deleted file mode 100644
@@ -1,9 +0,0 @@
-su01 export TCbin=$LTPROOT/testcases/bin;su01
-#cron01 cron01
-cron02 cron02
-cron_deny01 cron_deny01
-cron_allow01 cron_allow01
-cron_dirs_checks01 cron_dirs_checks01
-at_deny01 at_deny01
-at_allow01 at_allow01
-acl_test01 acl_test01
@@ -5,7 +5,6 @@ ldd01 ldd01
nm01 nm01
file01 file01.sh
tar01 tar_tests.sh
-cron cron_tests.sh
logrotate export TCdat=$LTPROOT/testcases/bin; logrotate_tests.sh
cpio01 cpio_tests.sh
unzip01 unzip01.sh
@@ -17,7 +17,6 @@ filecaps
cap_bounds
fcntl-locktests
connectors
-admin_tools
timers
power_management_tests
numa
@@ -1,5 +1,4 @@
/ldd/datafiles/lddfile.out
/ldd/datafiles/*.obj.so
-/cron/cron_dirs_check
/eject/eject_check_tray
/insmod/ltp_insmod01.ko
deleted file mode 100644
@@ -1,4 +0,0 @@
-cron01
- Test that crontab <filename> installs the cron-job-file and cron will
- schedule the job correctly.
-
deleted file mode 100644
@@ -1,29 +0,0 @@
-#
-# commands/cron testcases Makefile.
-#
-# Copyright (C) 2009, Cisco Systems Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Ngie Cooper, July 2009
-#
-
-top_srcdir ?= ../../..
-
-include $(top_srcdir)/include/mk/env_pre.mk
-
-INSTALL_TARGETS := cron0[23] cron_illegal_cron_lines cron_allow01 cron_deny01 cron_dirs_checks01 *.sh
-
-include $(top_srcdir)/include/mk/generic_leaf_target.mk
deleted file mode 100644
@@ -1,25 +0,0 @@
-This directory contains two scripts and one data file to test cron. Both
-shouldn't be run as root but they warn for themselves. If a username is
-given as parameter they run as this user.
-
-Both scripts save the current crontab and restore it after finishing.
-
-* Positive tests
-
- cron_pos_tests.sh [username]
-
- - add new job
- - check correct execution of job
- - delete job
-
-* Negative tests
-
- cron_neg_tests.sh [username]
-
- - try to edit the crontab of root
- - try to set illegal or nondefined execution times
- Here the script uses file illegal_cron_lines which contains two
- fields per line: the cron line to be tested (without script name),
- and the description of this test. The description is written to
- stdout during execution of the test.
- - try to do things you aren't allowed as non-root (cron runs as root)
deleted file mode 100755
@@ -1,80 +0,0 @@
-#!/bin/sh
-#*********************************************************************
-# Copyright (c) International Business Machines Corp., 2000
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-# the GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
-#
-# FILE : cron02
-#
-# PURPOSE: Test a postive cron job
-# - add new job
-# - check correct execution of job
-# - delete job
-#
-# HISTORY:
-# SUSE
-#
-
-TEST_USER="c01_user"
-TEST_USER_GROUP="users"
-TEST_USER_HOMEDIR="/home/$TEST_USER"
-
-#-----------------------------------------------------------------------
-# FUNCTION: do_setup
-#-----------------------------------------------------------------------
-
-do_setup(){
- #erase any data from potential defunt cron test
- rm -rf /tmp/crontest > /dev/null 2>&1
-
- #erase user if he may exist , so we can have a clean env
- rm -rf /home/$TEST_USER
- userdel $TEST_USER
- sleep 1
-
- useradd -m -g $TEST_USER_GROUP $TEST_USER
- if [ $? != 0 ]
- then {
- echo "Could not add test user $TEST_USER to system $RHOST."
- exit 1
- }
- fi
-
- if [ -n "$CROND_DAEMON" ]; then
- restart_daemon $CROND_DAEMON
- else
- tst_brkm TBROK "Couldn't find crond or cron"
- fi
-}
-
-#-----------------------------------------------------------------------
-# FUNCTION: do_cleanup
-#-----------------------------------------------------------------------
-
-do_cleanup(){
- rm -rf /home/$TEST_USER
- userdel $TEST_USER
-}
-
-#-----------------------------------------------------------------------
-# FUNCTION: MAIN
-#-----------------------------------------------------------------------
-. cmdlib.sh
-
-do_setup
-cron_pos_tests.sh $TEST_USER
-EXIT_CODE=$?
-do_cleanup
-exit $EXIT_CODE
deleted file mode 100755
@@ -1,83 +0,0 @@
-#!/bin/sh
-#*********************************************************************
-# Copyright (c) International Business Machines Corp., 2000
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-# the GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
-#
-# FILE : cron
-#
-# PURPOSE: Test a bad (negative) cron job
-# - try to edit the crontab of root
-# - try to set illegal or nondefined execution times
-# Here the script uses file illegal_cron_lines which contains two
-# fields per line: the cron line to be tested (without script name),
-# and the description of this test. The description is written to
-# stdout during execution of the test.
-# - try to do things you aren't allowed as non-root (cron runs as root)
-
-#
-# HISTORY:
-# SUSE
-#
-
-
-TEST_USER="c02_user"
-TEST_USER_GROUP="users"
-TEST_USER_HOMEDIR="/home/$TEST_USER"
-
-#-----------------------------------------------------------------------
-# FUNCTION: do_setup
-#-----------------------------------------------------------------------
-
-do_setup(){
-
- #erase user if he may exist , so we can have a clean env
- rm -rf /home/$TEST_USER
- userdel $TEST_USER
- sleep 1
-
- useradd -m -g $TEST_USER_GROUP $TEST_USER
- if [ $? != 0 ]
- then {
- echo "Could not add test user $TEST_USER to system $RHOST."
- exit 1
- }
- fi
- # restart cron daemon
- # Red Hat uses crond, SuSE/Other uses cron.
- if [ -f /etc/init.d/crond ]; then
- /etc/init.d/crond restart
- else
- /etc/init.d/cron restart
- fi
-}
-
-#-----------------------------------------------------------------------
-# FUNCTION: do_cleanup
-#-----------------------------------------------------------------------
-
-do_cleanup(){
- rm -rf /home/$TEST_USER
- userdel $TEST_USER
-}
-
-#-----------------------------------------------------------------------
-# FUNCTION: MAIN
-#-----------------------------------------------------------------------
-do_setup
-cron_neg_tests.sh $TEST_USER
-EXIT_CODE=$?
-do_cleanup
-exit $EXIT_CODE
deleted file mode 100755
@@ -1,202 +0,0 @@
-#!/bin/bash
-#
-# Copyright (c) International Business Machines Corp., 2003
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-# the GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
-#
-# FILE: /var/spool/cron/allow
-#
-# PURPOSE: Test that /var/spool/cron/allow , only allows those in the file to run cron jobs.
-#
-# HISTORY:
-# 04/03 Jerone Young (jyoung5@us.ibm.com)
-#
-
-echo "This script contains bashism that needs to be fixed!"
-
-iam=`whoami`
-
-tvar=${MACHTYPE%-*}
-tvar=${tvar#*-}
-
-if [ "$tvar" = "redhat" -o "$tvar" = "redhat-linux" ]
-then
-CRON_ALLOW="/etc/cron.allow"
-else
-CRON_ALLOW="/var/spool/cron/allow"
-fi
-
-TEST_USER1="ca_user1"
-TEST_USER1_HOME="/home/$TEST_USER1"
-TEST_USER2="ca_user2"
-TEST_USER2_HOME="/home/$TEST_USER2"
-
-#-----------------------------------------------------------------------
-# FUNCTION: do_setup
-#-----------------------------------------------------------------------
-
-do_setup() {
- #move any files that may get in the way
- rm /tmp/cron_allow_test > /dev/null 2>&1
- rm /tmp/cron_allow_test1 > /dev/null 2>&1
- mv $CRON_ALLOW $CRON_ALLOW.old > /dev/null 2>&1
-
- #remove users for clean enviroment
- su $TEST_USER1 -c "crontab -r"
- su $TEST_USER2 -c "crontab -r"
- rm -rf /home/$TEST_USER1
- rm -rf /home/$TEST_USER2
- userdel $TEST_USER1
- userdel $TEST_USER2
- sleep 1
-
-#create 1st user
- useradd -m -g users $TEST_USER1
- if [ $? != 0 ]
- then {
- echo "Could not add test user $TEST_USER1 to system."
- exit 1
- }
- fi
-
-#create 2nd user
- useradd -m -g users $TEST_USER2
- if [ $? != 0 ]
- then {
- echo "Could not add test user $TEST_USER2 to system."
- exit 1
- }
- fi
-}
-
-#-----------------------------------------------------------------------
-# FUNCTION: do_cleanup
-#-----------------------------------------------------------------------
-do_cleanup(){
- su $TEST_USER1 -c "crontab -r"
- su $TEST_USER2 -c "crontab -r"
- rm -rf /home/$TEST_USER1
- rm -rf /home/$TEST_USER2
- userdel $TEST_USER1
- userdel $TEST_USER2
- rm $CRON_ALLOW
- mv $CRON_ALLOW.old $CRON_ALLOW > /dev/null 2>&1
- rm /tmp/cron_allow_test >/dev/null 2>&1
-}
-
-#-----------------------------------------------------------------------
-# FUNCTION: run_test
-#-----------------------------------------------------------------------
-run_test() {
-
-if [ $iam = $TEST_USER1 ]
-then
- echo "TEST: $CRON_ALLOW should only allow those in the file to
-run cron jobs."
-
- echo "(1) TEST THAT PERSON IN $CRON_ALLOW IS ABLE TO RUN JOB."
-
- echo "backup crontab...."
- crontab -l | grep '^[^#]' > /tmp/crontab-cronallow-save-$iam
-
- crontab - << EOF
- `date '+%M' | awk '{ORS=""; print ($1+2)%60 " * * * * "}'` echo "TEST JOB RAN" >> /tmp/cron_allow_test 2>&1
-EOF
- if [ $? != 0 ]; then
- echo Error while adding crontab for user $TEST_USER1
- exit 1
- fi
-
- echo "sleeping for 130 seconds...."
- sleep 130
-
- EXIT_CODE=1
- test -e /tmp/cron_allow_test && EXIT_CODE=0
-
- if [ $EXIT_CODE = 1 ]; then
- echo "Cron did not allow user to execute job , TEST FAILED"
- else
- echo "Cron allowed user to execute test job, TEST PASSED"
- fi
-
- echo "restore old crontab..."
- crontab /tmp/crontab-cronallow-save-$iam
- rm -f /tmp/crontab-cronallow-save-$iam
-
-
- rm -f /tmp/cron_allow_test
-
- exit $EXIT_CODE
-fi
-
-if [ $iam = $TEST_USER2 ]
-then
- echo "(2) TEST THAT PERSON NOT IN $CRON_ALLOW IS NOT ABLE TO RUN JOB."
-
- echo "backup crontab...."
- crontab -l | grep '^[^#]' > /tmp/crontab-cronallow-save-$iam
-
- crontab - << EOF
- `date '+%M' | awk '{ORS=""; print ($1+2)%60 " * * * * "}'` echo "TEST JOB RAN" >> /tmp/cron_allow_test1 2>&1
-EOF
- if [ $? != 0 ]; then
- echo Error while adding crontab for user $TEST_USER2
- fi
-
- echo "sleeping for 130 seconds...."
- sleep 130
-
- EXIT_CODE=0
- test -e /tmp/cron_allow_test1 && EXIT_CODE=1
-
- if [ $EXIT_CODE = 0 ]; then
- echo "Cron did not allow user to execute job , TEST PASSED"
- else
- echo "Cron allowed user to execute test job, TEST FAILED"
- fi
-
- echo "restore old crontab..."
- crontab /tmp/crontab-cronallow-save-$iam
- rm -f /tmp/crontab-cronallow-save-$iam
-
- rm -f /tmp/cron_allow_test1
-
- exit $EXIT_CODE
-fi
-
-}
-
-#-----------------------------------------------------------------------
-# FUNCTION: main
-#-----------------------------------------------------------------------
-if [ $iam = "root" ]
-then
- do_setup
- echo $TEST_USER1 > $CRON_ALLOW
- EXIT_CODE=0
- su $TEST_USER1 -c "$0"
- if [ $? != 0 ]
- then
- EXIT_CODE=1
- fi
- su $TEST_USER2 -c "$0"
- if [ $? != 0 ]
- then EXIT_CODE=1
- fi
- do_cleanup
- exit $EXIT_CODE
-else
- run_test
-fi
deleted file mode 100755
@@ -1,192 +0,0 @@
-#!/bin/bash
-#
-# Copyright (c) International Business Machines Corp., 2003
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-# the GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
-#
-# FILE: /var/spool/cron/allow
-#
-# PURPOSE: Test that /var/spool/cron/deny , does not allow those in the file to run cron jobs.
-#
-# HISTORY:
-# 04/03 Jerone Young (jyoung5@us.ibm.com)
-#
-
-echo "This script contains bashism that needs to be fixed!"
-
-iam=`whoami`
-
-tvar=${MACHTYPE%-*}
-tvar=${tvar#*-}
-
-if [ "$tvar" = "redhat" -o "$tvar" = "redhat-linux" ]
-then
-CRON_DENY="/etc/cron.deny"
-CRON_ALLOW="/etc/cron.allow"
-else
-CRON_DENY="/var/spool/cron/deny"
-CRON_ALLOW="/var/spool/cron/allow"
-fi
-
-TEST_USER1="cd_user1"
-TEST_USER1_HOME="/home/$TEST_USER1"
-TEST_USER2="cd_user2"
-TEST_USER2_HOME="/home/$TEST_USER2"
-
-#-----------------------------------------------------------------------
-# FUNCTION: do_setup
-#-----------------------------------------------------------------------
-
-do_setup() {
- #move any files that may get in the way
- rm /tmp/cron_deny_test > /dev/null 2>&1
- rm /tmp/cron_deny_test1 > /dev/null 2>&1
-
- mv $CRON_DENY $CRON_DENY.old > /dev/null 2>&1
- mv $CRON_ALLOW $CRON_ALLOW.old > /dev/null 2>&1
-
- #remove users for clean enviroment
- su $TEST_USER1 -c "crontab -r"
- su $TEST_USER2 -c "crontab -r"
- rm -rf /home/$TEST_USER1
- rm -rf /home/$TEST_USER2
- userdel $TEST_USER1
- userdel $TEST_USER2
- sleep 1
-
-#create 1st user
- useradd -m -g users $TEST_USER1
- if [ $? != 0 ]
- then {
- echo "Could not add test user $TEST_USER1 to system."
- exit 1
- }
- fi
-
-#create 2nd user
- useradd -m -g users $TEST_USER2
- if [ $? != 0 ]
- then {
- echo "Could not add test user $TEST_USER2 to system."
- exit 1
- }
- fi
-}
-
-#-----------------------------------------------------------------------
-# FUNCTION: do_cleanup
-#-----------------------------------------------------------------------
-do_cleanup(){
- su $TEST_USER1 -c "crontab -r"
- su $TEST_USER2 -c "crontab -r"
- rm -rf /home/$TEST_USER1
- rm -rf /home/$TEST_USER2
- userdel $TEST_USER1
- userdel $TEST_USER2
- rm $CRON_DENY
- mv $CRON_DENY.old $CRON_DENY > /dev/null 2>&1
- mv $CRON_ALLOW.old $CRON_ALLOW > /dev/null 2>&1
- rm /tmp/cron_allow_test >/dev/null 2>&1
-}
-
-#-----------------------------------------------------------------------
-# FUNCTION: run_test
-#-----------------------------------------------------------------------
-run_test() {
-
-if [ $iam = $TEST_USER1 ]
-then
- echo "TEST: $CRON_DENY should allow only allow those who are not in the file to
-run cron jobs."
-
- echo "(1) TEST THAT PERSON NOT IN $CRON_DENY IS ABLE TO RUN JOB."
-
- crontab - << EOF
- `date '+%M' | awk '{ORS=""; print ($1+2)%60" * * * * "}'` echo "TEST JOB RAN" >> /tmp/cron_deny_test 2>&1
-EOF
- if [ $? != 0 ]; then
- echo Error while adding crontab for user $TEST_USER1
- exit 1
- fi
-
- echo "sleeping for 130 seconds...."
- sleep 130
-
- EXIT_CODE=1
- test -e /tmp/cron_deny_test && EXIT_CODE=0
-
- if [ $EXIT_CODE = 1 ]; then
- echo "Cron did not allow user to execute job , TEST FAILED"
- else
- echo "Cron allowed user to execute test job, TEST PASSED"
- fi
-
- rm -f /tmp/cron_deny_test
-
- exit $EXIT_CODE
-fi
-
-if [ $iam = $TEST_USER2 ]
-then
- echo "(2) TEST THAT PERSON IN $CRON_DENY IS NOT ABLE TO RUN JOB."
-
- crontab - << EOF
- `date '+%M' | awk '{ORS=""; print ($1+2)%60 " * * * * "}'` echo "TEST JOB RAN" >> /tmp/cron_deny_test 2>&1
-EOF
- if [ $? != 0 ]; then
- echo Error while adding crontab for user $TEST_USER2
- fi
-
- echo "sleeping for 130 seconds...."
- sleep 130
-
- EXIT_CODE=0
- test -e /tmp/cron_deny_test1 && EXIT_CODE=1
-
- if [ $EXIT_CODE = 0 ]; then
- echo "Cron did not allow user to execute job , TEST PASSED"
- else
- echo "Cron allowed user to execute test job, TEST FAILED"
- fi
-
- rm -f /tmp/cron_deny_test1
-
- exit $EXIT_CODE
-fi
-
-}
-
-#-----------------------------------------------------------------------
-# FUNCTION: main
-#-----------------------------------------------------------------------
-if [ $iam = "root" ]
-then
- do_setup
- echo $TEST_USER2 > $CRON_DENY
- EXIT_CODE=0
- su $TEST_USER1 -c "$0"
- if [ $? != 0 ]
- then
- EXIT_CODE=1
- fi
- su $TEST_USER2 -c "$0"
- if [ $? != 0 ]
- then EXIT_CODE=1
- fi
- do_cleanup
- exit $EXIT_CODE
-else
- run_test
-fi
deleted file mode 100644
@@ -1,44 +0,0 @@
-#include <sys/types.h>
-#include <sys/param.h>
-#include <sys/stat.h>
-#include <stdio.h>
-#include <unistd.h>
-
-/* Check directory Access */
-int check_directory_access(char *directory)
-{
-
- struct stat statbuf;
-
- printf("Checking %s\n", directory);
-
- if (stat(directory, &statbuf) == -1) {
- printf("FAIL: %s. Could not obtain directory status\n",
- directory);
- return 1;
- }
-
- if (statbuf.st_uid != 0) {
- printf("FAIL: %s. Invalid owner\n", directory);
- return 1;
- }
-
- if ((statbuf.st_mode & S_IWGRP) || (statbuf.st_mode & S_IWOTH)) {
- printf("FAIL: %s. Invalid write access\n", directory);
- return 1;
- }
-
- printf("PASS: %s\n", directory);
- return 0;
-}
-
-int main(int argc, char *argv[])
-{
-
- if (argc != 2) {
- printf("Please enter target directory");
- return 1;
- }
-
- return check_directory_access(argv[1]);
-}
deleted file mode 100755
@@ -1,46 +0,0 @@
-#!/bin/sh
-#*********************************************************************
-# Copyright (c) International Business Machines Corp., 2000
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-# the GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
-#
-# FILE : cron
-#
-# PUROPOSE: Ensure that the following directories only have root write access
-# /etc/cron.d
-# /etc/cron.daily
-# /etc/cron.hourly
-# /etc/cron.monthly
-# /etc/cron.weekly
-# /var/spool/cron
-# HISTORY:
-# Jerone Young (jyoung5@us.ibm.com)
-#
-
-DIRS="/etc/cron.d /etc/cron.daily /etc/cron.hourly /etc/cron.monthly /etc/cron.weekly /var/spool/cron"
-
-EXIT_CODE=0
-for i in $DIRS
-do
- cron_dirs_check $i
- if [ $? != 0 ]
- then
- echo "$i FAILED TEST!!!!!"
- EXIT_CODE=1
- fi
-
-done
-
-exit $EXIT_CODE
deleted file mode 100644
@@ -1,39 +0,0 @@
-# Collection of illegal cron lines
-# Comment lines must habe its '#' as first character.
-# The cron conf line and its description is seperated by '|'.
-# cron job command 'true' is appended automatically
-
-# Illegal Minutes
-61 * * * * | Minute 61
--1 * * * * | Minute -1 (might be interpreted as range)
-0.5 * * * * | Minute 0.5
--1-10 * * * *| Minute Range -1-10
-0-61 * * * * | Minute Range 0-61
-
-# Illegal hours
-0 25 * * * | Hour 25
-0 -2 * * * | Hour -2
-0 3.5 * * *| Hour 3.5
-0 -4-10 * * *| Hour Range -4-10
-0 0-25 * * * | Hour Range 0-25
-
-# Illegal day of month
-0 0 32 * * | Day 32
-0 0 -1 * * | Day -1
-0 0 3.5 * *| Day 3.5
-0 0 -3-3 * *| Day Range -3-3
-0 0 0-32 * *| Day Range 0-32
-
-# Illegal month
-0 0 1 13 * | Month 13
-0 0 1 -1 * | Month -1
-0 0 1 2.5 * | Month 2.5
-0 0 1 -2-3 * | Month Range -2-3
-0 0 1 0-13 * | Month Range 0-13
-
-# Illegal day of week
-0 0 * * 8 | Day of Week 8
-0 0 * * -2 | Day of Week -2
-0 0 * * 2.5 | Day of Week 2.5
-0 0 * * -7-7 | Day of Week Range -7-7
-0 0 * * 0-8 | Day of Week Range 0-8
deleted file mode 100755
@@ -1,141 +0,0 @@
-#!/bin/bash
-########################################################
-#
-# CHANGE ACTIVITY
-#
-# 10/01/04 Kris Wilson RHEL4 only allows super user
-# to use crontab.
-# to use crontab.
-# 12/03/04 Marty Ridgeway Pull RHEl4 tests out from script
-########################################################
-
-iam=`whoami`
-
-if [ $iam = "root" ]; then
- if [ $# -lt 1 ] ; then
- echo Either do not run this script as root or start it like
- echo " $0 <user>"
- exit 1
- fi
-
- su $1 -c "$0 $*"
- exit $?
-fi
-
-#
-# 1. root einen cronjob unterjubeln
-#
-
-finalrc=0
-
-
-crontab -u root - << EOF
-0 * * * * true
-EOF
-
-rc=$?
-
-if [ $rc = "0" ]; then
- echo root has now an interesting cron job
- echo "crontab has a severe security breach (FAIL)"
- echo
- finalrc=1
-else
- echo "Editing a crontab of another user failed successfully (PASS)"
- echo
-fi
-
-
-#
-# 2. write some illegal crontabs
-#
-
-# Save crontab
-
-#crontab -l > /dev/null 2> /dev/null
-#if [ $? = "0" ]; then
-# echo Saving current crontab...
-# echo
-# crontab -l > /tmp/save-crontab-`whoami`
-# savedcrontab=1
-# crontab -r
-#fi
-
-#for line in `cat cron_illegal_cron_lines | grep '^[^#]' | sed -e 's/[ \t][ \t]*/_/g'` ; do
-# line=`echo $line | sed -e 's/_/ /g'`
- # echo Line: "$line"
-# cronconf=`echo "$line" | cut -f 1 -d '|'`
-# desc=`echo "$line" | cut -f 2 -d '|'`
-
-# echo "Test: $desc"
-# echo "$cronconf true" | crontab -
- # echo "$cronconf"
-# if [ $? = "0" ]; then
-# echo 'Test FAILED (or crontab returned wrong exit code)'
-# echo 'crontab -l:'
-# crontab -l
-# finalrc=1
-# fi
-# echo
-#done
-
-
-# Test whether cron uses setuid correctly
-
-echo
-echo setuid test
-echo
-
-tmpscript=cron_neg01_test
-rm -rf $tmpscript.out >/dev/null 2>&1
-
-
-cat > /tmp/$tmpscript << EOF
-touch /root/halloichwarhier
-sleep 1
-cat /root/halloichwarhier ; echo "res:$?"
-rm /root/halloichwarhier
-EOF
-
-chmod 755 /tmp/$tmpscript
-
-#
-cronline=`date '+%M' | awk '{print ($1+2)%60 " * * * * "}'`
-(echo "$cronline /tmp/$tmpscript >> /tmp/$tmpscript.out 2>> /tmp/$tmpscript.out" ; \
- echo "$cronline /tmp/$tmpscript >> /$tmpscript.out 2>> /$tmpscript.out") \
- | crontab -
-
-echo "sleeping 130 secs..."
-sleep 130
-
-echo
-echo "Results:"
-if [ "1" = `cat /tmp/$tmpscript.out | grep "res:0" | wc -l` ]; then
- echo "setuid test part 1 successfully failed (PASS)"
-else
- echo "cron executed scripts have root privileges! (FAIL)"
- finalrc=1
-fi
-
-CODE=0
-test -e /tmp/$tmpscript.out && CODE=1
-if [ $CODE = "1" ]; then
- echo "setuid test part 2 successfully failed (PASS)"
-else
- echo "cron writes script output with root privileges! (FAIL)"
- finalrc=1
-fi
-echo
-
-rm /tmp/$tmpscript* >/dev/null 2>&1
-crontab -r
-
-# Restore crontab
-
-if [ "$savedcrontab" = "1" ]; then
- echo "Restoring crontab..."
- cat /tmp/save-crontab-`whoami` | grep '^[^#]' | crontab -
- # rm -r /tmp/save-crontab-`whoami`
-fi
-
-exit $finalrc
deleted file mode 100755
@@ -1,118 +0,0 @@
-#!/bin/bash
-
-# Positive tests for cron, that means these tests have to pass
-
-iam=`whoami`
-
-tvar=${MACHTYPE%-*}
-tvar=${tvar#*-}
-
-if [ "$tvar" = "redhat" -o "$tvar" = "redhat-linux" ]
-then
- CRON_ALLOW="/etc/cron.allow"
-else
- CRON_ALLOW="/var/spool/cron/allow"
-fi
-
-
-if [ $iam = "root" ]; then
- if [ $# -lt 1 ] ; then
- echo Either do not run this script as root or start it like
- echo " $0 <user>"
- exit 1
- fi
-
- mv $CRON_ALLOW $CRON_ALLOW.old >/dev/null 2>&1
- su $1 -c "$0 $*"
- RC=$?
- mv $CRON_ALLOW.old $CRON_ALLOW >/dev/null 2>&1
- exit $RC
-fi
-
-function restorecrontab () {
- test -e /tmp/crontab-save-$iam && \
- crontab /tmp/crontab-save-$iam && \
- rm -f /tmp/crontab-save-$iam && \
- echo restored old crontab
-}
-
-echo Running as user $iam...
-
-# Save current users crontab
-
-test -e /tmp/crontab-save-$iam && rm -f /tmp/crontab-save-$iam
-
-if [ "0" -lt `crontab -l 2>/dev/null | wc -l` ]; then
-
- echo 'crontab of this user exists -> creating backup'
- crontab -l | grep '^[^#]' > /tmp/crontab-save-$iam
-fi
-
-
-# Do tests
-
-# 1. Add new job
-
-rm -rf /tmp/crontest >/dev/null 2>&1
-mkdir -p /tmp/crontest
-
-cat > /tmp/crontest/testjob_cron01 << EOF
-echo Testjob running
-date
-EOF
-
-chmod 755 /tmp/crontest/testjob_cron01
-
-crontab - << EOF
-`date '+%M' | awk '{ print ($1+2)%60 " * * * * "
-}'` /tmp/crontest/testjob_cron01 >> /tmp/crontest/output_cron01 2>&1
-EOF
-
-rc=$?
-
-if [ $rc = "1" ]; then
- echo Error while adding crontab for user $iam
- restorecrontab
- exit 1
-fi
-
-echo new job added successfully
-
-# 2. Wait for execution of job
-
-echo 'sleeping for 130 seconds...'
-sleep 130
-
-rc=1
-test -e /tmp/crontest/output_cron01 && rc=0
-
-if [ $rc = "1" ]; then
- echo Job has not been executed
- restorecrontab
- exit 1
-fi
-
-grep "Testjob running" /tmp/crontest/output_cron01
-rc=$?
-if [ $rc = "1" ]; then
- echo Job has not produced valid output
- restorecrontab
-fi
-
-echo 'job has been executed :-)'
-echo "testjob's output:"
-echo
-
-rm -rf /tmp/crontest
-
-# 3. Delete crontab
-
-crontab -r
-
-echo removed crontab
-
-# Restore old crontab file
-
-restorecrontab
-
-exit $rc
deleted file mode 100644
@@ -1,276 +0,0 @@
-#!/bin/sh
-
-# Copyright (c) International Business Machines Corp., 2001
-# Copyright (c) 2017 Petr Vorel <pvorel@suse.cz>
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it would be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-#
-# Author: Manoj Iyer <manjo@mail.utexas.edu>
-
-TST_CNT=3
-TST_TESTFUNC=do_test
-TST_NEEDS_TMPDIR=1
-TST_SETUP=setup
-TST_CLEANUP=cleanup
-. tst_test.sh
-
-. daemonlib.sh
-
-SYSLOG_STARTED=
-CROND_STARTED=
-LOGS=
-
-grep_logs()
-{
- local pattern="$1"
- local fail_msg="$2"
- local pass_msg="${3:-}"
- local n="${4:-10}"
-
- local lines=10
- local out=out.$$
- local err=err.$$
- local i ret
-
- for i in $(seq 1 $n); do
- if [ "$LOGS" ]; then
- tail -n $lines $LOGS | grep "$pattern" > $out 2> $err
- else
- journalctl -n $lines | grep "$pattern" > $out 2> $err
- fi
- ret=$?
- [ $ret -eq 0 ] && break
- sleep 1
- done
-
- if [ $ret -ne 0 ]; then
- tst_res TFAIL "$fail_msg: `cat $err`"
- else
- [ "$pass_msg" ] && tst_res TPASS "$pass_msg"
- fi
-}
-
-create_crontab()
-{
- local crontab=cronjob.cron
- local script=$1
- local out=out.$$
-
- tst_res TINFO "creating crontab: $script"
-
- cat > $crontab <<EOF
-* * * * * $script
-EOF
-
- tst_res TINFO "installing crontab file"
- crontab $crontab > $out 2>&1
- if [ $? -ne 0 ]; then
- tst_brk TBROK "crontab: error while installing crontab file: `cat $out`"
- return 1
- fi
- return 0
-}
-
-remove_crontab()
-{
- local out=out.$$
- tst_res TINFO "removing crontab file"
- crontab -r > $out 2>&1
- if [ $? -ne 0 ]; then
- tst_brk TBROK "crontab: error while removing crontab file `cat $out`"
- return 1
- fi
- return 0
-}
-
-create_hello_script()
-{
- local script=$1
-
- cat > $script <<EOF
-#!/bin/sh
-echo "Hello Hell"
-exit 0
-EOF
- chmod +x $script
-}
-
-install_cron_test()
-{
- local script=$PWD/cronprg.sh
- local cron_out=$PWD/tst1_cron.out
- local err=err.log
- local sleep_sec
- local ts_min1 ts_min2 fail
-
- tst_res TINFO "test install cron job"
-
- cat > $script <<EOF
-#! /bin/sh
-DATE=\`LC_ALL=C date\`
-echo "Hello Hell today is \$DATE" > $cron_out 2>&1
-exit 0
-EOF
- chmod +x $script
-
- create_crontab $script 2> $err
-
- if [ $? -ne 0 ]; then
- tst_brk TBROK "crontab: error while creating cron job: `cat $err`"
- else
- tst_res TINFO "cron job installed successfully"
- fi
-
- grep_logs 'crontab.*REPLACE' \
- "cron activity not recorded" \
- "cron activity logged"
-
- # Sleep 3s after next minute since the loop below sleeps for 62 seconds, we
- # should start this 5-iteration loop closely following the start of a
- # minute.
- sleep_sec=$((123-`date +%-S`))
- tst_res TINFO "sleep for ${sleep_sec}s"
- sleep $sleep_sec
-
- # $script executed by the cron job will record the date and time into file
- # $cron_out. Get the minute recorded by the program, sleep to allow the cron
- # job to update file after 1m, and check if the value is advanced by 1.
- for i in $(seq 1 5); do
- tst_res TINFO "loop: $i: start"
-
- if [ ! -f "$cron_out" ]; then
- tst_res TFAIL "loop $i: file $cron_out doesn't exist"
- fail=1
- break
- fi
-
- ts_min1=$(awk '{print $8}' $cron_out | awk -F: '{printf("%d", $2);}')
-
- # wait for the cron job to update output file
- sleep 62
-
- # Check the time recorded in output file, this should be 1 minute ahead of
- # what was recored earlier.
- ts_min2=$(awk '{print $8}' $cron_out | awk -F: '{printf("%d", $2);}')
-
- if [ "x${ts_min1}" = "x" ] || [ "x${ts_min2}" = "x" ]; then
- tst_res TFAIL "loop $i: failed to get time: ts_min1: $ts_min1, ts_min2: $ts_min2"
- fail=1
- break
- fi
-
- [ $ts_min1 -eq 59 ] && ts_min1=0 || ts_min1=$(( $ts_min1+1 ))
-
- if [ $ts_min2 -ne $ts_min1 ]; then
- tst_res TFAIL "loop $i: failed to update every minute: expected: $ts_min1, received: $ts_min2"
- fail=1
- break
- fi
- done
-
- if [ ! "$fail" ]; then
- grep_logs "CMD ($script)" \
- "failed to install cron job installed and execute it" \
- "cron job installed and executed" 1
- fi
-
- remove_crontab
-}
-
-remove_cron_job_test()
-{
- local script=$PWD/cronprg.sh
-
- tst_res TINFO "test remove cron job"
-
- create_hello_script $script
- create_crontab $script
-
- grep_logs 'crontab.*REPLACE' \
- "crontab activity not recorded"
-
- remove_crontab && grep_logs DELETE \
- "crontab activity not recorded" \
- "crontab removed the cron job" 1
-}
-
-list_cron_jobs_test()
-{
- local script=$PWD/cronprg.sh
- local out=cron.out
-
- tst_res TINFO "test list installed cron jobs"
-
- create_hello_script $script
- create_crontab $script
-
- tst_res TINFO "crontab: listing cron jobs"
- crontab -l | grep "$script" > $out 2>&1 || \
- tst_brk TBROK "crontab failed while listing installed cron jobs: `cat $out`"
-
- remove_crontab
-
- crontab -l > $out 2>&1
- if [ $? -ne 0 ]; then
- grep -q "no crontab for" $out
- if [ $? -ne 0 ]; then
- tst_res TFAIL "crontab failed removing cron job: `cat $out`"
- else
- tst_res TPASS "crontab did not list any cron jobs"
- fi
- else
- tst_res TFAIL "crontab failed removing cron job: `cat $out`"
- fi
-}
-
-setup()
-{
- if [ "$SYSLOG_DAEMON" ]; then
- status_daemon $SYSLOG_DAEMON
- if [ $? -ne 0 ]; then
- restart_daemon $SYSLOG_DAEMON
- SYSLOG_STARTED=1
- fi
- fi
-
- if [ "$CROND_DAEMON" ]; then
- status_daemon $CROND_DAEMON
- if [ $? -ne 0 ]; then
- restart_daemon $CROND_DAEMON
- CROND_STARTED=1
- fi
- fi
-
- for f in /var/log/syslog /var/log/messages /var/log/cron /var/log/cron.log; do
- [ -f "$f" ] && LOGS="$f $LOGS"
- done
-}
-
-cleanup()
-{
- [ "$SYSLOG_STARTED" = "1" ] && stop_daemon $SYSLOG_DAEMON
- [ "$CROND_STARTED" = "1" ] && stop_daemon $CROND_DAEMON
-}
-
-do_test()
-{
- case $1 in
- 1) install_cron_test;;
- 2) remove_cron_job_test;;
- 3) list_cron_jobs_test;;
- esac
-}
-
-tst_run
Removing them as they don't really fit into "kernel testing", it'd be better to have them in some "LTP userspace" project. + remove admin_tools runtest file which run them (as a part of EAL2 testsuite). Signed-off-by: Petr Vorel <pvorel@suse.cz> --- runtest/admin_tools | 9 - runtest/commands | 1 - scenario_groups/default | 1 - testcases/commands/.gitignore | 1 - testcases/commands/cron/00_Descriptions.txt | 4 - testcases/commands/cron/Makefile | 29 -- testcases/commands/cron/README.tests | 25 -- testcases/commands/cron/cron02 | 80 ----- testcases/commands/cron/cron03 | 83 ------ testcases/commands/cron/cron_allow01 | 202 ------------- testcases/commands/cron/cron_deny01 | 192 ------------ testcases/commands/cron/cron_dirs_check.c | 44 --- testcases/commands/cron/cron_dirs_checks01 | 46 --- .../commands/cron/cron_illegal_cron_lines | 39 --- testcases/commands/cron/cron_neg_tests.sh | 141 --------- testcases/commands/cron/cron_pos_tests.sh | 118 -------- testcases/commands/cron/cron_tests.sh | 276 ------------------ 17 files changed, 1291 deletions(-) delete mode 100644 runtest/admin_tools delete mode 100644 testcases/commands/cron/00_Descriptions.txt delete mode 100644 testcases/commands/cron/Makefile delete mode 100644 testcases/commands/cron/README.tests delete mode 100755 testcases/commands/cron/cron02 delete mode 100755 testcases/commands/cron/cron03 delete mode 100755 testcases/commands/cron/cron_allow01 delete mode 100755 testcases/commands/cron/cron_deny01 delete mode 100644 testcases/commands/cron/cron_dirs_check.c delete mode 100755 testcases/commands/cron/cron_dirs_checks01 delete mode 100644 testcases/commands/cron/cron_illegal_cron_lines delete mode 100755 testcases/commands/cron/cron_neg_tests.sh delete mode 100755 testcases/commands/cron/cron_pos_tests.sh delete mode 100644 testcases/commands/cron/cron_tests.sh