diff mbox series

[v3,3/3] arm: dts: ls1021a: Enable I2C DMA support

Message ID 20180809123207.9732-4-esben.haabendal@gmail.com
State Superseded
Headers show
Series i2c: imx: Fix and enable DMA support for LS1021A | expand

Commit Message

Esben Haabendal Aug. 9, 2018, 12:32 p.m. UTC 
From: Esben Haabendal <eha@deif.com>

Gives substantial performance improvement for transfers larger than 16
bytes (DMA_THRESHOLD).  Smaller transfers are unaffected.

Signed-off-by: Esben Haabendal <eha@deif.com>
---
 arch/arm/boot/dts/ls1021a.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

Comments

Shawn Guo Aug. 27, 2018, 6:51 a.m. UTC | #1 
On Thu, Aug 09, 2018 at 02:32:07PM +0200, Esben Haabendal wrote:
> From: Esben Haabendal <eha@deif.com>
> 
> Gives substantial performance improvement for transfers larger than 16
> bytes (DMA_THRESHOLD).  Smaller transfers are unaffected.
> 
> Signed-off-by: Esben Haabendal <eha@deif.com>

Applied, thanks.
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index c55d479971cc..1e5640701c65 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -363,6 +363,8 @@ 
 			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "i2c";
 			clocks = <&clockgen 4 1>;
+			dma-names = "tx", "rx";
+			dmas = <&edma0 1 39>, <&edma0 1 38>;
 			status = "disabled";
 		};
 
@@ -374,6 +376,8 @@ 
 			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "i2c";
 			clocks = <&clockgen 4 1>;
+			dma-names = "tx", "rx";
+			dmas = <&edma0 1 37>, <&edma0 1 36>;
 			status = "disabled";
 		};
 
@@ -385,6 +389,8 @@ 
 			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "i2c";
 			clocks = <&clockgen 4 1>;
+			dma-names = "tx", "rx";
+			dmas = <&edma0 1 35>, <&edma0 1 34>;
 			status = "disabled";
 		};