| Message ID | 20180808173128.6400-1-kieran.bingham@ideasonboard.com |
|---|---|
| State | Superseded, archived |
| Headers | show |
| Series | dt-bindings: media: adv748x: Document secondary addresses | expand |
Hi Kieran, Thank you for the patch. On Wednesday, 8 August 2018 20:31:28 EEST Kieran Bingham wrote: > The ADV748x supports configurable slave addresses for its I2C pages. > Document the page names, and example for setting each of the pages > excplicitly. > > Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> > --- > .../devicetree/bindings/media/i2c/adv748x.txt | 10 +++++++++- > 1 file changed, 9 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/media/i2c/adv748x.txt > b/Documentation/devicetree/bindings/media/i2c/adv748x.txt index > 21ffb5ed8183..9515d8ad0e31 100644 > --- a/Documentation/devicetree/bindings/media/i2c/adv748x.txt > +++ b/Documentation/devicetree/bindings/media/i2c/adv748x.txt > @@ -18,6 +18,11 @@ Optional Properties: > "intrq3". All interrupts are optional. The "intrq3" interrupt > is only available on the adv7481 > - interrupts: Specify the interrupt lines for the ADV748x > + - reg-names : Names of maps with programmable addresses. > + It can contain any map needed a non-default address. s/can contain any map needed/shall contain all maps needing/ > + Possible map names are: > + "main", "dpll", "cp", "hdmi", "edid", "repeater", > + "infoframe", "cbus", "cec", "sdp", "txa", "txb" Should you also update the description of the reg property, possibly with the same text as the adv7604 bindings ? > The device node must contain one 'port' child node per device input and > output port, in accordance with the video interface bindings defined in > @@ -47,7 +52,10 @@ Example: > > video-receiver@70 { > compatible = "adi,adv7482"; > - reg = <0x70>; > + reg = <0x70 0x71 0x72 0x73 0x74 0x75 > + 0x60 0x61 0x62 0x63 0x64 0x65>; > + reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater", > + "infoframe", "cbus", "cec", "sdp", "txa", "txb"; > > #address-cells = <1>; > #size-cells = <0>;
Hi Laurent, On 08/08/18 23:59, Laurent Pinchart wrote: > Hi Kieran, > > Thank you for the patch. > > On Wednesday, 8 August 2018 20:31:28 EEST Kieran Bingham wrote: >> The ADV748x supports configurable slave addresses for its I2C pages. >> Document the page names, and example for setting each of the pages >> excplicitly. s/excplicitly/explicitly/ >> >> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> >> --- >> .../devicetree/bindings/media/i2c/adv748x.txt | 10 +++++++++- >> 1 file changed, 9 insertions(+), 1 deletion(-) >> >> diff --git a/Documentation/devicetree/bindings/media/i2c/adv748x.txt >> b/Documentation/devicetree/bindings/media/i2c/adv748x.txt index >> 21ffb5ed8183..9515d8ad0e31 100644 >> --- a/Documentation/devicetree/bindings/media/i2c/adv748x.txt >> +++ b/Documentation/devicetree/bindings/media/i2c/adv748x.txt >> @@ -18,6 +18,11 @@ Optional Properties: >> "intrq3". All interrupts are optional. The "intrq3" interrupt >> is only available on the adv7481 >> - interrupts: Specify the interrupt lines for the ADV748x >> + - reg-names : Names of maps with programmable addresses. >> + It can contain any map needed a non-default address. > > s/can contain any map needed/shall contain all maps needing/ > >> + Possible map names are: >> + "main", "dpll", "cp", "hdmi", "edid", "repeater", >> + "infoframe", "cbus", "cec", "sdp", "txa", "txb" > > Should you also update the description of the reg property, possibly with the > same text as the adv7604 bindings ? Ah yes - I had missed this part which should be added: - reg: I2C slave addresses The ADV748xx has up to twelve 256-byte maps that can be accessed via the main I2C ports. Each map has it own I2C address and acts as a standard slave device on the I2C bus. The main address is mandatory, others are optional and revert to defaults if not specified. >> The device node must contain one 'port' child node per device input and >> output port, in accordance with the video interface bindings defined in >> @@ -47,7 +52,10 @@ Example: >> >> video-receiver@70 { >> compatible = "adi,adv7482"; >> - reg = <0x70>; >> + reg = <0x70 0x71 0x72 0x73 0x74 0x75 >> + 0x60 0x61 0x62 0x63 0x64 0x65>; >> + reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater", >> + "infoframe", "cbus", "cec", "sdp", "txa", "txb"; >> >> #address-cells = <1>; >> #size-cells = <0>; >
diff --git a/Documentation/devicetree/bindings/media/i2c/adv748x.txt b/Documentation/devicetree/bindings/media/i2c/adv748x.txt index 21ffb5ed8183..9515d8ad0e31 100644 --- a/Documentation/devicetree/bindings/media/i2c/adv748x.txt +++ b/Documentation/devicetree/bindings/media/i2c/adv748x.txt @@ -18,6 +18,11 @@ Optional Properties: "intrq3". All interrupts are optional. The "intrq3" interrupt is only available on the adv7481 - interrupts: Specify the interrupt lines for the ADV748x + - reg-names : Names of maps with programmable addresses. + It can contain any map needed a non-default address. + Possible map names are: + "main", "dpll", "cp", "hdmi", "edid", "repeater", + "infoframe", "cbus", "cec", "sdp", "txa", "txb" The device node must contain one 'port' child node per device input and output port, in accordance with the video interface bindings defined in @@ -47,7 +52,10 @@ Example: video-receiver@70 { compatible = "adi,adv7482"; - reg = <0x70>; + reg = <0x70 0x71 0x72 0x73 0x74 0x75 + 0x60 0x61 0x62 0x63 0x64 0x65>; + reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater", + "infoframe", "cbus", "cec", "sdp", "txa", "txb"; #address-cells = <1>; #size-cells = <0>;
The ADV748x supports configurable slave addresses for its I2C pages. Document the page names, and example for setting each of the pages excplicitly. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> --- .../devicetree/bindings/media/i2c/adv748x.txt | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)