diff mbox series

[U-Boot,v3,7/8] powerpc: dts: Add u-boot.dtsi to use binman for MPC85xx boards

Message ID 1535990712-8359-8-git-send-email-jagdish.gediya@nxp.com
State Accepted
Commit 3a2f59e244bcd7f959686eeb931f1acb6f86628d
Delegated to: York Sun
Headers show
Series Device tree support for PowerPC in U-Boot | expand

Commit Message

Jagdish Gediya Sept. 3, 2018, 4:05 p.m. UTC 
Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
---
Changes for v2:
	- Remove mpc85xx-u-boot.dtsi
	- Update u-boot.dtsi to use CONFIG_MPC85XX_HAVE_RESET_VECTOR

Changes for v3:
	- Use 'sort-by-offset' property instead of 'sort-by-pos'

 arch/powerpc/dts/u-boot.dtsi | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)
 create mode 100644 arch/powerpc/dts/u-boot.dtsi

Comments

Simon Glass Sept. 14, 2018, 10:53 a.m. UTC | #1 
On 3 September 2018 at 18:05, Jagdish Gediya <jagdish.gediya@nxp.com> wrote:
> Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com>
> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
> ---
> Changes for v2:
>         - Remove mpc85xx-u-boot.dtsi
>         - Update u-boot.dtsi to use CONFIG_MPC85XX_HAVE_RESET_VECTOR
>
> Changes for v3:
>         - Use 'sort-by-offset' property instead of 'sort-by-pos'
>
>  arch/powerpc/dts/u-boot.dtsi | 32 ++++++++++++++++++++++++++++++++
>  1 file changed, 32 insertions(+)
>  create mode 100644 arch/powerpc/dts/u-boot.dtsi

Reviewed-by: Simon Glass <sjg@chromium.org>
diff mbox series

Patch

diff --git a/arch/powerpc/dts/u-boot.dtsi b/arch/powerpc/dts/u-boot.dtsi
new file mode 100644
index 0000000..213d543
--- /dev/null
+++ b/arch/powerpc/dts/u-boot.dtsi
@@ -0,0 +1,32 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2018 NXP
+ */
+
+#include <config.h>
+
+/ {
+	binman {
+		filename = "u-boot-with-dtb.bin";
+		skip-at-start = <CONFIG_SYS_TEXT_BASE>;
+		sort-by-offset;
+		pad-byte = <0xff>;
+		size = <CONFIG_SYS_MONITOR_LEN>;
+
+		u-boot-with-ucode-ptr {
+			offset = <CONFIG_SYS_TEXT_BASE>;
+			optional-ucode;
+		};
+
+		u-boot-dtb-with-ucode {
+#ifdef CONFIG_MPC85xx
+			align = <256>;
+#endif
+		};
+#ifdef CONFIG_MPC85XX_HAVE_RESET_VECTOR
+		powerpc-mpc85xx-bootpg-resetvec {
+			offset = <(CONFIG_RESET_VECTOR_ADDRESS - 0xffc)>;
+		};
+#endif
+	};
+};