[v2,38/40] arm64: dts: tegra186: Add SDHCI tap and trim values

Message ID 1533924522-1037-39-git-send-email-avienamo@nvidia.com
State New
Headers show
Series
  • Tegra SDHCI add support for HS200 and UHS signaling
Related show

Commit Message

Aapo Vienamo Aug. 10, 2018, 6:08 p.m.
Add SDHCI inbound and outbound SDHCI sampling trimmer values for
Tegra186.

Signed-off-by: Aapo Vienamo <avienamo@nvidia.com>
---
 arch/arm64/boot/dts/nvidia/tegra186.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

Patch

diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
index b7020dd..3b2fe0d 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -246,6 +246,8 @@ 
 		nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x07>;
 		nvidia,pad-autocal-pull-up-offset-sdr104 = <0x03>;
 		nvidia,pad-autocal-pull-down-offset-sdr104 = <0x05>;
+		nvidia,default-tap = <0x5>;
+		nvidia,default-trim = <0xb>;
 		status = "disabled";
 	};
 
@@ -264,6 +266,8 @@ 
 		nvidia,pad-autocal-pull-down-offset-3v3-timeout = <0x06>;
 		nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x07>;
 		nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x07>;
+		nvidia,default-tap = <0x5>;
+		nvidia,default-trim = <0xb>;
 		status = "disabled";
 	};
 
@@ -284,6 +288,8 @@ 
 		nvidia,pad-autocal-pull-down-offset-3v3-timeout = <0x06>;
 		nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x07>;
 		nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x07>;
+		nvidia,default-tap = <0x5>;
+		nvidia,default-trim = <0xb>;
 		status = "disabled";
 	};
 
@@ -299,6 +305,8 @@ 
 		nvidia,pad-autocal-pull-down-offset-hs400 = <0x05>;
 		nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x0a>;
 		nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x0a>;
+		nvidia,default-tap = <0x5>;
+		nvidia,default-trim = <0x9>;
 		status = "disabled";
 	};