[U-Boot,v2,12/14] DB410c: Enable fastboot support

Message ID	20180921103555.16240-13-ramon.fried@gmail.com
State	Accepted
Delegated to:	Tom Rini
Headers	show Return-Path: <u-boot-bounces@lists.denx.de> From: Ramon Fried <ramon.fried@gmail.com> To: u-boot@lists.denx.de Date: Fri, 21 Sep 2018 13:35:54 +0300 Message-Id: <20180921103555.16240-13-ramon.fried@gmail.com> In-Reply-To: <20180921103555.16240-1-ramon.fried@gmail.com> References: <20180921103555.16240-1-ramon.fried@gmail.com> Subject: [U-Boot] [PATCH v2 12/14] DB410c: Enable fastboot support Precedence: list MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: base64 Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" <u-boot-bounces@lists.denx.de>
Series	Introduce fastboot support for dragonboard410c \| expand [U-Boot,v2,00/14] Introduce fastboot support for dragonboard410c [U-Boot,v2,01/14] ehci: Replace board_prepare_usb with board_usb_init [U-Boot,v2,02/14] ehci: msm: Add missing platdata [U-Boot,v2,03/14] dts: db410c: add alias for USB [U-Boot,v2,04/14] db410c: serial# env using msm board serial [U-Boot,v2,05/14] phy: db410c: Add MSM USB PHY driver [U-Boot,v2,06/14] dts: db410c: Add bindings for MSM USB phy [U-Boot,v2,07/14] configs: db410c: Enable USB PHY [U-Boot,v2,08/14] ehci: msm: switch to generic PHY uclass [U-Boot,v2,09/14] ehci: msm: use init_type in probe [U-Boot,v2,10/14] usb:ci_udc: Introduce init_after_reset phy function [U-Boot,v2,11/14] usb: ehci-msm: Add init_after_reset for CI_UDC [U-Boot,v2,12/14] DB410c: Enable fastboot support [U-Boot,v2,13/14] db410c: automatically launch fastboot [U-Boot,v2,14/14] usb:ci_udc: don't overwrite configuration on pullup

Message ID

20180921103555.16240-13-ramon.fried@gmail.com

State

Accepted

Delegated to:

Tom Rini

Headers

From: Ramon Fried <ramon.fried@gmail.com>
To: u-boot@lists.denx.de
Date: Fri, 21 Sep 2018 13:35:54 +0300
Message-Id: <20180921103555.16240-13-ramon.fried@gmail.com>
In-Reply-To: <20180921103555.16240-1-ramon.fried@gmail.com>
References: <20180921103555.16240-1-ramon.fried@gmail.com>
Subject: [U-Boot] [PATCH v2 12/14] DB410c: Enable fastboot support
Precedence: list
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: base64
Errors-To: u-boot-bounces@lists.denx.de
Sender: "U-Boot" <u-boot-bounces@lists.denx.de>

Series

Introduce fastboot support for dragonboard410c | expand

Comments

Tom Rini Sept. 30, 2018, 7:26 p.m. UTC | #1

On Fri, Sep 21, 2018 at 01:35:54PM +0300, Ramon Fried wrote:

> Signed-off-by: Ramon Fried <ramon.fried@gmail.com>

Applied to u-boot/master, thanks!

diff --git a/configs/dragonboard410c_defconfig b/configs/dragonboard410c_defconfig
index 0d9008deb7..a55abaf8df 100644
--- a/configs/dragonboard410c_defconfig
+++ b/configs/dragonboard410c_defconfig
@@ -4,6 +4,7 @@  CONFIG_SYS_TEXT_BASE=0x80080000
 CONFIG_IDENT_STRING="\nQualcomm-DragonBoard 410C"
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_NR_DRAM_BANKS=1
+# CONFIG_ANDROID_BOOT_IMAGE is not set
 CONFIG_FIT=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_MISC_INIT_R=y
@@ -22,6 +23,10 @@  CONFIG_CMD_TIMER=y
 CONFIG_DEFAULT_DEVICE_TREE="dragonboard410c"
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_CLK=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_FASTBOOT_BUF_ADDR=0x91000000
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=0
 CONFIG_MSM_GPIO=y
 CONFIG_PM8916_GPIO=y
 CONFIG_LED=y
@@ -43,6 +48,11 @@  CONFIG_USB_EHCI_MSM=y
 CONFIG_USB_ULPI_VIEWPORT=y
 CONFIG_USB_ULPI=y
 CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_VENDOR_NUM=0x18d1
+CONFIG_USB_GADGET_PRODUCT_NUM=0xd00d
+CONFIG_CI_UDC=y
+CONFIG_USB_GADGET_DUALSPEED=n
 CONFIG_USB_HOST_ETHER=y
 CONFIG_USB_ETHER_ASIX=y
 CONFIG_USB_ETHER_ASIX88179=y

[U-Boot,v2,12/14] DB410c: Enable fastboot support

Commit Message

Comments

Patch