Patchwork [20/21] atl2: add atl2 driver

login
register
mail settings
Submitter Andrew Morton
Date Sept. 22, 2008, 9:52 p.m.
Message ID <200809222152.m8MLqTnO031997@imap1.linux-foundation.org>
Download mbox | patch
Permalink /patch/965/
State Accepted
Delegated to: Jeff Garzik
Headers show

Comments

Andrew Morton - Sept. 22, 2008, 9:52 p.m.
From: Chris Snook <csnook@redhat.com>

Driver for Atheros L2 10/100 network device. Includes necessary
changes for Kconfig, Makefile, and pci_ids.h.

Signed-off-by: Chris Snook <csnook@redhat.com>
Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---

 drivers/net/Kconfig       |   11 
 drivers/net/Makefile      |    1 
 drivers/net/atlx/Makefile |    2 
 drivers/net/atlx/atl2.c   | 3127 ++++++++++++++++++++++++++++++++++++
 drivers/net/atlx/atl2.h   |  530 ++++++
 include/linux/pci_ids.h   |    1 
 6 files changed, 3672 insertions(+)

Patch

diff -puN drivers/net/Kconfig~atl2-add-atl2-driver drivers/net/Kconfig
--- a/drivers/net/Kconfig~atl2-add-atl2-driver
+++ a/drivers/net/Kconfig
@@ -1827,6 +1827,17 @@  config NE_H8300
 	  Say Y here if you want to use the NE2000 compatible
 	  controller on the Renesas H8/300 processor.
 
+config ATL2
+	tristate "Atheros L2 Fast Ethernet support"
+	depends on PCI
+	select CRC32
+	select MII
+	help
+	  This driver supports the Atheros L2 fast ethernet adapter.
+
+	  To compile this driver as a module, choose M here.  The module
+	  will be called atl2.
+
 source "drivers/net/fs_enet/Kconfig"
 
 endif # NET_ETHERNET
diff -puN drivers/net/Makefile~atl2-add-atl2-driver drivers/net/Makefile
--- a/drivers/net/Makefile~atl2-add-atl2-driver
+++ a/drivers/net/Makefile
@@ -15,6 +15,7 @@  obj-$(CONFIG_EHEA) += ehea/
 obj-$(CONFIG_CAN) += can/
 obj-$(CONFIG_BONDING) += bonding/
 obj-$(CONFIG_ATL1) += atlx/
+obj-$(CONFIG_ATL2) += atlx/
 obj-$(CONFIG_ATL1E) += atl1e/
 obj-$(CONFIG_GIANFAR) += gianfar_driver.o
 obj-$(CONFIG_TEHUTI) += tehuti.o
diff -puN drivers/net/atlx/Makefile~atl2-add-atl2-driver drivers/net/atlx/Makefile
--- a/drivers/net/atlx/Makefile~atl2-add-atl2-driver
+++ a/drivers/net/atlx/Makefile
@@ -1 +1,3 @@ 
 obj-$(CONFIG_ATL1)	+= atl1.o
+obj-$(CONFIG_ATL2)	+= atl2.o
+
diff -puN /dev/null drivers/net/atlx/atl2.c
--- /dev/null
+++ a/drivers/net/atlx/atl2.c
@@ -0,0 +1,3127 @@ 
+/*
+ * Copyright(c) 2006 - 2007 Atheros Corporation. All rights reserved.
+ * Copyright(c) 2007 - 2008 Chris Snook <csnook@redhat.com>
+ *
+ * Derived from Intel e1000 driver
+ * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#include <asm/atomic.h>
+#include <linux/crc32.h>
+#include <linux/dma-mapping.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/hardirq.h>
+#include <linux/if_vlan.h>
+#include <linux/in.h>
+#include <linux/interrupt.h>
+#include <linux/ip.h>
+#include <linux/irqflags.h>
+#include <linux/irqreturn.h>
+#include <linux/mii.h>
+#include <linux/net.h>
+#include <linux/netdevice.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/pm.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/string.h>
+#include <linux/tcp.h>
+#include <linux/timer.h>
+#include <linux/types.h>
+#include <linux/workqueue.h>
+
+#include "atl2.h"
+
+#define ATL2_DRV_VERSION "2.2.3"
+
+static char atl2_driver_name[] = "atl2";
+static const char atl2_driver_string[] = "Atheros(R) L2 Ethernet Driver";
+static char atl2_copyright[] = "Copyright (c) 2007 Atheros Corporation.";
+static char atl2_driver_version[] = ATL2_DRV_VERSION;
+
+MODULE_AUTHOR("Atheros Corporation <xiong.huang@atheros.com>, Chris Snook <csnook@redhat.com>");
+MODULE_DESCRIPTION("Atheros Fast Ethernet Network Driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(ATL2_DRV_VERSION);
+
+/*
+ * atl2_pci_tbl - PCI Device ID Table
+ */
+static struct pci_device_id atl2_pci_tbl[] = {
+	{PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L2)},
+	/* required last entry */
+	{0,}
+};
+MODULE_DEVICE_TABLE(pci, atl2_pci_tbl);
+
+static void atl2_set_ethtool_ops(struct net_device *netdev);
+
+static void atl2_check_options(struct atl2_adapter *adapter);
+
+/*
+ * atl2_sw_init - Initialize general software structures (struct atl2_adapter)
+ * @adapter: board private structure to initialize
+ *
+ * atl2_sw_init initializes the Adapter private data structure.
+ * Fields are initialized based on PCI device information and
+ * OS network device settings (MTU size).
+ */
+static int __devinit atl2_sw_init(struct atl2_adapter *adapter)
+{
+	struct atl2_hw *hw = &adapter->hw;
+	struct pci_dev *pdev = adapter->pdev;
+
+	/* PCI config space info */
+	hw->vendor_id = pdev->vendor;
+	hw->device_id = pdev->device;
+	hw->subsystem_vendor_id = pdev->subsystem_vendor;
+	hw->subsystem_id = pdev->subsystem_device;
+
+	pci_read_config_byte(pdev, PCI_REVISION_ID, &hw->revision_id);
+	pci_read_config_word(pdev, PCI_COMMAND, &hw->pci_cmd_word);
+
+	adapter->wol = 0;
+	adapter->ict = 50000;  /* ~100ms */
+	adapter->link_speed = SPEED_0;   /* hardware init */
+	adapter->link_duplex = FULL_DUPLEX;
+
+	hw->phy_configured = false;
+	hw->preamble_len = 7;
+	hw->ipgt = 0x60;
+	hw->min_ifg = 0x50;
+	hw->ipgr1 = 0x40;
+	hw->ipgr2 = 0x60;
+	hw->retry_buf = 2;
+	hw->max_retry = 0xf;
+	hw->lcol = 0x37;
+	hw->jam_ipg = 7;
+	hw->fc_rxd_hi = 0;
+	hw->fc_rxd_lo = 0;
+	hw->max_frame_size = adapter->netdev->mtu;
+
+	spin_lock_init(&adapter->stats_lock);
+	spin_lock_init(&adapter->tx_lock);
+
+	set_bit(__ATL2_DOWN, &adapter->flags);
+
+	return 0;
+}
+
+/*
+ * atl2_set_multi - Multicast and Promiscuous mode set
+ * @netdev: network interface device structure
+ *
+ * The set_multi entry point is called whenever the multicast address
+ * list or the network interface flags are updated.  This routine is
+ * responsible for configuring the hardware for proper multicast,
+ * promiscuous mode, and all-multi behavior.
+ */
+static void atl2_set_multi(struct net_device *netdev)
+{
+	struct atl2_adapter *adapter = netdev_priv(netdev);
+	struct atl2_hw *hw = &adapter->hw;
+	struct dev_mc_list *mc_ptr;
+	u32 rctl;
+	u32 hash_value;
+
+	/* Check for Promiscuous and All Multicast modes */
+	rctl = ATL2_READ_REG(hw, REG_MAC_CTRL);
+
+	if (netdev->flags & IFF_PROMISC) {
+		rctl |= MAC_CTRL_PROMIS_EN;
+	} else if (netdev->flags & IFF_ALLMULTI) {
+		rctl |= MAC_CTRL_MC_ALL_EN;
+		rctl &= ~MAC_CTRL_PROMIS_EN;
+	} else
+		rctl &= ~(MAC_CTRL_PROMIS_EN | MAC_CTRL_MC_ALL_EN);
+
+	ATL2_WRITE_REG(hw, REG_MAC_CTRL, rctl);
+
+	/* clear the old settings from the multicast hash table */
+	ATL2_WRITE_REG(hw, REG_RX_HASH_TABLE, 0);
+	ATL2_WRITE_REG_ARRAY(hw, REG_RX_HASH_TABLE, 1, 0);
+
+	/* comoute mc addresses' hash value ,and put it into hash table */
+	for (mc_ptr = netdev->mc_list; mc_ptr; mc_ptr = mc_ptr->next) {
+		hash_value = atl2_hash_mc_addr(hw, mc_ptr->dmi_addr);
+		atl2_hash_set(hw, hash_value);
+	}
+}
+
+static void init_ring_ptrs(struct atl2_adapter *adapter)
+{
+	/* Read / Write Ptr Initialize: */
+	adapter->txd_write_ptr = 0;
+	atomic_set(&adapter->txd_read_ptr, 0);
+
+	adapter->rxd_read_ptr = 0;
+	adapter->rxd_write_ptr = 0;
+
+	atomic_set(&adapter->txs_write_ptr, 0);
+	adapter->txs_next_clear = 0;
+}
+
+/*
+ * atl2_configure - Configure Transmit&Receive Unit after Reset
+ * @adapter: board private structure
+ *
+ * Configure the Tx /Rx unit of the MAC after a reset.
+ */
+static int atl2_configure(struct atl2_adapter *adapter)
+{
+	struct atl2_hw *hw = &adapter->hw;
+	u32 value;
+
+	/* clear interrupt status */
+	ATL2_WRITE_REG(&adapter->hw, REG_ISR, 0xffffffff);
+
+	/* set MAC Address */
+	value = (((u32)hw->mac_addr[2]) << 24) |
+		(((u32)hw->mac_addr[3]) << 16) |
+		(((u32)hw->mac_addr[4]) << 8) |
+		(((u32)hw->mac_addr[5]));
+	ATL2_WRITE_REG(hw, REG_MAC_STA_ADDR, value);
+	value = (((u32)hw->mac_addr[0]) << 8) |
+		(((u32)hw->mac_addr[1]));
+	ATL2_WRITE_REG(hw, (REG_MAC_STA_ADDR+4), value);
+
+	/* HI base address */
+	ATL2_WRITE_REG(hw, REG_DESC_BASE_ADDR_HI,
+		(u32)((adapter->ring_dma & 0xffffffff00000000ULL) >> 32));
+
+	/* LO base address */
+	ATL2_WRITE_REG(hw, REG_TXD_BASE_ADDR_LO,
+		(u32)(adapter->txd_dma & 0x00000000ffffffffULL));
+	ATL2_WRITE_REG(hw, REG_TXS_BASE_ADDR_LO,
+		(u32)(adapter->txs_dma & 0x00000000ffffffffULL));
+	ATL2_WRITE_REG(hw, REG_RXD_BASE_ADDR_LO,
+		(u32)(adapter->rxd_dma & 0x00000000ffffffffULL));
+
+	/* element count */
+	ATL2_WRITE_REGW(hw, REG_TXD_MEM_SIZE, (u16)(adapter->txd_ring_size/4));
+	ATL2_WRITE_REGW(hw, REG_TXS_MEM_SIZE, (u16)adapter->txs_ring_size);
+	ATL2_WRITE_REGW(hw, REG_RXD_BUF_NUM,  (u16)adapter->rxd_ring_size);
+
+	/* config Internal SRAM */
+/*
+    ATL2_WRITE_REGW(hw, REG_SRAM_TXRAM_END, sram_tx_end);
+    ATL2_WRITE_REGW(hw, REG_SRAM_TXRAM_END, sram_rx_end);
+*/
+
+	/* config IPG/IFG */
+	value = (((u32)hw->ipgt & MAC_IPG_IFG_IPGT_MASK) <<
+		MAC_IPG_IFG_IPGT_SHIFT) |
+		(((u32)hw->min_ifg & MAC_IPG_IFG_MIFG_MASK) <<
+		MAC_IPG_IFG_MIFG_SHIFT) |
+		(((u32)hw->ipgr1 & MAC_IPG_IFG_IPGR1_MASK) <<
+		MAC_IPG_IFG_IPGR1_SHIFT)|
+		(((u32)hw->ipgr2 & MAC_IPG_IFG_IPGR2_MASK) <<
+		MAC_IPG_IFG_IPGR2_SHIFT);
+	ATL2_WRITE_REG(hw, REG_MAC_IPG_IFG, value);
+
+	/* config  Half-Duplex Control */
+	value = ((u32)hw->lcol & MAC_HALF_DUPLX_CTRL_LCOL_MASK) |
+		(((u32)hw->max_retry & MAC_HALF_DUPLX_CTRL_RETRY_MASK) <<
+		MAC_HALF_DUPLX_CTRL_RETRY_SHIFT) |
+		MAC_HALF_DUPLX_CTRL_EXC_DEF_EN |
+		(0xa << MAC_HALF_DUPLX_CTRL_ABEBT_SHIFT) |
+		(((u32)hw->jam_ipg & MAC_HALF_DUPLX_CTRL_JAMIPG_MASK) <<
+		MAC_HALF_DUPLX_CTRL_JAMIPG_SHIFT);
+	ATL2_WRITE_REG(hw, REG_MAC_HALF_DUPLX_CTRL, value);
+
+	/* set Interrupt Moderator Timer */
+	ATL2_WRITE_REGW(hw, REG_IRQ_MODU_TIMER_INIT, adapter->imt);
+	ATL2_WRITE_REG(hw, REG_MASTER_CTRL, MASTER_CTRL_ITIMER_EN);
+
+	/* set Interrupt Clear Timer */
+	ATL2_WRITE_REGW(hw, REG_CMBDISDMA_TIMER, adapter->ict);
+
+	/* set MTU */
+	ATL2_WRITE_REG(hw, REG_MTU, adapter->netdev->mtu +
+		ENET_HEADER_SIZE + VLAN_SIZE + ETHERNET_FCS_SIZE);
+
+	/* 1590 */
+	ATL2_WRITE_REG(hw, REG_TX_CUT_THRESH, 0x177);
+
+	/* flow control */
+	ATL2_WRITE_REGW(hw, REG_PAUSE_ON_TH, hw->fc_rxd_hi);
+	ATL2_WRITE_REGW(hw, REG_PAUSE_OFF_TH, hw->fc_rxd_lo);
+
+	/* Init mailbox */
+	ATL2_WRITE_REGW(hw, REG_MB_TXD_WR_IDX, (u16)adapter->txd_write_ptr);
+	ATL2_WRITE_REGW(hw, REG_MB_RXD_RD_IDX, (u16)adapter->rxd_read_ptr);
+
+	/* enable DMA read/write */
+	ATL2_WRITE_REGB(hw, REG_DMAR, DMAR_EN);
+	ATL2_WRITE_REGB(hw, REG_DMAW, DMAW_EN);
+
+	value = ATL2_READ_REG(&adapter->hw, REG_ISR);
+	if ((value & ISR_PHY_LINKDOWN) != 0)
+		value = 1; /* config failed */
+	else
+		value = 0;
+
+	/* clear all interrupt status */
+	ATL2_WRITE_REG(&adapter->hw, REG_ISR, 0x3fffffff);
+	ATL2_WRITE_REG(&adapter->hw, REG_ISR, 0);
+	return value;
+}
+
+/*
+ * atl2_setup_ring_resources - allocate Tx / RX descriptor resources
+ * @adapter: board private structure
+ *
+ * Return 0 on success, negative on failure
+ */
+static s32 atl2_setup_ring_resources(struct atl2_adapter *adapter)
+{
+	struct pci_dev *pdev = adapter->pdev;
+	int size;
+	u8 offset = 0;
+
+	/* real ring DMA buffer */
+	adapter->ring_size = size =
+		adapter->txd_ring_size * 1 + 7 +	/* dword align */
+		adapter->txs_ring_size * 4 + 7 +	/* dword align */
+		adapter->rxd_ring_size * 1536 + 127;	/* 128bytes align */
+
+	adapter->ring_vir_addr = pci_alloc_consistent(pdev, size,
+		&adapter->ring_dma);
+	if (!adapter->ring_vir_addr)
+		return -ENOMEM;
+	memset(adapter->ring_vir_addr, 0, adapter->ring_size);
+
+	/* Init TXD Ring */
+	adapter->txd_dma = adapter->ring_dma ;
+	offset = (adapter->txd_dma & 0x7) ? (8 - (adapter->txd_dma & 0x7)) : 0;
+	adapter->txd_dma += offset;
+	adapter->txd_ring = (struct tx_pkt_header *) (adapter->ring_vir_addr +
+		offset);
+
+	/* Init TXS Ring */
+	adapter->txs_dma = adapter->txd_dma + adapter->txd_ring_size;
+	offset = (adapter->txs_dma & 0x7) ? (8 - (adapter->txs_dma & 0x7)) : 0;
+	adapter->txs_dma += offset;
+	adapter->txs_ring = (struct tx_pkt_status *)
+		(((u8 *)adapter->txd_ring) + (adapter->txd_ring_size + offset));
+
+	/* Init RXD Ring */
+	adapter->rxd_dma = adapter->txs_dma + adapter->txs_ring_size * 4;
+	offset = (adapter->rxd_dma & 127) ?
+		(128 - (adapter->rxd_dma & 127)) : 0;
+	if (offset > 7)
+		offset -= 8;
+	else
+		offset += (128 - 8);
+
+	adapter->rxd_dma += offset;
+	adapter->rxd_ring = (struct rx_desc *) (((u8 *)adapter->txs_ring) +
+		(adapter->txs_ring_size * 4 + offset));
+
+/*
+ * Read / Write Ptr Initialize:
+ *      init_ring_ptrs(adapter);
+ */
+	return 0;
+}
+
+/*
+ * atl2_irq_enable - Enable default interrupt generation settings
+ * @adapter: board private structure
+ */
+static inline void atl2_irq_enable(struct atl2_adapter *adapter)
+{
+	ATL2_WRITE_REG(&adapter->hw, REG_IMR, IMR_NORMAL_MASK);
+	ATL2_WRITE_FLUSH(&adapter->hw);
+}
+
+/*
+ * atl2_irq_disable - Mask off interrupt generation on the NIC
+ * @adapter: board private structure
+ */
+static inline void atl2_irq_disable(struct atl2_adapter *adapter)
+{
+    ATL2_WRITE_REG(&adapter->hw, REG_IMR, 0);
+    ATL2_WRITE_FLUSH(&adapter->hw);
+    synchronize_irq(adapter->pdev->irq);
+}
+
+#ifdef NETIF_F_HW_VLAN_TX
+static void atl2_vlan_rx_register(struct net_device *netdev,
+	struct vlan_group *grp)
+{
+	struct atl2_adapter *adapter = netdev_priv(netdev);
+	u32 ctrl;
+
+	atl2_irq_disable(adapter);
+	adapter->vlgrp = grp;
+
+	if (grp) {
+		/* enable VLAN tag insert/strip */
+		ctrl = ATL2_READ_REG(&adapter->hw, REG_MAC_CTRL);
+		ctrl |= MAC_CTRL_RMV_VLAN;
+		ATL2_WRITE_REG(&adapter->hw, REG_MAC_CTRL, ctrl);
+	} else {
+		/* disable VLAN tag insert/strip */
+		ctrl = ATL2_READ_REG(&adapter->hw, REG_MAC_CTRL);
+		ctrl &= ~MAC_CTRL_RMV_VLAN;
+		ATL2_WRITE_REG(&adapter->hw, REG_MAC_CTRL, ctrl);
+	}
+
+	atl2_irq_enable(adapter);
+}
+
+static void atl2_restore_vlan(struct atl2_adapter *adapter)
+{
+	atl2_vlan_rx_register(adapter->netdev, adapter->vlgrp);
+}
+#endif
+
+static void atl2_intr_rx(struct atl2_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	struct rx_desc *rxd;
+	struct sk_buff *skb;
+
+	do {
+		rxd = adapter->rxd_ring+adapter->rxd_write_ptr;
+		if (!rxd->status.update)
+			break; /* end of tx */
+
+		/* clear this flag at once */
+		rxd->status.update = 0;
+
+		if (rxd->status.ok && rxd->status.pkt_size >= 60) {
+			int rx_size = (int)(rxd->status.pkt_size - 4);
+			/* alloc new buffer */
+			skb = netdev_alloc_skb(netdev, rx_size + NET_IP_ALIGN);
+			if (NULL == skb) {
+				printk(KERN_WARNING
+					"%s: Mem squeeze, deferring packet.\n",
+					netdev->name);
+				/*
+				 * Check that some rx space is free. If not,
+				 * free one and mark stats->rx_dropped++.
+				 */
+				adapter->net_stats.rx_dropped++;
+				break;
+			}
+			skb_reserve(skb, NET_IP_ALIGN);
+			skb->dev = netdev;
+			memcpy(skb->data, rxd->packet, rx_size);
+			skb_put(skb, rx_size);
+			skb->protocol = eth_type_trans(skb, netdev);
+#ifdef NETIF_F_HW_VLAN_TX
+			if (adapter->vlgrp && (rxd->status.vlan)) {
+				u16 vlan_tag = (rxd->status.vtag>>4) |
+					((rxd->status.vtag&7) << 13) |
+					((rxd->status.vtag&8) << 9);
+				vlan_hwaccel_rx(skb, adapter->vlgrp, vlan_tag);
+			} else
+#endif
+			netif_rx(skb);
+			adapter->net_stats.rx_bytes += rx_size;
+			adapter->net_stats.rx_packets++;
+			netdev->last_rx = jiffies;
+		} else {
+			adapter->net_stats.rx_errors++;
+
+			if (rxd->status.ok && rxd->status.pkt_size <= 60)
+				adapter->net_stats.rx_length_errors++;
+			if (rxd->status.mcast)
+				adapter->net_stats.multicast++;
+			if (rxd->status.crc)
+				adapter->net_stats.rx_crc_errors++;
+			if (rxd->status.align)
+				adapter->net_stats.rx_frame_errors++;
+		}
+
+		/* advance write ptr */
+		if (++adapter->rxd_write_ptr == adapter->rxd_ring_size)
+			adapter->rxd_write_ptr = 0;
+	} while (1);
+
+	/* update mailbox? */
+	adapter->rxd_read_ptr = adapter->rxd_write_ptr;
+	ATL2_WRITE_REGW(&adapter->hw, REG_MB_RXD_RD_IDX, adapter->rxd_read_ptr);
+}
+
+static void atl2_intr_tx(struct atl2_adapter *adapter)
+{
+	u32 txd_read_ptr;
+	u32 txs_write_ptr;
+	struct tx_pkt_status *txs;
+	struct tx_pkt_header *txph;
+	int free_hole = 0;
+
+	do {
+		txs_write_ptr = (u32) atomic_read(&adapter->txs_write_ptr);
+		txs = adapter->txs_ring + txs_write_ptr;
+		if (!txs->update)
+			break; /* tx stop here */
+
+		free_hole = 1;
+		txs->update = 0;
+
+		if (++txs_write_ptr == adapter->txs_ring_size)
+			txs_write_ptr = 0;
+		atomic_set(&adapter->txs_write_ptr, (int)txs_write_ptr);
+
+		txd_read_ptr = (u32) atomic_read(&adapter->txd_read_ptr);
+		txph = (struct tx_pkt_header *)
+			(((u8 *)adapter->txd_ring) + txd_read_ptr);
+
+		if (txph->pkt_size != txs->pkt_size) {
+			struct tx_pkt_status *old_txs = txs;
+			printk(KERN_WARNING
+				"%s: txs packet size not consistent with txd"
+				" txd_:0x%08x, txs_:0x%08x!\n",
+				adapter->netdev->name,
+				*(u32 *)txph, *(u32 *)txs);
+			printk(KERN_WARNING
+				"txd read ptr: 0x%x\n",
+				txd_read_ptr);
+			txs = adapter->txs_ring + txs_write_ptr;
+			printk(KERN_WARNING
+				"txs-behind:0x%08x\n",
+				*(u32 *)txs);
+			if (txs_write_ptr < 2) {
+				txs = adapter->txs_ring +
+					(adapter->txs_ring_size +
+					txs_write_ptr - 2);
+			} else {
+				txs = adapter->txs_ring + (txs_write_ptr - 2);
+			}
+			printk(KERN_WARNING
+				"txs-before:0x%08x\n",
+				*(u32 *)txs);
+			txs = old_txs;
+		}
+
+		 /* 4for TPH */
+		txd_read_ptr += (((u32)(txph->pkt_size) + 7) & ~3);
+		if (txd_read_ptr >= adapter->txd_ring_size)
+			txd_read_ptr -= adapter->txd_ring_size;
+
+		atomic_set(&adapter->txd_read_ptr, (int)txd_read_ptr);
+
+		/* tx statistics: */
+		if (txs->ok)
+			adapter->net_stats.tx_packets++;
+		else
+			adapter->net_stats.tx_errors++;
+
+		if (txs->defer)
+			adapter->net_stats.collisions++;
+		if (txs->abort_col)
+			adapter->net_stats.tx_aborted_errors++;
+		if (txs->late_col)
+			adapter->net_stats.tx_window_errors++;
+		if (txs->underun)
+			adapter->net_stats.tx_fifo_errors++;
+	} while (1);
+
+	if (free_hole) {
+		if (netif_queue_stopped(adapter->netdev) &&
+			netif_carrier_ok(adapter->netdev))
+			netif_wake_queue(adapter->netdev);
+	}
+}
+
+static void atl2_check_for_link(struct atl2_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	u16 phy_data = 0;
+
+	spin_lock(&adapter->stats_lock);
+	atl2_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data);
+	atl2_read_phy_reg(&adapter->hw, MII_BMSR, &phy_data);
+	spin_unlock(&adapter->stats_lock);
+
+	/* notify upper layer link down ASAP */
+	if (!(phy_data & BMSR_LSTATUS)) { /* Link Down */
+		if (netif_carrier_ok(netdev)) { /* old link state: Up */
+		printk(KERN_INFO "%s: %s NIC Link is Down\n",
+			atl2_driver_name, netdev->name);
+		adapter->link_speed = SPEED_0;
+		netif_carrier_off(netdev);
+		netif_stop_queue(netdev);
+		}
+	}
+	schedule_work(&adapter->link_chg_task);
+}
+
+static inline void atl2_clear_phy_int(struct atl2_adapter *adapter)
+{
+	u16 phy_data;
+	spin_lock(&adapter->stats_lock);
+	atl2_read_phy_reg(&adapter->hw, 19, &phy_data);
+	spin_unlock(&adapter->stats_lock);
+}
+
+/*
+ * atl2_intr - Interrupt Handler
+ * @irq: interrupt number
+ * @data: pointer to a network interface device structure
+ * @pt_regs: CPU registers structure
+ */
+static irqreturn_t atl2_intr(int irq, void *data)
+{
+	struct atl2_adapter *adapter = netdev_priv(data);
+	struct atl2_hw *hw = &adapter->hw;
+	u32 status;
+
+	status = ATL2_READ_REG(hw, REG_ISR);
+	if (0 == status)
+		return IRQ_NONE;
+
+	/* link event */
+	if (status & ISR_PHY)
+		atl2_clear_phy_int(adapter);
+
+	/* clear ISR status, and Enable CMB DMA/Disable Interrupt */
+	ATL2_WRITE_REG(hw, REG_ISR, status | ISR_DIS_INT);
+
+	/* check if PCIE PHY Link down */
+	if (status & ISR_PHY_LINKDOWN) {
+		if (netif_running(adapter->netdev)) { /* reset MAC */
+			ATL2_WRITE_REG(hw, REG_ISR, 0);
+			ATL2_WRITE_REG(hw, REG_IMR, 0);
+			ATL2_WRITE_FLUSH(hw);
+			schedule_work(&adapter->reset_task);
+			return IRQ_HANDLED;
+		}
+	}
+
+	/* check if DMA read/write error? */
+	if (status & (ISR_DMAR_TO_RST | ISR_DMAW_TO_RST)) {
+		ATL2_WRITE_REG(hw, REG_ISR, 0);
+		ATL2_WRITE_REG(hw, REG_IMR, 0);
+		ATL2_WRITE_FLUSH(hw);
+		schedule_work(&adapter->reset_task);
+		return IRQ_HANDLED;
+	}
+
+	/* link event */
+	if (status & (ISR_PHY | ISR_MANUAL)) {
+		adapter->net_stats.tx_carrier_errors++;
+		atl2_check_for_link(adapter);
+	}
+
+	/* transmit event */
+	if (status & ISR_TX_EVENT)
+		atl2_intr_tx(adapter);
+
+	/* rx exception */
+	if (status & ISR_RX_EVENT)
+		atl2_intr_rx(adapter);
+
+	/* re-enable Interrupt */
+	ATL2_WRITE_REG(&adapter->hw, REG_ISR, 0);
+	return IRQ_HANDLED;
+}
+
+static int atl2_request_irq(struct atl2_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	int flags, err = 0;
+
+	flags = IRQF_SHARED;
+#ifdef CONFIG_PCI_MSI
+	adapter->have_msi = true;
+	err = pci_enable_msi(adapter->pdev);
+	if (err)
+		adapter->have_msi = false;
+
+	if (adapter->have_msi)
+		flags &= ~IRQF_SHARED;
+#endif
+
+	return request_irq(adapter->pdev->irq, &atl2_intr, flags, netdev->name,
+		netdev);
+}
+
+/*
+ * atl2_free_ring_resources - Free Tx / RX descriptor Resources
+ * @adapter: board private structure
+ *
+ * Free all transmit software resources
+ */
+static void atl2_free_ring_resources(struct atl2_adapter *adapter)
+{
+	struct pci_dev *pdev = adapter->pdev;
+	pci_free_consistent(pdev, adapter->ring_size, adapter->ring_vir_addr,
+		adapter->ring_dma);
+}
+
+/*
+ * atl2_open - Called when a network interface is made active
+ * @netdev: network interface device structure
+ *
+ * Returns 0 on success, negative value on failure
+ *
+ * The open entry point is called when a network interface is made
+ * active by the system (IFF_UP).  At this point all resources needed
+ * for transmit and receive operations are allocated, the interrupt
+ * handler is registered with the OS, the watchdog timer is started,
+ * and the stack is notified that the interface is ready.
+ */
+static int atl2_open(struct net_device *netdev)
+{
+	struct atl2_adapter *adapter = netdev_priv(netdev);
+	int err;
+	u32 val;
+
+	/* disallow open during test */
+	if (test_bit(__ATL2_TESTING, &adapter->flags))
+		return -EBUSY;
+
+	/* allocate transmit descriptors */
+	err = atl2_setup_ring_resources(adapter);
+	if (err)
+		return err;
+
+	err = atl2_init_hw(&adapter->hw);
+	if (err) {
+		err = -EIO;
+		goto err_init_hw;
+	}
+
+	/* hardware has been reset, we need to reload some things */
+	atl2_set_multi(netdev);
+	init_ring_ptrs(adapter);
+
+#ifdef NETIF_F_HW_VLAN_TX
+	atl2_restore_vlan(adapter);
+#endif
+
+	if (atl2_configure(adapter)) {
+		err = -EIO;
+		goto err_config;
+	}
+
+	err = atl2_request_irq(adapter);
+	if (err)
+		goto err_req_irq;
+
+	clear_bit(__ATL2_DOWN, &adapter->flags);
+
+	mod_timer(&adapter->watchdog_timer, jiffies + 4*HZ);
+
+	val = ATL2_READ_REG(&adapter->hw, REG_MASTER_CTRL);
+	ATL2_WRITE_REG(&adapter->hw, REG_MASTER_CTRL,
+		val | MASTER_CTRL_MANUAL_INT);
+
+	atl2_irq_enable(adapter);
+
+	return 0;
+
+err_init_hw:
+err_req_irq:
+err_config:
+	atl2_free_ring_resources(adapter);
+	atl2_reset_hw(&adapter->hw);
+
+	return err;
+}
+
+static void atl2_down(struct atl2_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+
+	/* signal that we're down so the interrupt handler does not
+	 * reschedule our watchdog timer */
+	set_bit(__ATL2_DOWN, &adapter->flags);
+
+#ifdef NETIF_F_LLTX
+	netif_stop_queue(netdev);
+#else
+	netif_tx_disable(netdev);
+#endif
+
+	/* reset MAC to disable all RX/TX */
+	atl2_reset_hw(&adapter->hw);
+	msleep(1);
+
+	atl2_irq_disable(adapter);
+
+	del_timer_sync(&adapter->watchdog_timer);
+	del_timer_sync(&adapter->phy_config_timer);
+	clear_bit(0, &adapter->cfg_phy);
+
+	netif_carrier_off(netdev);
+	adapter->link_speed = SPEED_0;
+	adapter->link_duplex = -1;
+}
+
+static void atl2_free_irq(struct atl2_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+
+	free_irq(adapter->pdev->irq, netdev);
+
+#ifdef CONFIG_PCI_MSI
+	if (adapter->have_msi)
+		pci_disable_msi(adapter->pdev);
+#endif
+}
+
+/*
+ * atl2_close - Disables a network interface
+ * @netdev: network interface device structure
+ *
+ * Returns 0, this is not allowed to fail
+ *
+ * The close entry point is called when an interface is de-activated
+ * by the OS.  The hardware is still under the drivers control, but
+ * needs to be disabled.  A global MAC reset is issued to stop the
+ * hardware, and all transmit and receive resources are freed.
+ */
+static int atl2_close(struct net_device *netdev)
+{
+	struct atl2_adapter *adapter = netdev_priv(netdev);
+
+	WARN_ON(test_bit(__ATL2_RESETTING, &adapter->flags));
+
+	atl2_down(adapter);
+	atl2_free_irq(adapter);
+	atl2_free_ring_resources(adapter);
+
+	return 0;
+}
+
+static inline int TxsFreeUnit(struct atl2_adapter *adapter)
+{
+	u32 txs_write_ptr = (u32) atomic_read(&adapter->txs_write_ptr);
+
+	return (adapter->txs_next_clear >= txs_write_ptr) ?
+		(int) (adapter->txs_ring_size - adapter->txs_next_clear +
+		txs_write_ptr - 1) :
+		(int) (txs_write_ptr - adapter->txs_next_clear - 1);
+}
+
+static inline int TxdFreeBytes(struct atl2_adapter *adapter)
+{
+	u32 txd_read_ptr = (u32)atomic_read(&adapter->txd_read_ptr);
+
+	return (adapter->txd_write_ptr >= txd_read_ptr) ?
+		(int) (adapter->txd_ring_size - adapter->txd_write_ptr +
+		txd_read_ptr - 1) :
+		(int) (txd_read_ptr - adapter->txd_write_ptr - 1);
+}
+
+static int atl2_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
+{
+	struct atl2_adapter *adapter = netdev_priv(netdev);
+	unsigned long flags;
+	struct tx_pkt_header *txph;
+	u32 offset, copy_len;
+	int txs_unused;
+	int txbuf_unused;
+
+	if (test_bit(__ATL2_DOWN, &adapter->flags)) {
+		dev_kfree_skb_any(skb);
+		return NETDEV_TX_OK;
+	}
+
+	if (unlikely(skb->len <= 0)) {
+		dev_kfree_skb_any(skb);
+		return NETDEV_TX_OK;
+	}
+
+#ifdef NETIF_F_LLTX
+	local_irq_save(flags);
+	if (!spin_trylock(&adapter->tx_lock)) {
+		/* Collision - tell upper layer to requeue */
+		local_irq_restore(flags);
+		return NETDEV_TX_LOCKED;
+	}
+#else
+	spin_lock_irqsave(&adapter->tx_lock, flags);
+#endif
+	txs_unused = TxsFreeUnit(adapter);
+	txbuf_unused = TxdFreeBytes(adapter);
+
+	if (skb->len + sizeof(struct tx_pkt_header) + 4  > txbuf_unused ||
+		txs_unused < 1) {
+		/* not enough resources */
+		netif_stop_queue(netdev);
+		spin_unlock_irqrestore(&adapter->tx_lock, flags);
+		return NETDEV_TX_BUSY;
+	}
+
+	offset = adapter->txd_write_ptr;
+
+	txph = (struct tx_pkt_header *) (((u8 *)adapter->txd_ring) + offset);
+
+	*(u32 *)txph = 0;
+	txph->pkt_size = skb->len;
+
+	offset += 4;
+	if (offset >= adapter->txd_ring_size)
+		offset -= adapter->txd_ring_size;
+	copy_len = adapter->txd_ring_size - offset;
+	if (copy_len >= skb->len) {
+		memcpy(((u8 *)adapter->txd_ring) + offset, skb->data, skb->len);
+		offset += ((u32)(skb->len + 3) & ~3);
+	} else {
+		memcpy(((u8 *)adapter->txd_ring)+offset, skb->data, copy_len);
+		memcpy((u8 *)adapter->txd_ring, skb->data+copy_len,
+			skb->len-copy_len);
+		offset = ((u32)(skb->len-copy_len + 3) & ~3);
+	}
+#ifdef NETIF_F_HW_VLAN_TX
+	if (adapter->vlgrp && vlan_tx_tag_present(skb)) {
+		u16 vlan_tag = vlan_tx_tag_get(skb);
+		vlan_tag = (vlan_tag << 4) |
+			(vlan_tag >> 13) |
+			((vlan_tag >> 9) & 0x8);
+		txph->ins_vlan = 1;
+		txph->vlan = vlan_tag;
+	}
+#endif
+	if (offset >= adapter->txd_ring_size)
+		offset -= adapter->txd_ring_size;
+	adapter->txd_write_ptr = offset;
+
+	/* clear txs before send */
+	adapter->txs_ring[adapter->txs_next_clear].update = 0;
+	if (++adapter->txs_next_clear == adapter->txs_ring_size)
+		adapter->txs_next_clear = 0;
+
+	ATL2_WRITE_REGW(&adapter->hw, REG_MB_TXD_WR_IDX,
+		(adapter->txd_write_ptr >> 2));
+
+	spin_unlock_irqrestore(&adapter->tx_lock, flags);
+
+	netdev->trans_start = jiffies;
+	dev_kfree_skb_any(skb);
+	return NETDEV_TX_OK;
+}
+
+/*
+ * atl2_get_stats - Get System Network Statistics
+ * @netdev: network interface device structure
+ *
+ * Returns the address of the device statistics structure.
+ * The statistics are actually updated from the timer callback.
+ */
+static struct net_device_stats *atl2_get_stats(struct net_device *netdev)
+{
+	struct atl2_adapter *adapter = netdev_priv(netdev);
+	return &adapter->net_stats;
+}
+
+/*
+ * atl2_change_mtu - Change the Maximum Transfer Unit
+ * @netdev: network interface device structure
+ * @new_mtu: new value for maximum frame size
+ *
+ * Returns 0 on success, negative on failure
+ */
+static int atl2_change_mtu(struct net_device *netdev, int new_mtu)
+{
+	struct atl2_adapter *adapter = netdev_priv(netdev);
+	struct atl2_hw *hw = &adapter->hw;
+
+	if ((new_mtu < 40) || (new_mtu > (ETH_DATA_LEN + VLAN_SIZE)))
+		return -EINVAL;
+
+	/* set MTU */
+	if (hw->max_frame_size != new_mtu) {
+		netdev->mtu = new_mtu;
+		ATL2_WRITE_REG(hw, REG_MTU, new_mtu + ENET_HEADER_SIZE +
+			VLAN_SIZE + ETHERNET_FCS_SIZE);
+	}
+
+	return 0;
+}
+
+/*
+ * atl2_set_mac - Change the Ethernet Address of the NIC
+ * @netdev: network interface device structure
+ * @p: pointer to an address structure
+ *
+ * Returns 0 on success, negative on failure
+ */
+static int atl2_set_mac(struct net_device *netdev, void *p)
+{
+	struct atl2_adapter *adapter = netdev_priv(netdev);
+	struct sockaddr *addr = p;
+
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EADDRNOTAVAIL;
+
+	if (netif_running(netdev))
+		return -EBUSY;
+
+	memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+	memcpy(adapter->hw.mac_addr, addr->sa_data, netdev->addr_len);
+
+	atl2_set_mac_addr(&adapter->hw);
+
+	return 0;
+}
+
+/*
+ * atl2_mii_ioctl -
+ * @netdev:
+ * @ifreq:
+ * @cmd:
+ */
+static int atl2_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
+{
+	struct atl2_adapter *adapter = netdev_priv(netdev);
+	struct mii_ioctl_data *data = if_mii(ifr);
+	unsigned long flags;
+
+	switch (cmd) {
+	case SIOCGMIIPHY:
+		data->phy_id = 0;
+		break;
+	case SIOCGMIIREG:
+		if (!capable(CAP_NET_ADMIN))
+			return -EPERM;
+		spin_lock_irqsave(&adapter->stats_lock, flags);
+		if (atl2_read_phy_reg(&adapter->hw,
+			data->reg_num & 0x1F, &data->val_out)) {
+			spin_unlock_irqrestore(&adapter->stats_lock, flags);
+			return -EIO;
+		}
+		spin_unlock_irqrestore(&adapter->stats_lock, flags);
+		break;
+	case SIOCSMIIREG:
+		if (!capable(CAP_NET_ADMIN))
+			return -EPERM;
+		if (data->reg_num & ~(0x1F))
+			return -EFAULT;
+		spin_lock_irqsave(&adapter->stats_lock, flags);
+		if (atl2_write_phy_reg(&adapter->hw, data->reg_num,
+			data->val_in)) {
+			spin_unlock_irqrestore(&adapter->stats_lock, flags);
+			return -EIO;
+		}
+		spin_unlock_irqrestore(&adapter->stats_lock, flags);
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+	return 0;
+}
+
+/*
+ * atl2_ioctl -
+ * @netdev:
+ * @ifreq:
+ * @cmd:
+ */
+static int atl2_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
+{
+	switch (cmd) {
+	case SIOCGMIIPHY:
+	case SIOCGMIIREG:
+	case SIOCSMIIREG:
+		return atl2_mii_ioctl(netdev, ifr, cmd);
+#ifdef ETHTOOL_OPS_COMPAT
+	case SIOCETHTOOL:
+		return ethtool_ioctl(ifr);
+#endif
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+/*
+ * atl2_tx_timeout - Respond to a Tx Hang
+ * @netdev: network interface device structure
+ */
+static void atl2_tx_timeout(struct net_device *netdev)
+{
+	struct atl2_adapter *adapter = netdev_priv(netdev);
+
+	/* Do the reset outside of interrupt context */
+	schedule_work(&adapter->reset_task);
+}
+
+/*
+ * atl2_watchdog - Timer Call-back
+ * @data: pointer to netdev cast into an unsigned long
+ */
+static void atl2_watchdog(unsigned long data)
+{
+	struct atl2_adapter *adapter = (struct atl2_adapter *) data;
+	u32 drop_rxd, drop_rxs;
+	unsigned long flags;
+
+	if (!test_bit(__ATL2_DOWN, &adapter->flags)) {
+		spin_lock_irqsave(&adapter->stats_lock, flags);
+		drop_rxd = ATL2_READ_REG(&adapter->hw, REG_STS_RXD_OV);
+		drop_rxs = ATL2_READ_REG(&adapter->hw, REG_STS_RXS_OV);
+		adapter->net_stats.rx_over_errors += (drop_rxd+drop_rxs);
+		spin_unlock_irqrestore(&adapter->stats_lock, flags);
+
+		/* Reset the timer */
+		mod_timer(&adapter->watchdog_timer, jiffies + 4 * HZ);
+	}
+}
+
+/*
+ * atl2_phy_config - Timer Call-back
+ * @data: pointer to netdev cast into an unsigned long
+ */
+static void atl2_phy_config(unsigned long data)
+{
+	struct atl2_adapter *adapter = (struct atl2_adapter *) data;
+	struct atl2_hw *hw = &adapter->hw;
+	unsigned long flags;
+
+	spin_lock_irqsave(&adapter->stats_lock, flags);
+	atl2_write_phy_reg(hw, MII_ADVERTISE, hw->mii_autoneg_adv_reg);
+	atl2_write_phy_reg(hw, MII_BMCR, MII_CR_RESET | MII_CR_AUTO_NEG_EN |
+		MII_CR_RESTART_AUTO_NEG);
+	spin_unlock_irqrestore(&adapter->stats_lock, flags);
+	clear_bit(0, &adapter->cfg_phy);
+}
+
+static int atl2_up(struct atl2_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	int err = 0;
+	u32 val;
+
+	/* hardware has been reset, we need to reload some things */
+
+	err = atl2_init_hw(&adapter->hw);
+	if (err) {
+		err = -EIO;
+		return err;
+	}
+
+	atl2_set_multi(netdev);
+	init_ring_ptrs(adapter);
+
+#ifdef NETIF_F_HW_VLAN_TX
+	atl2_restore_vlan(adapter);
+#endif
+
+	if (atl2_configure(adapter)) {
+		err = -EIO;
+		goto err_up;
+	}
+
+	clear_bit(__ATL2_DOWN, &adapter->flags);
+
+	val = ATL2_READ_REG(&adapter->hw, REG_MASTER_CTRL);
+	ATL2_WRITE_REG(&adapter->hw, REG_MASTER_CTRL, val |
+		MASTER_CTRL_MANUAL_INT);
+
+	atl2_irq_enable(adapter);
+
+err_up:
+	return err;
+}
+
+static void atl2_reinit_locked(struct atl2_adapter *adapter)
+{
+	WARN_ON(in_interrupt());
+	while (test_and_set_bit(__ATL2_RESETTING, &adapter->flags))
+		msleep(1);
+	atl2_down(adapter);
+	atl2_up(adapter);
+	clear_bit(__ATL2_RESETTING, &adapter->flags);
+}
+
+static void atl2_reset_task(struct work_struct *work)
+{
+	struct atl2_adapter *adapter;
+	adapter = container_of(work, struct atl2_adapter, reset_task);
+
+	atl2_reinit_locked(adapter);
+}
+
+static void atl2_setup_mac_ctrl(struct atl2_adapter *adapter)
+{
+	u32 value;
+	struct atl2_hw *hw = &adapter->hw;
+	struct net_device *netdev = adapter->netdev;
+
+	/* Config MAC CTRL Register */
+	value = MAC_CTRL_TX_EN | MAC_CTRL_RX_EN | MAC_CTRL_MACLP_CLK_PHY;
+
+	/* duplex */
+	if (FULL_DUPLEX == adapter->link_duplex)
+		value |= MAC_CTRL_DUPLX;
+
+	/* flow control */
+	value |= (MAC_CTRL_TX_FLOW | MAC_CTRL_RX_FLOW);
+
+	/* PAD & CRC */
+	value |= (MAC_CTRL_ADD_CRC | MAC_CTRL_PAD);
+
+	/* preamble length */
+	value |= (((u32)adapter->hw.preamble_len & MAC_CTRL_PRMLEN_MASK) <<
+		MAC_CTRL_PRMLEN_SHIFT);
+
+	/* vlan */
+	if (adapter->vlgrp)
+		value |= MAC_CTRL_RMV_VLAN;
+
+	/* filter mode */
+	value |= MAC_CTRL_BC_EN;
+	if (netdev->flags & IFF_PROMISC)
+		value |= MAC_CTRL_PROMIS_EN;
+	else if (netdev->flags & IFF_ALLMULTI)
+		value |= MAC_CTRL_MC_ALL_EN;
+
+	/* half retry buffer */
+	value |= (((u32)(adapter->hw.retry_buf &
+		MAC_CTRL_HALF_LEFT_BUF_MASK)) << MAC_CTRL_HALF_LEFT_BUF_SHIFT);
+
+	ATL2_WRITE_REG(hw, REG_MAC_CTRL, value);
+}
+
+static int atl2_check_link(struct atl2_adapter *adapter)
+{
+	struct atl2_hw *hw = &adapter->hw;
+	struct net_device *netdev = adapter->netdev;
+	int ret_val;
+	u16 speed, duplex, phy_data;
+	int reconfig = 0;
+
+	/* MII_BMSR must read twise */
+	atl2_read_phy_reg(hw, MII_BMSR, &phy_data);
+	atl2_read_phy_reg(hw, MII_BMSR, &phy_data);
+	if (!(phy_data&BMSR_LSTATUS)) { /* link down */
+		if (netif_carrier_ok(netdev)) { /* old link state: Up */
+			u32 value;
+			/* disable rx */
+			value = ATL2_READ_REG(hw, REG_MAC_CTRL);
+			value &= ~MAC_CTRL_RX_EN;
+			ATL2_WRITE_REG(hw, REG_MAC_CTRL, value);
+			adapter->link_speed = SPEED_0;
+			netif_carrier_off(netdev);
+			netif_stop_queue(netdev);
+		}
+		return 0;
+	}
+
+	/* Link Up */
+	ret_val = atl2_get_speed_and_duplex(hw, &speed, &duplex);
+	if (ret_val)
+		return ret_val;
+	switch (hw->MediaType) {
+	case MEDIA_TYPE_100M_FULL:
+		if (speed  != SPEED_100 || duplex != FULL_DUPLEX)
+			reconfig = 1;
+		break;
+	case MEDIA_TYPE_100M_HALF:
+		if (speed  != SPEED_100 || duplex != HALF_DUPLEX)
+			reconfig = 1;
+		break;
+	case MEDIA_TYPE_10M_FULL:
+		if (speed != SPEED_10 || duplex != FULL_DUPLEX)
+			reconfig = 1;
+		break;
+	case MEDIA_TYPE_10M_HALF:
+		if (speed  != SPEED_10 || duplex != HALF_DUPLEX)
+			reconfig = 1;
+		break;
+	}
+	/* link result is our setting */
+	if (reconfig == 0) {
+		if (adapter->link_speed != speed ||
+			adapter->link_duplex != duplex) {
+			adapter->link_speed = speed;
+			adapter->link_duplex = duplex;
+			atl2_setup_mac_ctrl(adapter);
+			printk(KERN_INFO "%s: %s NIC Link is Up<%d Mbps %s>\n",
+				atl2_driver_name, netdev->name,
+				adapter->link_speed,
+				adapter->link_duplex == FULL_DUPLEX ?
+					"Full Duplex" : "Half Duplex");
+		}
+
+		if (!netif_carrier_ok(netdev)) { /* Link down -> Up */
+			netif_carrier_on(netdev);
+			netif_wake_queue(netdev);
+		}
+		return 0;
+	}
+
+	/* change original link status */
+	if (netif_carrier_ok(netdev)) {
+		u32 value;
+		/* disable rx */
+		value = ATL2_READ_REG(hw, REG_MAC_CTRL);
+		value &= ~MAC_CTRL_RX_EN;
+		ATL2_WRITE_REG(hw, REG_MAC_CTRL, value);
+
+		adapter->link_speed = SPEED_0;
+		netif_carrier_off(netdev);
+		netif_stop_queue(netdev);
+	}
+
+	/* auto-neg, insert timer to re-config phy
+	 * (if interval smaller than 5 seconds, something strange) */
+	if (!test_bit(__ATL2_DOWN, &adapter->flags)) {
+		if (!test_and_set_bit(0, &adapter->cfg_phy))
+			mod_timer(&adapter->phy_config_timer, jiffies + 5 * HZ);
+	}
+
+	return 0;
+}
+
+/*
+ * atl2_link_chg_task - deal with link change event Out of interrupt context
+ * @netdev: network interface device structure
+ */
+static void atl2_link_chg_task(struct work_struct *work)
+{
+	struct atl2_adapter *adapter;
+	unsigned long flags;
+
+	adapter = container_of(work, struct atl2_adapter, link_chg_task);
+
+	spin_lock_irqsave(&adapter->stats_lock, flags);
+	atl2_check_link(adapter);
+	spin_unlock_irqrestore(&adapter->stats_lock, flags);
+}
+
+static void atl2_setup_pcicmd(struct pci_dev *pdev)
+{
+	u16 cmd;
+
+	pci_read_config_word(pdev, PCI_COMMAND, &cmd);
+
+	if (cmd & PCI_COMMAND_INTX_DISABLE)
+		cmd &= ~PCI_COMMAND_INTX_DISABLE;
+	if (cmd & PCI_COMMAND_IO)
+		cmd &= ~PCI_COMMAND_IO;
+	if (0 == (cmd & PCI_COMMAND_MEMORY))
+		cmd |= PCI_COMMAND_MEMORY;
+	if (0 == (cmd & PCI_COMMAND_MASTER))
+		cmd |= PCI_COMMAND_MASTER;
+	pci_write_config_word(pdev, PCI_COMMAND, cmd);
+
+	/*
+	 * some motherboards BIOS(PXE/EFI) driver may set PME
+	 * while they transfer control to OS (Windows/Linux)
+	 * so we should clear this bit before NIC work normally
+	 */
+	pci_write_config_dword(pdev, REG_PM_CTRLSTAT, 0);
+}
+
+/*
+ * atl2_probe - Device Initialization Routine
+ * @pdev: PCI device information struct
+ * @ent: entry in atl2_pci_tbl
+ *
+ * Returns 0 on success, negative on failure
+ *
+ * atl2_probe initializes an adapter identified by a pci_dev structure.
+ * The OS initialization, configuring of the adapter private structure,
+ * and a hardware reset occur.
+ */
+static int __devinit atl2_probe(struct pci_dev *pdev,
+	const struct pci_device_id *ent)
+{
+	struct net_device *netdev;
+	struct atl2_adapter *adapter;
+	static int cards_found;
+	unsigned long mmio_start;
+	int mmio_len;
+	int err;
+
+	cards_found = 0;
+
+	err = pci_enable_device(pdev);
+	if (err)
+		return err;
+
+	/*
+	 * atl2 is a shared-high-32-bit device, so we're stuck with 32-bit DMA
+	 * until the kernel has the proper infrastructure to support 64-bit DMA
+	 * on these devices.
+	 */
+	if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) &&
+		pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK)) {
+		printk(KERN_ERR "atl2: No usable DMA configuration, aborting\n");
+		goto err_dma;
+	}
+
+	/* Mark all PCI regions associated with PCI device
+	 * pdev as being reserved by owner atl2_driver_name */
+	err = pci_request_regions(pdev, atl2_driver_name);
+	if (err)
+		goto err_pci_reg;
+
+	/* Enables bus-mastering on the device and calls
+	 * pcibios_set_master to do the needed arch specific settings */
+	pci_set_master(pdev);
+
+	err = -ENOMEM;
+	netdev = alloc_etherdev(sizeof(struct atl2_adapter));
+	if (!netdev)
+		goto err_alloc_etherdev;
+
+	SET_NETDEV_DEV(netdev, &pdev->dev);
+
+	pci_set_drvdata(pdev, netdev);
+	adapter = netdev_priv(netdev);
+	adapter->netdev = netdev;
+	adapter->pdev = pdev;
+	adapter->hw.back = adapter;
+
+	mmio_start = pci_resource_start(pdev, 0x0);
+	mmio_len = pci_resource_len(pdev, 0x0);
+
+	adapter->hw.mem_rang = (u32)mmio_len;
+	adapter->hw.hw_addr = ioremap(mmio_start, mmio_len);
+	if (!adapter->hw.hw_addr) {
+		err = -EIO;
+		goto err_ioremap;
+	}
+
+	atl2_setup_pcicmd(pdev);
+
+	netdev->open = &atl2_open;
+	netdev->stop = &atl2_close;
+	netdev->hard_start_xmit = &atl2_xmit_frame;
+	netdev->get_stats = &atl2_get_stats;
+	netdev->set_multicast_list = &atl2_set_multi;
+	netdev->set_mac_address = &atl2_set_mac;
+	netdev->change_mtu = &atl2_change_mtu;
+	netdev->do_ioctl = &atl2_ioctl;
+	atl2_set_ethtool_ops(netdev);
+
+#ifdef HAVE_TX_TIMEOUT
+	netdev->tx_timeout = &atl2_tx_timeout;
+	netdev->watchdog_timeo = 5 * HZ;
+#endif
+#ifdef NETIF_F_HW_VLAN_TX
+	netdev->vlan_rx_register = atl2_vlan_rx_register;
+#endif
+	strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
+
+	netdev->mem_start = mmio_start;
+	netdev->mem_end = mmio_start + mmio_len;
+	adapter->bd_number = cards_found;
+	adapter->pci_using_64 = false;
+
+	/* setup the private structure */
+	err = atl2_sw_init(adapter);
+	if (err)
+		goto err_sw_init;
+
+	err = -EIO;
+
+#ifdef NETIF_F_HW_VLAN_TX
+	netdev->features |= (NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX);
+#endif
+
+#ifdef NETIF_F_LLTX
+	netdev->features |= NETIF_F_LLTX;
+#endif
+
+	/* Init PHY as early as possible due to power saving issue  */
+	atl2_phy_init(&adapter->hw);
+
+	/* reset the controller to
+	 * put the device in a known good starting state */
+
+	if (atl2_reset_hw(&adapter->hw)) {
+		err = -EIO;
+		goto err_reset;
+	}
+
+	/* copy the MAC address out of the EEPROM */
+	atl2_read_mac_addr(&adapter->hw);
+	memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len);
+/* FIXME: do we still need this? */
+#ifdef ETHTOOL_GPERMADDR
+	memcpy(netdev->perm_addr, adapter->hw.mac_addr, netdev->addr_len);
+
+	if (!is_valid_ether_addr(netdev->perm_addr)) {
+#else
+	if (!is_valid_ether_addr(netdev->dev_addr)) {
+#endif
+		err = -EIO;
+		goto err_eeprom;
+	}
+
+	atl2_check_options(adapter);
+
+	init_timer(&adapter->watchdog_timer);
+	adapter->watchdog_timer.function = &atl2_watchdog;
+	adapter->watchdog_timer.data = (unsigned long) adapter;
+
+	init_timer(&adapter->phy_config_timer);
+	adapter->phy_config_timer.function = &atl2_phy_config;
+	adapter->phy_config_timer.data = (unsigned long) adapter;
+
+	INIT_WORK(&adapter->reset_task, atl2_reset_task);
+	INIT_WORK(&adapter->link_chg_task, atl2_link_chg_task);
+
+	strcpy(netdev->name, "eth%d"); /* ?? */
+	err = register_netdev(netdev);
+	if (err)
+		goto err_register;
+
+	/* assume we have no link for now */
+	netif_carrier_off(netdev);
+	netif_stop_queue(netdev);
+
+	cards_found++;
+
+	return 0;
+
+err_reset:
+err_register:
+err_sw_init:
+err_eeprom:
+	iounmap(adapter->hw.hw_addr);
+err_ioremap:
+	free_netdev(netdev);
+err_alloc_etherdev:
+	pci_release_regions(pdev);
+err_pci_reg:
+err_dma:
+	pci_disable_device(pdev);
+	return err;
+}
+
+/*
+ * atl2_remove - Device Removal Routine
+ * @pdev: PCI device information struct
+ *
+ * atl2_remove is called by the PCI subsystem to alert the driver
+ * that it should release a PCI device.  The could be caused by a
+ * Hot-Plug event, or because the driver is going to be removed from
+ * memory.
+ */
+/* FIXME: write the original MAC address back in case it was changed from a
+ * BIOS-set value, as in atl1 -- CHS */
+static void __devexit atl2_remove(struct pci_dev *pdev)
+{
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct atl2_adapter *adapter = netdev_priv(netdev);
+
+	/* flush_scheduled work may reschedule our watchdog task, so
+	 * explicitly disable watchdog tasks from being rescheduled  */
+	set_bit(__ATL2_DOWN, &adapter->flags);
+
+	del_timer_sync(&adapter->watchdog_timer);
+	del_timer_sync(&adapter->phy_config_timer);
+
+	flush_scheduled_work();
+
+	unregister_netdev(netdev);
+
+	atl2_force_ps(&adapter->hw);
+
+	iounmap(adapter->hw.hw_addr);
+	pci_release_regions(pdev);
+
+	free_netdev(netdev);
+
+	pci_disable_device(pdev);
+}
+
+static int atl2_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct atl2_adapter *adapter = netdev_priv(netdev);
+	struct atl2_hw *hw = &adapter->hw;
+	u16 speed, duplex;
+	u32 ctrl = 0;
+	u32 wufc = adapter->wol;
+
+#ifdef CONFIG_PM
+	int retval = 0;
+#endif
+
+	netif_device_detach(netdev);
+
+	if (netif_running(netdev)) {
+		WARN_ON(test_bit(__ATL2_RESETTING, &adapter->flags));
+		atl2_down(adapter);
+	}
+
+#ifdef CONFIG_PM
+	retval = pci_save_state(pdev);
+	if (retval)
+		return retval;
+#endif
+
+	atl2_read_phy_reg(hw, MII_BMSR, (u16 *)&ctrl);
+	atl2_read_phy_reg(hw, MII_BMSR, (u16 *)&ctrl);
+	if (ctrl & BMSR_LSTATUS)
+		wufc &= ~ATLX_WUFC_LNKC;
+
+	if (0 != (ctrl & BMSR_LSTATUS) && 0 != wufc) {
+		u32 ret_val;
+		/* get current link speed & duplex */
+		ret_val = atl2_get_speed_and_duplex(hw, &speed, &duplex);
+		if (ret_val) {
+			printk(KERN_DEBUG
+				"%s: get speed&duplex error while suspend\n",
+				atl2_driver_name);
+			goto wol_dis;
+		}
+
+		ctrl = 0;
+
+		/* turn on magic packet wol */
+		if (wufc & ATLX_WUFC_MAG)
+			ctrl |= (WOL_MAGIC_EN | WOL_MAGIC_PME_EN);
+
+		/* ignore Link Chg event when Link is up */
+		ATL2_WRITE_REG(hw, REG_WOL_CTRL, ctrl);
+
+		/* Config MAC CTRL Register */
+		ctrl = MAC_CTRL_RX_EN | MAC_CTRL_MACLP_CLK_PHY;
+		if (FULL_DUPLEX == adapter->link_duplex)
+			ctrl |= MAC_CTRL_DUPLX;
+		ctrl |= (MAC_CTRL_ADD_CRC | MAC_CTRL_PAD);
+		ctrl |= (((u32)adapter->hw.preamble_len &
+			MAC_CTRL_PRMLEN_MASK) << MAC_CTRL_PRMLEN_SHIFT);
+		ctrl |= (((u32)(adapter->hw.retry_buf &
+			MAC_CTRL_HALF_LEFT_BUF_MASK)) <<
+			MAC_CTRL_HALF_LEFT_BUF_SHIFT);
+		if (wufc & ATLX_WUFC_MAG) {
+			/* magic packet maybe Broadcast&multicast&Unicast */
+			ctrl |= MAC_CTRL_BC_EN;
+		}
+
+		ATL2_WRITE_REG(hw, REG_MAC_CTRL, ctrl);
+
+		/* pcie patch */
+		ctrl = ATL2_READ_REG(hw, REG_PCIE_PHYMISC);
+		ctrl |= PCIE_PHYMISC_FORCE_RCV_DET;
+		ATL2_WRITE_REG(hw, REG_PCIE_PHYMISC, ctrl);
+		ctrl = ATL2_READ_REG(hw, REG_PCIE_DLL_TX_CTRL1);
+		ctrl |= PCIE_DLL_TX_CTRL1_SEL_NOR_CLK;
+		ATL2_WRITE_REG(hw, REG_PCIE_DLL_TX_CTRL1, ctrl);
+
+		pci_enable_wake(pdev, pci_choose_state(pdev, state), 1);
+		goto suspend_exit;
+	}
+
+	if (0 == (ctrl&BMSR_LSTATUS) && 0 != (wufc&ATLX_WUFC_LNKC)) {
+		/* link is down, so only LINK CHG WOL event enable */
+		ctrl |= (WOL_LINK_CHG_EN | WOL_LINK_CHG_PME_EN);
+		ATL2_WRITE_REG(hw, REG_WOL_CTRL, ctrl);
+		ATL2_WRITE_REG(hw, REG_MAC_CTRL, 0);
+
+		/* pcie patch */
+		ctrl = ATL2_READ_REG(hw, REG_PCIE_PHYMISC);
+		ctrl |= PCIE_PHYMISC_FORCE_RCV_DET;
+		ATL2_WRITE_REG(hw, REG_PCIE_PHYMISC, ctrl);
+		ctrl = ATL2_READ_REG(hw, REG_PCIE_DLL_TX_CTRL1);
+		ctrl |= PCIE_DLL_TX_CTRL1_SEL_NOR_CLK;
+		ATL2_WRITE_REG(hw, REG_PCIE_DLL_TX_CTRL1, ctrl);
+
+		hw->phy_configured = false; /* re-init PHY when resume */
+
+		pci_enable_wake(pdev, pci_choose_state(pdev, state), 1);
+
+		goto suspend_exit;
+	}
+
+wol_dis:
+	/* WOL disabled */
+	ATL2_WRITE_REG(hw, REG_WOL_CTRL, 0);
+
+	/* pcie patch */
+	ctrl = ATL2_READ_REG(hw, REG_PCIE_PHYMISC);
+	ctrl |= PCIE_PHYMISC_FORCE_RCV_DET;
+	ATL2_WRITE_REG(hw, REG_PCIE_PHYMISC, ctrl);
+	ctrl = ATL2_READ_REG(hw, REG_PCIE_DLL_TX_CTRL1);
+	ctrl |= PCIE_DLL_TX_CTRL1_SEL_NOR_CLK;
+	ATL2_WRITE_REG(hw, REG_PCIE_DLL_TX_CTRL1, ctrl);
+
+	atl2_force_ps(hw);
+	hw->phy_configured = false; /* re-init PHY when resume */
+
+	pci_enable_wake(pdev, pci_choose_state(pdev, state), 0);
+
+suspend_exit:
+	if (netif_running(netdev))
+		atl2_free_irq(adapter);
+
+	pci_disable_device(pdev);
+
+	pci_set_power_state(pdev, pci_choose_state(pdev, state));
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int atl2_resume(struct pci_dev *pdev)
+{
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct atl2_adapter *adapter = netdev_priv(netdev);
+	u32 err;
+
+	pci_set_power_state(pdev, PCI_D0);
+	pci_restore_state(pdev);
+
+	err = pci_enable_device(pdev);
+	if (err) {
+		printk(KERN_ERR
+			"atl2: Cannot enable PCI device from suspend\n");
+		return err;
+	}
+
+	pci_set_master(pdev);
+
+	ATL2_READ_REG(&adapter->hw, REG_WOL_CTRL); /* clear WOL status */
+
+	pci_enable_wake(pdev, PCI_D3hot, 0);
+	pci_enable_wake(pdev, PCI_D3cold, 0);
+
+	ATL2_WRITE_REG(&adapter->hw, REG_WOL_CTRL, 0);
+
+	err = atl2_request_irq(adapter);
+	if (netif_running(netdev) && err)
+		return err;
+
+	atl2_reset_hw(&adapter->hw);
+
+	if (netif_running(netdev))
+		atl2_up(adapter);
+
+	netif_device_attach(netdev);
+
+	return 0;
+}
+#endif
+
+static void atl2_shutdown(struct pci_dev *pdev)
+{
+	atl2_suspend(pdev, PMSG_SUSPEND);
+}
+
+static struct pci_driver atl2_driver = {
+	.name     = atl2_driver_name,
+	.id_table = atl2_pci_tbl,
+	.probe    = atl2_probe,
+	.remove   = __devexit_p(atl2_remove),
+	/* Power Managment Hooks */
+	.suspend  = atl2_suspend,
+#ifdef CONFIG_PM
+	.resume   = atl2_resume,
+#endif
+	.shutdown = atl2_shutdown,
+};
+
+/*
+ * atl2_init_module - Driver Registration Routine
+ *
+ * atl2_init_module is the first routine called when the driver is
+ * loaded. All it does is register with the PCI subsystem.
+ */
+static int __init atl2_init_module(void)
+{
+	printk(KERN_INFO "%s - version %s\n", atl2_driver_string,
+		atl2_driver_version);
+	printk(KERN_INFO "%s\n", atl2_copyright);
+	return pci_register_driver(&atl2_driver);
+}
+module_init(atl2_init_module);
+
+/*
+ * atl2_exit_module - Driver Exit Cleanup Routine
+ *
+ * atl2_exit_module is called just before the driver is removed
+ * from memory.
+ */
+static void __exit atl2_exit_module(void)
+{
+	pci_unregister_driver(&atl2_driver);
+}
+module_exit(atl2_exit_module);
+
+static void atl2_read_pci_cfg(struct atl2_hw *hw, u32 reg, u16 *value)
+{
+	struct atl2_adapter *adapter = hw->back;
+	pci_read_config_word(adapter->pdev, reg, value);
+}
+
+static void atl2_write_pci_cfg(struct atl2_hw *hw, u32 reg, u16 *value)
+{
+	struct atl2_adapter *adapter = hw->back;
+	pci_write_config_word(adapter->pdev, reg, *value);
+}
+
+static int atl2_get_settings(struct net_device *netdev,
+	struct ethtool_cmd *ecmd)
+{
+	struct atl2_adapter *adapter = netdev_priv(netdev);
+	struct atl2_hw *hw = &adapter->hw;
+
+	ecmd->supported = (SUPPORTED_10baseT_Half |
+		SUPPORTED_10baseT_Full |
+		SUPPORTED_100baseT_Half |
+		SUPPORTED_100baseT_Full |
+		SUPPORTED_Autoneg |
+		SUPPORTED_TP);
+	ecmd->advertising = ADVERTISED_TP;
+
+	ecmd->advertising |= ADVERTISED_Autoneg;
+	ecmd->advertising |= hw->autoneg_advertised;
+
+	ecmd->port = PORT_TP;
+	ecmd->phy_address = 0;
+	ecmd->transceiver = XCVR_INTERNAL;
+
+	if (adapter->link_speed != SPEED_0) {
+		ecmd->speed = adapter->link_speed;
+		if (adapter->link_duplex == FULL_DUPLEX)
+			ecmd->duplex = DUPLEX_FULL;
+		else
+			ecmd->duplex = DUPLEX_HALF;
+	} else {
+		ecmd->speed = -1;
+		ecmd->duplex = -1;
+	}
+
+	ecmd->autoneg = AUTONEG_ENABLE;
+	return 0;
+}
+
+static int atl2_set_settings(struct net_device *netdev,
+	struct ethtool_cmd *ecmd)
+{
+	struct atl2_adapter *adapter = netdev_priv(netdev);
+	struct atl2_hw *hw = &adapter->hw;
+
+	while (test_and_set_bit(__ATL2_RESETTING, &adapter->flags))
+		msleep(1);
+
+	if (ecmd->autoneg == AUTONEG_ENABLE) {
+#define MY_ADV_MASK	(ADVERTISE_10_HALF | \
+			 ADVERTISE_10_FULL | \
+			 ADVERTISE_100_HALF| \
+			 ADVERTISE_100_FULL)
+
+		if ((ecmd->advertising & MY_ADV_MASK) == MY_ADV_MASK) {
+			hw->MediaType = MEDIA_TYPE_AUTO_SENSOR;
+			hw->autoneg_advertised =  MY_ADV_MASK;
+		} else if ((ecmd->advertising & MY_ADV_MASK) ==
+				ADVERTISE_100_FULL) {
+			hw->MediaType = MEDIA_TYPE_100M_FULL;
+			hw->autoneg_advertised = ADVERTISE_100_FULL;
+		} else if ((ecmd->advertising & MY_ADV_MASK) ==
+				ADVERTISE_100_HALF) {
+			hw->MediaType = MEDIA_TYPE_100M_HALF;
+			hw->autoneg_advertised = ADVERTISE_100_HALF;
+		} else if ((ecmd->advertising & MY_ADV_MASK) ==
+				ADVERTISE_10_FULL) {
+			hw->MediaType = MEDIA_TYPE_10M_FULL;
+			hw->autoneg_advertised = ADVERTISE_10_FULL;
+		}  else if ((ecmd->advertising & MY_ADV_MASK) ==
+				ADVERTISE_10_HALF) {
+			hw->MediaType = MEDIA_TYPE_10M_HALF;
+			hw->autoneg_advertised = ADVERTISE_10_HALF;
+		} else {
+			clear_bit(__ATL2_RESETTING, &adapter->flags);
+			return -EINVAL;
+		}
+		ecmd->advertising = hw->autoneg_advertised |
+			ADVERTISED_TP | ADVERTISED_Autoneg;
+	} else {
+		clear_bit(__ATL2_RESETTING, &adapter->flags);
+		return -EINVAL;
+	}
+
+	/* reset the link */
+	if (netif_running(adapter->netdev)) {
+		atl2_down(adapter);
+		atl2_up(adapter);
+	} else
+		atl2_reset_hw(&adapter->hw);
+
+	clear_bit(__ATL2_RESETTING, &adapter->flags);
+	return 0;
+}
+
+static u32 atl2_get_tx_csum(struct net_device *netdev)
+{
+	return (netdev->features & NETIF_F_HW_CSUM) != 0;
+}
+
+static u32 atl2_get_msglevel(struct net_device *netdev)
+{
+	return 0;
+}
+
+/*
+ * It's sane for this to be empty, but we might want to take advantage of this.
+ */
+static void atl2_set_msglevel(struct net_device *netdev, u32 data)
+{
+}
+
+static int atl2_get_regs_len(struct net_device *netdev)
+{
+#define ATL2_REGS_LEN 42
+	return sizeof(u32) * ATL2_REGS_LEN;
+}
+
+static void atl2_get_regs(struct net_device *netdev,
+	struct ethtool_regs *regs, void *p)
+{
+	struct atl2_adapter *adapter = netdev_priv(netdev);
+	struct atl2_hw *hw = &adapter->hw;
+	u32 *regs_buff = p;
+	u16 phy_data;
+
+	memset(p, 0, sizeof(u32) * ATL2_REGS_LEN);
+
+	regs->version = (1 << 24) | (hw->revision_id << 16) | hw->device_id;
+
+	regs_buff[0]  = ATL2_READ_REG(hw, REG_VPD_CAP);
+	regs_buff[1]  = ATL2_READ_REG(hw, REG_SPI_FLASH_CTRL);
+	regs_buff[2]  = ATL2_READ_REG(hw, REG_SPI_FLASH_CONFIG);
+	regs_buff[3]  = ATL2_READ_REG(hw, REG_TWSI_CTRL);
+	regs_buff[4]  = ATL2_READ_REG(hw, REG_PCIE_DEV_MISC_CTRL);
+	regs_buff[5]  = ATL2_READ_REG(hw, REG_MASTER_CTRL);
+	regs_buff[6]  = ATL2_READ_REG(hw, REG_MANUAL_TIMER_INIT);
+	regs_buff[7]  = ATL2_READ_REG(hw, REG_IRQ_MODU_TIMER_INIT);
+	regs_buff[8]  = ATL2_READ_REG(hw, REG_PHY_ENABLE);
+	regs_buff[9]  = ATL2_READ_REG(hw, REG_CMBDISDMA_TIMER);
+	regs_buff[10] = ATL2_READ_REG(hw, REG_IDLE_STATUS);
+	regs_buff[11] = ATL2_READ_REG(hw, REG_MDIO_CTRL);
+	regs_buff[12] = ATL2_READ_REG(hw, REG_SERDES_LOCK);
+	regs_buff[13] = ATL2_READ_REG(hw, REG_MAC_CTRL);
+	regs_buff[14] = ATL2_READ_REG(hw, REG_MAC_IPG_IFG);
+	regs_buff[15] = ATL2_READ_REG(hw, REG_MAC_STA_ADDR);
+	regs_buff[16] = ATL2_READ_REG(hw, REG_MAC_STA_ADDR+4);
+	regs_buff[17] = ATL2_READ_REG(hw, REG_RX_HASH_TABLE);
+	regs_buff[18] = ATL2_READ_REG(hw, REG_RX_HASH_TABLE+4);
+	regs_buff[19] = ATL2_READ_REG(hw, REG_MAC_HALF_DUPLX_CTRL);
+	regs_buff[20] = ATL2_READ_REG(hw, REG_MTU);
+	regs_buff[21] = ATL2_READ_REG(hw, REG_WOL_CTRL);
+	regs_buff[22] = ATL2_READ_REG(hw, REG_SRAM_TXRAM_END);
+	regs_buff[23] = ATL2_READ_REG(hw, REG_DESC_BASE_ADDR_HI);
+	regs_buff[24] = ATL2_READ_REG(hw, REG_TXD_BASE_ADDR_LO);
+	regs_buff[25] = ATL2_READ_REG(hw, REG_TXD_MEM_SIZE);
+	regs_buff[26] = ATL2_READ_REG(hw, REG_TXS_BASE_ADDR_LO);
+	regs_buff[27] = ATL2_READ_REG(hw, REG_TXS_MEM_SIZE);
+	regs_buff[28] = ATL2_READ_REG(hw, REG_RXD_BASE_ADDR_LO);
+	regs_buff[29] = ATL2_READ_REG(hw, REG_RXD_BUF_NUM);
+	regs_buff[30] = ATL2_READ_REG(hw, REG_DMAR);
+	regs_buff[31] = ATL2_READ_REG(hw, REG_TX_CUT_THRESH);
+	regs_buff[32] = ATL2_READ_REG(hw, REG_DMAW);
+	regs_buff[33] = ATL2_READ_REG(hw, REG_PAUSE_ON_TH);
+	regs_buff[34] = ATL2_READ_REG(hw, REG_PAUSE_OFF_TH);
+	regs_buff[35] = ATL2_READ_REG(hw, REG_MB_TXD_WR_IDX);
+	regs_buff[36] = ATL2_READ_REG(hw, REG_MB_RXD_RD_IDX);
+	regs_buff[38] = ATL2_READ_REG(hw, REG_ISR);
+	regs_buff[39] = ATL2_READ_REG(hw, REG_IMR);
+
+	atl2_read_phy_reg(hw, MII_BMCR, &phy_data);
+	regs_buff[40] = (u32)phy_data;
+	atl2_read_phy_reg(hw, MII_BMSR, &phy_data);
+	regs_buff[41] = (u32)phy_data;
+}
+
+static int atl2_get_eeprom_len(struct net_device *netdev)
+{
+	struct atl2_adapter *adapter = netdev_priv(netdev);
+
+	if (!atl2_check_eeprom_exist(&adapter->hw))
+		return 512;
+	else
+		return 0;
+}
+
+static int atl2_get_eeprom(struct net_device *netdev,
+	struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+	struct atl2_adapter *adapter = netdev_priv(netdev);
+	struct atl2_hw *hw = &adapter->hw;
+	u32 *eeprom_buff;
+	int first_dword, last_dword;
+	int ret_val = 0;
+	int i;
+
+	if (eeprom->len == 0)
+		return -EINVAL;
+
+	if (atl2_check_eeprom_exist(hw))
+		return -EINVAL;
+
+	eeprom->magic = hw->vendor_id | (hw->device_id << 16);
+
+	first_dword = eeprom->offset >> 2;
+	last_dword = (eeprom->offset + eeprom->len - 1) >> 2;
+
+	eeprom_buff = kmalloc(sizeof(u32) * (last_dword - first_dword + 1),
+		GFP_KERNEL);
+	if (!eeprom_buff)
+		return -ENOMEM;
+
+	for (i = first_dword; i < last_dword; i++) {
+		if (!atl2_read_eeprom(hw, i*4, &(eeprom_buff[i-first_dword])))
+			return -EIO;
+	}
+
+	memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 3),
+		eeprom->len);
+	kfree(eeprom_buff);
+
+	return ret_val;
+}
+
+static int atl2_set_eeprom(struct net_device *netdev,
+	struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+	struct atl2_adapter *adapter = netdev_priv(netdev);
+	struct atl2_hw *hw = &adapter->hw;
+	u32 *eeprom_buff;
+	u32 *ptr;
+	int max_len, first_dword, last_dword, ret_val = 0;
+	int i;
+
+	if (eeprom->len == 0)
+		return -EOPNOTSUPP;
+
+	if (eeprom->magic != (hw->vendor_id | (hw->device_id << 16)))
+		return -EFAULT;
+
+	max_len = 512;
+
+	first_dword = eeprom->offset >> 2;
+	last_dword = (eeprom->offset + eeprom->len - 1) >> 2;
+	eeprom_buff = kmalloc(max_len, GFP_KERNEL);
+	if (!eeprom_buff)
+		return -ENOMEM;
+
+	ptr = (u32 *)eeprom_buff;
+
+	if (eeprom->offset & 3) {
+		/* need read/modify/write of first changed EEPROM word */
+		/* only the second byte of the word is being modified */
+		if (!atl2_read_eeprom(hw, first_dword*4, &(eeprom_buff[0])))
+			return -EIO;
+		ptr++;
+	}
+	if (((eeprom->offset + eeprom->len) & 3)) {
+		/*
+		 * need read/modify/write of last changed EEPROM word
+		 * only the first byte of the word is being modified
+		 */
+		if (!atl2_read_eeprom(hw, last_dword * 4,
+			&(eeprom_buff[last_dword - first_dword])))
+			return -EIO;
+	}
+
+	/* Device's eeprom is always little-endian, word addressable */
+	memcpy(ptr, bytes, eeprom->len);
+
+	for (i = 0; i < last_dword - first_dword + 1; i++) {
+		if (!atl2_write_eeprom(hw, ((first_dword+i)*4), eeprom_buff[i]))
+			return -EIO;
+	}
+
+	kfree(eeprom_buff);
+	return ret_val;
+}
+
+static void atl2_get_drvinfo(struct net_device *netdev,
+	struct ethtool_drvinfo *drvinfo)
+{
+	struct atl2_adapter *adapter = netdev_priv(netdev);
+
+	strncpy(drvinfo->driver,  atl2_driver_name, 32);
+	strncpy(drvinfo->version, atl2_driver_version, 32);
+	strncpy(drvinfo->fw_version, "L2", 32);
+	strncpy(drvinfo->bus_info, pci_name(adapter->pdev), 32);
+	drvinfo->n_stats = 0;
+	drvinfo->testinfo_len = 0;
+	drvinfo->regdump_len = atl2_get_regs_len(netdev);
+	drvinfo->eedump_len = atl2_get_eeprom_len(netdev);
+}
+
+static void atl2_get_wol(struct net_device *netdev,
+	struct ethtool_wolinfo *wol)
+{
+	struct atl2_adapter *adapter = netdev_priv(netdev);
+
+	wol->supported = WAKE_MAGIC;
+	wol->wolopts = 0;
+
+	if (adapter->wol & ATLX_WUFC_EX)
+		wol->wolopts |= WAKE_UCAST;
+	if (adapter->wol & ATLX_WUFC_MC)
+		wol->wolopts |= WAKE_MCAST;
+	if (adapter->wol & ATLX_WUFC_BC)
+		wol->wolopts |= WAKE_BCAST;
+	if (adapter->wol & ATLX_WUFC_MAG)
+		wol->wolopts |= WAKE_MAGIC;
+	if (adapter->wol & ATLX_WUFC_LNKC)
+		wol->wolopts |= WAKE_PHY;
+}
+
+static int atl2_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
+{
+	struct atl2_adapter *adapter = netdev_priv(netdev);
+
+	if (wol->wolopts & (WAKE_ARP | WAKE_MAGICSECURE))
+		return -EOPNOTSUPP;
+
+	if (wol->wolopts & (WAKE_MCAST|WAKE_BCAST|WAKE_MCAST))
+		return -EOPNOTSUPP;
+
+	/* these settings will always override what we currently have */
+	adapter->wol = 0;
+
+	if (wol->wolopts & WAKE_MAGIC)
+		adapter->wol |= ATLX_WUFC_MAG;
+	if (wol->wolopts & WAKE_PHY)
+		adapter->wol |= ATLX_WUFC_LNKC;
+
+	return 0;
+}
+
+static int atl2_nway_reset(struct net_device *netdev)
+{
+	struct atl2_adapter *adapter = netdev_priv(netdev);
+	if (netif_running(netdev))
+		atl2_reinit_locked(adapter);
+	return 0;
+}
+
+static struct ethtool_ops atl2_ethtool_ops = {
+	.get_settings		= atl2_get_settings,
+	.set_settings		= atl2_set_settings,
+	.get_drvinfo		= atl2_get_drvinfo,
+	.get_regs_len		= atl2_get_regs_len,
+	.get_regs		= atl2_get_regs,
+	.get_wol		= atl2_get_wol,
+	.set_wol		= atl2_set_wol,
+	.get_msglevel		= atl2_get_msglevel,
+	.set_msglevel		= atl2_set_msglevel,
+	.nway_reset		= atl2_nway_reset,
+	.get_link		= ethtool_op_get_link,
+	.get_eeprom_len		= atl2_get_eeprom_len,
+	.get_eeprom		= atl2_get_eeprom,
+	.set_eeprom		= atl2_set_eeprom,
+	.get_tx_csum		= atl2_get_tx_csum,
+	.get_sg			= ethtool_op_get_sg,
+	.set_sg			= ethtool_op_set_sg,
+#ifdef NETIF_F_TSO
+	.get_tso		= ethtool_op_get_tso,
+#endif
+};
+
+static void atl2_set_ethtool_ops(struct net_device *netdev)
+{
+	SET_ETHTOOL_OPS(netdev, &atl2_ethtool_ops);
+}
+
+#define LBYTESWAP(a)  ((((a) & 0x00ff00ff) << 8) | \
+	(((a) & 0xff00ff00) >> 8))
+#define LONGSWAP(a)   ((LBYTESWAP(a) << 16) | (LBYTESWAP(a) >> 16))
+#define SHORTSWAP(a)  (((a) << 8) | ((a) >> 8))
+
+/*
+ * Reset the transmit and receive units; mask and clear all interrupts.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * return : 0  or  idle status (if error)
+ */
+static s32 atl2_reset_hw(struct atl2_hw *hw)
+{
+	u32 icr;
+	u16 pci_cfg_cmd_word;
+	int i;
+
+	/* Workaround for PCI problem when BIOS sets MMRBC incorrectly. */
+	atl2_read_pci_cfg(hw, PCI_REG_COMMAND, &pci_cfg_cmd_word);
+	if ((pci_cfg_cmd_word &
+		(CMD_IO_SPACE|CMD_MEMORY_SPACE|CMD_BUS_MASTER)) !=
+		(CMD_IO_SPACE|CMD_MEMORY_SPACE|CMD_BUS_MASTER)) {
+		pci_cfg_cmd_word |=
+			(CMD_IO_SPACE|CMD_MEMORY_SPACE|CMD_BUS_MASTER);
+		atl2_write_pci_cfg(hw, PCI_REG_COMMAND, &pci_cfg_cmd_word);
+	}
+
+	/* Clear Interrupt mask to stop board from generating
+	 * interrupts & Clear any pending interrupt events
+	 */
+	/* FIXME */
+	/* ATL2_WRITE_REG(hw, REG_IMR, 0); */
+	/* ATL2_WRITE_REG(hw, REG_ISR, 0xffffffff); */
+
+	/* Issue Soft Reset to the MAC.  This will reset the chip's
+	 * transmit, receive, DMA.  It will not effect
+	 * the current PCI configuration.  The global reset bit is self-
+	 * clearing, and should clear within a microsecond.
+	 */
+	ATL2_WRITE_REG(hw, REG_MASTER_CTRL, MASTER_CTRL_SOFT_RST);
+	wmb();
+	msleep(1); /* delay about 1ms */
+
+	/* Wait at least 10ms for All module to be Idle */
+	for (i = 0; i < 10; i++) {
+		icr = ATL2_READ_REG(hw, REG_IDLE_STATUS);
+		if (!icr)
+			break;
+		msleep(1); /* delay 1 ms */
+		cpu_relax();
+	}
+
+	if (icr)
+		return icr;
+
+	return 0;
+}
+
+#define CUSTOM_SPI_CS_SETUP        2
+#define CUSTOM_SPI_CLK_HI          2
+#define CUSTOM_SPI_CLK_LO          2
+#define CUSTOM_SPI_CS_HOLD         2
+#define CUSTOM_SPI_CS_HI           3
+
+static struct atl2_spi_flash_dev flash_table[] =
+{
+/* MFR    WRSR  READ  PROGRAM WREN  WRDI  RDSR  RDID  SECTOR_ERASE CHIP_ERASE */
+{"Atmel", 0x0,  0x03, 0x02,   0x06, 0x04, 0x05, 0x15, 0x52,        0x62 },
+{"SST",   0x01, 0x03, 0x02,   0x06, 0x04, 0x05, 0x90, 0x20,        0x60 },
+{"ST",    0x01, 0x03, 0x02,   0x06, 0x04, 0x05, 0xAB, 0xD8,        0xC7 },
+};
+
+static bool atl2_spi_read(struct atl2_hw *hw, u32 addr, u32 *buf)
+{
+	int i;
+	u32 value;
+
+	ATL2_WRITE_REG(hw, REG_SPI_DATA, 0);
+	ATL2_WRITE_REG(hw, REG_SPI_ADDR, addr);
+
+	value = SPI_FLASH_CTRL_WAIT_READY |
+		(CUSTOM_SPI_CS_SETUP & SPI_FLASH_CTRL_CS_SETUP_MASK) <<
+			SPI_FLASH_CTRL_CS_SETUP_SHIFT |
+		(CUSTOM_SPI_CLK_HI & SPI_FLASH_CTRL_CLK_HI_MASK) <<
+			SPI_FLASH_CTRL_CLK_HI_SHIFT |
+		(CUSTOM_SPI_CLK_LO & SPI_FLASH_CTRL_CLK_LO_MASK) <<
+			SPI_FLASH_CTRL_CLK_LO_SHIFT |
+		(CUSTOM_SPI_CS_HOLD & SPI_FLASH_CTRL_CS_HOLD_MASK) <<
+			SPI_FLASH_CTRL_CS_HOLD_SHIFT |
+		(CUSTOM_SPI_CS_HI & SPI_FLASH_CTRL_CS_HI_MASK) <<
+			SPI_FLASH_CTRL_CS_HI_SHIFT |
+		(0x1 & SPI_FLASH_CTRL_INS_MASK) << SPI_FLASH_CTRL_INS_SHIFT;
+
+	ATL2_WRITE_REG(hw, REG_SPI_FLASH_CTRL, value);
+
+	value |= SPI_FLASH_CTRL_START;
+
+	ATL2_WRITE_REG(hw, REG_SPI_FLASH_CTRL, value);
+
+	for (i = 0; i < 10; i++) {
+		msleep(1);
+		value = ATL2_READ_REG(hw, REG_SPI_FLASH_CTRL);
+		if (!(value & SPI_FLASH_CTRL_START))
+			break;
+	}
+
+	if (value & SPI_FLASH_CTRL_START)
+		return false;
+
+	*buf = ATL2_READ_REG(hw, REG_SPI_DATA);
+
+	return true;
+}
+
+/*
+ * get_permanent_address
+ * return 0 if get valid mac address,
+ */
+static int get_permanent_address(struct atl2_hw *hw)
+{
+	u32 Addr[2];
+	u32 i, Control;
+	u16 Register;
+	u8  EthAddr[NODE_ADDRESS_SIZE];
+	bool KeyValid;
+
+	if (is_valid_ether_addr(hw->perm_mac_addr))
+		return 0;
+
+	Addr[0] = 0;
+	Addr[1] = 0;
+
+	if (!atl2_check_eeprom_exist(hw)) { /* eeprom exists */
+		Register = 0;
+		KeyValid = false;
+
+		/* Read out all EEPROM content */
+		i = 0;
+		while (1) {
+			if (atl2_read_eeprom(hw, i + 0x100, &Control)) {
+				if (KeyValid) {
+					if (Register == REG_MAC_STA_ADDR)
+						Addr[0] = Control;
+					else if (Register ==
+						(REG_MAC_STA_ADDR + 4))
+						Addr[1] = Control;
+					KeyValid = false;
+				} else if ((Control & 0xff) == 0x5A) {
+					KeyValid = true;
+					Register = (u16) (Control >> 16);
+				} else {
+			/* assume data end while encount an invalid KEYWORD */
+					break;
+				}
+			} else {
+				break; /* read error */
+			}
+			i += 4;
+		}
+
+		*(u32 *) &EthAddr[2] = LONGSWAP(Addr[0]);
+		*(u16 *) &EthAddr[0] = SHORTSWAP(*(u16 *) &Addr[1]);
+
+		if (is_valid_ether_addr(EthAddr)) {
+			memcpy(hw->perm_mac_addr, EthAddr, NODE_ADDRESS_SIZE);
+			return 0;
+		}
+		return 1;
+	}
+
+	/* see if SPI flash exists? */
+	Addr[0] = 0;
+	Addr[1] = 0;
+	Register = 0;
+	KeyValid = false;
+	i = 0;
+	while (1) {
+		if (atl2_spi_read(hw, i + 0x1f000, &Control)) {
+			if (KeyValid) {
+				if (Register == REG_MAC_STA_ADDR)
+					Addr[0] = Control;
+				else if (Register == (REG_MAC_STA_ADDR + 4))
+					Addr[1] = Control;
+				KeyValid = false;
+			} else if ((Control & 0xff) == 0x5A) {
+				KeyValid = true;
+				Register = (u16) (Control >> 16);
+			} else {
+				break; /* data end */
+			}
+		} else {
+			break; /* read error */
+		}
+		i += 4;
+	}
+
+	*(u32 *) &EthAddr[2] = LONGSWAP(Addr[0]);
+	*(u16 *) &EthAddr[0] = SHORTSWAP(*(u16 *)&Addr[1]);
+	if (is_valid_ether_addr(EthAddr)) {
+		memcpy(hw->perm_mac_addr, EthAddr, NODE_ADDRESS_SIZE);
+		return 0;
+	}
+	/* maybe MAC-address is from BIOS */
+	Addr[0] = ATL2_READ_REG(hw, REG_MAC_STA_ADDR);
+	Addr[1] = ATL2_READ_REG(hw, REG_MAC_STA_ADDR + 4);
+	*(u32 *) &EthAddr[2] = LONGSWAP(Addr[0]);
+	*(u16 *) &EthAddr[0] = SHORTSWAP(*(u16 *) &Addr[1]);
+
+	if (is_valid_ether_addr(EthAddr)) {
+		memcpy(hw->perm_mac_addr, EthAddr, NODE_ADDRESS_SIZE);
+		return 0;
+	}
+
+	return 1;
+}
+
+/*
+ * Reads the adapter's MAC address from the EEPROM
+ *
+ * hw - Struct containing variables accessed by shared code
+ */
+static s32 atl2_read_mac_addr(struct atl2_hw *hw)
+{
+	u16 i;
+
+	if (get_permanent_address(hw)) {
+		/* for test */
+		/* FIXME: shouldn't we use random_ether_addr() here? */
+		hw->perm_mac_addr[0] = 0x00;
+		hw->perm_mac_addr[1] = 0x13;
+		hw->perm_mac_addr[2] = 0x74;
+		hw->perm_mac_addr[3] = 0x00;
+		hw->perm_mac_addr[4] = 0x5c;
+		hw->perm_mac_addr[5] = 0x38;
+	}
+
+	for (i = 0; i < NODE_ADDRESS_SIZE; i++)
+		hw->mac_addr[i] = hw->perm_mac_addr[i];
+
+	return 0;
+}
+
+/*
+ * Hashes an address to determine its location in the multicast table
+ *
+ * hw - Struct containing variables accessed by shared code
+ * mc_addr - the multicast address to hash
+ *
+ * atl2_hash_mc_addr
+ *  purpose
+ *      set hash value for a multicast address
+ *      hash calcu processing :
+ *          1. calcu 32bit CRC for multicast address
+ *          2. reverse crc with MSB to LSB
+ */
+static u32 atl2_hash_mc_addr(struct atl2_hw *hw, u8 *mc_addr)
+{
+	u32 crc32, value;
+	int i;
+
+	value = 0;
+	crc32 = ether_crc_le(6, mc_addr);
+
+	for (i = 0; i < 32; i++)
+		value |= (((crc32 >> i) & 1) << (31 - i));
+
+	return value;
+}
+
+/*
+ * Sets the bit in the multicast table corresponding to the hash value.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * hash_value - Multicast address hash value
+ */
+static void atl2_hash_set(struct atl2_hw *hw, u32 hash_value)
+{
+	u32 hash_bit, hash_reg;
+	u32 mta;
+
+	/* The HASH Table  is a register array of 2 32-bit registers.
+	 * It is treated like an array of 64 bits.  We want to set
+	 * bit BitArray[hash_value]. So we figure out what register
+	 * the bit is in, read it, OR in the new bit, then write
+	 * back the new value.  The register is determined by the
+	 * upper 7 bits of the hash value and the bit within that
+	 * register are determined by the lower 5 bits of the value.
+	 */
+	hash_reg = (hash_value >> 31) & 0x1;
+	hash_bit = (hash_value >> 26) & 0x1F;
+
+	mta = ATL2_READ_REG_ARRAY(hw, REG_RX_HASH_TABLE, hash_reg);
+
+	mta |= (1 << hash_bit);
+
+	ATL2_WRITE_REG_ARRAY(hw, REG_RX_HASH_TABLE, hash_reg, mta);
+}
+
+/*
+ * atl2_init_pcie - init PCIE module
+ */
+static void atl2_init_pcie(struct atl2_hw *hw)
+{
+    u32 value;
+    value = LTSSM_TEST_MODE_DEF;
+    ATL2_WRITE_REG(hw, REG_LTSSM_TEST_MODE, value);
+
+    value = PCIE_DLL_TX_CTRL1_DEF;
+    ATL2_WRITE_REG(hw, REG_PCIE_DLL_TX_CTRL1, value);
+}
+
+static void atl2_init_flash_opcode(struct atl2_hw *hw)
+{
+	if (hw->flash_vendor >= ARRAY_SIZE(flash_table))
+		hw->flash_vendor = 0; /* ATMEL */
+
+	/* Init OP table */
+	ATL2_WRITE_REGB(hw, REG_SPI_FLASH_OP_PROGRAM,
+		flash_table[hw->flash_vendor].cmdPROGRAM);
+	ATL2_WRITE_REGB(hw, REG_SPI_FLASH_OP_SC_ERASE,
+		flash_table[hw->flash_vendor].cmdSECTOR_ERASE);
+	ATL2_WRITE_REGB(hw, REG_SPI_FLASH_OP_CHIP_ERASE,
+		flash_table[hw->flash_vendor].cmdCHIP_ERASE);
+	ATL2_WRITE_REGB(hw, REG_SPI_FLASH_OP_RDID,
+		flash_table[hw->flash_vendor].cmdRDID);
+	ATL2_WRITE_REGB(hw, REG_SPI_FLASH_OP_WREN,
+		flash_table[hw->flash_vendor].cmdWREN);
+	ATL2_WRITE_REGB(hw, REG_SPI_FLASH_OP_RDSR,
+		flash_table[hw->flash_vendor].cmdRDSR);
+	ATL2_WRITE_REGB(hw, REG_SPI_FLASH_OP_WRSR,
+		flash_table[hw->flash_vendor].cmdWRSR);
+	ATL2_WRITE_REGB(hw, REG_SPI_FLASH_OP_READ,
+		flash_table[hw->flash_vendor].cmdREAD);
+}
+
+/********************************************************************
+* Performs basic configuration of the adapter.
+*
+* hw - Struct containing variables accessed by shared code
+* Assumes that the controller has previously been reset and is in a
+* post-reset uninitialized state. Initializes multicast table,
+* and  Calls routines to setup link
+* Leaves the transmit and receive units disabled and uninitialized.
+********************************************************************/
+static s32 atl2_init_hw(struct atl2_hw *hw)
+{
+	u32 ret_val = 0;
+
+	atl2_init_pcie(hw);
+
+	/* Zero out the Multicast HASH table */
+	/* clear the old settings from the multicast hash table */
+	ATL2_WRITE_REG(hw, REG_RX_HASH_TABLE, 0);
+	ATL2_WRITE_REG_ARRAY(hw, REG_RX_HASH_TABLE, 1, 0);
+
+	atl2_init_flash_opcode(hw);
+
+	ret_val = atl2_phy_init(hw);
+
+	return ret_val;
+}
+
+/*
+ * Detects the current speed and duplex settings of the hardware.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * speed - Speed of the connection
+ * duplex - Duplex setting of the connection
+ */
+static s32 atl2_get_speed_and_duplex(struct atl2_hw *hw, u16 *speed,
+	u16 *duplex)
+{
+	s32 ret_val;
+	u16 phy_data;
+
+	/* Read PHY Specific Status Register (17) */
+	ret_val = atl2_read_phy_reg(hw, MII_ATLX_PSSR, &phy_data);
+	if (ret_val)
+		return ret_val;
+
+	if (!(phy_data & MII_ATLX_PSSR_SPD_DPLX_RESOLVED))
+		return ATLX_ERR_PHY_RES;
+
+	switch (phy_data & MII_ATLX_PSSR_SPEED) {
+	case MII_ATLX_PSSR_100MBS:
+		*speed = SPEED_100;
+		break;
+	case MII_ATLX_PSSR_10MBS:
+		*speed = SPEED_10;
+		break;
+	default:
+		return ATLX_ERR_PHY_SPEED;
+		break;
+	}
+
+	if (phy_data & MII_ATLX_PSSR_DPLX)
+		*duplex = FULL_DUPLEX;
+	else
+		*duplex = HALF_DUPLEX;
+
+	return 0;
+}
+
+/*
+ * Reads the value from a PHY register
+ * hw - Struct containing variables accessed by shared code
+ * reg_addr - address of the PHY register to read
+ */
+static s32 atl2_read_phy_reg(struct atl2_hw *hw, u16 reg_addr, u16 *phy_data)
+{
+	u32 val;
+	int i;
+
+	val = ((u32)(reg_addr & MDIO_REG_ADDR_MASK)) << MDIO_REG_ADDR_SHIFT |
+		MDIO_START |
+		MDIO_SUP_PREAMBLE |
+		MDIO_RW |
+		MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT;
+	ATL2_WRITE_REG(hw, REG_MDIO_CTRL, val);
+
+	wmb();
+
+	for (i = 0; i < MDIO_WAIT_TIMES; i++) {
+		udelay(2);
+		val = ATL2_READ_REG(hw, REG_MDIO_CTRL);
+		if (!(val & (MDIO_START | MDIO_BUSY)))
+			break;
+		wmb();
+	}
+	if (!(val & (MDIO_START | MDIO_BUSY))) {
+		*phy_data = (u16)val;
+		return 0;
+	}
+
+	return ATLX_ERR_PHY;
+}
+
+/*
+ * Writes a value to a PHY register
+ * hw - Struct containing variables accessed by shared code
+ * reg_addr - address of the PHY register to write
+ * data - data to write to the PHY
+ */
+static s32 atl2_write_phy_reg(struct atl2_hw *hw, u32 reg_addr, u16 phy_data)
+{
+	int i;
+	u32 val;
+
+	val = ((u32)(phy_data & MDIO_DATA_MASK)) << MDIO_DATA_SHIFT |
+		(reg_addr & MDIO_REG_ADDR_MASK) << MDIO_REG_ADDR_SHIFT |
+		MDIO_SUP_PREAMBLE |
+		MDIO_START |
+		MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT;
+	ATL2_WRITE_REG(hw, REG_MDIO_CTRL, val);
+
+	wmb();
+
+	for (i = 0; i < MDIO_WAIT_TIMES; i++) {
+		udelay(2);
+		val = ATL2_READ_REG(hw, REG_MDIO_CTRL);
+		if (!(val & (MDIO_START | MDIO_BUSY)))
+			break;
+
+		wmb();
+	}
+
+	if (!(val & (MDIO_START | MDIO_BUSY)))
+		return 0;
+
+	return ATLX_ERR_PHY;
+}
+
+/*
+ * Configures PHY autoneg and flow control advertisement settings
+ *
+ * hw - Struct containing variables accessed by shared code
+ */
+static s32 atl2_phy_setup_autoneg_adv(struct atl2_hw *hw)
+{
+	s32 ret_val;
+	s16 mii_autoneg_adv_reg;
+
+	/* Read the MII Auto-Neg Advertisement Register (Address 4). */
+	mii_autoneg_adv_reg = MII_AR_DEFAULT_CAP_MASK;
+
+	/* Need to parse autoneg_advertised  and set up
+	 * the appropriate PHY registers.  First we will parse for
+	 * autoneg_advertised software override.  Since we can advertise
+	 * a plethora of combinations, we need to check each bit
+	 * individually.
+	 */
+
+	/* First we clear all the 10/100 mb speed bits in the Auto-Neg
+	 * Advertisement Register (Address 4) and the 1000 mb speed bits in
+	 * the  1000Base-T Control Register (Address 9). */
+	mii_autoneg_adv_reg &= ~MII_AR_SPEED_MASK;
+
+	/* Need to parse MediaType and setup the
+	 * appropriate PHY registers. */
+	switch (hw->MediaType) {
+	case MEDIA_TYPE_AUTO_SENSOR:
+		mii_autoneg_adv_reg |=
+			(MII_AR_10T_HD_CAPS |
+			MII_AR_10T_FD_CAPS  |
+			MII_AR_100TX_HD_CAPS|
+			MII_AR_100TX_FD_CAPS);
+		hw->autoneg_advertised =
+			ADVERTISE_10_HALF |
+			ADVERTISE_10_FULL |
+			ADVERTISE_100_HALF|
+			ADVERTISE_100_FULL;
+		break;
+	case MEDIA_TYPE_100M_FULL:
+		mii_autoneg_adv_reg |= MII_AR_100TX_FD_CAPS;
+		hw->autoneg_advertised = ADVERTISE_100_FULL;
+		break;
+	case MEDIA_TYPE_100M_HALF:
+		mii_autoneg_adv_reg |= MII_AR_100TX_HD_CAPS;
+		hw->autoneg_advertised = ADVERTISE_100_HALF;
+		break;
+	case MEDIA_TYPE_10M_FULL:
+		mii_autoneg_adv_reg |= MII_AR_10T_FD_CAPS;
+		hw->autoneg_advertised = ADVERTISE_10_FULL;
+		break;
+	default:
+		mii_autoneg_adv_reg |= MII_AR_10T_HD_CAPS;
+		hw->autoneg_advertised = ADVERTISE_10_HALF;
+		break;
+	}
+
+	/* flow control fixed to enable all */
+	mii_autoneg_adv_reg |= (MII_AR_ASM_DIR | MII_AR_PAUSE);
+
+	hw->mii_autoneg_adv_reg = mii_autoneg_adv_reg;
+
+	ret_val = atl2_write_phy_reg(hw, MII_ADVERTISE, mii_autoneg_adv_reg);
+
+	if (ret_val)
+		return ret_val;
+
+	return 0;
+}
+
+/*
+ * Resets the PHY and make all config validate
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Sets bit 15 and 12 of the MII Control regiser (for F001 bug)
+ */
+static s32 atl2_phy_commit(struct atl2_hw *hw)
+{
+	s32 ret_val;
+	u16 phy_data;
+
+	phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG;
+	ret_val = atl2_write_phy_reg(hw, MII_BMCR, phy_data);
+	if (ret_val) {
+		u32 val;
+		int i;
+		/* pcie serdes link may be down ! */
+		for (i = 0; i < 25; i++) {
+			msleep(1);
+			val = ATL2_READ_REG(hw, REG_MDIO_CTRL);
+			if (!(val & (MDIO_START | MDIO_BUSY)))
+				break;
+		}
+
+		if (0 != (val & (MDIO_START | MDIO_BUSY))) {
+			printk(KERN_ERR "atl2: PCIe link down for at least 25ms !\n");
+			return ret_val;
+		}
+	}
+	return 0;
+}
+
+static s32 atl2_phy_init(struct atl2_hw *hw)
+{
+	s32 ret_val;
+	u16 phy_val;
+
+	if (hw->phy_configured)
+		return 0;
+
+	/* Enable PHY */
+	ATL2_WRITE_REGW(hw, REG_PHY_ENABLE, 1);
+	ATL2_WRITE_FLUSH(hw);
+	msleep(1);
+
+	/* check if the PHY is in powersaving mode */
+	atl2_write_phy_reg(hw, MII_DBG_ADDR, 0);
+	atl2_read_phy_reg(hw, MII_DBG_DATA, &phy_val);
+
+	/* 024E / 124E 0r 0274 / 1274 ? */
+	if (phy_val & 0x1000) {
+		phy_val &= ~0x1000;
+		atl2_write_phy_reg(hw, MII_DBG_DATA, phy_val);
+	}
+
+	msleep(1);
+
+	/*Enable PHY LinkChange Interrupt */
+	ret_val = atl2_write_phy_reg(hw, 18, 0xC00);
+	if (ret_val)
+		return ret_val;
+
+	/* setup AutoNeg parameters */
+	ret_val = atl2_phy_setup_autoneg_adv(hw);
+	if (ret_val)
+		return ret_val;
+
+	/* SW.Reset & En-Auto-Neg to restart Auto-Neg */
+	ret_val = atl2_phy_commit(hw);
+	if (ret_val)
+		return ret_val;
+
+	hw->phy_configured = true;
+
+	return ret_val;
+}
+
+static void atl2_set_mac_addr(struct atl2_hw *hw)
+{
+	u32 value;
+	/* 00-0B-6A-F6-00-DC
+	 * 0:  6AF600DC   1: 000B
+	 * low dword */
+	value = (((u32)hw->mac_addr[2]) << 24) |
+		(((u32)hw->mac_addr[3]) << 16) |
+		(((u32)hw->mac_addr[4]) << 8)  |
+		(((u32)hw->mac_addr[5]));
+	ATL2_WRITE_REG_ARRAY(hw, REG_MAC_STA_ADDR, 0, value);
+	/* hight dword */
+	value = (((u32)hw->mac_addr[0]) << 8) |
+		(((u32)hw->mac_addr[1]));
+	ATL2_WRITE_REG_ARRAY(hw, REG_MAC_STA_ADDR, 1, value);
+}
+
+/*
+ * check_eeprom_exist
+ * return 0 if eeprom exist
+ */
+static int atl2_check_eeprom_exist(struct atl2_hw *hw)
+{
+	u32 value;
+
+	value = ATL2_READ_REG(hw, REG_SPI_FLASH_CTRL);
+	if (value & SPI_FLASH_CTRL_EN_VPD) {
+		value &= ~SPI_FLASH_CTRL_EN_VPD;
+		ATL2_WRITE_REG(hw, REG_SPI_FLASH_CTRL, value);
+	}
+	value = ATL2_READ_REGW(hw, REG_PCIE_CAP_LIST);
+	return ((value & 0xFF00) == 0x6C00) ? 0 : 1;
+}
+
+/* FIXME: This doesn't look right. -- CHS */
+static bool atl2_write_eeprom(struct atl2_hw *hw, u32 offset, u32 value)
+{
+	return true;
+}
+
+static bool atl2_read_eeprom(struct atl2_hw *hw, u32 Offset, u32 *pValue)
+{
+	int i;
+	u32    Control;
+
+	if (Offset & 0x3)
+		return false; /* address do not align */
+
+	ATL2_WRITE_REG(hw, REG_VPD_DATA, 0);
+	Control = (Offset & VPD_CAP_VPD_ADDR_MASK) << VPD_CAP_VPD_ADDR_SHIFT;
+	ATL2_WRITE_REG(hw, REG_VPD_CAP, Control);
+
+	for (i = 0; i < 10; i++) {
+		msleep(2);
+		Control = ATL2_READ_REG(hw, REG_VPD_CAP);
+		if (Control & VPD_CAP_VPD_FLAG)
+			break;
+	}
+
+	if (Control & VPD_CAP_VPD_FLAG) {
+		*pValue = ATL2_READ_REG(hw, REG_VPD_DATA);
+		return true;
+	}
+	return false; /* timeout */
+}
+
+static void atl2_force_ps(struct atl2_hw *hw)
+{
+	u16 phy_val;
+
+	atl2_write_phy_reg(hw, MII_DBG_ADDR, 0);
+	atl2_read_phy_reg(hw, MII_DBG_DATA, &phy_val);
+	atl2_write_phy_reg(hw, MII_DBG_DATA, phy_val | 0x1000);
+
+	atl2_write_phy_reg(hw, MII_DBG_ADDR, 2);
+	atl2_write_phy_reg(hw, MII_DBG_DATA, 0x3000);
+	atl2_write_phy_reg(hw, MII_DBG_ADDR, 3);
+	atl2_write_phy_reg(hw, MII_DBG_DATA, 0);
+}
+
+/* This is the only thing that needs to be changed to adjust the
+ * maximum number of ports that the driver can manage.
+ */
+#define ATL2_MAX_NIC 4
+
+#define OPTION_UNSET    -1
+#define OPTION_DISABLED 0
+#define OPTION_ENABLED  1
+
+/* All parameters are treated the same, as an integer array of values.
+ * This macro just reduces the need to repeat the same declaration code
+ * over and over (plus this helps to avoid typo bugs).
+ */
+#define ATL2_PARAM_INIT {[0 ... ATL2_MAX_NIC] = OPTION_UNSET}
+#ifndef module_param_array
+/* Module Parameters are always initialized to -1, so that the driver
+ * can tell the difference between no user specified value or the
+ * user asking for the default value.
+ * The true default values are loaded in when atl2_check_options is called.
+ *
+ * This is a GCC extension to ANSI C.
+ * See the item "Labeled Elements in Initializers" in the section
+ * "Extensions to the C Language Family" of the GCC documentation.
+ */
+
+#define ATL2_PARAM(X, desc) \
+    static const int __devinitdata X[ATL2_MAX_NIC + 1] = ATL2_PARAM_INIT; \
+    MODULE_PARM(X, "1-" __MODULE_STRING(ATL2_MAX_NIC) "i"); \
+    MODULE_PARM_DESC(X, desc);
+#else
+#define ATL2_PARAM(X, desc) \
+    static int __devinitdata X[ATL2_MAX_NIC+1] = ATL2_PARAM_INIT; \
+    static int num_##X = 0; \
+    module_param_array_named(X, X, int, &num_##X, 0); \
+    MODULE_PARM_DESC(X, desc);
+#endif
+
+/*
+ * Transmit Memory Size
+ * Valid Range: 64-2048
+ * Default Value: 128
+ */
+#define ATL2_MIN_TX_MEMSIZE		4	/* 4KB */
+#define ATL2_MAX_TX_MEMSIZE		64	/* 64KB */
+#define ATL2_DEFAULT_TX_MEMSIZE		8	/* 8KB */
+ATL2_PARAM(TxMemSize, "Bytes of Transmit Memory");
+
+/*
+ * Receive Memory Block Count
+ * Valid Range: 16-512
+ * Default Value: 128
+ */
+#define ATL2_MIN_RXD_COUNT		16
+#define ATL2_MAX_RXD_COUNT		512
+#define ATL2_DEFAULT_RXD_COUNT		64
+ATL2_PARAM(RxMemBlock, "Number of receive memory block");
+
+/*
+ * User Specified MediaType Override
+ *
+ * Valid Range: 0-5
+ *  - 0    - auto-negotiate at all supported speeds
+ *  - 1    - only link at 1000Mbps Full Duplex
+ *  - 2    - only link at 100Mbps Full Duplex
+ *  - 3    - only link at 100Mbps Half Duplex
+ *  - 4    - only link at 10Mbps Full Duplex
+ *  - 5    - only link at 10Mbps Half Duplex
+ * Default Value: 0
+ */
+ATL2_PARAM(MediaType, "MediaType Select");
+
+/*
+ * Interrupt Moderate Timer in units of 2048 ns (~2 us)
+ * Valid Range: 10-65535
+ * Default Value: 45000(90ms)
+ */
+#define INT_MOD_DEFAULT_CNT	100 /* 200us */
+#define INT_MOD_MAX_CNT		65000
+#define INT_MOD_MIN_CNT		50
+ATL2_PARAM(IntModTimer, "Interrupt Moderator Timer");
+
+/*
+ * FlashVendor
+ * Valid Range: 0-2
+ * 0 - Atmel
+ * 1 - SST
+ * 2 - ST
+ */
+ATL2_PARAM(FlashVendor, "SPI Flash Vendor");
+
+#define AUTONEG_ADV_DEFAULT	0x2F
+#define AUTONEG_ADV_MASK	0x2F
+#define FLOW_CONTROL_DEFAULT	FLOW_CONTROL_FULL
+
+#define FLASH_VENDOR_DEFAULT	0
+#define FLASH_VENDOR_MIN	0
+#define FLASH_VENDOR_MAX	2
+
+struct atl2_option {
+	enum { enable_option, range_option, list_option } type;
+	char *name;
+	char *err;
+	int  def;
+	union {
+		struct { /* range_option info */
+			int min;
+			int max;
+		} r;
+		struct { /* list_option info */
+			int nr;
+			struct atl2_opt_list { int i; char *str; } *p;
+		} l;
+	} arg;
+};
+
+static int __devinit atl2_validate_option(int *value, struct atl2_option *opt)
+{
+	int i;
+	struct atl2_opt_list *ent;
+
+	if (*value == OPTION_UNSET) {
+		*value = opt->def;
+		return 0;
+	}
+
+	switch (opt->type) {
+	case enable_option:
+		switch (*value) {
+		case OPTION_ENABLED:
+			printk(KERN_INFO "%s Enabled\n", opt->name);
+			return 0;
+			break;
+		case OPTION_DISABLED:
+			printk(KERN_INFO "%s Disabled\n", opt->name);
+			return 0;
+			break;
+		}
+		break;
+	case range_option:
+		if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
+			printk(KERN_INFO "%s set to %i\n", opt->name, *value);
+			return 0;
+		}
+		break;
+	case list_option:
+		for (i = 0; i < opt->arg.l.nr; i++) {
+			ent = &opt->arg.l.p[i];
+			if (*value == ent->i) {
+				if (ent->str[0] != '\0')
+					printk(KERN_INFO "%s\n", ent->str);
+			return 0;
+			}
+		}
+		break;
+	default:
+		BUG();
+	}
+
+	printk(KERN_INFO "Invalid %s specified (%i) %s\n",
+		opt->name, *value, opt->err);
+	*value = opt->def;
+	return -1;
+}
+
+/*
+ * atl2_check_options - Range Checking for Command Line Parameters
+ * @adapter: board private structure
+ *
+ * This routine checks all command line parameters for valid user
+ * input.  If an invalid value is given, or if no user specified
+ * value exists, a default value is used.  The final value is stored
+ * in a variable in the adapter structure.
+ */
+static void __devinit atl2_check_options(struct atl2_adapter *adapter)
+{
+	int val;
+	struct atl2_option opt;
+	int bd = adapter->bd_number;
+	if (bd >= ATL2_MAX_NIC) {
+		printk(KERN_NOTICE "Warning: no configuration for board #%i\n",
+			bd);
+		printk(KERN_NOTICE "Using defaults for all values\n");
+#ifndef module_param_array
+		bd = ATL2_MAX_NIC;
+#endif
+	}
+
+	/* Bytes of Transmit Memory */
+	opt.type = range_option;
+	opt.name = "Bytes of Transmit Memory";
+	opt.err = "using default of " __MODULE_STRING(ATL2_DEFAULT_TX_MEMSIZE);
+	opt.def = ATL2_DEFAULT_TX_MEMSIZE;
+	opt.arg.r.min = ATL2_MIN_TX_MEMSIZE;
+	opt.arg.r.max = ATL2_MAX_TX_MEMSIZE;
+#ifdef module_param_array
+	if (num_TxMemSize > bd) {
+#endif
+		val = TxMemSize[bd];
+		atl2_validate_option(&val, &opt);
+		adapter->txd_ring_size = ((u32) val) * 1024;
+#ifdef module_param_array
+	} else
+		adapter->txd_ring_size = ((u32)opt.def) * 1024;
+#endif
+	/* txs ring size: */
+	adapter->txs_ring_size = adapter->txd_ring_size / 128;
+	if (adapter->txs_ring_size > 160)
+		adapter->txs_ring_size = 160;
+
+	/* Receive Memory Block Count */
+	opt.type = range_option;
+	opt.name = "Number of receive memory block";
+	opt.err = "using default of " __MODULE_STRING(ATL2_DEFAULT_RXD_COUNT);
+	opt.def = ATL2_DEFAULT_RXD_COUNT;
+	opt.arg.r.min = ATL2_MIN_RXD_COUNT;
+	opt.arg.r.max = ATL2_MAX_RXD_COUNT;
+#ifdef module_param_array
+	if (num_RxMemBlock > bd) {
+#endif
+		val = RxMemBlock[bd];
+		atl2_validate_option(&val, &opt);
+		adapter->rxd_ring_size = (u32)val;
+		/* FIXME */
+		/* ((u16)val)&~1; */	/* even number */
+#ifdef module_param_array
+	} else
+		adapter->rxd_ring_size = (u32)opt.def;
+#endif
+	/* init RXD Flow control value */
+	adapter->hw.fc_rxd_hi = (adapter->rxd_ring_size / 8) * 7;
+	adapter->hw.fc_rxd_lo = (ATL2_MIN_RXD_COUNT / 8) >
+		(adapter->rxd_ring_size / 12) ? (ATL2_MIN_RXD_COUNT / 8) :
+		(adapter->rxd_ring_size / 12);
+
+	/* Interrupt Moderate Timer */
+	opt.type = range_option;
+	opt.name = "Interrupt Moderate Timer";
+	opt.err = "using default of " __MODULE_STRING(INT_MOD_DEFAULT_CNT);
+	opt.def = INT_MOD_DEFAULT_CNT;
+	opt.arg.r.min = INT_MOD_MIN_CNT;
+	opt.arg.r.max = INT_MOD_MAX_CNT;
+#ifdef module_param_array
+	if (num_IntModTimer > bd) {
+#endif
+		val = IntModTimer[bd];
+		atl2_validate_option(&val, &opt);
+		adapter->imt = (u16) val;
+#ifdef module_param_array
+	} else
+		adapter->imt = (u16)(opt.def);
+#endif
+	/* Flash Vendor */
+	opt.type = range_option;
+	opt.name = "SPI Flash Vendor";
+	opt.err = "using default of " __MODULE_STRING(FLASH_VENDOR_DEFAULT);
+	opt.def = FLASH_VENDOR_DEFAULT;
+	opt.arg.r.min = FLASH_VENDOR_MIN;
+	opt.arg.r.max = FLASH_VENDOR_MAX;
+#ifdef module_param_array
+	if (num_FlashVendor > bd) {
+#endif
+		val = FlashVendor[bd];
+		atl2_validate_option(&val, &opt);
+		adapter->hw.flash_vendor = (u8) val;
+#ifdef module_param_array
+	} else
+		adapter->hw.flash_vendor = (u8)(opt.def);
+#endif
+	/* MediaType */
+	opt.type = range_option;
+	opt.name = "Speed/Duplex Selection";
+	opt.err = "using default of " __MODULE_STRING(MEDIA_TYPE_AUTO_SENSOR);
+	opt.def = MEDIA_TYPE_AUTO_SENSOR;
+	opt.arg.r.min = MEDIA_TYPE_AUTO_SENSOR;
+	opt.arg.r.max = MEDIA_TYPE_10M_HALF;
+#ifdef module_param_array
+	if (num_MediaType > bd) {
+#endif
+		val = MediaType[bd];
+		atl2_validate_option(&val, &opt);
+		adapter->hw.MediaType = (u16) val;
+#ifdef module_param_array
+	} else
+		adapter->hw.MediaType = (u16)(opt.def);
+#endif
+}
diff -puN /dev/null drivers/net/atlx/atl2.h
--- /dev/null
+++ a/drivers/net/atlx/atl2.h
@@ -0,0 +1,530 @@ 
+/* atl2.h -- atl2 driver definitions
+ *
+ * Copyright(c) 2007 Atheros Corporation. All rights reserved.
+ * Copyright(c) 2006 xiong huang <xiong.huang@atheros.com>
+ * Copyright(c) 2007 Chris Snook <csnook@redhat.com>
+ *
+ * Derived from Intel e1000 driver
+ * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#ifndef _ATL2_H_
+#define _ATL2_H_
+
+#include <asm/atomic.h>
+#include <linux/netdevice.h>
+
+#ifndef _ATL2_HW_H_
+#define _ATL2_HW_H_
+
+#ifndef _ATL2_OSDEP_H_
+#define _ATL2_OSDEP_H_
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/if_ether.h>
+
+#include "atlx.h"
+
+#ifdef ETHTOOL_OPS_COMPAT
+extern int ethtool_ioctl(struct ifreq *ifr);
+#endif
+
+#define PCI_COMMAND_REGISTER	PCI_COMMAND
+#define CMD_MEM_WRT_INVALIDATE	PCI_COMMAND_INVALIDATE
+#define ETH_ADDR_LEN		ETH_ALEN
+
+#define ATL2_WRITE_REG(a, reg, value) (iowrite32((value), \
+	((a)->hw_addr + (reg))))
+
+#define ATL2_WRITE_FLUSH(a) (ioread32((a)->hw_addr))
+
+#define ATL2_READ_REG(a, reg) (ioread32((a)->hw_addr + (reg)))
+
+#define ATL2_WRITE_REGB(a, reg, value) (iowrite8((value), \
+	((a)->hw_addr + (reg))))
+
+#define ATL2_READ_REGB(a, reg) (ioread8((a)->hw_addr + (reg)))
+
+#define ATL2_WRITE_REGW(a, reg, value) (iowrite16((value), \
+	((a)->hw_addr + (reg))))
+
+#define ATL2_READ_REGW(a, reg) (ioread16((a)->hw_addr + (reg)))
+
+#define ATL2_WRITE_REG_ARRAY(a, reg, offset, value) \
+	(iowrite32((value), (((a)->hw_addr + (reg)) + ((offset) << 2))))
+
+#define ATL2_READ_REG_ARRAY(a, reg, offset) \
+	(ioread32(((a)->hw_addr + (reg)) + ((offset) << 2)))
+
+#endif /* _ATL2_OSDEP_H_ */
+
+struct atl2_adapter;
+struct atl2_hw;
+
+/* function prototype */
+static s32 atl2_reset_hw(struct atl2_hw *hw);
+static s32 atl2_read_mac_addr(struct atl2_hw *hw);
+static s32 atl2_init_hw(struct atl2_hw *hw);
+static s32 atl2_get_speed_and_duplex(struct atl2_hw *hw, u16 *speed,
+	u16 *duplex);
+static u32 atl2_hash_mc_addr(struct atl2_hw *hw, u8 *mc_addr);
+static void atl2_hash_set(struct atl2_hw *hw, u32 hash_value);
+static s32 atl2_read_phy_reg(struct atl2_hw *hw, u16 reg_addr, u16 *phy_data);
+static s32 atl2_write_phy_reg(struct atl2_hw *hw, u32 reg_addr, u16 phy_data);
+static void atl2_read_pci_cfg(struct atl2_hw *hw, u32 reg, u16 *value);
+static void atl2_write_pci_cfg(struct atl2_hw *hw, u32 reg, u16 *value);
+static void atl2_set_mac_addr(struct atl2_hw *hw);
+static bool atl2_read_eeprom(struct atl2_hw *hw, u32 Offset, u32 *pValue);
+static bool atl2_write_eeprom(struct atl2_hw *hw, u32 offset, u32 value);
+static s32 atl2_phy_init(struct atl2_hw *hw);
+static int atl2_check_eeprom_exist(struct atl2_hw *hw);
+static void atl2_force_ps(struct atl2_hw *hw);
+
+/* register definition */
+
+/* Block IDLE Status Register */
+#define IDLE_STATUS_RXMAC	1	/* 1: RXMAC is non-IDLE */
+#define IDLE_STATUS_TXMAC	2	/* 1: TXMAC is non-IDLE */
+#define IDLE_STATUS_DMAR	8	/* 1: DMAR is non-IDLE */
+#define IDLE_STATUS_DMAW	4	/* 1: DMAW is non-IDLE */
+
+/* MDIO Control Register */
+#define MDIO_WAIT_TIMES		10
+
+/* MAC Control Register */
+#define MAC_CTRL_DBG_TX_BKPRESURE	0x100000	/* 1: TX max backoff */
+#define MAC_CTRL_MACLP_CLK_PHY		0x8000000	/* 1: 25MHz from phy */
+#define MAC_CTRL_HALF_LEFT_BUF_SHIFT	28
+#define MAC_CTRL_HALF_LEFT_BUF_MASK	0xF		/* MAC retry buf x32B */
+
+/* Internal SRAM Partition Register */
+#define REG_SRAM_TXRAM_END	0x1500	/* Internal tail address of TXRAM
+					 * default: 2byte*1024 */
+#define REG_SRAM_RXRAM_END	0x1502	/* Internal tail address of RXRAM
+					 * default: 2byte*1024 */
+
+/* Descriptor Control register */
+#define REG_TXD_BASE_ADDR_LO	0x1544	/* The base address of the Transmit
+					 * Data Mem low 32-bit(dword align) */
+#define REG_TXD_MEM_SIZE	0x1548	/* Transmit Data Memory size(by
+					 * double word , max 256KB) */
+#define REG_TXS_BASE_ADDR_LO	0x154C	/* The base address of the Transmit
+					 * Status Memory low 32-bit(dword word
+					 * align) */
+#define REG_TXS_MEM_SIZE	0x1550	/* double word unit, max 4*2047
+					 * bytes. */
+#define REG_RXD_BASE_ADDR_LO	0x1554	/* The base address of the Transmit
+					 * Status Memory low 32-bit(unit 8
+					 * bytes) */
+#define REG_RXD_BUF_NUM		0x1558	/* Receive Data & Status Memory buffer
+					 * number (unit 1536bytes, max
+					 * 1536*2047) */
+
+/* DMAR Control Register */
+#define REG_DMAR	0x1580
+#define     DMAR_EN	0x1	/* 1: Enable DMAR */
+
+/* TX Cur-Through (early tx threshold) Control Register */
+#define REG_TX_CUT_THRESH	0x1590	/* TxMac begin transmit packet
+					 * threshold(unit word) */
+
+/* DMAW Control Register */
+#define REG_DMAW	0x15A0
+#define     DMAW_EN	0x1
+
+/* Flow control register */
+#define REG_PAUSE_ON_TH		0x15A8	/* RXD high watermark of overflow
+					 * threshold configuration register */
+#define REG_PAUSE_OFF_TH	0x15AA	/* RXD lower watermark of overflow
+					 * threshold configuration register */
+
+/* Mailbox Register */
+#define REG_MB_TXD_WR_IDX	0x15f0	/* double word align */
+#define REG_MB_RXD_RD_IDX	0x15F4	/* RXD Read index (unit: 1536byets) */
+
+/* Interrupt Status Register */
+#define ISR_TIMER	1	/* Interrupt when Timer counts down to zero */
+#define ISR_MANUAL	2	/* Software manual interrupt, for debug. Set
+				 * when SW_MAN_INT_EN is set in Table 51
+				 * Selene Master Control Register
+				 * (Offset 0x1400). */
+#define ISR_RXF_OV	4	/* RXF overflow interrupt */
+#define ISR_TXF_UR	8	/* TXF underrun interrupt */
+#define ISR_TXS_OV	0x10	/* Internal transmit status buffer full
+				 * interrupt */
+#define ISR_RXS_OV	0x20	/* Internal receive status buffer full
+				 * interrupt */
+#define ISR_LINK_CHG	0x40	/* Link Status Change Interrupt */
+#define ISR_HOST_TXD_UR	0x80
+#define ISR_HOST_RXD_OV	0x100	/* Host rx data memory full , one pulse */
+#define ISR_DMAR_TO_RST	0x200	/* DMAR op timeout interrupt. SW should
+				 * do Reset */
+#define ISR_DMAW_TO_RST	0x400
+#define ISR_PHY		0x800	/* phy interrupt */
+#define ISR_TS_UPDATE	0x10000	/* interrupt after new tx pkt status written
+				 * to host */
+#define ISR_RS_UPDATE	0x20000	/* interrupt ater new rx pkt status written
+				 * to host. */
+#define ISR_TX_EARLY	0x40000	/* interrupt when txmac begin transmit one
+				 * packet */
+
+#define ISR_TX_EVENT (ISR_TXF_UR | ISR_TXS_OV | ISR_HOST_TXD_UR |\
+	ISR_TS_UPDATE | ISR_TX_EARLY)
+#define ISR_RX_EVENT (ISR_RXF_OV | ISR_RXS_OV | ISR_HOST_RXD_OV |\
+	 ISR_RS_UPDATE)
+
+#define IMR_NORMAL_MASK		(\
+	/*ISR_LINK_CHG		|*/\
+	ISR_MANUAL		|\
+	ISR_DMAR_TO_RST		|\
+	ISR_DMAW_TO_RST		|\
+	ISR_PHY			|\
+	ISR_PHY_LINKDOWN	|\
+	ISR_TS_UPDATE		|\
+	ISR_RS_UPDATE)
+
+/* Receive MAC Statistics Registers */
+#define REG_STS_RX_PAUSE	0x1700	/* Num pause packets received */
+#define REG_STS_RXD_OV		0x1704	/* Num frames dropped due to RX
+					 * FIFO overflow */
+#define REG_STS_RXS_OV		0x1708	/* Num frames dropped due to RX
+					 * Status Buffer Overflow */
+#define REG_STS_RX_FILTER	0x170C	/* Num packets dropped due to
+					 * address filtering */
+
+/* MII definitions */
+
+/* PHY Common Register */
+#define MII_SMARTSPEED	0x14
+#define MII_DBG_ADDR	0x1D
+#define MII_DBG_DATA	0x1E
+
+/* PCI Command Register Bit Definitions */
+#define PCI_REG_COMMAND		0x04
+#define CMD_IO_SPACE		0x0001
+#define CMD_MEMORY_SPACE	0x0002
+#define CMD_BUS_MASTER		0x0004
+
+#define MEDIA_TYPE_100M_FULL	1
+#define MEDIA_TYPE_100M_HALF	2
+#define MEDIA_TYPE_10M_FULL	3
+#define MEDIA_TYPE_10M_HALF	4
+
+#define AUTONEG_ADVERTISE_SPEED_DEFAULT	0x000F	/* Everything */
+
+/* The size (in bytes) of a ethernet packet */
+#define ENET_HEADER_SIZE		14
+#define MAXIMUM_ETHERNET_FRAME_SIZE	1518	/* with FCS */
+#define MINIMUM_ETHERNET_FRAME_SIZE	64	/* with FCS */
+#define ETHERNET_FCS_SIZE		4
+#define MAX_JUMBO_FRAME_SIZE		0x2000
+#define VLAN_SIZE                                               4
+
+struct tx_pkt_header {
+	unsigned pkt_size:11;
+	unsigned:4;			/* reserved */
+	unsigned ins_vlan:1;		/* txmac should insert vlan */
+	unsigned short vlan;		/* vlan tag */
+};
+/* FIXME: replace above bitfields with MASK/SHIFT defines below */
+#define TX_PKT_HEADER_SIZE_MASK		0x7FF
+#define TX_PKT_HEADER_SIZE_SHIFT	0
+#define TX_PKT_HEADER_INS_VLAN_MASK	0x1
+#define TX_PKT_HEADER_INS_VLAN_SHIFT	15
+#define TX_PKT_HEADER_VLAN_TAG_MASK	0xFFFF
+#define TX_PKT_HEADER_VLAN_TAG_SHIFT	16
+
+struct tx_pkt_status {
+	unsigned pkt_size:11;
+	unsigned:5;		/* reserved */
+	unsigned ok:1;		/* current packet transmitted without error */
+	unsigned bcast:1;	/* broadcast packet */
+	unsigned mcast:1;	/* multicast packet */
+	unsigned pause:1;	/* transmiited a pause frame */
+	unsigned ctrl:1;
+	unsigned defer:1;    	/* current packet is xmitted with defer */
+	unsigned exc_defer:1;
+	unsigned single_col:1;
+	unsigned multi_col:1;
+	unsigned late_col:1;
+	unsigned abort_col:1;
+	unsigned underun:1;	/* current packet is aborted
+				 * due to txram underrun */
+	unsigned:3;		/* reserved */
+	unsigned update:1;	/* always 1'b1 in tx_status_buf */
+};
+/* FIXME: replace above bitfields with MASK/SHIFT defines below */
+#define TX_PKT_STATUS_SIZE_MASK		0x7FF
+#define TX_PKT_STATUS_SIZE_SHIFT	0
+#define TX_PKT_STATUS_OK_MASK		0x1
+#define TX_PKT_STATUS_OK_SHIFT		16
+#define TX_PKT_STATUS_BCAST_MASK	0x1
+#define TX_PKT_STATUS_BCAST_SHIFT	17
+#define TX_PKT_STATUS_MCAST_MASK	0x1
+#define TX_PKT_STATUS_MCAST_SHIFT	18
+#define TX_PKT_STATUS_PAUSE_MASK	0x1
+#define TX_PKT_STATUS_PAUSE_SHIFT	19
+#define TX_PKT_STATUS_CTRL_MASK		0x1
+#define TX_PKT_STATUS_CTRL_SHIFT	20
+#define TX_PKT_STATUS_DEFER_MASK	0x1
+#define TX_PKT_STATUS_DEFER_SHIFT	21
+#define TX_PKT_STATUS_EXC_DEFER_MASK	0x1
+#define TX_PKT_STATUS_EXC_DEFER_SHIFT	22
+#define TX_PKT_STATUS_SINGLE_COL_MASK	0x1
+#define TX_PKT_STATUS_SINGLE_COL_SHIFT	23
+#define TX_PKT_STATUS_MULTI_COL_MASK	0x1
+#define TX_PKT_STATUS_MULTI_COL_SHIFT	24
+#define TX_PKT_STATUS_LATE_COL_MASK	0x1
+#define TX_PKT_STATUS_LATE_COL_SHIFT	25
+#define TX_PKT_STATUS_ABORT_COL_MASK	0x1
+#define TX_PKT_STATUS_ABORT_COL_SHIFT	26
+#define TX_PKT_STATUS_UNDERRUN_MASK	0x1
+#define TX_PKT_STATUS_UNDERRUN_SHIFT	27
+#define TX_PKT_STATUS_UPDATE_MASK	0x1
+#define TX_PKT_STATUS_UPDATE_SHIFT	31
+
+struct rx_pkt_status {
+	unsigned pkt_size:11;	/* packet size, max 2047 bytes */
+	unsigned:5;		/* reserved */
+	unsigned ok:1;		/* current packet received ok without error */
+	unsigned bcast:1;	/* current packet is broadcast */
+	unsigned mcast:1;	/* current packet is multicast */
+	unsigned pause:1;
+	unsigned ctrl:1;
+	unsigned crc:1;		/* received a packet with crc error */
+	unsigned code:1;	/* received a packet with code error */
+	unsigned runt:1;	/* received a packet less than 64 bytes
+				 * with good crc */
+	unsigned frag:1;	/* received a packet less than 64 bytes
+				 * with bad crc */
+	unsigned trunc:1;	/* current frame truncated due to rxram full */
+	unsigned align:1;	/* this packet is alignment error */
+	unsigned vlan:1;	/* this packet has vlan */
+	unsigned:3;		/* reserved */
+	unsigned update:1;
+	unsigned short vtag;	/* vlan tag */
+	unsigned:16;
+};
+/* FIXME: replace above bitfields with MASK/SHIFT defines below */
+#define RX_PKT_STATUS_SIZE_MASK		0x7FF
+#define RX_PKT_STATUS_SIZE_SHIFT	0
+#define RX_PKT_STATUS_OK_MASK		0x1
+#define RX_PKT_STATUS_OK_SHIFT		16
+#define RX_PKT_STATUS_BCAST_MASK	0x1
+#define RX_PKT_STATUS_BCAST_SHIFT	17
+#define RX_PKT_STATUS_MCAST_MASK	0x1
+#define RX_PKT_STATUS_MCAST_SHIFT	18
+#define RX_PKT_STATUS_PAUSE_MASK	0x1
+#define RX_PKT_STATUS_PAUSE_SHIFT	19
+#define RX_PKT_STATUS_CTRL_MASK		0x1
+#define RX_PKT_STATUS_CTRL_SHIFT	20
+#define RX_PKT_STATUS_CRC_MASK		0x1
+#define RX_PKT_STATUS_CRC_SHIFT		21
+#define RX_PKT_STATUS_CODE_MASK		0x1
+#define RX_PKT_STATUS_CODE_SHIFT	22
+#define RX_PKT_STATUS_RUNT_MASK		0x1
+#define RX_PKT_STATUS_RUNT_SHIFT	23
+#define RX_PKT_STATUS_FRAG_MASK		0x1
+#define RX_PKT_STATUS_FRAG_SHIFT	24
+#define RX_PKT_STATUS_TRUNK_MASK	0x1
+#define RX_PKT_STATUS_TRUNK_SHIFT	25
+#define RX_PKT_STATUS_ALIGN_MASK	0x1
+#define RX_PKT_STATUS_ALIGN_SHIFT	26
+#define RX_PKT_STATUS_VLAN_MASK		0x1
+#define RX_PKT_STATUS_VLAN_SHIFT	27
+#define RX_PKT_STATUS_UPDATE_MASK	0x1
+#define RX_PKT_STATUS_UPDATE_SHIFT	31
+#define RX_PKT_STATUS_VLAN_TAG_MASK	0xFFFF
+#define RX_PKT_STATUS_VLAN_TAG_SHIFT	32
+
+struct rx_desc {
+	struct rx_pkt_status	status;
+	unsigned char     	packet[1536-sizeof(struct rx_pkt_status)];
+};
+
+enum atl2_speed_duplex {
+	atl2_10_half = 0,
+	atl2_10_full = 1,
+	atl2_100_half = 2,
+	atl2_100_full = 3
+};
+
+struct atl2_spi_flash_dev {
+	const char *manu_name;	/* manufacturer id */
+	/* op-code */
+	u8 cmdWRSR;
+	u8 cmdREAD;
+	u8 cmdPROGRAM;
+	u8 cmdWREN;
+	u8 cmdWRDI;
+	u8 cmdRDSR;
+	u8 cmdRDID;
+	u8 cmdSECTOR_ERASE;
+	u8 cmdCHIP_ERASE;
+};
+
+/* Structure containing variables used by the shared code (atl2_hw.c) */
+struct atl2_hw {
+	u8 __iomem *hw_addr;
+	void *back;
+
+	u8 preamble_len;
+	u8 max_retry;          /* Retransmission maximum, afterwards the
+				* packet will be discarded. */
+	u8 jam_ipg;            /* IPG to start JAM for collision based flow
+				* control in half-duplex mode. In unit of
+				* 8-bit time. */
+	u8 ipgt;               /* Desired back to back inter-packet gap. The
+				* default is 96-bit time. */
+	u8 min_ifg;            /* Minimum number of IFG to enforce in between
+				* RX frames. Frame gap below such IFP is
+				* dropped. */
+	u8 ipgr1;              /* 64bit Carrier-Sense window */
+	u8 ipgr2;              /* 96-bit IPG window */
+	u8 retry_buf;          /* When half-duplex mode, should hold some
+				* bytes for mac retry . (8*4bytes unit) */
+
+	u16 fc_rxd_hi;
+	u16 fc_rxd_lo;
+	u16 lcol;              /* Collision Window */
+	u16 max_frame_size;
+
+	u16 MediaType;
+	u16 autoneg_advertised;
+	u16 pci_cmd_word;
+
+	u16 mii_autoneg_adv_reg;
+
+	u32 mem_rang;
+	u32 txcw;
+	u32 mc_filter_type;
+	u32 num_mc_addrs;
+	u32 collision_delta;
+	u32 tx_packet_delta;
+	u16 phy_spd_default;
+
+	u16 device_id;
+	u16 vendor_id;
+	u16 subsystem_id;
+	u16 subsystem_vendor_id;
+	u8 revision_id;
+
+	/* spi flash */
+	u8 flash_vendor;
+
+	u8 dma_fairness;
+	u8 mac_addr[NODE_ADDRESS_SIZE];
+	u8 perm_mac_addr[NODE_ADDRESS_SIZE];
+
+	/* FIXME */
+	/* bool phy_preamble_sup; */
+	bool phy_configured;
+};
+
+#endif /* _ATL2_HW_H_ */
+
+struct atl2_ring_header {
+    /* pointer to the descriptor ring memory */
+    void *desc;
+    /* physical adress of the descriptor ring */
+    dma_addr_t dma;
+    /* length of descriptor ring in bytes */
+    unsigned int size;
+};
+
+/* board specific private data structure */
+struct atl2_adapter {
+	/* OS defined structs */
+	struct net_device *netdev;
+	struct pci_dev *pdev;
+	struct net_device_stats net_stats;
+#ifdef NETIF_F_HW_VLAN_TX
+	struct vlan_group *vlgrp;
+#endif
+	u32 wol;
+	u16 link_speed;
+	u16 link_duplex;
+
+	spinlock_t stats_lock;
+	spinlock_t tx_lock;
+
+	struct work_struct reset_task;
+	struct work_struct link_chg_task;
+	struct timer_list watchdog_timer;
+	struct timer_list phy_config_timer;
+
+	unsigned long cfg_phy;
+	bool mac_disabled;
+
+	/* All Descriptor memory */
+	dma_addr_t	ring_dma;
+	void		*ring_vir_addr;
+	int		ring_size;
+
+	struct tx_pkt_header	*txd_ring;
+	dma_addr_t	txd_dma;
+
+	struct tx_pkt_status	*txs_ring;
+	dma_addr_t	txs_dma;
+
+	struct rx_desc	*rxd_ring;
+	dma_addr_t	rxd_dma;
+
+	u32 txd_ring_size;         /* bytes per unit */
+	u32 txs_ring_size;         /* dwords per unit */
+	u32 rxd_ring_size;         /* 1536 bytes per unit */
+
+	/* read /write ptr: */
+	/* host */
+	u32 txd_write_ptr;
+	u32 txs_next_clear;
+	u32 rxd_read_ptr;
+
+	/* nic */
+	atomic_t txd_read_ptr;
+	atomic_t txs_write_ptr;
+	u32 rxd_write_ptr;
+
+	/* Interrupt Moderator timer ( 2us resolution) */
+	u16 imt;
+	/* Interrupt Clear timer (2us resolution) */
+	u16 ict;
+
+	unsigned long flags;
+	/* structs defined in atl2_hw.h */
+	u32 bd_number;     /* board number */
+	bool pci_using_64;
+	bool have_msi;
+	struct atl2_hw hw;
+
+	u32 usr_cmd;
+	/* FIXME */
+	/* u32 regs_buff[ATL2_REGS_LEN]; */
+	u32 pci_state[16];
+
+	u32 *config_space;
+};
+
+enum atl2_state_t {
+	__ATL2_TESTING,
+	__ATL2_RESETTING,
+	__ATL2_DOWN
+};
+
+#endif /* _ATL2_H_ */
diff -puN include/linux/pci_ids.h~atl2-add-atl2-driver include/linux/pci_ids.h
--- a/include/linux/pci_ids.h~atl2-add-atl2-driver
+++ a/include/linux/pci_ids.h
@@ -2225,6 +2225,7 @@ 
 
 #define PCI_VENDOR_ID_ATTANSIC		0x1969
 #define PCI_DEVICE_ID_ATTANSIC_L1	0x1048
+#define PCI_DEVICE_ID_ATTANSIC_L2	0x2048
 
 #define PCI_VENDOR_ID_JMICRON		0x197B
 #define PCI_DEVICE_ID_JMICRON_JMB360	0x2360