echo '#define FLOAT_BIT_ORDER_MISMATCH'	>> $@
+	echo '#endif'				>> $@
+	cat $<					>> $@
 
-xp-bit.c: $(srcdir)/config/fp-bit.c
-	echo '#define EXTENDED_FLOAT_STUBS' > xp-bit.c
-	cat $(srcdir)/config/fp-bit.c >> xp-bit.c
-
-MULTILIB_OPTIONS = mtune=i486/mtune=pentium/mtune=pentiumpro \
-msoft-float
-MULTILIB_DIRNAMES= m486 mpentium mpentiumpro soft-float
-MULTILIB_MATCHES = msoft-float=mno-m80387
-MULTILIB_MATCHES += mtune?pentium=mtune?k6 mtune?pentiumpro=mtune?mathlon
-MULTILIB_EXCEPTIONS = \
-mtune=pentium/*msoft-float* \
-mtune=pentiumpro/*msoft-float*
-
-EXTRA_MULTILIB_PARTS = crtbegin.o crtend.o
-
-LIBGCC = stmp-multilib
-INSTALL_LIBGCC = install-multilib
+$(gcc_objdir)/xp-bit.c: $(gcc_srcdir)/config/fp-bit.c
+	echo '#define EXTENDED_FLOAT_STUBS'	> $@
+	cat $<					>> $@
diff --git a/libgcc/config/i386/t-sol2 b/libgcc/config/i386/t-sol2
--- a/libgcc/config/i386/t-sol2
+++ b/libgcc/config/i386/t-sol2
@@ -1,25 +1,3 @@ 
-# gmon build rule:
-$(T)gmon.o:	$(gcc_srcdir)/config/i386/gmon-sol2.c $(GCC_PASSES) $(CONFIG_H)
-	$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(CFLAGS) \
-		-c $(gcc_srcdir)/config/i386/gmon-sol2.c -o $(T)gmon.o
-
-# Assemble startup files.
-# Apparently Sun believes that assembler files don't need comments, because no
-# single ASCII character is valid (tried them all).  So we manually strip out
-# the comments with sed.  This bug may only be in the Early Access releases.
-$(T)gcrt1.o: $(gcc_srcdir)/config/i386/sol2-gc1.asm $(GCC_PASSES)
-	sed -e '/^!/d' <$(gcc_srcdir)/config/i386/sol2-gc1.asm >gcrt1.s
-	$(GCC_FOR_TARGET) $(CFLAGS) -c -o $(T)gcrt1.o gcrt1.s
-$(T)crt1.o: $(gcc_srcdir)/config/i386/sol2-c1.asm $(GCC_PASSES)
-	sed -e '/^!/d' <$(gcc_srcdir)/config/i386/sol2-c1.asm >crt1.s
-	$(GCC_FOR_TARGET) $(CFLAGS) -c -o $(T)crt1.o crt1.s
-$(T)crti.o: $(gcc_srcdir)/config/i386/sol2-ci.asm $(GCC_PASSES)
-	sed -e '/^!/d' <$(gcc_srcdir)/config/i386/sol2-ci.asm >crti.s
-	$(GCC_FOR_TARGET) $(CFLAGS) -c -o $(T)crti.o crti.s
-$(T)crtn.o: $(gcc_srcdir)/config/i386/sol2-cn.asm $(GCC_PASSES)
-	sed -e '/^!/d' <$(gcc_srcdir)/config/i386/sol2-cn.asm >crtn.s
-	$(GCC_FOR_TARGET) $(CFLAGS) -c -o $(T)crtn.o crtn.s
-
 # We need to use -fPIC when we are using gcc to compile the routines in
 # crtstuff.c.  This is only really needed when we are going to use gcc/g++
 # to produce a shared library, but since we don't know ahead of time when
@@ -29,9 +7,7 @@ 
 # We must also enable optimization to avoid having any code appear after
 # the call & alignment statement, but before we switch back to the
 # .text section.
-
 CRTSTUFF_T_CFLAGS = -fPIC -O2
-TARGET_LIBGCC2_CFLAGS = -fPIC
 
 # Add support for the introduction of 128-bit long double.
 SHLIB_MAPFILES += $(srcdir)/config/i386/libgcc-sol2.ver
diff --git a/gcc/config/sparc/sol2-c1.asm b/libgcc/config/sparc/sol2-c1.S
rename from gcc/config/sparc/sol2-c1.asm
rename to libgcc/config/sparc/sol2-c1.S
diff --git a/gcc/config/sparc/sol2-ci.asm b/libgcc/config/sparc/sol2-ci.S
rename from gcc/config/sparc/sol2-ci.asm
rename to libgcc/config/sparc/sol2-ci.S
diff --git a/gcc/config/sparc/sol2-cn.asm b/libgcc/config/sparc/sol2-cn.S
rename from gcc/config/sparc/sol2-cn.asm
rename to libgcc/config/sparc/sol2-cn.S
diff --git a/libgcc/config/sparc/t-softfp b/libgcc/config/sparc/t-softfp
new file mode 100644
--- /dev/null
+++ b/libgcc/config/sparc/t-softfp
@@ -0,0 +1,29 @@ 
+# Copyright (C) 2010, 2011 Free Software Foundation, Inc.
+#
+# This file is part of GCC.
+#
+# GCC is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3, or (at your option)
+# any later version.
+#
+# GCC is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GCC; see the file COPYING3.  If not see
+# <http://www.gnu.org/licenses/>.
+
+# We want fine grained libraries, so use the new code to build the
+# floating point emulation libraries.
+FPBIT = fp-bit.c
+DPBIT = dp-bit.c
+
+$(gcc_objdir)/dp-bit.c: $(gcc_srcdir)/config/fp-bit.c
+	cat $<			> $@
+
+$(gcc_objdir)/fp-bit.c: $(gcc_srcdir)/config/fp-bit.c
+	echo '#define FLOAT'	> $@
+	cat $<			>> $@
diff --git a/libgcc/config/sparc/t-softmul b/libgcc/config/sparc/t-softmul
new file mode 100644
--- /dev/null
+++ b/libgcc/config/sparc/t-softmul
@@ -0,0 +1,2 @@ 
+LIB1ASMSRC = sparc/lb1spc.asm
+LIB1ASMFUNCS = _mulsi3 _divsi3 _modsi3
diff --git a/gcc/config/sparc/t-sol2 b/libgcc/config/sparc/t-sol2
rename from gcc/config/sparc/t-sol2
rename to libgcc/config/sparc/t-sol2
--- a/gcc/config/sparc/t-sol2
+++ b/libgcc/config/sparc/t-sol2
@@ -1,39 +1,6 @@ 
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 2000, 2001,
-# 2002 Free Software Foundation, Inc.
-#
-# This file is part of GCC.
-#
-# GCC is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3, or (at your option)
-# any later version.
-#
-# GCC is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with GCC; see the file COPYING3.  If not see
-# <http://www.gnu.org/licenses/>.
-
-# gmon build rule:
-$(T)gmon.o:	$(srcdir)/config/sparc/gmon-sol2.c $(GCC_PASSES) \
-  $(TCONFIG_H) tsystem.h coretypes.h $(TM_H) stmp-int-hdrs
-	$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(MULTILIB_CFLAGS) \
-		-c $(srcdir)/config/sparc/gmon-sol2.c -o $(T)gmon.o
-
-# Assemble startup files.
-$(T)crt1.o: $(srcdir)/config/sparc/sol2-c1.asm $(GCC_PASSES)
-	$(GCC_FOR_TARGET) $(MULTILIB_CFLAGS) -c -o $(T)crt1.o -x assembler-with-cpp $(srcdir)/config/sparc/sol2-c1.asm
-$(T)gcrt1.o: $(srcdir)/config/sparc/sol2-c1.asm $(GCC_PASSES)
-	$(GCC_FOR_TARGET) $(MULTILIB_CFLAGS) -c -DGCRT1 -o $(T)gcrt1.o -x assembler-with-cpp $(srcdir)/config/sparc/sol2-c1.asm
-
 # We need to use -fPIC when we are using gcc to compile the routines in
 # crtstuff.c.  This is only really needed when we are going to use gcc/g++
 # to produce a shared library, but since we don't know ahead of time when
 # we will be doing that, we just always use -fPIC when compiling the
 # routines in crtstuff.c.
-
 CRTSTUFF_T_CFLAGS = -fPIC
-TARGET_LIBGCC2_CFLAGS = -fPIC
diff --git a/libgcc/config/sparc/t-crtfm b/libgcc/config/t-crtfm
rename from libgcc/config/sparc/t-crtfm
rename to libgcc/config/t-crtfm
--- a/libgcc/config/sparc/t-crtfm
+++ b/libgcc/config/t-crtfm
@@ -1,2 +1,2 @@ 
-crtfastmath.o: $(gcc_srcdir)/config/sparc/crtfastmath.c
-	$(gcc_compile) -c $(gcc_srcdir)/config/sparc/crtfastmath.c
+crtfastmath.o: $(gcc_srcdir)/config/$(cpu_type)/crtfastmath.c
+	$(gcc_compile) -c $<
diff --git a/gcc/config/sparc/t-crtin b/libgcc/config/t-crtin
rename from gcc/config/sparc/t-crtin
rename to libgcc/config/t-crtin
--- a/gcc/config/sparc/t-crtin
+++ b/libgcc/config/t-crtin
@@ -1,6 +1,4 @@ 
-EXTRA_PARTS += crti.o crtn.o
-
-$(T)crti.o: $(srcdir)/config/sparc/sol2-ci.asm $(GCC_PASSES)
-	$(GCC_FOR_TARGET) $(MULTILIB_CFLAGS) -c -o $(T)crti.o -x assembler-with-cpp $(srcdir)/config/sparc/sol2-ci.asm
-$(T)crtn.o: $(srcdir)/config/sparc/sol2-cn.asm $(GCC_PASSES)
-	$(GCC_FOR_TARGET) $(MULTILIB_CFLAGS) -c -o $(T)crtn.o -x assembler-with-cpp $(srcdir)/config/sparc/sol2-cn.asm
+crti.o: $(srcdir)/config/$(cpu_type)/sol2-ci.S
+	$(crt_compile) -c $<
+crtn.o: $(srcdir)/config/$(cpu_type)/sol2-cn.S
+	$(crt_compile) -c $<
diff --git a/gcc/config/t-rtems b/libgcc/config/t-rtems
copy from gcc/config/t-rtems
copy to libgcc/config/t-rtems
--- a/gcc/config/t-rtems
+++ b/libgcc/config/t-rtems
@@ -1,7 +1,4 @@ 
-# RTEMS always has limits.h.
-LIMITS_H_TEST = true
-
 # If we are building next to newlib, this will let us find the RTEMS
 # limits.h when building libgcc2.  Otherwise, newlib must be installed
 # first.
-LIBGCC2_INCLUDES = -I$(srcdir)/../newlib/libc/sys/rtems/include
+HOST_LIBGCC2_CFLAGS = -I$(srcdir)/../newlib/libc/sys/rtems/include
diff --git a/gcc/config/t-slibgcc-sld b/libgcc/config/t-slibgcc
rename from gcc/config/t-slibgcc-sld
rename to libgcc/config/t-slibgcc
--- a/gcc/config/t-slibgcc-sld
+++ b/libgcc/config/t-slibgcc
@@ -1,4 +1,5 @@ 
-# Copyright (C) 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
+# Copyright (C) 2001, 2002, 2003, 2004, 2005, 2011
+# Free Software Foundation, Inc.
 #
 # This file is part of GCC.
 #
@@ -16,35 +17,35 @@ 
 # along with GCC; see the file COPYING3.  If not see
 # <http://www.gnu.org/licenses/>.
 
-# Build a shared libgcc library with the Solaris linker.
+# Build a shared libgcc library.
 
 SHLIB_EXT = .so
 SHLIB_SOLINK = @shlib_base_name@.so
-SHLIB_SONAME = @shlib_base_name@.so.1
+SHLIB_SOVERSION = 1
+SHLIB_SONAME = @shlib_base_name@.so.$(SHLIB_SOVERSION)
 SHLIB_MAP = @shlib_map_file@
 SHLIB_OBJS = @shlib_objs@
 SHLIB_DIR = @multilib_dir@
 SHLIB_SLIBDIR_QUAL = @shlib_slibdir_qual@
+SHLIB_LC = -lc
+SHLIB_MAKE_SOLINK = $(LN_S) $(SHLIB_SONAME) $(SHLIB_DIR)/$(SHLIB_SOLINK)
+SHLIB_INSTALL_SOLINK = $(LN_S) $(SHLIB_SONAME) \
+	$(DESTDIR)$(slibdir)$(SHLIB_SLIBDIR_QUAL)/$(SHLIB_SOLINK)
 
-SHLIB_LINK = $(GCC_FOR_TARGET) $(LIBGCC2_CFLAGS) -shared -nodefaultlibs \
-	-Wl,-h,$(SHLIB_SONAME) -Wl,-z,text -Wl,-z,defs \
-	-Wl,-M,$(SHLIB_MAP) -o $(SHLIB_DIR)/$(SHLIB_SONAME).tmp \
-	@multilib_flags@ $(SHLIB_OBJS) -lc && \
+SHLIB_LINK = $(CC) $(LIBGCC2_CFLAGS) -shared -nodefaultlibs \
+	$(SHLIB_LDFLAGS) \
+	-o $(SHLIB_DIR)/$(SHLIB_SONAME).tmp @multilib_flags@ \
+	$(SHLIB_OBJS) $(SHLIB_LC) && \
 	rm -f $(SHLIB_DIR)/$(SHLIB_SOLINK) && \
 	if [ -f $(SHLIB_DIR)/$(SHLIB_SONAME) ]; then \
 	  mv -f $(SHLIB_DIR)/$(SHLIB_SONAME) \
 		$(SHLIB_DIR)/$(SHLIB_SONAME).backup; \
 	else true; fi && \
 	mv $(SHLIB_DIR)/$(SHLIB_SONAME).tmp $(SHLIB_DIR)/$(SHLIB_SONAME) && \
-	$(LN_S) $(SHLIB_SONAME) $(SHLIB_DIR)/$(SHLIB_SOLINK)
-# $(slibdir) double quoted to protect it from expansion while building
-# libgcc.mk.  We want this delayed until actual install time.
+	$(SHLIB_MAKE_SOLINK)
 SHLIB_INSTALL = \
-	$$(mkinstalldirs) $$(DESTDIR)$$(slibdir)$(SHLIB_SLIBDIR_QUAL); \
+	$(mkinstalldirs) $(DESTDIR)$(slibdir)$(SHLIB_SLIBDIR_QUAL); \
 	$(INSTALL_DATA) $(SHLIB_DIR)/$(SHLIB_SONAME) \
-	  $$(DESTDIR)$$(slibdir)$(SHLIB_SLIBDIR_QUAL)/$(SHLIB_SONAME); \
-	rm -f $$(DESTDIR)$$(slibdir)$(SHLIB_SLIBDIR_QUAL)/$(SHLIB_SOLINK); \
-	$(LN_S) $(SHLIB_SONAME) \
-	  $$(DESTDIR)$$(slibdir)$(SHLIB_SLIBDIR_QUAL)/$(SHLIB_SOLINK)
-SHLIB_MKMAP = $(srcdir)/mkmap-symver.awk
-SHLIB_MAPFILES = $$(libgcc_objdir)/libgcc-std.ver
+	  $(DESTDIR)$(slibdir)$(SHLIB_SLIBDIR_QUAL)/$(SHLIB_SONAME); \
+	rm -f $(DESTDIR)$(slibdir)$(SHLIB_SLIBDIR_QUAL)/$(SHLIB_SOLINK); \
+	$(SHLIB_INSTALL_SOLINK)
diff --git a/libgcc/config/t-slibgcc-elf-ver b/libgcc/config/t-slibgcc-elf-ver
new file mode 100644
--- /dev/null
+++ b/libgcc/config/t-slibgcc-elf-ver
@@ -0,0 +1,4 @@ 
+# Build a shared libgcc library for ELF with symbol versioning.
+
+SHLIB_MKMAP = $(srcdir)/mkmap-symver.awk
+SHLIB_MAPFILES = libgcc-std.ver
diff --git a/libgcc/config/t-slibgcc-gld b/libgcc/config/t-slibgcc-gld
new file mode 100644
--- /dev/null
+++ b/libgcc/config/t-slibgcc-gld
@@ -0,0 +1,5 @@ 
+# Build a shared libgcc library for ELF with symbol versioning
+# with the GNU linker.
+
+SHLIB_LDFLAGS = -Wl,--soname=$(SHLIB_SONAME) \
+	-Wl,--version-script=$(SHLIB_MAP)
diff --git a/libgcc/config/t-slibgcc-sld b/libgcc/config/t-slibgcc-sld
new file mode 100644
--- /dev/null
+++ b/libgcc/config/t-slibgcc-sld
@@ -0,0 +1,5 @@ 
+# Build a shared libgcc library for ELF with symbol versioning
+# with the Solaris linker.
+
+SHLIB_LDFLAGS = -Wl,-h,$(SHLIB_SONAME) -Wl,-z,text -Wl,-z,defs \
+	-Wl,-M,$(SHLIB_MAP)
diff --git a/gcc/config/t-sol2 b/libgcc/config/t-sol2
copy from gcc/config/t-sol2
copy to libgcc/config/t-sol2
--- a/gcc/config/t-sol2
+++ b/libgcc/config/t-sol2
@@ -16,21 +16,19 @@ 
 # along with GCC; see the file COPYING3.  If not see
 # <http://www.gnu.org/licenses/>.
 
-# Solaris-specific format checking and pragmas
-sol2-c.o: $(srcdir)/config/sol2-c.c $(CONFIG_H) $(SYSTEM_H) coretypes.h \
-  tree.h c-family/c-format.h $(C_PRAGMA_H) $(C_COMMON_H) $(CPPLIB_H) \
-  intl.h $(TM_H) $(TM_P_H)
-	$(COMPILER) -c $(ALL_COMPILERFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
-	  $(srcdir)/config/sol2-c.c
-
-# Solaris-specific attributes
-sol2.o: $(srcdir)/config/sol2.c $(CONFIG_H) $(SYSTEM_H) coretypes.h \
-  tree.h output.h $(TM_H) $(TARGET_H) $(TM_P_H) $(GGC_H)
-	$(COMPILER) -c $(ALL_COMPILERFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
-	  $(srcdir)/config/sol2.c
-
 # Use unwind-dw2-fde-glibc.c.  Unless linker support and dl_iterate_phdr
 # are present, automatically falls back to unwind-dw2-fde.c.
 LIB2ADDEH = $(srcdir)/unwind-dw2.c $(srcdir)/unwind-dw2-fde-glibc.c \
   $(srcdir)/unwind-sjlj.c $(srcdir)/unwind-c.c
-LIB2ADDEHDEP = unwind.inc unwind-dw2-fde.h unwind-dw2-fde.c
+
+# gmon build rule:
+gmon.o:	$(srcdir)/config/gmon-sol2.c
+	$(gcc_compile) -c $<
+
+# Assemble startup files.
+crt1.o: $(srcdir)/config/$(cpu_type)/sol2-c1.S
+	$(crt_compile) -c $<
+gcrt1.o: $(srcdir)/config/$(cpu_type)/sol2-c1.S
+	$(crt_compile) -c -DGCRT1 $<
+
+HOST_LIBGCC2_CFLAGS = -fPIC
diff --git a/libgcc/configure.ac b/libgcc/configure.ac
--- a/libgcc/configure.ac
+++ b/libgcc/configure.ac
@@ -4,6 +4,7 @@  sinclude(../config/enable.m4)
 sinclude(../config/tls.m4)
 sinclude(../config/acx.m4)
 sinclude(../config/no-executables.m4)
+sinclude(../config/lib-ld.m4)
 sinclude(../config/override.m4)
 sinclude(../config/dfp.m4)
 
@@ -166,6 +167,8 @@  AC_CACHE_CHECK([whether fixed-point is s
 fixed_point=$libgcc_cv_fixed_point
 AC_SUBST(fixed_point)
 
+AC_LIB_PROG_LD_GNU
+
 # Check for assembler CFI support.
 AC_CACHE_CHECK([whether assembler supports CFI directives], [libgcc_cv_cfi],
 	       [AC_COMPILE_IFELSE(
@@ -268,6 +271,7 @@  tmake_file="${tmake_file_}"
 AC_SUBST(tmake_file)
 
 # Substitute configuration variables
+AC_SUBST(cpu_type)
 AC_SUBST(extra_parts)
 AC_SUBST(asm_hidden_op)