From patchwork Tue Aug 7 10:38:14 2018 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Tali Perry X-Patchwork-Id: 954453 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Received: from lists.ozlabs.org (lists.ozlabs.org [IPv6:2401:3900:2:1::3]) (using TLSv1.2 with cipher ADH-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by ozlabs.org (Postfix) with ESMTPS id 41lB014wS5z9s3x for ; Tue, 7 Aug 2018 20:41:37 +1000 (AEST) Authentication-Results: ozlabs.org; dmarc=fail (p=none dis=none) header.from=gmail.com Received: from lists.ozlabs.org (lists.ozlabs.org [IPv6:2401:3900:2:1::3]) by lists.ozlabs.org (Postfix) with ESMTP id 41lB013mtQzDqZC for ; Tue, 7 Aug 2018 20:41:37 +1000 (AEST) Authentication-Results: lists.ozlabs.org; dmarc=fail (p=none dis=none) header.from=gmail.com X-Original-To: openbmc@lists.ozlabs.org Delivered-To: openbmc@lists.ozlabs.org Authentication-Results: lists.ozlabs.org; spf=none (mailfrom) smtp.mailfrom=nuvoton.com (client-ip=212.199.177.27; helo=herzl.nuvoton.co.il; envelope-from=tali.perry@nuvoton.com; receiver=) Authentication-Results: lists.ozlabs.org; dmarc=fail (p=none dis=none) header.from=gmail.com Received: from herzl.nuvoton.co.il (212.199.177.27.static.012.net.il [212.199.177.27]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by lists.ozlabs.org (Postfix) with ESMTPS id 41l9yG0r5DzDqBx for ; Tue, 7 Aug 2018 20:40:05 +1000 (AEST) Received: from taln60.nuvoton.co.il (ntil-fw [212.199.177.25]) by herzl.nuvoton.co.il (8.13.8/8.13.8) with ESMTP id w77A8r1T002108; Tue, 7 Aug 2018 13:08:53 +0300 Received: by taln60.nuvoton.co.il (Postfix, from userid 20088) id C100962EDE; Tue, 7 Aug 2018 13:38:52 +0300 (IDT) From: Tali Perry To: sboyd@kernel.org, brendanhiggins@google.com, robh+dt@kernel.org, mark.rutland@arm.com, linux@armlinux.org.uk, weiyongjunl@huawei.com, avifishman70@gmail.com, tmaimon77@gmail.com, raltherr@google.com Subject: [PATCH v2 2/2] i2c: npcm7xx: add i2c controller master mode only Date: Tue, 7 Aug 2018 13:38:14 +0300 Message-Id: <20180807103814.29586-3-tali.perry1@gmail.com> X-Mailer: git-send-email 2.14.1 In-Reply-To: <20180807103814.29586-1-tali.perry1@gmail.com> References: <20180807103814.29586-1-tali.perry1@gmail.com> X-BeenThere: openbmc@lists.ozlabs.org X-Mailman-Version: 2.1.27 Precedence: list List-Id: Development list for OpenBMC List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: devicetree@vger.kernel.org, openbmc@lists.ozlabs.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Tali Perry Errors-To: openbmc-bounces+incoming=patchwork.ozlabs.org@lists.ozlabs.org Sender: "openbmc" Nuvoton NPCM7XX I2C Controller NPCM7xx includes 16 I2C contollers. THis driver operates the controller. This module also includes a slave mode, which will be submitted later on. Any feedback would be appreciated. v2 -> v1: - run check patch in strict mode. - use linux crc. - define regs in constant offset without base. - remove debug prints. - no declerations for local functions. v1: initial version Signed-off-by: Tali Perry --- drivers/i2c/busses/Kconfig | 11 + drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-npcm7xx.c | 2017 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 2029 insertions(+) create mode 100644 drivers/i2c/busses/i2c-npcm7xx.c diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 4f8df2ec87b1..692ce1568fb0 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -742,6 +742,17 @@ config I2C_NOMADIK I2C interface from ST-Ericsson's Nomadik and Ux500 architectures, as well as the STA2X11 PCIe I/O HUB. +config I2C_NPCM7XX + tristate "Nuvoton I2C Controller" + depends on ARCH_NPCM7XX + select I2C_SLAVE + help + If you say yes to this option, support will be included for the + Nuvoton I2C controller. + + This driver can also be built as a module. If so, the module + will be called i2c-npcm7xx. + config I2C_OCORES tristate "OpenCores I2C Controller" help diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 5a869144a0c5..80d4ec8908e1 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -74,6 +74,7 @@ obj-$(CONFIG_I2C_MT65XX) += i2c-mt65xx.o obj-$(CONFIG_I2C_MV64XXX) += i2c-mv64xxx.o obj-$(CONFIG_I2C_MXS) += i2c-mxs.o obj-$(CONFIG_I2C_NOMADIK) += i2c-nomadik.o +obj-$(CONFIG_I2C_NPCM7XX) += i2c-npcm7xx.o obj-$(CONFIG_I2C_OCORES) += i2c-ocores.o obj-$(CONFIG_I2C_OMAP) += i2c-omap.o obj-$(CONFIG_I2C_PASEMI) += i2c-pasemi.o diff --git a/drivers/i2c/busses/i2c-npcm7xx.c b/drivers/i2c/busses/i2c-npcm7xx.c new file mode 100644 index 000000000000..9e639ced50b1 --- /dev/null +++ b/drivers/i2c/busses/i2c-npcm7xx.c @@ -0,0 +1,2017 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Nuvoton NPCM7xx SMB Controller driver + * + * Copyright (C) 2018 Nuvoton Technologies tali.perry@nuvoton.com + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define I2C_VERSION "0.0.3" + +enum smb_mode { + SMB_SLAVE = 1, + SMB_MASTER +}; + +/* + * External SMB Interface driver xfer indication values, which indicate status + * of the bus. + */ +enum smb_state_ind { + SMB_NO_STATUS_IND = 0, + SMB_SLAVE_RCV_IND = 1, + SMB_SLAVE_XMIT_IND = 2, + SMB_SLAVE_XMIT_MISSING_DATA_IND = 3, + SMB_SLAVE_RESTART_IND = 4, + SMB_SLAVE_DONE_IND = 5, + SMB_MASTER_DONE_IND = 6, + SMB_NO_DATA_IND = 7, + SMB_NACK_IND = 8, + SMB_BUS_ERR_IND = 9, + SMB_WAKE_UP_IND = 10, + SMB_MASTER_PEC_ERR_IND = 11, + SMB_BLOCK_BYTES_ERR_IND = 12, + SMB_SLAVE_PEC_ERR_IND = 13, + SMB_SLAVE_RCV_MISSING_DATA_IND = 14, +}; + +// SMBus Operation type values +enum smb_oper { + SMB_NO_OPER = 0, + SMB_WRITE_OPER = 1, + SMB_READ_OPER = 2 +}; + +// SMBus Bank (FIFO mode) +enum smb_bank { + SMB_BANK_0 = 0, + SMB_BANK_1 = 1 +}; + +// Internal SMB states values (for the SMB module state machine). +enum smb_state { + SMB_DISABLE = 0, + SMB_IDLE, + SMB_MASTER_START, + SMB_SLAVE_MATCH, + SMB_OPER_STARTED, + SMB_REPEATED_START, + SMB_STOP_PENDING +}; + +// Module supports setting multiple own slave addresses: +enum smb_addr { + SMB_SLAVE_ADDR1 = 0, + SMB_SLAVE_ADDR2, + SMB_SLAVE_ADDR3, + SMB_SLAVE_ADDR4, + SMB_SLAVE_ADDR5, + SMB_SLAVE_ADDR6, + SMB_SLAVE_ADDR7, + SMB_SLAVE_ADDR8, + SMB_SLAVE_ADDR9, + SMB_SLAVE_ADDR10, + SMB_GC_ADDR, + SMB_ARP_ADDR +}; + +// global regs +static struct regmap *gcr_regmap; +static struct regmap *clk_regmap; + +#define NPCM_I2CSEGCTL 0xE4 +#define NPCM_SECCNT 0x68 +#define NPCM_CNTR25M 0x6C +#define I2CSEGCTL_VAL 0x0333F000 + +// Common regs +#define NPCM_SMBSDA 0x000 +#define NPCM_SMBST 0x002 +#define NPCM_SMBCST 0x004 +#define NPCM_SMBCTL1 0x006 +#define NPCM_SMBADDR1 0x008 +#define NPCM_SMBCTL2 0x00A +#define NPCM_SMBADDR2 0x00C +#define NPCM_SMBCTL3 0x00E +#define NPCM_SMBCST2 0x018 +#define NPCM_SMBCST3 0x019 +#define SMB_VER 0x01F + +// BANK 0 regs +#define NPCM_SMBADDR3 0x010 +#define NPCM_SMBADDR7 0x011 +#define NPCM_SMBADDR4 0x012 +#define NPCM_SMBADDR8 0x013 +#define NPCM_SMBADDR5 0x014 +#define NPCM_SMBADDR9 0x015 +#define NPCM_SMBADDR6 0x016 +#define NPCM_SMBADDR10 0x017 + +// SMBADDR array: because the addr regs are sprincled all over the address space +const int NPCM_SMBADDR[10] = {NPCM_SMBADDR1, NPCM_SMBADDR2, NPCM_SMBADDR3, + NPCM_SMBADDR4, NPCM_SMBADDR5, NPCM_SMBADDR6, + NPCM_SMBADDR7, NPCM_SMBADDR8, NPCM_SMBADDR9, + NPCM_SMBADDR10}; + +#define NPCM_SMBCTL4 0x01A +#define NPCM_SMBCTL5 0x01B +#define NPCM_SMBSCLLT 0x01C // SCL Low Time +#define NPCM_SMBFIF_CTL 0x01D // FIFO Control +#define NPCM_SMBSCLHT 0x01E // SCL High Time + +// BANK 1 regs +#define NPCM_SMBFIF_CTS 0x010 // FIFO Control +#define NPCM_SMBTXF_CTL 0x012 // Tx-FIFO Control +#define NPCM_SMBT_OUT 0x014 // Bus T.O. +#define NPCM_SMBPEC 0x016 // PEC Data +#define NPCM_SMBTXF_STS 0x01A // Tx-FIFO Status +#define NPCM_SMBRXF_STS 0x01C // Rx-FIFO Status +#define NPCM_SMBRXF_CTL 0x01E // Rx-FIFO Control + +// NPCM_SMBST reg fields +#define NPCM_SMBST_XMIT BIT(0) +#define NPCM_SMBST_MASTER BIT(1) +#define NPCM_SMBST_NMATCH BIT(2) +#define NPCM_SMBST_STASTR BIT(3) +#define NPCM_SMBST_NEGACK BIT(4) +#define NPCM_SMBST_BER BIT(5) +#define NPCM_SMBST_SDAST BIT(6) +#define NPCM_SMBST_SLVSTP BIT(7) + +// NPCM_SMBCST reg fields +#define NPCM_SMBCST_BUSY BIT(0) +#define NPCM_SMBCST_BB BIT(1) +#define NPCM_SMBCST_MATCH BIT(2) +#define NPCM_SMBCST_GCMATCH BIT(3) +#define NPCM_SMBCST_TSDA BIT(4) +#define NPCM_SMBCST_TGSCL BIT(5) +#define NPCM_SMBCST_MATCHAF BIT(6) +#define NPCM_SMBCST_ARPMATCH BIT(7) + +// NPCM_SMBCTL1 reg fields +#define NPCM_SMBCTL1_START BIT(0) +#define NPCM_SMBCTL1_STOP BIT(1) +#define NPCM_SMBCTL1_INTEN BIT(2) +#define NPCM_SMBCTL1_EOBINTE BIT(3) +#define NPCM_SMBCTL1_ACK BIT(4) +#define NPCM_SMBCTL1_GCMEN BIT(5) +#define NPCM_SMBCTL1_NMINTE BIT(6) +#define NPCM_SMBCTL1_STASTRE BIT(7) + +// RW1S fields (inside a RW reg): +#define NPCM_SMBCTL1_RWS_FIELDS (NPCM_SMBCTL1_START | NPCM_SMBCTL1_STOP | \ + NPCM_SMBCTL1_ACK) +// NPCM_SMBADDR reg fields +#define NPCM_SMBADDR_ADDR GENMASK(6, 0) +#define NPCM_SMBADDR_SAEN BIT(7) + +// NPCM_SMBCTL2 reg fields +#define SMBCTL2_ENABLE BIT(0) +#define SMBCTL2_SCLFRQ6_0 GENMASK(7, 1) + +// NPCM_SMBCTL3 reg fields +#define SMBCTL3_SCLFRQ8_7 GENMASK(1, 0) +#define SMBCTL3_ARPMEN BIT(2) +#define SMBCTL3_IDL_START BIT(3) +#define SMBCTL3_400K_MODE BIT(4) +#define SMBCTL3_BNK_SEL BIT(5) +#define SMBCTL3_SDA_LVL BIT(6) +#define SMBCTL3_SCL_LVL BIT(7) + +// NPCM_SMBCST2 reg fields +#define NPCM_SMBCST2_MATCHA1F BIT(0) +#define NPCM_SMBCST2_MATCHA2F BIT(1) +#define NPCM_SMBCST2_MATCHA3F BIT(2) +#define NPCM_SMBCST2_MATCHA4F BIT(3) +#define NPCM_SMBCST2_MATCHA5F BIT(4) +#define NPCM_SMBCST2_MATCHA6F BIT(5) +#define NPCM_SMBCST2_MATCHA7F BIT(5) +#define NPCM_SMBCST2_INTSTS BIT(7) + +// NPCM_SMBCST3 reg fields +#define NPCM_SMBCST3_MATCHA8F BIT(0) +#define NPCM_SMBCST3_MATCHA9F BIT(1) +#define NPCM_SMBCST3_MATCHA10F BIT(2) +#define NPCM_SMBCST3_EO_BUSY BIT(7) + +// NPCM_SMBCTL4 reg fields +#define SMBCTL4_HLDT GENMASK(5, 0) +#define SMBCTL4_LVL_WE BIT(7) + +// NPCM_SMBCTL5 reg fields +#define SMBCTL5_DBNCT GENMASK(3, 0) + +// NPCM_SMBFIF_CTS reg fields +#define NPCM_SMBFIF_CTS_RXF_TXE BIT(1) +#define NPCM_SMBFIF_CTS_RFTE_IE BIT(3) +#define NPCM_SMBFIF_CTS_CLR_FIFO BIT(6) +#define NPCM_SMBFIF_CTS_SLVRSTR BIT(7) + +// NPCM_SMBTXF_CTL reg fields +#ifdef SMB_CAPABILITY_32B_FIFO +#define NPCM_SMBTXF_CTL_TX_THR GENMASK(5, 0) +#else +#define NPCM_SMBTXF_CTL_TX_THR GENMASK(4, 0) +#endif +#define NPCM_SMBTXF_CTL_THR_TXIE BIT(6) + +// NPCM_SMBT_OUT reg fields +#define NPCM_SMBT_OUT_TO_CKDIV GENMASK(5, 0) +#define NPCM_SMBT_OUT_T_OUTIE BIT(6) +#define NPCM_SMBT_OUT_T_OUTST BIT(7) + +// NPCM_SMBTXF_STS reg fields +#ifdef SMB_CAPABILITY_32B_FIFO +#define NPCM_SMBTXF_STS_TX_BYTES GENMASK(5, 0) +#else +#define NPCM_SMBTXF_STS_TX_BYTES GENMASK(4, 0) +#endif +#define NPCM_SMBTXF_STS_TX_THST BIT(6) + +// NPCM_SMBRXF_STS reg fields +#ifdef SMB_CAPABILITY_32B_FIFO +#define NPCM_SMBRXF_STS_RX_BYTES GENMASK(5, 0) +#else +#define NPCM_SMBRXF_STS_RX_BYTES GENMASK(4, 0) +#endif +#define NPCM_SMBRXF_STS_RX_THST BIT(6) + +// NPCM_SMBFIF_CTL reg fields +#define NPCM_SMBFIF_CTL_FIFO_EN BIT(4) + +// NPCM_SMBRXF_CTL reg fields +// Note: on the next HW version of this module, this HW is about to switch to +// 32 bytes FIFO. This size will be set using a config. +// on current version 16 bytes FIFO is set using a define +#ifdef SMB_CAPABILITY_32B_FIFO +#define NPCM_SMBRXF_CTL_RX_THR GENMASK(5, 0) +#define NPCM_SMBRXF_CTL_THR_RXIE BIT(6) +#define NPCM_SMBRXF_CTL_LAST_PEC BIT(7) +#define SMBUS_FIFO_SIZE 32 +#else +#define NPCM_SMBRXF_CTL_RX_THR GENMASK(4, 0) +#define NPCM_SMBRXF_CTL_LAST_PEC BIT(5) +#define NPCM_SMBRXF_CTL_THR_RXIE BIT(6) +#define SMBUS_FIFO_SIZE 16 +#endif + +// SMB_VER reg fields +#define SMB_VER_VERSION GENMASK(6, 0) +#define SMB_VER_FIFO_EN BIT(7) + +// stall/stuck timeout +const unsigned int DEFAULT_STALL_COUNT = 25; + +// Data abort timeout +const unsigned int ABORT_TIMEOUT = 1000; + +// SMBus spec. values in KHZ +const unsigned int SMBUS_FREQ_MIN = 10; +const unsigned int SMBUS_FREQ_MAX = 1000; +const unsigned int SMBUS_FREQ_100KHZ = 100; +const unsigned int SMBUS_FREQ_400KHZ = 400; +const unsigned int SMBUS_FREQ_1MHZ = 1000; + +// SCLFRQ min/max field values +const unsigned int SCLFRQ_MIN = 10; +const unsigned int SCLFRQ_MAX = 511; + +// SCLFRQ field position +#define SCLFRQ_0_TO_6 GENMASK(6, 0) +#define SCLFRQ_7_TO_8 GENMASK(8, 7) + +// SMB Maximum Retry Trials (on Bus Arbitration Loss) +const unsigned int SMB_RETRY_MAX_COUNT = 2; +const unsigned int SMB_NUM_OF_ADDR = 10; + +// for logging: +#define NPCM_I2C_EVENT_START BIT(0) +#define NPCM_I2C_EVENT_STOP BIT(1) +#define NPCM_I2C_EVENT_ABORT BIT(2) +#define NPCM_I2C_EVENT_WRITE BIT(3) +#define NPCM_I2C_EVENT_READ BIT(4) +#define NPCM_I2C_EVENT_BER BIT(5) +#define NPCM_I2C_EVENT_NACK BIT(6) +#define NPCM_I2C_EVENT_TO BIT(7) +#define NPCM_I2C_EVENT_EOB BIT(8) + +#define NPCM_I2C_EVENT_LOG(event) (bus->event_log |= event) + +#define SMB_RECOVERY_SUPPORT + +// slave mode: if end device reads more data than available, ask issuer or +// request for more data: +#define SMB_WRAP_AROUND_BUFFER + +// Status of one SMBus module +struct npcm_i2c { + struct i2c_adapter adap; + struct device *dev; + unsigned char __iomem *reg; + spinlock_t lock; /* IRQ synchronization */ + struct completion cmd_complete; + int irq; + int cmd_err; + struct i2c_msg *msgs; + int msgs_num; + int num; + u32 apb_clk; + enum smb_state state; + enum smb_oper operation; + enum smb_mode master_or_slave; + enum smb_state_ind stop_ind; + u8 dest_addr; + u8 *rd_buf; + u16 rd_size; + u16 rd_ind; + u8 *wr_buf; + u16 wr_size; + u16 wr_ind; + bool fifo_use; + u8 threshold_fifo; + + // PEC bit mask per slave address. + // 1: use PEC for this address, + // 0: do not use PEC for this address + u16 PEC_mask; + bool PEC_use; + u8 crc_data; + bool read_block_use; + u8 retry_count; + u8 int_cnt; + u32 event_log; + u32 clk_period_us; + u32 int_time_stamp[2]; +}; + +static inline void _npcm7xx_get_time_stamp(u32 *time_quad0, u32 *time_quad1) +{ + u32 seconds, seconds_last; + u32 ref_clock; + + regmap_read(clk_regmap, NPCM_SECCNT, &seconds_last); + + do { + regmap_read(clk_regmap, NPCM_SECCNT, &seconds); + regmap_read(clk_regmap, NPCM_CNTR25M, &ref_clock); + regmap_read(clk_regmap, NPCM_SECCNT, &seconds_last); + } while (seconds_last != seconds); + + *time_quad0 = ref_clock; + *time_quad1 = seconds; +} + +#define EXT_CLOCK_FREQUENCY_MHZ 25 +#define CNTR25M_ACCURECY EXT_CLOCK_FREQUENCY_MHZ // minimum accurecy + +// Function: _npcm7xx_delay_relative +// Parameters: +// us_delay - number of microseconds to delay since t0_time. +// if zero: no delay. +// +// t0_time - start time , to measure time from. +// get a time stamp, delay us_delay from it. If us_delay has already passed +// since the time stamp , then no delay is executed. returns the time elapsed +// since t0_time + +static inline u32 _npcm7xx_delay_relative(u32 us_delay, u32 t0_time0, + u32 t0_time1) +{ + u32 t1_time_0, t1_time_1; + u32 time_elapsed; + u32 minimum_delay = (us_delay * EXT_CLOCK_FREQUENCY_MHZ) + + CNTR25M_ACCURECY; + + // this is equivalent to microSec/0.64 + minimal tic length. + do { + _npcm7xx_get_time_stamp(&t1_time_0, &t1_time_1); + time_elapsed = ((EXT_CLOCK_FREQUENCY_MHZ * 1000000) * + (t1_time_1 - t0_time1)) + + (t1_time_0 - t0_time0); + } while (time_elapsed < minimum_delay); + + // return elapsed time + return (u32)(time_elapsed / EXT_CLOCK_FREQUENCY_MHZ); +} + +static inline void npcm_smb_select_bank(struct npcm_i2c *bus, + enum smb_bank bank) +{ + if (bus->fifo_use) + iowrite8((ioread8(bus->reg + NPCM_SMBCTL3) & ~SMBCTL3_BNK_SEL) | + FIELD_PREP(SMBCTL3_BNK_SEL, bank), + bus->reg + NPCM_SMBCTL3); +} + +DECLARE_CRC8_TABLE(npcm7xx_crc8); + +static u8 npcm_smb_calc_crc8(u8 crc_data, u8 data) +{ + crc_data = crc8(npcm7xx_crc8, &data, 1, crc_data); + return crc_data; +} + +static void npcm_smb_calc_PEC(struct npcm_i2c *bus, u8 data) +{ + if (bus->PEC_use) + bus->crc_data = npcm_smb_calc_crc8(bus->crc_data, data); +} + +static inline void npcm_smb_wr_byte(struct npcm_i2c *bus, u8 data) +{ + iowrite8(data, bus->reg + NPCM_SMBSDA); + npcm_smb_calc_PEC(bus, data); +} + +static inline void npcm_smb_rd_byte(struct npcm_i2c *bus, u8 *data) +{ + *data = ioread8(bus->reg + NPCM_SMBSDA); + npcm_smb_calc_PEC(bus, *data); +} + +static inline u8 npcm_smb_get_PEC(struct npcm_i2c *bus) +{ + if (bus->PEC_use) + return bus->crc_data; + else + return 0; +} + +static inline void npcm_smb_write_PEC(struct npcm_i2c *bus) +{ + if (bus->PEC_use) { + // get PAC value and write to the bus: + npcm_smb_wr_byte(bus, npcm_smb_get_PEC(bus)); + } +} + +// +// NPCM7XX SMB module allows writing to SCL and SDA pins directly +// without the need to change muxing of pins. +// This feature will be used for recovery sequences i.e. +// +static void npcm_smb_set_SCL(struct i2c_adapter *_adap, int level) +{ +#ifdef SMB_CAPABILITY_FORCE_SCL_SDA + unsigned long flags; + struct npcm_i2c *bus = container_of(_adap, struct npcm_i2c, adap); + + // Select Bank 0 to access NPCM_SMBCTL4 + spin_lock_irqsave(&bus->lock, flags); + npcm_smb_select_bank(bus, SMB_BANK_0); + + // Set SCL_LVL, SDA_LVL bits as Read/Write (R/W) + iowrite8(ioread8(bus->reg + NPCM_SMBCTL4) | SMBCTL4_LVL_WE, + bus->reg + NPCM_SMBCTL4); + + // Set level + iowrite8((ioread8(bus->reg + NPCM_SMBCTL3) + & ~SMBCTL3_SCL_LVL) | FIELD_PREP(SMBCTL3_SCL_LVL, + level), bus->reg + NPCM_SMBCTL3); + + // Set SCL_LVL, SDA_LVL bits as Read Only (RO) + iowrite8(ioread8(bus->reg + NPCM_SMBCTL4) + & ~SMBCTL4_LVL_WE, bus->reg + NPCM_SMBCTL4); + + // Return to Bank 1 + npcm_smb_select_bank(bus, SMB_BANK_1); + spin_unlock_irqrestore(&bus->lock, flags); +#endif +} + +static int npcm_smb_get_SCL(struct i2c_adapter *_adap) +{ + unsigned long flags; + unsigned int ret = 0; + struct npcm_i2c *bus = container_of(_adap, struct npcm_i2c, adap); + + // Select Bank 0 to access NPCM_SMBCTL4 + spin_lock_irqsave(&bus->lock, flags); + npcm_smb_select_bank(bus, SMB_BANK_0); + + // Get SCL level + ret = FIELD_GET(SMBCTL3_SCL_LVL, ioread8(bus->reg + NPCM_SMBCTL3)); + + // Return to Bank 1 + npcm_smb_select_bank(bus, SMB_BANK_1); + spin_unlock_irqrestore(&bus->lock, flags); + return ret; +} + +static int npcm_smb_get_SDA(struct i2c_adapter *_adap) +{ + unsigned long flags; + unsigned int ret = 0; + struct npcm_i2c *bus = container_of(_adap, struct npcm_i2c, adap); + + // Select Bank 0 to access NPCM_SMBCTL4 + spin_lock_irqsave(&bus->lock, flags); + npcm_smb_select_bank(bus, SMB_BANK_0); + + // Get SDA level + ret = FIELD_GET(SMBCTL3_SDA_LVL, ioread8(bus->reg + NPCM_SMBCTL3)); + + // Return to Bank 1 + npcm_smb_select_bank(bus, SMB_BANK_1); + spin_unlock_irqrestore(&bus->lock, flags); + return ret; +} + +static inline u16 npcm_smb_get_index(struct npcm_i2c *bus) +{ + u16 index = 0; + + if (bus->operation == SMB_READ_OPER) + index = bus->rd_ind; + else if (bus->operation == SMB_WRITE_OPER) + index = bus->wr_ind; + + return index; +} + +// quick protocol: +static inline bool npcm_smb_is_quick(struct npcm_i2c *bus) +{ + if (bus->wr_size == 0 && bus->rd_size == 0) + return true; + return false; +} + +static void npcm_smb_disable(struct npcm_i2c *bus) +{ + int i; + + // select bank 0 for SMB addresses + npcm_smb_select_bank(bus, SMB_BANK_0); + + // Slave Addresses Removal + for (i = SMB_SLAVE_ADDR1; i < SMB_NUM_OF_ADDR; i++) + iowrite8(0, bus->reg + NPCM_SMBADDR[i]); + + // select bank 0 for SMB addresses + npcm_smb_select_bank(bus, SMB_BANK_1); + + // Disable module. + iowrite8(ioread8(bus->reg + NPCM_SMBCTL2) & ~SMBCTL2_ENABLE, + bus->reg + NPCM_SMBCTL2); + + // Set module disable + bus->state = SMB_DISABLE; +} + +static void npcm_smb_enable(struct npcm_i2c *bus) +{ + iowrite8((ioread8(bus->reg + NPCM_SMBCTL2) | SMBCTL2_ENABLE), + bus->reg + NPCM_SMBCTL2); +} + +// enable\disable end of busy (EOB) interrupt +static inline void npcm_smb_eob_int(struct npcm_i2c *bus, bool enable) +{ + if (enable) { + iowrite8((ioread8(bus->reg + NPCM_SMBCTL1) | + NPCM_SMBCTL1_EOBINTE) & ~NPCM_SMBCTL1_RWS_FIELDS, + bus->reg + NPCM_SMBCTL1); + } else { + iowrite8(ioread8(bus->reg + NPCM_SMBCTL1) & + ~NPCM_SMBCTL1_EOBINTE & ~NPCM_SMBCTL1_RWS_FIELDS, + bus->reg + NPCM_SMBCTL1); + + // Clear EO_BUSY pending bit: + iowrite8(ioread8(bus->reg + NPCM_SMBCST3) | + NPCM_SMBCST3_EO_BUSY, bus->reg + NPCM_SMBCST3); + } +} + +static inline bool npcm_smb_tx_fifo_full(struct npcm_i2c *bus) +{ + // check if TX FIFO full: + return (bool)FIELD_GET(NPCM_SMBTXF_STS_TX_THST, + ioread8(bus->reg + NPCM_SMBTXF_STS)); +} + +static inline bool npcm_smb_rx_fifo_full(struct npcm_i2c *bus) +{ + // check if RX FIFO full: + return (bool)FIELD_GET(NPCM_SMBRXF_STS_RX_THST, + ioread8(bus->reg + NPCM_SMBRXF_STS)); +} + +static inline void npcm_smb_clear_tx_fifo(struct npcm_i2c *bus) +{ + // clear TX FIFO: + iowrite8(ioread8(bus->reg + NPCM_SMBTXF_STS) | + NPCM_SMBTXF_STS_TX_THST, + bus->reg + NPCM_SMBTXF_STS); +} + +static inline void npcm_smb_clear_rx_fifo(struct npcm_i2c *bus) +{ + // clear RX FIFO: + iowrite8(ioread8(bus->reg + NPCM_SMBRXF_STS) | + NPCM_SMBRXF_STS_RX_THST, + bus->reg + NPCM_SMBRXF_STS); +} + +static void npcm_smb_int_enable(struct npcm_i2c *bus, bool enable) +{ + if (enable) + iowrite8((ioread8(bus->reg + NPCM_SMBCTL1) | + NPCM_SMBCTL1_INTEN) & ~NPCM_SMBCTL1_RWS_FIELDS, + bus->reg + NPCM_SMBCTL1); + else + iowrite8((ioread8(bus->reg + NPCM_SMBCTL1) & + ~NPCM_SMBCTL1_INTEN) & ~NPCM_SMBCTL1_RWS_FIELDS, + bus->reg + NPCM_SMBCTL1); +} + +static inline void npcm_smb_master_start(struct npcm_i2c *bus) +{ + NPCM_I2C_EVENT_LOG(NPCM_I2C_EVENT_START); + + iowrite8((ioread8(bus->reg + NPCM_SMBCTL1) | NPCM_SMBCTL1_START) & + ~(NPCM_SMBCTL1_STOP | NPCM_SMBCTL1_ACK), + bus->reg + NPCM_SMBCTL1); +} + +static inline void npcm_smb_master_stop(struct npcm_i2c *bus) +{ + NPCM_I2C_EVENT_LOG(NPCM_I2C_EVENT_STOP); + + // override HW issue: SMBus may fail to supply stop condition in Master + // Write operation. + // Need to delay at least 5 us from the last int, before issueing a stop + _npcm7xx_delay_relative(5, bus->int_time_stamp[0], + bus->int_time_stamp[1]); + + iowrite8((ioread8(bus->reg + NPCM_SMBCTL1) | NPCM_SMBCTL1_STOP) & + ~(NPCM_SMBCTL1_START | NPCM_SMBCTL1_ACK), + bus->reg + NPCM_SMBCTL1); + + if (bus->fifo_use) { + npcm_smb_select_bank(bus, SMB_BANK_1); + + if (bus->operation == SMB_READ_OPER) + npcm_smb_clear_rx_fifo(bus); + else + npcm_smb_clear_tx_fifo(bus); + + iowrite8(ioread8(bus->reg + NPCM_SMBFIF_CTS) | + NPCM_SMBFIF_CTS_SLVRSTR | + NPCM_SMBFIF_CTS_RXF_TXE, + bus->reg + NPCM_SMBFIF_CTS); + + iowrite8(0, bus->reg + NPCM_SMBTXF_CTL); + } +} + +static inline void npcm_smb_abort_data(struct npcm_i2c *bus) +{ + unsigned int timeout = ABORT_TIMEOUT; + u8 data; + + NPCM_I2C_EVENT_LOG(NPCM_I2C_EVENT_ABORT); + // Generate a STOP condition + npcm_smb_master_stop(bus); + npcm_smb_rd_byte(bus, &data); + + // Clear NEGACK, STASTR and BER bits + iowrite8(NPCM_SMBST_STASTR | NPCM_SMBST_NEGACK | + NPCM_SMBST_BER, bus->reg + NPCM_SMBST); + + // Wait till STOP condition is generated + while (FIELD_GET(NPCM_SMBCTL1_STOP, ioread8(bus->reg + NPCM_SMBCTL1))) { + timeout--; + if (!FIELD_GET(NPCM_SMBCTL1_STOP, + ioread8(bus->reg + NPCM_SMBCTL1))) + break; + if (timeout <= 1) { + dev_err(bus->dev, "%s, abort timeout!\n", __func__); + break; + } + } +} + +static inline void npcm_smb_stall_after_start(struct npcm_i2c *bus, bool stall) +{ + if (stall) + iowrite8((ioread8(bus->reg + NPCM_SMBCTL1) | + NPCM_SMBCTL1_STASTRE) & ~NPCM_SMBCTL1_RWS_FIELDS, + bus->reg + NPCM_SMBCTL1); + else + iowrite8((ioread8(bus->reg + NPCM_SMBCTL1) & + ~NPCM_SMBCTL1_STASTRE) & ~NPCM_SMBCTL1_RWS_FIELDS, + bus->reg + NPCM_SMBCTL1); +} + +static inline void npcm_smb_nack(struct npcm_i2c *bus) +{ + if (bus->rd_ind < (bus->rd_size - 1)) + dev_info(bus->dev, + "\tNACK err bus%d, SA=0x%x, rd(%d\%d), op=%d st=%d\n", + bus->num, bus->dest_addr, bus->rd_ind, bus->rd_size, + bus->operation, bus->state); + iowrite8((ioread8(bus->reg + NPCM_SMBCTL1) | NPCM_SMBCTL1_ACK) & + ~(NPCM_SMBCTL1_STOP | NPCM_SMBCTL1_START), + bus->reg + NPCM_SMBCTL1); +} + +static void npcm_smb_reset(struct npcm_i2c *bus) +{ + // Save NPCM_SMBCTL1 relevant bits. It is being cleared when the + // module is disabled + u8 smbctl1 = ioread8(bus->reg + NPCM_SMBCTL1) & (NPCM_SMBCTL1_GCMEN + | NPCM_SMBCTL1_INTEN + | NPCM_SMBCTL1_NMINTE); + + // Disable the SMB module + iowrite8((ioread8(bus->reg + NPCM_SMBCTL2) & ~SMBCTL2_ENABLE), + bus->reg + NPCM_SMBCTL2); + + // Enable the SMB module + npcm_smb_enable(bus); + + // Restore NPCM_SMBCTL1 status + iowrite8(smbctl1 & ~NPCM_SMBCTL1_RWS_FIELDS, bus->reg + NPCM_SMBCTL1); + + // Reset driver status + bus->state = SMB_IDLE; + // + // Configure FIFO disabled mode so slave will not use fifo + // (master will set it on if supported) + iowrite8(ioread8(bus->reg + NPCM_SMBFIF_CTL) & + ~NPCM_SMBFIF_CTL_FIFO_EN, + bus->reg + NPCM_SMBFIF_CTL); + bus->fifo_use = false; +} + +static inline bool npcm_smb_is_master(struct npcm_i2c *bus) +{ + return (bool)FIELD_GET(NPCM_SMBST_MASTER, + ioread8(bus->reg + NPCM_SMBST)); +} + +static int npcm_smb_master_abort(struct npcm_i2c *bus) +{ + int ret = -(EIO); + + // Only current master is allowed to issue Stop Condition + if (npcm_smb_is_master(bus)) { + npcm_smb_abort_data(bus); + ret = 0; + } + + npcm_smb_reset(bus); + + return ret; +} + +static void npcm_smb_callback(struct npcm_i2c *bus, + enum smb_state_ind op_status, u16 info) +{ + struct i2c_msg *msgs = bus->msgs; + int msgs_num = bus->msgs_num; + + switch (op_status) { + case SMB_MASTER_DONE_IND: + // Master transaction finished and all transmit bytes were sent + // info: number of bytes actually received after the Master + // receive operation (if Master didn't issue receive it + // should be 0) + // Notify that not all data was received on Master or Slave + // info: + // on receive: number of actual bytes received + // when PEC is used even if 'info' is the expected number + // of bytes, it means that PEC error occurred. + { + if (msgs[0].flags & I2C_M_RD) + msgs[0].len = info; + else if (msgs_num == 2 && msgs[1].flags & I2C_M_RD) + msgs[1].len = info; + + bus->cmd_err = 0; + complete(&bus->cmd_complete); + } + break; + + case SMB_NO_DATA_IND: + // Notify that not all data was received on Master or Slave + // info: + //on receive: number of actual bytes received + // when PEC is used even if 'info' is the expected number + // of bytes,it means that PEC error occurred. + { + if (msgs[0].flags & I2C_M_RD) + msgs[0].len = info; + else if (msgs_num == 2 && msgs[1].flags & I2C_M_RD) + msgs[1].len = info; + + bus->cmd_err = -EFAULT; + complete(&bus->cmd_complete); + } + break; + case SMB_NACK_IND: + // MASTER transmit got a NAK before transmitting all bytes + // info: number of transmitted bytes + bus->cmd_err = -EAGAIN; + complete(&bus->cmd_complete); + + break; + case SMB_BUS_ERR_IND: + // Bus error + // info: has no meaning + bus->cmd_err = -EIO; + complete(&bus->cmd_complete); + break; + case SMB_WAKE_UP_IND: + // SMBus wake up + // info: has no meaning + break; + default: + break; + } +} + +static u32 npcm_smb_get_fifo_fullness(struct npcm_i2c *bus) +{ + if (bus->operation == SMB_WRITE_OPER) + return FIELD_GET(NPCM_SMBTXF_STS_TX_BYTES, + ioread8(bus->reg + NPCM_SMBTXF_STS)); + else if (bus->operation == SMB_READ_OPER) + return FIELD_GET(NPCM_SMBRXF_STS_RX_BYTES, + ioread8(bus->reg + NPCM_SMBRXF_STS)); + return 0; +} + +static void npcm_smb_write_to_fifo(struct npcm_i2c *bus, u16 max_bytes_to_send) +{ + // Fill the FIFO, while the FIFO is not full and there are more bytes to + // write + while ((max_bytes_to_send--) && (SMBUS_FIFO_SIZE - + npcm_smb_get_fifo_fullness(bus))) { + // write the data + if (bus->wr_ind < bus->wr_size) { + if (bus->PEC_use && + (bus->wr_ind + 1 == bus->wr_size) && + (bus->rd_size == 0 || + bus->master_or_slave == SMB_SLAVE)) { + // Master send PEC in write protocol, Slave send + // PEC in read protocol. + npcm_smb_write_PEC(bus); + bus->wr_ind++; + } else { + npcm_smb_wr_byte(bus, + bus->wr_buf[bus->wr_ind++]); + } + } else { +#ifdef SMB_WRAP_AROUND_BUFFER + // We're out of bytes. Ask the higher level for + // more bytes. Let it know that driver + // used all its' bytes + + npcm_smb_clear_tx_fifo(bus); + + // Reset state for the remaining bytes transaction + bus->state = SMB_SLAVE_MATCH; + + // Notify upper layer of transaction completion + npcm_smb_callback(bus, SMB_SLAVE_XMIT_MISSING_DATA_IND, + bus->wr_ind); + + iowrite8(NPCM_SMBST_SDAST, bus->reg + NPCM_SMBST); +#else + npcm_smb_wr_byte(bus, 0xFF); +#endif + } + } +} + +// configure the FIFO before using it. If nread is -1 RX FIFO will not be +// configured. same for nwrite +static void npcm_smb_set_fifo(struct npcm_i2c *bus, int nread, int nwrite) +{ + if (!bus->fifo_use) + return; + npcm_smb_select_bank(bus, SMB_BANK_1); + npcm_smb_clear_tx_fifo(bus); + npcm_smb_clear_rx_fifo(bus); + + // configure RX FIFO + if (nread > 0) { + // clear LAST bit: + iowrite8(ioread8(bus->reg + NPCM_SMBRXF_CTL) & + (~NPCM_SMBRXF_CTL_LAST_PEC), + bus->reg + NPCM_SMBRXF_CTL); + + if (nread > SMBUS_FIFO_SIZE) + iowrite8((ioread8(bus->reg + NPCM_SMBRXF_CTL) & + ~NPCM_SMBRXF_CTL_RX_THR) + | FIELD_PREP(NPCM_SMBRXF_CTL_RX_THR, + SMBUS_FIFO_SIZE), bus->reg + NPCM_SMBRXF_CTL); + else + iowrite8((ioread8(bus->reg + NPCM_SMBRXF_CTL) & + ~NPCM_SMBRXF_CTL_RX_THR) | + FIELD_PREP(NPCM_SMBRXF_CTL_RX_THR, + (u8)(nread)), + bus->reg + NPCM_SMBRXF_CTL); + + if (nread <= SMBUS_FIFO_SIZE && !bus->read_block_use) + iowrite8(ioread8(bus->reg + NPCM_SMBRXF_CTL) | + NPCM_SMBRXF_CTL_LAST_PEC, + bus->reg + NPCM_SMBRXF_CTL); + } + + // configure TX FIFO + if (nwrite > 0) { + if (nwrite > SMBUS_FIFO_SIZE) + // data to send is more then FIFO size. + // Configure the FIFO int to be mid of FIFO. + iowrite8(NPCM_SMBTXF_CTL_THR_TXIE | + (SMBUS_FIFO_SIZE / 2), + bus->reg + NPCM_SMBTXF_CTL); + else if (nwrite > (SMBUS_FIFO_SIZE / 2) && + bus->wr_ind != 0) + // wr_ind != 0 means that this is not the first + // write. since int is in the mid of FIFO, only + // half of the fifo is empty. + // Continue to configure the FIFO int to be mid + // of FIFO. + iowrite8(NPCM_SMBTXF_CTL_THR_TXIE | + (SMBUS_FIFO_SIZE / 2), + bus->reg + NPCM_SMBTXF_CTL); + else + // This is the either first write (wr_ind = 0) + // and data to send is less or equal to FIFO + // size. + // Or this is the last write and data to send + // is less or equal half FIFO size. + // In both cases disable the FIFO threshold int. + // The next int will happen after the FIFO will + // get empty. + iowrite8(0, bus->reg + NPCM_SMBTXF_CTL); + npcm_smb_clear_tx_fifo(bus); + } +} + +static void npcm_smb_read_from_fifo(struct npcm_i2c *bus, u8 bytes_in_fifo) +{ + while (bytes_in_fifo--) { + // Keep read data + u8 data = ioread8(bus->reg + NPCM_SMBSDA); + + npcm_smb_calc_PEC(bus, data); + if (bus->rd_ind < bus->rd_size) { + bus->rd_buf[bus->rd_ind++] = data; + if (bus->rd_ind == 1 && bus->read_block_use) + // First byte indicates length in block protocol + bus->rd_size = data; + } + } +} + +static void npcm_smb_master_fifo_read(struct npcm_i2c *bus) +{ + u16 rcount; + u8 fifo_bytes; + enum smb_state_ind ind = SMB_MASTER_DONE_IND; + + rcount = bus->rd_size - bus->rd_ind; + + // In order not to change the RX_TRH during transaction (we found that + // this might be problematic if it takes too much time to read the FIFO) + // we read the data in the following way. If the number of bytes to + // read == FIFO Size + C (where C < FIFO Size)then first read C bytes + // and in the next int we read rest of the data. + if (rcount < (2 * SMBUS_FIFO_SIZE) && rcount > SMBUS_FIFO_SIZE) + fifo_bytes = (u8)(rcount - SMBUS_FIFO_SIZE); + else + fifo_bytes = npcm_smb_get_fifo_fullness(bus); + + if (rcount - fifo_bytes == 0) { + // last byte is about to be read - end of transaction. + // Stop should be set before reading last byte. + npcm_smb_eob_int(bus, true); + npcm_smb_master_stop(bus); + npcm_smb_read_from_fifo(bus, fifo_bytes); + + if (npcm_smb_get_PEC(bus) != 0) + ind = SMB_MASTER_PEC_ERR_IND; + bus->state = SMB_STOP_PENDING; + bus->stop_ind = ind; + + } else { + npcm_smb_read_from_fifo(bus, fifo_bytes); + rcount = bus->rd_size - bus->rd_ind; + npcm_smb_set_fifo(bus, rcount, -1); + } +} + +static void npcm_smb_int_master_handler_write(struct npcm_i2c *bus) +{ + u16 wcount; + + NPCM_I2C_EVENT_LOG(NPCM_I2C_EVENT_WRITE); + if (bus->fifo_use) + npcm_smb_clear_tx_fifo(bus); + + // Master write operation - last byte handling + if (bus->wr_ind == bus->wr_size) { + if (bus->fifo_use && npcm_smb_get_fifo_fullness(bus) > 0) + // No more bytes to send (to add to the FIFO), however the FIFO is not + // empty yet. It is still in the middle of tx. Currently there's nothing + // to do except for waiting to the end of the tx. + // We will get an int when the FIFO will get empty. + return; + + if (bus->rd_size == 0) { + // all bytes have been written, in a pure wr operation + npcm_smb_eob_int(bus, true); + + // Issue a STOP condition on the bus + npcm_smb_master_stop(bus); + // Clear SDA Status bit (by writing dummy byte) + npcm_smb_wr_byte(bus, 0xFF); + + bus->state = SMB_STOP_PENDING; + bus->stop_ind = SMB_MASTER_DONE_IND; + } else { + // last write-byte written on previous int - need to + // restart & send slave address + if (bus->PEC_use && !bus->read_block_use && + !npcm_smb_is_quick(bus)) + // PEC is used but the protocol is not block read + // then we add extra bytes for PEC support + bus->rd_size += 1; + + if (bus->fifo_use) { + if (bus->rd_size == 1 || bus->read_block_use) { + // SMBus Block read transaction. + iowrite8(0, bus->reg + NPCM_SMBTXF_CTL); + iowrite8(1, bus->reg + NPCM_SMBRXF_CTL); + } + } + + npcm_smb_set_fifo(bus, bus->rd_size, -1); + + // Generate (Repeated) Start upon next write to SDA + npcm_smb_master_start(bus); + + if (bus->rd_size == 1) + + // Receiving one byte only - stall after successful completion of send + // address byte. If we NACK here, and slave doesn't ACK the address, we + // might unintentionally NACK the next multi-byte read + + npcm_smb_stall_after_start(bus, true); + + // send the slave address in read direction + npcm_smb_wr_byte(bus, bus->dest_addr | 0x1); + + // Next int will occur on read + bus->operation = SMB_READ_OPER; + } + } else { + if (bus->PEC_use && !npcm_smb_is_quick(bus)) + // extra bytes for PEC support + bus->wr_size += 1; + + // write next byte not last byte and not slave address + if (!bus->fifo_use || bus->wr_size == 1) { + if (bus->PEC_use && bus->rd_size == 0 && + (bus->wr_ind + 1 == bus->wr_size)) { + // Master write protocol to send PEC byte. + npcm_smb_write_PEC(bus); + bus->wr_ind++; + } else { + npcm_smb_wr_byte(bus, + bus->wr_buf[bus->wr_ind++]); + } + } else { // FIFO is used + wcount = bus->wr_size - bus->wr_ind; + npcm_smb_set_fifo(bus, -1, wcount); + npcm_smb_write_to_fifo(bus, wcount); + } + } +} + +static void npcm_smb_int_master_handler_read(struct npcm_i2c *bus) +{ + u16 block_zero_bytes; + u32 fifo_bytes; + + // Master read operation (pure read or following a write operation). + NPCM_I2C_EVENT_LOG(NPCM_I2C_EVENT_READ); + + // Initialize number of bytes to include only the first byte (presents + // a case where number of bytes to read is zero); add PEC if applicable + block_zero_bytes = 1; + if (bus->PEC_use) + block_zero_bytes++; + + fifo_bytes = FIELD_GET(NPCM_SMBRXF_CTL_RX_THR, + ioread8(bus->reg + NPCM_SMBRXF_CTL)); + + // Perform master read, distinguishing between last byte and the rest of + // the bytes. The last byte should be read when the clock is stopped + if ((bus->rd_ind < (bus->rd_size - 1)) || bus->fifo_use) { + u8 data; + + // byte to be read is not the last one + // Check if byte-before-last is about to be read + if ((bus->rd_ind == (bus->rd_size - 2)) && + !bus->fifo_use){ + // Set nack before reading byte-before-last, so that + // nack will be generated after receive of last byte + npcm_smb_nack(bus); + + if (!FIELD_GET(NPCM_SMBST_SDAST, + ioread8(bus->reg + NPCM_SMBST))) { + // No data available - reset state for new xfer + bus->state = SMB_IDLE; + + // Notify upper layer of rx completion + npcm_smb_callback(bus, SMB_NO_DATA_IND, + bus->rd_ind); + } + } else if (bus->rd_ind == 0) { //first byte handling: + // in block protocol first byte is the size + if (bus->read_block_use) { + npcm_smb_rd_byte(bus, &data); + + // First byte indicates length in block protocol + bus->rd_buf[bus->rd_ind++] = data; + bus->rd_size = data + 1; + + if (bus->PEC_use) { + bus->rd_size += 1; + data += 1; + } + + if (bus->fifo_use) { + iowrite8(NPCM_SMBFIF_CTS_RXF_TXE | + ioread8(bus->reg + + NPCM_SMBFIF_CTS), + bus->reg + NPCM_SMBFIF_CTS); + + // first byte in block protocol + // is zero -> not supported. read at + // least one byte + if (data == 0) + data = 1; + } + npcm_smb_set_fifo(bus, bus->rd_size, -1); + } else { + if (!bus->fifo_use) { + npcm_smb_rd_byte(bus, &data); + bus->rd_buf[bus->rd_ind++] = data; + } else { + npcm_smb_clear_tx_fifo(bus); + npcm_smb_master_fifo_read(bus); + } + } + + } else { + if (bus->fifo_use) { + if (bus->rd_size == block_zero_bytes && + bus->read_block_use) { + npcm_smb_eob_int(bus, true); + npcm_smb_master_stop(bus); + npcm_smb_read_from_fifo(bus, + fifo_bytes); + bus->state = SMB_STOP_PENDING; + bus->stop_ind = SMB_BLOCK_BYTES_ERR_IND; + + } else { + npcm_smb_master_fifo_read(bus); + } + } else { + npcm_smb_rd_byte(bus, &data); + bus->rd_buf[bus->rd_ind++] = data; + } + } + } else { + // last byte is about to be read - end of transaction. + // Stop should be set before reading last byte. + u8 data; + enum smb_state_ind ind = SMB_MASTER_DONE_IND; + + npcm_smb_eob_int(bus, true); + + npcm_smb_master_stop(bus); + + npcm_smb_rd_byte(bus, &data); + + if (bus->rd_size == block_zero_bytes && bus->read_block_use) { + ind = SMB_BLOCK_BYTES_ERR_IND; + } else { + bus->rd_buf[bus->rd_ind++] = data; + if (npcm_smb_get_PEC(bus) != 0) + ind = SMB_MASTER_PEC_ERR_IND; + } + + bus->state = SMB_STOP_PENDING; + bus->stop_ind = ind; + } +} + +static void npcm_smb_int_master_handler(struct npcm_i2c *bus) +{ + // A negative acknowledge has occurred + if (FIELD_GET(NPCM_SMBST_NEGACK, ioread8(bus->reg + NPCM_SMBST))) { + NPCM_I2C_EVENT_LOG(NPCM_I2C_EVENT_NACK); + if (bus->fifo_use) { + // if there are still untransmitted bytes in TX FIFO + // reduce them from wr_ind + + if (bus->operation == SMB_WRITE_OPER) + bus->wr_ind -= npcm_smb_get_fifo_fullness(bus); + // clear the FIFO + iowrite8(NPCM_SMBFIF_CTS_CLR_FIFO, + bus->reg + NPCM_SMBFIF_CTS); + } + + // In master write operation, NACK is a problem + // number of bytes sent to master less than required + npcm_smb_master_abort(bus); + bus->state = SMB_IDLE; + + // In Master mode, NEGACK should be cleared only after + // generating STOP. + // In such case, the bus is released from stall only after the + // software clears NEGACK bit. + // Then a Stop condition is sent. + iowrite8(NPCM_SMBST_NEGACK, bus->reg + NPCM_SMBST); + npcm_smb_callback(bus, SMB_NACK_IND, bus->wr_ind); + return; + } + + // Master mode: a Bus Error has been identified + if (FIELD_GET(NPCM_SMBST_BER, ioread8(bus->reg + NPCM_SMBST))) { + // Check whether bus arbitration or Start or Stop during data + // xfer bus arbitration problem should not result in recovery + if (npcm_smb_is_master(bus)) { + // Only current master is allowed to issue stop + npcm_smb_master_abort(bus); + } else { + // Bus arbitration loss + if (bus->retry_count-- > 0) { + // Perform a retry (generate a start condition) + // as soon as the SMBus is free + iowrite8(NPCM_SMBST_BER, bus->reg + NPCM_SMBST); + npcm_smb_master_start(bus); + return; + } + } + iowrite8(NPCM_SMBST_BER, bus->reg + NPCM_SMBST); + bus->state = SMB_IDLE; + npcm_smb_callback(bus, SMB_BUS_ERR_IND, + npcm_smb_get_index(bus)); + return; + } + + // A Master End of Busy (meaning Stop Condition happened) + // End of Busy int is on and End of Busy is set + if ((FIELD_GET(NPCM_SMBCTL1_EOBINTE, + ioread8(bus->reg + NPCM_SMBCTL1)) == 1) && + (FIELD_GET(NPCM_SMBCST3_EO_BUSY, + ioread8(bus->reg + NPCM_SMBCST3)))) { + NPCM_I2C_EVENT_LOG(NPCM_I2C_EVENT_EOB); + npcm_smb_eob_int(bus, false); + bus->state = SMB_IDLE; + if (npcm_smb_is_quick(bus)) + npcm_smb_callback(bus, bus->stop_ind, 0); + else + npcm_smb_callback(bus, bus->stop_ind, bus->rd_ind); + return; + } + + // Address sent and requested stall occurred (Master mode) + if (FIELD_GET(NPCM_SMBST_STASTR, ioread8(bus->reg + NPCM_SMBST))) { + // Check for Quick Command SMBus protocol + if (npcm_smb_is_quick(bus)) { + npcm_smb_eob_int(bus, true); + npcm_smb_master_stop(bus); + + // Update status + bus->state = SMB_STOP_PENDING; + bus->stop_ind = SMB_MASTER_DONE_IND; + + } else if (bus->rd_size == 1) { + // Receiving one byte only - set NACK after ensuring + // slave ACKed the address byte + npcm_smb_nack(bus); + } + + // Reset stall-after-address-byte + npcm_smb_stall_after_start(bus, false); + + // Clear stall only after setting STOP + iowrite8(NPCM_SMBST_STASTR, bus->reg + NPCM_SMBST); + + return; + } + + // SDA status is set - transmit or receive, master + if (FIELD_GET(NPCM_SMBST_SDAST, ioread8(bus->reg + NPCM_SMBST)) || + (bus->fifo_use && + (npcm_smb_tx_fifo_full(bus) || npcm_smb_rx_fifo_full(bus)))) { + // Status Bit is cleared by writing to or reading from SDA + // (depending on current direction) + switch (bus->state) { + // Handle unsuccessful bus mastership + case SMB_IDLE: + npcm_smb_master_abort(bus); + return; + + case SMB_MASTER_START: + if (npcm_smb_is_master(bus)) { + u8 addr_byte = bus->dest_addr; + + bus->crc_data = 0; + if (npcm_smb_is_quick(bus)) { + // Need to stall after successful + // completion of sending address byte + npcm_smb_stall_after_start(bus, true); + } else if (bus->wr_size == 0) { + // Set direction to Read + addr_byte |= (u8)0x1; + bus->operation = SMB_READ_OPER; + } else { + bus->operation = SMB_WRITE_OPER; + } + + // Receiving one byte only - stall after successful completion of + // sending address byte. If we NACK here, and slave doesn't ACK the + // address, we might unintentionally NACK the next multi-byte read + if (bus->wr_size == 0 && bus->rd_size == 1) + npcm_smb_stall_after_start(bus, true); + + // Write the address to the bus + bus->state = SMB_OPER_STARTED; + npcm_smb_wr_byte(bus, addr_byte); + } else { + dev_err(bus->dev, + "SDA, bus%d is not master, wr %d 0x%x...\n", + bus->num, bus->wr_size, + bus->wr_buf[0]); + } + break; + + // SDA status is set - transmit or receive: Handle master mode + case SMB_OPER_STARTED: + if (bus->operation == SMB_WRITE_OPER) + npcm_smb_int_master_handler_write(bus); + else if (bus->operation == SMB_READ_OPER) + npcm_smb_int_master_handler_read(bus); + else + pr_err("I2C%d: unknown operation\n", bus->num); + break; + default: + dev_err(bus->dev, "i2c%d master sda err on state machine\n", + bus->num); + } + } +} + +static int npcm_smb_recovery(struct i2c_adapter *_adap) +{ + u8 iter = 27; // Allow one byte to be sent by the Slave + u16 timeout; + bool done = false; + struct npcm_i2c *bus = container_of(_adap, struct npcm_i2c, adap); + + dev_info(bus->dev, "recovery bus%d\n", bus->num); + + might_sleep(); + + // Disable int + npcm_smb_int_enable(bus, false); + + // Check If the SDA line is active (low) + if (FIELD_GET(NPCM_SMBCST_TSDA, ioread8(bus->reg + NPCM_SMBCST)) == 0) { + // Repeat the following sequence until SDA is released + do { + // Issue a single SCL cycle + iowrite8(NPCM_SMBCST_TGSCL, bus->reg + NPCM_SMBCST); + timeout = ABORT_TIMEOUT; + while (timeout != 0 && + FIELD_GET(NPCM_SMBCST_TGSCL, + ioread8(bus->reg + NPCM_SMBCST) == 0)) + timeout--; + + // If SDA line is inactive (high), stop + if (FIELD_GET(NPCM_SMBCST_TSDA, + ioread8(bus->reg + NPCM_SMBCST)) == 1) + done = true; + } while ((!done) && (--iter != 0)); + + // If SDA line is released (high) + if (done) { + // Clear BB (BUS BUSY) bit + iowrite8(NPCM_SMBCST_BB, bus->reg + NPCM_SMBCST); + + // Generate a START, to synchronize Master and Slave + npcm_smb_master_start(bus); + + // Wait until START condition is sent, or timeout + timeout = ABORT_TIMEOUT; + while (timeout != 0 && !npcm_smb_is_master(bus)) + timeout--; + + // If START condition was sent + if (timeout > 0) { + // Send an address byte + npcm_smb_wr_byte(bus, bus->dest_addr); + + // Generate a STOP condition + npcm_smb_master_stop(bus); + } + return 0; + } + } + + // check if success: + if (npcm_smb_get_SCL(_adap) == 1 && npcm_smb_get_SDA(_adap) == 1) + goto npcm_smb_recovery_done; + + // hold clock low for 35ms: 25 and some spair: + npcm_smb_set_SCL(_adap, 0); + usleep_range(35000, 40000); + npcm_smb_set_SCL(_adap, 1); + usleep_range(1000, 2000); + + // check if success: + if (npcm_smb_get_SCL(_adap) == 1 && npcm_smb_get_SDA(_adap) == 1) + goto npcm_smb_recovery_done; + + return 0; + +npcm_smb_recovery_done: + + npcm_smb_int_enable(bus, true); + return -(ENOTRECOVERABLE); +} + +static bool npcm_smb_init_clk(struct npcm_i2c *bus, enum smb_mode mode, + u32 bus_freq) +{ + u32 k1 = 0; + u32 k2 = 0; + u8 dbnct = 0; + u32 sclfrq = 0; + u8 hldt = 7; + bool fast_mode = false; + u32 src_clk_freq; // in KHz + + src_clk_freq = bus->apb_clk / 1000; + + if (bus_freq <= SMBUS_FREQ_100KHZ) { + sclfrq = src_clk_freq / (bus_freq * 4); + + if (sclfrq < SCLFRQ_MIN || sclfrq > SCLFRQ_MAX) + return false; + + if (src_clk_freq >= 40000) + hldt = 17; + else if (src_clk_freq >= 12500) + hldt = 15; + else + hldt = 7; + } + + else if (bus_freq == SMBUS_FREQ_400KHZ) { + sclfrq = 0; + fast_mode = true; + + if ((mode == SMB_MASTER && src_clk_freq < 7500) || + (mode == SMB_SLAVE && src_clk_freq < 10000)) + // 400KHZ cannot be supported for master core clock < 7.5 MHZ + // or slave core clock < 10 MHZ + return false; + + // Master or Slave with frequency > 25 MHZ + if (mode == SMB_MASTER || src_clk_freq > 25000) { + hldt = (u8)__KERNEL_DIV_ROUND_UP(src_clk_freq * 300, + 1000000) + 7; + if (mode == SMB_MASTER) { + k1 = __KERNEL_DIV_ROUND_UP(src_clk_freq * 1600, + 1000000); + k2 = __KERNEL_DIV_ROUND_UP(src_clk_freq * 900, + 1000000); + k1 = round_up(k1, 2); + k2 = round_up(k2 + 1, 2); + if (k1 < SCLFRQ_MIN || k1 > SCLFRQ_MAX || + k2 < SCLFRQ_MIN || k2 > SCLFRQ_MAX) + return false; + } + } else { // Slave with frequency 10-25 MHZ + hldt = 7; + dbnct = 2; + } + } + + else if (bus_freq == SMBUS_FREQ_1MHZ) { + sclfrq = 0; + fast_mode = true; + + if ((mode == SMB_MASTER && src_clk_freq < 15000) || + (mode == SMB_SLAVE && src_clk_freq < 24000)) + // 1MHZ cannot be supported for master core clock < 15 MHZ + // or slave core clock < 24 MHZ + return false; + + if (mode == SMB_MASTER) { + k1 = round_up((__KERNEL_DIV_ROUND_UP(src_clk_freq * 620, + 1000000)), 2); + k2 = round_up((__KERNEL_DIV_ROUND_UP(src_clk_freq * 380, + 1000000) + 1), 2); + if (k1 < SCLFRQ_MIN || k1 > SCLFRQ_MAX || + k2 < SCLFRQ_MIN || k2 > SCLFRQ_MAX) { + return false; + } + } + + // Master or Slave with frequency > 40 MHZ + if (mode == SMB_MASTER || src_clk_freq > 40000) { + // Set HLDT: + // SDA hold time: (HLDT-7) * T(CLK) >= 120 + // HLDT = 120/T(CLK) + 7 = 120 * FREQ(CLK) + 7 + hldt = (u8)__KERNEL_DIV_ROUND_UP(src_clk_freq * 120, + 1000000) + 7; + + // Slave with frequency 24-40 MHZ + } else { + hldt = 7; + dbnct = 2; + } + } + + // Frequency larger than 1 MHZ + else + return false; + + // After clock parameters calculation update the reg + iowrite8((ioread8(bus->reg + NPCM_SMBCTL2) + & ~SMBCTL2_SCLFRQ6_0) | FIELD_PREP(SMBCTL2_SCLFRQ6_0, + sclfrq & 0x7F), bus->reg + NPCM_SMBCTL2); + + iowrite8((ioread8(bus->reg + NPCM_SMBCTL3) & ~SMBCTL3_SCLFRQ8_7) | + FIELD_PREP(SMBCTL3_SCLFRQ8_7, (sclfrq >> 7) & 0x3), + bus->reg + NPCM_SMBCTL3); + + iowrite8((ioread8(bus->reg + NPCM_SMBCTL3) & ~SMBCTL3_400K_MODE) | + FIELD_PREP(SMBCTL3_400K_MODE, fast_mode), + bus->reg + NPCM_SMBCTL3); + + // Select Bank 0 to access NPCM_SMBCTL4/NPCM_SMBCTL5 + npcm_smb_select_bank(bus, SMB_BANK_0); + + if (bus_freq >= SMBUS_FREQ_400KHZ) { + // k1 and k2 are relevant for master mode only + if (mode == SMB_MASTER) { + // Set SCL Low/High Time: + // k1 = 2 * SCLLT7-0 -> Low Time = k1 / 2 + // k2 = 2 * SCLLT7-0 -> High Time = k2 / 2 + iowrite8((u8)k1 / 2, bus->reg + NPCM_SMBSCLLT); + iowrite8((u8)k2 / 2, bus->reg + NPCM_SMBSCLHT); + } else { // DBNCT is relevant for slave mode only + iowrite8((ioread8(bus->reg + NPCM_SMBCTL5) & + ~SMBCTL5_DBNCT) | + FIELD_PREP(SMBCTL5_DBNCT, dbnct), + bus->reg + NPCM_SMBCTL5); + } + } + + iowrite8((ioread8(bus->reg + NPCM_SMBCTL4) & ~SMBCTL4_HLDT) + | FIELD_PREP(SMBCTL4_HLDT, hldt), bus->reg + NPCM_SMBCTL4); + + // Return to Bank 1, and stay there by default: + npcm_smb_select_bank(bus, SMB_BANK_1); + + dev_dbg(bus->dev, "k1 = %d k2 = %d dbnct = %d sclfrq = %d hldt = %d src_clk_freq %d fast_mode %d\n", + k1, k2, dbnct, sclfrq, hldt, src_clk_freq, fast_mode); + + return true; +} + +static bool npcm_smb_init_module(struct npcm_i2c *bus, enum smb_mode mode, + u32 bus_freq) +{ + // Check whether module already enabled or frequency is out of bounds + if ((bus->state != SMB_DISABLE && bus->state != SMB_IDLE) || + bus_freq < SMBUS_FREQ_MIN || bus_freq > SMBUS_FREQ_MAX) + return false; + // Configure FIFO disabled mode so slave will not use fifo + // (maste will set it on if supported) + bus->threshold_fifo = SMBUS_FIFO_SIZE; + iowrite8(ioread8(bus->reg + NPCM_SMBFIF_CTL) & ~NPCM_SMBFIF_CTL_FIFO_EN, + bus->reg + NPCM_SMBFIF_CTL); + + bus->fifo_use = false; + + // Configure SMB module clock frequency + if (!npcm_smb_init_clk(bus, mode, bus_freq)) { + pr_err("npcm_smb_init_clk failed\n"); + return false; + } + npcm_smb_disable(bus); + + // Enable module (before configuring CTL1) + npcm_smb_enable(bus); + bus->state = SMB_IDLE; + + // Enable SMB int and New Address Match int source + iowrite8((ioread8(bus->reg + NPCM_SMBCTL1) | NPCM_SMBCTL1_NMINTE) & + ~NPCM_SMBCTL1_RWS_FIELDS, + bus->reg + NPCM_SMBCTL1); + + npcm_smb_int_enable(bus, true); + return true; +} + +static int __npcm_i2c_init(struct npcm_i2c *bus, struct platform_device *pdev) +{ + u32 clk_freq; + int ret; + + // Initialize the internal data structures + bus->state = SMB_DISABLE; + bus->master_or_slave = SMB_SLAVE; + + ret = of_property_read_u32(pdev->dev.of_node, + "bus-frequency", &clk_freq); + if (ret < 0) { + dev_err(&pdev->dev, + "Could not read bus-frequency property\n"); + clk_freq = 100000; + } + ret = npcm_smb_init_module(bus, SMB_MASTER, clk_freq / 1000); + if (!ret) { + dev_err(&pdev->dev, + "npcm_smb_init_module() failed\n"); + return -1; + } + + crc8_populate_lsb(npcm7xx_crc8, 0x07); + crc8_populate_msb(npcm7xx_crc8, 0x07); + return 0; +} + +static irqreturn_t npcm_i2c_bus_irq(int irq, void *dev_id) +{ + struct npcm_i2c *bus = dev_id; + + bus->int_cnt++; + _npcm7xx_get_time_stamp(&bus->int_time_stamp[0], + &bus->int_time_stamp[1]); + if (bus->master_or_slave == SMB_MASTER) { + npcm_smb_int_master_handler(bus); + return IRQ_HANDLED; + } + + dev_err(bus->dev, "int unknown on bus%d\n", bus->num); + return IRQ_NONE; +} + +static bool npcm_smb_master_start_xmit(struct npcm_i2c *bus, + u8 slave_addr, u16 nwrite, u16 nread, + u8 *write_data, u8 *read_data, + bool use_PEC) +{ + // + // Allow only if bus is not busy + // + if (bus->state != SMB_IDLE) { + dev_info(bus->dev, "\tbus%d->state != SMB_IDLE\n", bus->num); + return false; + } + + // Configure FIFO mode : + if (FIELD_GET(SMB_VER_FIFO_EN, ioread8(bus->reg + SMB_VER))) { + bus->fifo_use = true; + iowrite8(ioread8(bus->reg + NPCM_SMBFIF_CTL) | + NPCM_SMBFIF_CTL_FIFO_EN, bus->reg + NPCM_SMBFIF_CTL); + } else { + bus->fifo_use = false; + } + + // Update driver state + bus->master_or_slave = SMB_MASTER; + bus->state = SMB_MASTER_START; + if (nwrite > 0) + bus->operation = SMB_WRITE_OPER; + else + bus->operation = SMB_READ_OPER; + + if (npcm_smb_is_quick(bus)) + bus->operation = SMB_WRITE_OPER; // send the address with W bit. + + bus->dest_addr = (u8)(slave_addr << 1);// Translate 7bit to 8bit format + bus->wr_buf = write_data; + bus->wr_size = nwrite; + bus->wr_ind = 0; + bus->rd_buf = read_data; + bus->rd_size = nread; + bus->rd_ind = 0; + bus->PEC_use = use_PEC; + bus->retry_count = SMB_RETRY_MAX_COUNT; + + // clear BER just in case it is set due to a previous transaction + iowrite8(NPCM_SMBST_BER, bus->reg + NPCM_SMBST); + + // Initiate SMBus master transaction + // Generate a Start condition on the SMBus + if (bus->fifo_use) { + // select bank 1 for FIFO regs + npcm_smb_select_bank(bus, SMB_BANK_1); + + // clear FIFO and relevant status bits. + iowrite8(ioread8(bus->reg + NPCM_SMBFIF_CTS) | + NPCM_SMBFIF_CTS_SLVRSTR | + NPCM_SMBFIF_CTS_CLR_FIFO | + NPCM_SMBFIF_CTS_RXF_TXE, bus->reg + NPCM_SMBFIF_CTS); + + if (bus->operation == SMB_READ_OPER) { + //This is a read only operation. Configure the FIFO + //threshold according to the needed # of bytes to read. + npcm_smb_set_fifo(bus, nread, -1); + } else if (bus->operation == SMB_WRITE_OPER) { + npcm_smb_set_fifo(bus, -1, nwrite); + } + } + + bus->int_cnt = 0; + bus->event_log = 0; + npcm_smb_master_start(bus); + + return true; +} + +static int npcm_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, + int num) +{ + struct npcm_i2c *bus = adap->algo_data; + struct i2c_msg *msg0, *msg1; + unsigned long time_left, flags; + u16 nwrite, nread; + u8 *write_data, *read_data; + u8 slave_addr; + int ret = 0; + + spin_lock_irqsave(&bus->lock, flags); + bus->cmd_err = -EPERM; + bus->int_cnt = 0; + bus->stop_ind = SMB_NO_STATUS_IND; + bus->read_block_use = false; + + iowrite8(0xFF, bus->reg + NPCM_SMBST); + + if (num > 2 || num < 1) { + pr_err("I2C command not supported, num of msgs = %d\n", num); + spin_unlock_irqrestore(&bus->lock, flags); + return -EINVAL; + } + + msg0 = &msgs[0]; + slave_addr = msg0->addr; + if (msg0->flags & I2C_M_RD) { // read + if (num == 2) { + pr_err(" num = 2 but first msg is rd instead of wr\n"); + spin_unlock_irqrestore(&bus->lock, flags); + return -EINVAL; + } + nwrite = 0; + write_data = NULL; + if (msg0->flags & I2C_M_RECV_LEN) { + nread = 1; + bus->read_block_use = true; + + } else { + nread = msg0->len; + } + read_data = msg0->buf; + + } else { // write + nwrite = msg0->len; + write_data = msg0->buf; + nread = 0; + read_data = NULL; + if (num == 2) { + msg1 = &msgs[1]; + if (slave_addr != msg1->addr) { + pr_err("SA==%02x but msg1->addr == %02x\n", + slave_addr, msg1->addr); + spin_unlock_irqrestore(&bus->lock, flags); + return -EINVAL; + } + if ((msg1->flags & I2C_M_RD) == 0) { + pr_err("num = 2 but both msg are write.\n"); + spin_unlock_irqrestore(&bus->lock, flags); + return -EINVAL; + } + if (msg1->flags & I2C_M_RECV_LEN) { + nread = 1; + bus->read_block_use = true; + } else { + nread = msg1->len; + bus->read_block_use = false; + } + + read_data = msg1->buf; + } + } + + bus->msgs = msgs; + bus->msgs_num = num; + + if (nwrite >= 32 * 1024 || nread >= 32 * 1024) { + pr_err("i2c%d buffer too big\n", bus->num); + return -EINVAL; + } + + reinit_completion(&bus->cmd_complete); + + if (npcm_smb_master_start_xmit(bus, slave_addr, nwrite, nread, + write_data, read_data, 0) == false) + ret = -(EBUSY); + + if (ret != -(EBUSY)) { + time_left = wait_for_completion_timeout(&bus->cmd_complete, + bus->adap.timeout); + + if (time_left == 0 && bus->cmd_err == -EPERM) { + npcm_smb_master_abort(bus); + ret = -ETIMEDOUT; + } else { + ret = bus->cmd_err; + } + } + + bus->msgs = NULL; + bus->msgs_num = 0; + spin_unlock_irqrestore(&bus->lock, flags); + + // If nothing went wrong, return number of messages xferred. + if (ret >= 0) + return num; + else + return ret; +} + +static u32 npcm_i2c_functionality(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_SMBUS_BLOCK_DATA; +} + +static const struct i2c_algorithm npcm_i2c_algo = { + .master_xfer = npcm_i2c_master_xfer, + .functionality = npcm_i2c_functionality, +}; + +static struct i2c_bus_recovery_info npcm_i2c_recovery = { + .recover_bus = npcm_smb_recovery, + .get_scl = npcm_smb_get_SCL, + .set_scl = npcm_smb_set_SCL, + .get_sda = npcm_smb_get_SDA, +}; + +static int npcm_i2c_probe_bus(struct platform_device *pdev) +{ + struct npcm_i2c *bus; + struct resource *res; + struct clk *i2c_clk; + int ret; + int num; + + bus = devm_kzalloc(&pdev->dev, sizeof(*bus), GFP_KERNEL); + if (!bus) + return -ENOMEM; + +#ifdef CONFIG_OF + num = of_alias_get_id(pdev->dev.of_node, "i2c"); + bus->num = num; + i2c_clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(i2c_clk)) { + pr_err(" I2C probe failed: can't read clk.\n"); + return -EPROBE_DEFER; + } + bus->apb_clk = clk_get_rate(i2c_clk); + dev_dbg(bus->dev, "I2C APB clock is %d\n", bus->apb_clk); +#endif // CONFIG_OF + + gcr_regmap = syscon_regmap_lookup_by_compatible("nuvoton,npcm750-gcr"); + if (IS_ERR(gcr_regmap)) { + pr_err("%s: failed to find nuvoton,npcm750-gcr\n", __func__); + return IS_ERR(gcr_regmap); + } + regmap_write(gcr_regmap, NPCM_I2CSEGCTL, I2CSEGCTL_VAL); + dev_dbg(bus->dev, "I2C%d: gcr mapped\n", bus->num); + + clk_regmap = syscon_regmap_lookup_by_compatible("nuvoton,npcm750-clk"); + if (IS_ERR(clk_regmap)) { + pr_err("%s: failed to find nuvoton,npcm750-clk\n", __func__); + return IS_ERR(clk_regmap); + } + dev_dbg(bus->dev, "I2C%d: clk mapped\n", bus->num); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + dev_dbg(bus->dev, "resource: %pR\n", res); + bus->reg = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR((bus)->reg)) + return PTR_ERR((bus)->reg); + dev_dbg(bus->dev, "base = %p\n", bus->reg); + + // Initialize the I2C adapter + spin_lock_init(&bus->lock); + init_completion(&bus->cmd_complete); + bus->adap.owner = THIS_MODULE; + bus->adap.class = I2C_CLASS_HWMON | I2C_CLASS_SPD; + bus->adap.retries = 0; + bus->adap.timeout = 500 * HZ / 1000; + bus->adap.algo = &npcm_i2c_algo; + bus->adap.algo_data = bus; + bus->adap.dev.parent = &pdev->dev; + bus->adap.dev.of_node = pdev->dev.of_node; + bus->adap.bus_recovery_info = &npcm_i2c_recovery; + + snprintf(bus->adap.name, sizeof(bus->adap.name), "Nuvoton i2c"); + + bus->dev = &pdev->dev; + + ret = __npcm_i2c_init(bus, pdev); + if (ret < 0) + return ret; + + bus->irq = platform_get_irq(pdev, 0); + if (bus->irq < 0) { + pr_err("I2C platform_get_irq error."); + return -ENODEV; + } + dev_dbg(bus->dev, "irq = %d\n", bus->irq); + + ret = request_irq(bus->irq, npcm_i2c_bus_irq, 0, + dev_name(&pdev->dev), (void *)bus); + if (ret) { + dev_err(&pdev->dev, "I2C%d: request_irq fail\n", bus->num); + return ret; + } + + ret = i2c_add_adapter(&bus->adap); + if (ret < 0) { + dev_err(&pdev->dev, "I2C%d: i2c_add_adapter fail\n", bus->num); + return ret; + } + + platform_set_drvdata(pdev, bus); + pr_info("i2c bus %d registered\n", bus->adap.nr); + + return 0; +} + +static int npcm_i2c_remove_bus(struct platform_device *pdev) +{ + unsigned long lock_flags; + struct npcm_i2c *bus = platform_get_drvdata(pdev); + + spin_lock_irqsave(&bus->lock, lock_flags); + npcm_smb_disable(bus); + spin_unlock_irqrestore(&bus->lock, lock_flags); + i2c_del_adapter(&bus->adap); + + return 0; +} + +static const struct of_device_id npcm_i2c_bus_of_table[] = { + { .compatible = "nuvoton,npcm750-i2c-bus", }, + {}, +}; +MODULE_DEVICE_TABLE(of, npcm_i2c_bus_of_table); + +static struct platform_driver npcm_i2c_bus_driver = { + .probe = npcm_i2c_probe_bus, + .remove = npcm_i2c_remove_bus, + .driver = { + .name = "nuvoton-i2c-bus", + .of_match_table = npcm_i2c_bus_of_table, + } +}; +module_platform_driver(npcm_i2c_bus_driver); + +MODULE_AUTHOR("Avi Fishman "); +MODULE_AUTHOR("Tali Perry "); +MODULE_DESCRIPTION("Nuvoton I2C Bus Driver"); +MODULE_LICENSE("GPL v2"); +MODULE_VERSION(I2C_VERSION);