diff mbox series

[U-Boot,v1,3/4] configs: stm32mp15: Enable USB relative flags

Message ID 1533913935-27058-4-git-send-email-patrice.chotard@st.com
State Accepted
Delegated to: Tom Rini
Headers show
Series Add USB EHCI and gadget support for STM32MP1 | expand

Commit Message

Patrice CHOTARD Aug. 10, 2018, 3:12 p.m. UTC 
Enable config USB relative flags in order to enable USB
EHCI, DWC2 gadget, download and mass_storage support.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
---

 configs/stm32mp15_basic_defconfig | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

Comments

Tom Rini Sept. 26, 2018, 12:42 p.m. UTC | #1 
On Fri, Aug 10, 2018 at 05:12:13PM +0200, Patrice Chotard wrote:

> Enable config USB relative flags in order to enable USB
> EHCI, DWC2 gadget, download and mass_storage support.
> 
> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>

Applied to u-boot/master, thanks!
diff mbox series

Patch

diff --git a/configs/stm32mp15_basic_defconfig b/configs/stm32mp15_basic_defconfig
index c72a440dff1d..e955a4279c33 100644
--- a/configs/stm32mp15_basic_defconfig
+++ b/configs/stm32mp15_basic_defconfig
@@ -23,6 +23,8 @@  CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
 CONFIG_CMD_PMIC=y
 CONFIG_CMD_REGULATOR=y
 CONFIG_CMD_EXT4_WRITE=y
@@ -31,6 +33,8 @@  CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_STM32F7=y
 CONFIG_DM_MMC=y
 CONFIG_STM32_SDMMC2=y
+CONFIG_PHY=y
+CONFIG_PHY_STM32_USBPHYC=y
 # CONFIG_PINCTRL_FULL is not set
 # CONFIG_SPL_PINCTRL_FULL is not set
 CONFIG_DM_PMIC=y
@@ -42,3 +46,15 @@  CONFIG_DM_REGULATOR_GPIO=y
 CONFIG_DM_REGULATOR_STM32_VREFBUF=y
 CONFIG_DM_REGULATOR_STPMU1=y
 CONFIG_STM32_SERIAL=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_DWC2=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="STMicroelectronics"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0483
+CONFIG_USB_GADGET_PRODUCT_NUM=0x5720
+CONFIG_USB_GADGET_DWC2_OTG=y
+CONFIG_USB_GADGET_DOWNLOAD=y