[2/6] dt-bindings: rcar-gen3-phy-usb3: Add r8a774a1 support
diff mbox series

Message ID 1535097375-5561-3-git-send-email-fabrizio.castro@bp.renesas.com
State Not Applicable
Headers show
Series
  • Document r8a774a1 USB bindings
Related show

Commit Message

Fabrizio Castro Aug. 24, 2018, 7:56 a.m. UTC
Document RZ/G2M (R8A774A1) SoC bindings.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
---
 Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

Comments

Simon Horman Aug. 30, 2018, 12:08 p.m. UTC | #1
On Fri, Aug 24, 2018 at 08:56:11AM +0100, Fabrizio Castro wrote:
> Document RZ/G2M (R8A774A1) SoC bindings.
> 
> Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> Reviewed-by: Biju Das <biju.das@bp.renesas.com>

Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Rob Herring Aug. 31, 2018, 12:19 p.m. UTC | #2
On Fri, 24 Aug 2018 08:56:11 +0100, Fabrizio Castro wrote:
> Document RZ/G2M (R8A774A1) SoC bindings.
> 
> Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> Reviewed-by: Biju Das <biju.das@bp.renesas.com>
> ---
>  Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt | 10 ++++++----
>  1 file changed, 6 insertions(+), 4 deletions(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

Patch
diff mbox series

diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt
index 47dd296..9d98266 100644
--- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt
+++ b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt
@@ -1,20 +1,22 @@ 
 * Renesas R-Car generation 3 USB 3.0 PHY
 
 This file provides information on what the device node for the R-Car generation
-3 USB 3.0 PHY contains.
+3 and RZ/G2 USB 3.0 PHY contain.
 If you want to enable spread spectrum clock (ssc), you should use USB_EXTAL
 instead of USB3_CLK. However, if you don't want to these features, you don't
 need this driver.
 
 Required properties:
-- compatible: "renesas,r8a7795-usb3-phy" if the device is a part of an R8A7795
+- compatible: "renesas,r8a774a1-usb3-phy" if the device is a part of an R8A774A1
+	      SoC.
+	      "renesas,r8a7795-usb3-phy" if the device is a part of an R8A7795
 	      SoC.
 	      "renesas,r8a7796-usb3-phy" if the device is a part of an R8A7796
 	      SoC.
 	      "renesas,r8a77965-usb3-phy" if the device is a part of an
 	      R8A77965 SoC.
-	      "renesas,rcar-gen3-usb3-phy" for a generic R-Car Gen3 compatible
-	      device.
+	      "renesas,rcar-gen3-usb3-phy" for a generic R-Car Gen3 or RZ/G2
+	      compatible device.
 
 	      When compatible with the generic version, nodes must list the
 	      SoC-specific version corresponding to the platform first