diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index c4bdd27..f4ef230 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -546,6 +546,13 @@ config LEON_PCI
 	depends on PCI && SPARC_LEON
 	default y
 
+config GRPCI2
+	bool "GRPCI2 Host Bridge Support"
+	depends on LEON_PCI
+	default y
+	help
+	  Say Y here to include the GRPCI2 Host Bridge Driver.
+
 source "drivers/pci/Kconfig"
 
 source "drivers/pcmcia/Kconfig"
diff --git a/arch/sparc/include/asm/leon.h b/arch/sparc/include/asm/leon.h
index 6bdaf1e..a4e457f 100644
--- a/arch/sparc/include/asm/leon.h
+++ b/arch/sparc/include/asm/leon.h
@@ -318,6 +318,9 @@ struct device_node;
 extern unsigned int leon_build_device_irq(unsigned int real_irq,
 					   irq_flow_handler_t flow_handler,
 					   const char *name, int do_ack);
+extern void leon_update_virq_handling(unsigned int virq,
+			      irq_flow_handler_t flow_handler,
+			      const char *name, int do_ack);
 extern void leon_clear_clock_irq(void);
 extern void leon_load_profile_irq(int cpu, unsigned int limit);
 extern void leon_init_timers(irq_handler_t counter_fn);
diff --git a/arch/sparc/kernel/Makefile b/arch/sparc/kernel/Makefile
index b02d2e3..b90b4a1 100644
--- a/arch/sparc/kernel/Makefile
+++ b/arch/sparc/kernel/Makefile
@@ -75,6 +75,7 @@ obj-y                     += dma.o
 
 obj-$(CONFIG_PCIC_PCI)    += pcic.o
 obj-$(CONFIG_LEON_PCI)    += leon_pci.o
+obj-$(CONFIG_GRPCI2)      += leon_pci_grpci2.o
 
 obj-$(CONFIG_SMP)         += trampoline_$(BITS).o smp_$(BITS).o
 obj-$(CONFIG_SPARC32_SMP) += sun4m_smp.o sun4d_smp.o leon_smp.o
diff --git a/arch/sparc/kernel/leon_kernel.c b/arch/sparc/kernel/leon_kernel.c
index 2f538ac..c23d61e 100644
--- a/arch/sparc/kernel/leon_kernel.c
+++ b/arch/sparc/kernel/leon_kernel.c
@@ -236,6 +236,21 @@ static unsigned int _leon_build_device_irq(struct platform_device *op,
 	return leon_build_device_irq(real_irq, handle_simple_irq, "edge", 0);
 }
 
+void leon_update_virq_handling(unsigned int virq,
+			      irq_flow_handler_t flow_handler,
+			      const char *name, int do_ack)
+{
+	unsigned long mask = (unsigned long)irq_get_chip_data(virq);
+
+	mask &= ~LEON_DO_ACK_HW;
+	if (do_ack)
+		mask |= LEON_DO_ACK_HW;
+
+	irq_set_chip_and_handler_name(virq, &leon_irq,
+				      flow_handler, name);
+	irq_set_chip_data(virq, (void *)mask);
+}
+
 void __init leon_init_timers(irq_handler_t counter_fn)
 {
 	int irq, eirq;
diff --git a/arch/sparc/kernel/leon_pci_grpci2.c b/arch/sparc/kernel/leon_pci_grpci2.c
new file mode 100644
index 0000000..44dc093
--- /dev/null
+++ b/arch/sparc/kernel/leon_pci_grpci2.c
@@ -0,0 +1,897 @@
+/*
+ * leon_pci_grpci2.c: GRPCI2 Host PCI driver
+ *
+ * Copyright (C) 2011 Aeroflex Gaisler AB, Daniel Hellstrom
+ *
+ */
+
+#include <linux/of_device.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <asm/io.h>
+#include <asm/leon.h>
+#include <asm/vaddrs.h>
+#include <asm/sections.h>
+#include <asm/leon_pci.h>
+
+#include "irq.h"
+
+struct grpci2_barcfg {
+	unsigned long pciadr;	/* PCI Space Address */
+	unsigned long ahbadr;	/* PCI Base address mapped to this AHB addr */
+};
+
+/* Device Node Configuration options:
+ *  - barcfgs    : Custom Configuration of Host's 6 target BARs
+ *  - irq_mask   : Limit which PCI interrupts are enabled
+ *  - do_reset   : Force PCI Reset on startup
+ *
+ * barcfgs
+ * =======
+ *
+ * Optional custom Target BAR configuration (see struct grpci2_barcfg). All
+ * addresses are physical. Array always contains 6 elements (len=2*4*6 bytes)
+ *
+ * -1 means not configured (let host driver do default setup).
+ *
+ * [i*2+0] = PCI Address of BAR[i] on target interface
+ * [i*2+1] = Accessing PCI address of BAR[i] result in this AMBA address
+ *
+ *
+ * irq_mask
+ * ========
+ *
+ * Limit which PCI interrupts are enabled. 0=Disable, 1=Enable. By default
+ * all are enabled. Use this when PCI interrupt pins are floating on PCB.
+ * int, len=4.
+ *  bit0 = PCI INTA#
+ *  bit1 = PCI INTB#
+ *  bit2 = PCI INTC#
+ *  bit3 = PCI INTD#
+ *
+ *
+ * reset
+ * =====
+ *
+ * Force PCI reset on startup. int, len=4
+ */
+
+/* Enable Debugging Configuration Space Access */
+#undef GRPCI2_DEBUG_CFGACCESS
+
+/*
+ * GRPCI2 APB Register MAP
+ */
+struct grpci2_regs {
+	unsigned int ctrl;		/* 0x00 Control */
+	unsigned int sts_cap;		/* 0x04 Status / Capabilities */
+	int res1;			/* 0x08 */
+	unsigned int io_map;		/* 0x0C I/O Map address */
+	unsigned int dma_ctrl;		/* 0x10 DMA */
+	unsigned int dma_bdbase;	/* 0x14 DMA */
+	int res2[2];			/* 0x18 */
+	unsigned int bars[6];		/* 0x20 read-only PCI BARs */
+	int res3[2];			/* 0x38 */
+	unsigned int ahbmst_map[16];	/* 0x40 AHB->PCI Map per AHB Master */
+
+	/* PCI Trace Buffer Registers (OPTIONAL) */
+	unsigned int t_ctrl;		/* 0x80 */
+	unsigned int t_cnt;		/* 0x84 */
+	unsigned int t_adpat;		/* 0x88 */
+	unsigned int t_admask;		/* 0x8C */
+	unsigned int t_sigpat;		/* 0x90 */
+	unsigned int t_sigmask;		/* 0x94 */
+	unsigned int t_adstate;		/* 0x98 */
+	unsigned int t_sigstate;	/* 0x9C */
+};
+
+#define REGLOAD(a)	(be32_to_cpu(__raw_readl(&(a))))
+#define REGSTORE(a, v)	(__raw_writel(cpu_to_be32(v), &(a)))
+
+#define CTRL_BUS_BIT 16
+
+#define CTRL_RESET (1<<31)
+#define CTRL_SI (1<<27)
+#define CTRL_PE (1<<26)
+#define CTRL_EI (1<<25)
+#define CTRL_ER (1<<24)
+#define CTRL_BUS (0xff<<CTRL_BUS_BIT)
+#define CTRL_HOSTINT 0xf
+
+#define STS_HOST_BIT	31
+#define STS_MST_BIT	30
+#define STS_TAR_BIT	29
+#define STS_DMA_BIT	28
+#define STS_DI_BIT	27
+#define STS_HI_BIT	26
+#define STS_IRQMODE_BIT	24
+#define STS_TRACE_BIT	23
+#define STS_CFGERRVALID_BIT 20
+#define STS_CFGERR_BIT	19
+#define STS_INTTYPE_BIT	12
+#define STS_INTSTS_BIT	8
+#define STS_FDEPTH_BIT	2
+#define STS_FNUM_BIT	0
+
+#define STS_HOST	(1<<STS_HOST_BIT)
+#define STS_MST		(1<<STS_MST_BIT)
+#define STS_TAR		(1<<STS_TAR_BIT)
+#define STS_DMA		(1<<STS_DMA_BIT)
+#define STS_DI		(1<<STS_DI_BIT)
+#define STS_HI		(1<<STS_HI_BIT)
+#define STS_IRQMODE	(0x3<<STS_IRQMODE_BIT)
+#define STS_TRACE	(1<<STS_TRACE_BIT)
+#define STS_CFGERRVALID	(1<<STS_CFGERRVALID_BIT)
+#define STS_CFGERR	(1<<STS_CFGERR_BIT)
+#define STS_INTTYPE	(0x3f<<STS_INTTYPE_BIT)
+#define STS_INTSTS	(0xf<<STS_INTSTS_BIT)
+#define STS_FDEPTH	(0x7<<STS_FDEPTH_BIT)
+#define STS_FNUM	(0x3<<STS_FNUM_BIT)
+
+#define STS_ISYSERR	(1<<17)
+#define STS_IDMA	(1<<16)
+#define STS_IDMAERR	(1<<15)
+#define STS_IMSTABRT	(1<<14)
+#define STS_ITGTABRT	(1<<13)
+#define STS_IPARERR	(1<<12)
+
+#define STS_ERR_IRQ (STS_ISYSERR | STS_IMSTABRT | STS_ITGTABRT | STS_IPARERR)
+
+struct grpci2_bd_chan {
+	unsigned int ctrl;	/* 0x00 DMA Control */
+	unsigned int nchan;	/* 0x04 Next DMA Channel Address */
+	unsigned int nbd;	/* 0x08 Next Data Descriptor in chan */
+	unsigned int res;	/* 0x0C Reserved */
+};
+
+#define BD_CHAN_EN		0x80000000
+#define BD_CHAN_TYPE		0x00300000
+#define BD_CHAN_BDCNT		0x0000ffff
+#define BD_CHAN_EN_BIT		31
+#define BD_CHAN_TYPE_BIT	20
+#define BD_CHAN_BDCNT_BIT	0
+
+struct grpci2_bd_data {
+	unsigned int ctrl;	/* 0x00 DMA Data Control */
+	unsigned int pci_adr;	/* 0x04 PCI Start Address */
+	unsigned int ahb_adr;	/* 0x08 AHB Start address */
+	unsigned int next;	/* 0x0C Next Data Descriptor in chan */
+};
+
+#define BD_DATA_EN		0x80000000
+#define BD_DATA_IE		0x40000000
+#define BD_DATA_DR		0x20000000
+#define BD_DATA_TYPE		0x00300000
+#define BD_DATA_ER		0x00080000
+#define BD_DATA_LEN		0x0000ffff
+#define BD_DATA_EN_BIT		31
+#define BD_DATA_IE_BIT		30
+#define BD_DATA_DR_BIT		29
+#define BD_DATA_TYPE_BIT	20
+#define BD_DATA_ER_BIT		19
+#define BD_DATA_LEN_BIT		0
+
+/* GRPCI2 Capability */
+struct grpci2_cap_first {
+	unsigned int ctrl;
+	unsigned int pci2ahb_map[6];
+	unsigned int ext2ahb_map;
+	unsigned int io_map;
+	unsigned int pcibar_size[6];
+};
+#define CAP9_CTRL_OFS 0
+#define CAP9_BAR_OFS 0x4
+#define CAP9_IOMAP_OFS 0x20
+#define CAP9_BARSIZE_OFS 0x24
+
+struct grpci2_priv {
+	struct leon_pci_info	info; /* must be on top of this structure */
+	struct grpci2_regs	*regs;
+	char			irq;
+	char			irq_mode; /* IRQ Mode from CAPSTS REG */
+	char			bt_enabled;
+	char			do_reset;
+	char			irq_mask;
+	u32			pciid; /* PCI ID of Host */
+	unsigned char		irq_map[4];
+
+	/* Virtual IRQ numbers */
+	unsigned int		virq_err;
+	unsigned int		virq_dma;
+
+	/* AHB PCI Windows */
+	unsigned long		pci_area;	/* MEMORY */
+	unsigned long		pci_area_end;
+	unsigned long		pci_io;		/* I/O */
+	unsigned long		pci_conf;	/* CONFIGURATION */
+	unsigned long		pci_conf_end;
+	unsigned long		pci_io_va;
+
+	struct grpci2_barcfg	tgtbars[6];
+};
+
+DEFINE_SPINLOCK(grpci2_dev_lock);
+struct grpci2_priv *grpci2priv;
+
+int grpci2_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	struct grpci2_priv *priv = dev->bus->sysdata;
+	int irq_group;
+
+	/* Use default IRQ decoding on PCI BUS0 according slot numbering */
+	irq_group = slot & 0x3;
+	pin = ((pin - 1) + irq_group) & 0x3;
+
+	return priv->irq_map[pin];
+}
+
+static int grpci2_cfg_r32(struct grpci2_priv *priv, unsigned int bus,
+				unsigned int devfn, int where, u32 *val)
+{
+	unsigned int *pci_conf;
+	unsigned long flags;
+	u32 tmp;
+
+	if (where & 0x3)
+		return -EINVAL;
+
+	if (bus == 0 && PCI_SLOT(devfn) != 0)
+		devfn += (0x8 * 6);
+
+	/* Select bus */
+	spin_lock_irqsave(&grpci2_dev_lock, flags);
+	REGSTORE(priv->regs->ctrl, (REGLOAD(priv->regs->ctrl) & ~(0xff << 16)) |
+				   (bus << 16));
+	spin_unlock_irqrestore(&grpci2_dev_lock, flags);
+
+	/* clear old status */
+	REGSTORE(priv->regs->sts_cap, (STS_CFGERR | STS_CFGERRVALID));
+
+	pci_conf = (unsigned int *) (priv->pci_conf |
+						(devfn << 8) | (where & 0xfc));
+	tmp = LEON3_BYPASS_LOAD_PA(pci_conf);
+
+	/* Wait until GRPCI2 signals that CFG access is done, it should be
+	 * done instantaneously unless a DMA operation is ongoing...
+	 */
+	while ((REGLOAD(priv->regs->sts_cap) & STS_CFGERRVALID) == 0)
+		;
+
+	if (REGLOAD(priv->regs->sts_cap) & STS_CFGERR) {
+		*val = 0xffffffff;
+	} else {
+		/* Bus always little endian (unaffected by byte-swapping) */
+		*val = flip_dword(tmp);
+	}
+
+	return 0;
+}
+
+static int grpci2_cfg_r16(struct grpci2_priv *priv, unsigned int bus,
+				unsigned int devfn, int where, u32 *val)
+{
+	u32 v;
+	int ret;
+
+	if (where & 0x1)
+		return -EINVAL;
+	ret = grpci2_cfg_r32(priv, bus, devfn, where & ~0x3, &v);
+	*val = 0xffff & (v >> (8 * (where & 0x3)));
+	return ret;
+}
+
+static int grpci2_cfg_r8(struct grpci2_priv *priv, unsigned int bus,
+				unsigned int devfn, int where, u32 *val)
+{
+	u32 v;
+	int ret;
+
+	ret = grpci2_cfg_r32(priv, bus, devfn, where & ~0x3, &v);
+	*val = 0xff & (v >> (8 * (where & 3)));
+
+	return ret;
+}
+
+static int grpci2_cfg_w32(struct grpci2_priv *priv, unsigned int bus,
+				unsigned int devfn, int where, u32 val)
+{
+	unsigned int *pci_conf;
+	unsigned long flags;
+
+	if (where & 0x3)
+		return -EINVAL;
+
+	if (bus == 0 && PCI_SLOT(devfn) != 0)
+		devfn += (0x8 * 6);
+
+	/* Select bus */
+	spin_lock_irqsave(&grpci2_dev_lock, flags);
+	REGSTORE(priv->regs->ctrl, (REGLOAD(priv->regs->ctrl) & ~(0xff << 16)) |
+				   (bus << 16));
+	spin_unlock_irqrestore(&grpci2_dev_lock, flags);
+
+	/* clear old status */
+	REGSTORE(priv->regs->sts_cap, (STS_CFGERR | STS_CFGERRVALID));
+
+	pci_conf = (unsigned int *) (priv->pci_conf |
+						(devfn << 8) | (where & 0xfc));
+	LEON3_BYPASS_STORE_PA(pci_conf, flip_dword(val));
+
+	/* Wait until GRPCI2 signals that CFG access is done, it should be
+	 * done instantaneously unless a DMA operation is ongoing...
+	 */
+	while ((REGLOAD(priv->regs->sts_cap) & STS_CFGERRVALID) == 0)
+		;
+
+	return 0;
+}
+
+static int grpci2_cfg_w16(struct grpci2_priv *priv, unsigned int bus,
+				unsigned int devfn, int where, u32 val)
+{
+	int ret;
+	u32 v;
+
+	if (where & 0x1)
+		return -EINVAL;
+	ret = grpci2_cfg_r32(priv, bus, devfn, where&~3, &v);
+	if (ret)
+		return ret;
+	v = (v & ~(0xffff << (8 * (where & 0x3)))) |
+	    ((0xffff & val) << (8 * (where & 0x3)));
+	return grpci2_cfg_w32(priv, bus, devfn, where & ~0x3, v);
+}
+
+static int grpci2_cfg_w8(struct grpci2_priv *priv, unsigned int bus,
+				unsigned int devfn, int where, u32 val)
+{
+	int ret;
+	u32 v;
+
+	ret = grpci2_cfg_r32(priv, bus, devfn, where & ~0x3, &v);
+	if (ret != 0)
+		return ret;
+	v = (v & ~(0xff << (8 * (where & 0x3)))) |
+	    ((0xff & val) << (8 * (where & 0x3)));
+	return grpci2_cfg_w32(priv, bus, devfn, where & ~0x3, v);
+}
+
+/* Read from Configuration Space. When entering here the PCI layer has taken
+ * the pci_lock spinlock and IRQ is off.
+ */
+static int grpci2_read_config(struct pci_bus *bus, unsigned int devfn,
+			      int where, int size, u32 *val)
+{
+	struct grpci2_priv *priv = grpci2priv;
+	unsigned int busno = bus->number;
+	int ret;
+
+	if (PCI_SLOT(devfn) > 15 || (PCI_SLOT(devfn) == 0 && busno == 0)) {
+		*val = ~0;
+		return 0;
+	}
+
+	switch (size) {
+	case 1:
+		ret = grpci2_cfg_r8(priv, busno, devfn, where, val);
+		break;
+	case 2:
+		ret = grpci2_cfg_r16(priv, busno, devfn, where, val);
+		break;
+	case 4:
+		ret = grpci2_cfg_r32(priv, busno, devfn, where, val);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+#ifdef GRPCI2_DEBUG_CFGACCESS
+	printk(KERN_INFO "grpci2_read_config: [%02x:%02x:%x] ofs=%d val=%x "
+		"size=%d\n", busno, PCI_SLOT(devfn), PCI_FUNC(devfn), where,
+		*val, size);
+#endif
+
+	return ret;
+}
+
+/* Write to Configuration Space. When entering here the PCI layer has taken
+ * the pci_lock spinlock and IRQ is off.
+ */
+static int grpci2_write_config(struct pci_bus *bus, unsigned int devfn,
+			       int where, int size, u32 val)
+{
+	struct grpci2_priv *priv = grpci2priv;
+	unsigned int busno = bus->number;
+
+	if (PCI_SLOT(devfn) > 15 || (PCI_SLOT(devfn) == 0 && busno == 0))
+		return 0;
+
+#ifdef GRPCI2_DEBUG_CFGACCESS
+	printk(KERN_INFO "grpci2_write_config: [%02x:%02x:%x] ofs=%d size=%d "
+		"val=%x\n", busno, PCI_SLOT(devfn), PCI_FUNC(devfn),
+		where, size, val);
+#endif
+
+	switch (size) {
+	default:
+		return -EINVAL;
+	case 1:
+		return grpci2_cfg_w8(priv, busno, devfn, where, val);
+	case 2:
+		return grpci2_cfg_w16(priv, busno, devfn, where, val);
+	case 4:
+		return grpci2_cfg_w32(priv, busno, devfn, where, val);
+	}
+}
+
+static struct pci_ops grpci2_ops = {
+	.read =		grpci2_read_config,
+	.write =	grpci2_write_config,
+};
+
+/* GENIRQ IRQ chip implementation for GRPCI2 irqmode=0..2. In configuration
+ * 3 where all PCI Interrupts has a separate IRQ on the system IRQ controller
+ * this is not needed and the standard IRQ controller can be used.
+ */
+
+static void grpci2_mask_irq(struct irq_data *data)
+{
+	unsigned long flags;
+	unsigned int irqidx;
+	struct grpci2_priv *priv = grpci2priv;
+
+	irqidx = (unsigned int)data->chip_data - 1;
+	if (irqidx > 3) /* only mask PCI interrupts here */
+		return;
+
+	spin_lock_irqsave(&grpci2_dev_lock, flags);
+	REGSTORE(priv->regs->ctrl, REGLOAD(priv->regs->ctrl) & ~(1 << irqidx));
+	spin_unlock_irqrestore(&grpci2_dev_lock, flags);
+}
+
+static void grpci2_unmask_irq(struct irq_data *data)
+{
+	unsigned long flags;
+	unsigned int irqidx;
+	struct grpci2_priv *priv = grpci2priv;
+
+	irqidx = (unsigned int)data->chip_data - 1;
+	if (irqidx > 3) /* only unmask PCI interrupts here */
+		return;
+
+	spin_lock_irqsave(&grpci2_dev_lock, flags);
+	REGSTORE(priv->regs->ctrl, REGLOAD(priv->regs->ctrl) | (1 << irqidx));
+	spin_unlock_irqrestore(&grpci2_dev_lock, flags);
+}
+
+static unsigned int grpci2_startup_irq(struct irq_data *data)
+{
+	grpci2_unmask_irq(data);
+	return 0;
+}
+
+static void grpci2_shutdown_irq(struct irq_data *data)
+{
+	grpci2_mask_irq(data);
+}
+
+static struct irq_chip grpci2_irq = {
+	.name		= "grpci2",
+	.irq_startup	= grpci2_startup_irq,
+	.irq_shutdown	= grpci2_shutdown_irq,
+	.irq_mask	= grpci2_mask_irq,
+	.irq_unmask	= grpci2_unmask_irq,
+};
+
+/* Handle one or multiple IRQs from the PCI core */
+static void grpci2_pci_flow_irq(unsigned int irq, struct irq_desc *desc)
+{
+	struct grpci2_priv *priv = grpci2priv;
+	int i, ack = 0;
+	unsigned int ctrl, sts_cap, pci_ints;
+
+	ctrl = REGLOAD(priv->regs->ctrl);
+	sts_cap = REGLOAD(priv->regs->sts_cap);
+
+	/* Error Interrupt? */
+	if (sts_cap & STS_ERR_IRQ) {
+		generic_handle_irq(priv->virq_err);
+		ack = 1;
+	}
+
+	/* PCI Interrupt? */
+	pci_ints = ((~sts_cap) >> STS_INTSTS_BIT) & ctrl & CTRL_HOSTINT;
+	if (pci_ints) {
+		/* Call respective PCI Interrupt handler */
+		for (i = 0; i < 4; i++) {
+			if (pci_ints & (1 << i))
+				generic_handle_irq(priv->irq_map[i]);
+		}
+		ack = 1;
+	}
+
+	/*
+	 * Decode DMA Interrupt only when shared with Err and PCI INTX#, when
+	 * the DMA is a unique IRQ the DMA interrupts doesn't end up here, they
+	 * goes directly to DMA ISR.
+	 */
+	if ((priv->irq_mode == 0) && (sts_cap & (STS_IDMA | STS_IDMAERR))) {
+		generic_handle_irq(priv->virq_dma);
+		ack = 1;
+	}
+
+	/*
+	 * Call "first level" IRQ chip end-of-irq handler. It will ACK LEON IRQ
+	 * Controller, this must be done after IRQ sources have been handled to
+	 * avoid double IRQ generation
+	 */
+	if (ack)
+		desc->irq_data.chip->irq_eoi(&desc->irq_data);
+}
+
+/* Create a virtual IRQ */
+static unsigned int grpci2_build_device_irq(unsigned int irq)
+{
+	unsigned int virq = 0, pil;
+
+	pil = 1 << 8;
+	virq = irq_alloc(irq, pil);
+	if (virq == 0)
+		goto out;
+
+	irq_set_chip_and_handler_name(virq, &grpci2_irq, handle_simple_irq,
+				      "pcilvl");
+	irq_set_chip_data(virq, (void *)irq);
+
+out:
+	return virq;
+}
+
+void grpci2_hw_init(struct grpci2_priv *priv)
+{
+	u32 ahbadr, pciadr, bar_sz, capptr, io_map, data;
+	struct grpci2_regs *regs = priv->regs;
+	int i;
+	struct grpci2_barcfg *barcfg = priv->tgtbars;
+
+	/* Reset any earlier setup */
+	if (priv->do_reset) {
+		printk(KERN_INFO "GRPCI2: Resetting PCI bus\n");
+		REGSTORE(regs->ctrl, CTRL_RESET);
+		ssleep(1); /* Wait for boards to settle */
+	}
+	REGSTORE(regs->ctrl, 0);
+	REGSTORE(regs->sts_cap, ~0); /* Clear Status */
+	REGSTORE(regs->dma_ctrl, 0);
+	REGSTORE(regs->dma_bdbase, 0);
+
+	/* Translate I/O accesses to 0, I/O Space always @ PCI low 64Kbytes */
+	REGSTORE(regs->io_map, REGLOAD(regs->io_map) & 0x0000ffff);
+
+	/* set 1:1 mapping between AHB -> PCI memory space, for all Masters
+	 * Each AHB master has it's own mapping registers. Max 16 AHB masters.
+	 */
+	for (i = 0; i < 16; i++)
+		REGSTORE(regs->ahbmst_map[i], priv->pci_area);
+
+	/* Get the GRPCI2 Host PCI ID */
+	grpci2_cfg_r32(priv, 0, 0, PCI_VENDOR_ID, &priv->pciid);
+
+	/* Get address to first (always defined) capability structure */
+	grpci2_cfg_r8(priv, 0, 0, PCI_CAPABILITY_LIST, &capptr);
+
+	/* Enable/Disable Byte twisting */
+	grpci2_cfg_r32(priv, 0, 0, capptr+CAP9_IOMAP_OFS, &io_map);
+	io_map = (io_map & ~0x1) | (priv->bt_enabled ? 1 : 0);
+	grpci2_cfg_w32(priv, 0, 0, capptr+CAP9_IOMAP_OFS, io_map);
+
+	/* Setup the Host's PCI Target BARs for other peripherals to access,
+	 * and do DMA to the host's memory. The target BARs can be sized and
+	 * enabled individually.
+	 *
+	 * User may set custom target BARs, but default is:
+	 * The first BARs is used to map kernel low (DMA is part of normal
+	 * region on sparc which is SRMMU_MAXMEM big) main memory 1:1 to the
+	 * PCI bus, the other BARs are disabled. We assume that the first BAR
+	 * is always available.
+	 */
+	for (i = 0; i < 6; i++) {
+		if (barcfg[i].pciadr != ~0 && barcfg[i].ahbadr != ~0) {
+			/* Target BARs must have the proper alignment */
+			ahbadr = barcfg[i].ahbadr;
+			pciadr = barcfg[i].pciadr;
+			bar_sz = ((pciadr - 1) & ~pciadr) + 1;
+		} else {
+			if (i == 0) {
+				/* Map main memory */
+				bar_sz = 0xf0000008; /* 256MB prefetchable */
+				ahbadr = 0xf0000000 & (u32)__pa(PAGE_ALIGN(
+					(unsigned long) &_end));
+				pciadr = ahbadr;
+			} else {
+				bar_sz = 0;
+				ahbadr = 0;
+				pciadr = 0;
+			}
+		}
+		grpci2_cfg_w32(priv, 0, 0, capptr+CAP9_BARSIZE_OFS+i*4, bar_sz);
+		grpci2_cfg_w32(priv, 0, 0, PCI_BASE_ADDRESS_0+i*4, pciadr);
+		grpci2_cfg_w32(priv, 0, 0, capptr+CAP9_BAR_OFS+i*4, ahbadr);
+		printk(KERN_INFO "        TGT BAR[%d]: 0x%08x (PCI)-> 0x%08x\n",
+			i, pciadr, ahbadr);
+	}
+
+	/* set as bus master and enable pci memory responses */
+	grpci2_cfg_r32(priv, 0, 0, PCI_COMMAND, &data);
+	data |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+	grpci2_cfg_w32(priv, 0, 0, PCI_COMMAND, data);
+
+	/* Enable Error respone (CPU-TRAP) on illegal memory access. */
+	REGSTORE(regs->ctrl, CTRL_ER | CTRL_PE);
+}
+
+static irqreturn_t grpci2_jump_interrupt(int irq, void *arg)
+{
+	printk(KERN_ERR "GRPCI2: Jump IRQ happened\n");
+	return IRQ_NONE;
+}
+
+/* Handle GRPCI2 Error Interrupt */
+static irqreturn_t grpci2_err_interrupt(int irq, void *arg)
+{
+	struct grpci2_priv *priv = arg;
+	struct grpci2_regs *regs = priv->regs;
+	unsigned int status;
+
+	status = REGLOAD(regs->sts_cap);
+	if ((status & STS_ERR_IRQ) == 0)
+		return IRQ_NONE;
+
+	if (status & STS_IPARERR)
+		printk(KERN_ERR "GRPCI2: Parity Error\n");
+
+	if (status & STS_ITGTABRT)
+		printk(KERN_ERR "GRPCI2: Target Abort\n");
+
+	if (status & STS_IMSTABRT)
+		printk(KERN_ERR "GRPCI2: Master Abort\n");
+
+	if (status & STS_ISYSERR)
+		printk(KERN_ERR "GRPCI2: System Error\n");
+
+	/* Clear handled INT TYPE IRQs */
+	REGSTORE(regs->sts_cap, status & STS_ERR_IRQ);
+
+	return IRQ_HANDLED;
+}
+
+static int __devinit grpci2_of_probe(struct platform_device *ofdev)
+{
+	struct grpci2_regs *regs;
+	struct grpci2_priv *priv;
+	int err, i, len;
+	const int *tmp;
+	unsigned int capability;
+
+	if (grpci2priv) {
+		printk(KERN_ERR "GRPCI2: only one GRPCI2 core supported\n");
+		return -ENODEV;
+	}
+
+	if (ofdev->num_resources < 3) {
+		printk(KERN_ERR "GRPCI2: not enough APB/AHB resources\n");
+		return -EIO;
+	}
+
+	/* Find Device Address */
+	regs = of_ioremap(&ofdev->resource[0], 0,
+			  resource_size(&ofdev->resource[0]),
+			  "grlib-grpci2 regs");
+	if (regs == NULL) {
+		printk(KERN_ERR "GRPCI2: ioremap failed\n");
+		return -EIO;
+	}
+
+	/*
+	 * Check that we're in Host Slot and that we can act as a Host Bridge
+	 * and not only as target.
+	 */
+	capability = REGLOAD(regs->sts_cap);
+	if ((capability & STS_HOST) || !(capability & STS_MST)) {
+		printk(KERN_INFO "GRPCI2: not in host system slot\n");
+		err = -EIO;
+		goto err1;
+	}
+
+	priv = grpci2priv = kzalloc(sizeof(struct grpci2_priv), GFP_KERNEL);
+	if (grpci2priv == NULL) {
+		err = -ENOMEM;
+		goto err1;
+	}
+	memset(grpci2priv, 0, sizeof(*grpci2priv));
+	priv->regs = regs;
+	priv->irq = ofdev->archdata.irqs[0]; /* BASE IRQ */
+	priv->irq_mode = (capability & STS_IRQMODE) >> STS_IRQMODE_BIT;
+
+	printk(KERN_INFO "GRPCI2: host found at %p, irq%d\n", regs, priv->irq);
+
+	/* Byte twisting should be made configurable from kernel command line */
+	priv->bt_enabled = 1;
+
+	/* Let user do custom Target BAR assignment */
+	tmp = of_get_property(ofdev->dev.of_node, "barcfg", &len);
+	if (tmp && (len == 2*4*6))
+		memcpy(priv->tgtbars, tmp, 2*4*6);
+	else
+		memset(priv->tgtbars, -1, 2*4*6);
+
+	/* Limit IRQ unmasking in irq_mode 2 and 3 */
+	tmp = of_get_property(ofdev->dev.of_node, "irq_mask", &len);
+	if (tmp && (len == 4))
+		priv->do_reset = *tmp;
+	else
+		priv->irq_mask = 0xf;
+
+	/* Optional PCI reset. Force PCI reset on startup */
+	tmp = of_get_property(ofdev->dev.of_node, "reset", &len);
+	if (tmp && (len == 4))
+		priv->do_reset = *tmp;
+	else
+		priv->do_reset = 0;
+
+	/* Find PCI Memory, I/O and Configuration Space Windows */
+	priv->pci_area = ofdev->resource[1].start;
+	priv->pci_area_end = ofdev->resource[1].end+1;
+	priv->pci_io = ofdev->resource[2].start;
+	priv->pci_conf = ofdev->resource[2].start + 0x10000;
+	priv->pci_conf_end = priv->pci_conf + 0x10000;
+	priv->pci_io_va = (unsigned long)ioremap(priv->pci_io, 0x10000);
+	if (!priv->pci_io_va) {
+		err = -EIO;
+		goto err2;
+	}
+
+	printk(KERN_INFO
+		"GRPCI2: MEMORY SPACE [0x%08lx - 0x%08lx]\n"
+		"        I/O    SPACE [0x%08lx - 0x%08lx]\n"
+		"        CONFIG SPACE [0x%08lx - 0x%08lx]\n",
+		priv->pci_area, priv->pci_area_end-1,
+		priv->pci_io, priv->pci_conf-1,
+		priv->pci_conf, priv->pci_conf_end-1);
+
+	/*
+	 * I/O Space resources in I/O Window mapped into Virtual Adr Space
+	 * We never use low 4KB because some devices seem have problems using
+	 * address 0.
+	 */
+	memset(&priv->info.io_space, 0, sizeof(struct resource));
+	priv->info.io_space.name = "GRPCI2 PCI I/O Space";
+	priv->info.io_space.start = priv->pci_io_va + 0x1000;
+	priv->info.io_space.end = priv->pci_io_va + 0x10000 - 1;
+	priv->info.io_space.flags = IORESOURCE_IO;
+
+	/*
+	 * GRPCI2 has no prefetchable memory, map everything as
+	 * non-prefetchable memory
+	 */
+	memset(&priv->info.mem_space, 0, sizeof(struct resource));
+	priv->info.mem_space.name = "GRPCI2 PCI MEM Space";
+	priv->info.mem_space.start = priv->pci_area;
+	priv->info.mem_space.end = priv->pci_area_end - 1;
+	priv->info.mem_space.flags = IORESOURCE_MEM;
+
+	if (request_resource(&iomem_resource, &priv->info.mem_space) < 0)
+		goto err3;
+	if (request_resource(&ioport_resource, &priv->info.io_space) < 0)
+		goto err4;
+
+	grpci2_hw_init(priv);
+
+	/*
+	 * Get PCI Interrupt to System IRQ mapping and setup IRQ handling
+	 * Error IRQ always on PCI INTA.
+	 */
+	if (priv->irq_mode < 2) {
+		/* All PCI interrupts are shared using the same system IRQ */
+		leon_update_virq_handling(priv->irq, grpci2_pci_flow_irq,
+					 "pcilvl", 0);
+
+		priv->irq_map[0] = grpci2_build_device_irq(1);
+		priv->irq_map[1] = grpci2_build_device_irq(2);
+		priv->irq_map[2] = grpci2_build_device_irq(3);
+		priv->irq_map[3] = grpci2_build_device_irq(4);
+
+		priv->virq_err = grpci2_build_device_irq(5);
+		if (priv->irq_mode & 1)
+			priv->virq_dma = ofdev->archdata.irqs[1];
+		else
+			priv->virq_dma = grpci2_build_device_irq(6);
+
+		/* Enable IRQs on LEON IRQ controller */
+		err = request_irq(priv->irq, grpci2_jump_interrupt, 0,
+					"GRPCI2_JUMP", priv);
+		if (err)
+			printk(KERN_ERR "GRPCI2: ERR IRQ request failed\n");
+	} else {
+		/* All PCI interrupts have an unique IRQ interrupt */
+		for (i = 0; i < 4; i++) {
+			/* Make LEON IRQ layer handle level IRQ by acking */
+			leon_update_virq_handling(ofdev->archdata.irqs[i],
+						 handle_fasteoi_irq, "pcilvl",
+						 1);
+			priv->irq_map[i] = ofdev->archdata.irqs[i];
+		}
+		priv->virq_err = priv->irq_map[0];
+		if (priv->irq_mode & 1)
+			priv->virq_dma = ofdev->archdata.irqs[4];
+		else
+			priv->virq_dma = priv->irq_map[0];
+
+		/* Unmask all PCI interrupts, request_irq will not do that */
+		REGSTORE(regs->ctrl, REGLOAD(regs->ctrl)|(priv->irq_mask&0xf));
+	}
+
+	/* Setup IRQ handler for non-configuration space access errors */
+	err = request_irq(priv->virq_err, grpci2_err_interrupt, IRQF_SHARED,
+				"GRPCI2_ERR", priv);
+	if (err) {
+		printk(KERN_DEBUG "GRPCI2: ERR VIRQ request failed: %d\n", err);
+		goto err5;
+	}
+
+	/*
+	 * Enable Error Interrupts. PCI interrupts are unmasked once request_irq
+	 * is called by the PCI Device drivers
+	 */
+	REGSTORE(regs->ctrl, REGLOAD(regs->ctrl) | CTRL_EI | CTRL_SI);
+
+	/* Init common layer and scan buses */
+	priv->info.ops = &grpci2_ops;
+	priv->info.map_irq = grpci2_map_irq;
+	leon_pci_init(ofdev, &priv->info);
+
+	return 0;
+
+err5:
+	release_resource(&priv->info.io_space);
+err4:
+	release_resource(&priv->info.mem_space);
+err3:
+	err = -ENOMEM;
+	iounmap((void *)priv->pci_io_va);
+err2:
+	kfree(priv);
+err1:
+	of_iounmap(&ofdev->resource[0], regs,
+		resource_size(&ofdev->resource[0]));
+	return err;
+}
+
+static struct of_device_id grpci2_of_match[] = {
+	{
+	 .name = "GAISLER_GRPCI2",
+	 },
+	{
+	 .name = "01_07c",
+	 },
+	{},
+};
+
+static struct platform_driver grpci2_of_driver = {
+	.driver = {
+		.name = "grpci2",
+		.owner = THIS_MODULE,
+		.of_match_table = grpci2_of_match,
+	},
+	.probe = grpci2_of_probe,
+};
+
+static int __init grpci2_init(void)
+{
+	return platform_driver_register(&grpci2_of_driver);
+}
+
+subsys_initcall(grpci2_init);
