[2/3] dt-bindings: net: dsa: Document B53 SRAB interrupts and registers
diff mbox series

Message ID 20180827200344.16158-3-f.fainelli@gmail.com
State Superseded
Headers show
  • ARM: NSP updates to support switch interrupts/SFP
Related show

Commit Message

Florian Fainelli Aug. 27, 2018, 8:03 p.m. UTC
Document the Broadcom roboswitch Switch Register Access Block interrupt
lines and additional register base addresses for port mux configuration
and SGMII status/configuration registers.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
 .../devicetree/bindings/net/dsa/b53.txt       | 23 +++++++++++++++++++
 1 file changed, 23 insertions(+)

diff mbox series

diff --git a/Documentation/devicetree/bindings/net/dsa/b53.txt b/Documentation/devicetree/bindings/net/dsa/b53.txt
index 1811e1972a7a..5f1029e853b8 100644
--- a/Documentation/devicetree/bindings/net/dsa/b53.txt
+++ b/Documentation/devicetree/bindings/net/dsa/b53.txt
@@ -46,6 +46,29 @@  Required properties:
       "brcm,bcm6368-switch" and the mandatory "brcm,bcm63xx-switch"
+Required properties for BCM585xx/586xx/88312 SoCs:
+ - reg: a total of 3 register base addresses, the first one must be the
+   Switch Register Access block base, the second is the port 5/4 mux
+   configuration register and the third one is the SGMII configuration
+   and status register base address.
+ - interrupts: a total of 13 interrupts must be specified, in the following
+   order: port 0-5, 7-8 link status change, then the integrated PHY interrupt,
+   then the timestamping interrupt and the sleep timer interrupts for ports
+   5,7,8.
+Optional properties for BCM585xx/586xx/88312 SoCs:
+  - reg-names: a total of 3 names matching the 3 base register address, must
+    be "srab", "mux_config" and "sgmii_config";
+  - interrupt-names: a total of 13 names matching the 13 interrupts specified
+    must be: "link_state_p0", "link_state_p1", "link_state_p2",
+    "link_state_p3", "link_state_p4", "link_state_p5", "link_state_p7",
+    "link_state_p8", "phy", "ts", "imp_sleep_timer_p5", "imp_sleep_timer_p7",
+    "imp_sleep_timer_p8"
 See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
 required and optional properties.