[V5,23/30] dt-bindings: interrupt-controller: C-SKY SMP intc

- Dt-bindings doc about C-SKY Multi-processors interrupt controller.

Signed-off-by: Guo Ren <ren_guo@c-sky.com>
---
 .../bindings/interrupt-controller/csky,mpintc.txt  | 40 ++++++++++++++++++++++
 1 file changed, 40 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt

On Tue, Sep 25, 2018 at 07:39:26AM +0800, Guo Ren wrote:
>  - Dt-bindings doc about C-SKY Multi-processors interrupt controller.
> 
> Signed-off-by: Guo Ren <ren_guo@c-sky.com>
> ---
>  .../bindings/interrupt-controller/csky,mpintc.txt  | 40 ++++++++++++++++++++++
>  1 file changed, 40 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt
> 
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt b/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt
> new file mode 100644
> index 0000000..9cdad74
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt
> @@ -0,0 +1,40 @@
> +===========================================
> +C-SKY Multi-processors Interrupt Controller
> +===========================================
> +
> +C-SKY Multi-processors Interrupt Controller is designed for ck807/ck810/ck860
> +SMP soc, and it also could be used in non-SMP system.
> +
> +Interrupt number definition:
> +
> +  0-15  : software irq, and we use 15 as our IPI_IRQ.
> + 16-31  : private  irq, and we use 16 as the co-processor timer.
> + 31-1024: common irq for soc ip.
> +
> +=============================
> +intc node bindings definition
> +=============================
> +
> +	Description: Describes SMP interrupt controller
> +
> +	PROPERTIES
> +
> +	- compatible
> +		Usage: required
> +		Value type: <string>
> +		Definition: must be "csky,mpintc"

Only 1 version?

This is fine for a fallback, but you should have an SoC specific 
compatible too in case there are any SoC specific errata/quirks.

> +	- interrupt-cells

Should be: #interrupt-cells

> +		Usage: required
> +		Value type: <u32>
> +		Definition: must be <1>
> +	- interrupt-controller:
> +		Usage: required
> +
> +Examples:
> +---------
> +
> +	intc: interrupt-controller {
> +		compatible = "csky,mpintc";
> +		#interrupt-cells = <1>;
> +		interrupt-controller;
> +	};
> -- 
> 2.7.4
>

On Thu, Sep 27, 2018 at 11:50:44AM -0500, Rob Herring wrote:
> On Tue, Sep 25, 2018 at 07:39:26AM +0800, Guo Ren wrote:
> >  - Dt-bindings doc about C-SKY Multi-processors interrupt controller.
> > 
> > Signed-off-by: Guo Ren <ren_guo@c-sky.com>
> > ---
> >  .../bindings/interrupt-controller/csky,mpintc.txt  | 40 ++++++++++++++++++++++
> >  1 file changed, 40 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt b/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt
> > new file mode 100644
> > index 0000000..9cdad74
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt
> > @@ -0,0 +1,40 @@
> > +===========================================
> > +C-SKY Multi-processors Interrupt Controller
> > +===========================================
> > +
> > +C-SKY Multi-processors Interrupt Controller is designed for ck807/ck810/ck860
> > +SMP soc, and it also could be used in non-SMP system.
> > +
> > +Interrupt number definition:
> > +
> > +  0-15  : software irq, and we use 15 as our IPI_IRQ.
> > + 16-31  : private  irq, and we use 16 as the co-processor timer.
> > + 31-1024: common irq for soc ip.
> > +
> > +=============================
> > +intc node bindings definition
> > +=============================
> > +
> > +	Description: Describes SMP interrupt controller
> > +
> > +	PROPERTIES
> > +
> > +	- compatible
> > +		Usage: required
> > +		Value type: <string>
> > +		Definition: must be "csky,mpintc"
> 
> Only 1 version?
Currently, one version. Only one csky,mpintc.

> 
> This is fine for a fallback, but you should have an SoC specific 
> compatible too in case there are any SoC specific errata/quirks.
No SoC specific in fact currently. If necessary we could add it in future.

> 
> > +	- interrupt-cells
> 
> Should be: #interrupt-cells
Yes, I'll fix it.