[v2,2/3] pinctrl: msm: Mux out gpio function with gpio_request()
diff mbox series

Message ID 20180725222900.33231-3-swboyd@chromium.org
State New
Headers show
Series
  • pinctrl: msm interrupt and muxing fixes
Related show

Commit Message

Stephen Boyd July 25, 2018, 10:28 p.m. UTC
We rely on devices to use pinmuxing configurations in DT to select the
GPIO function (function 0) if they're going to use the gpio in GPIO
mode. Let's simplify things for driver authors by implementing
gpio_request_enable() for this pinctrl driver to mux out the GPIO
function when the gpio is use from gpiolib.

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Doug Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
---

Changes from v1:
 * None

 drivers/pinctrl/qcom/pinctrl-msm.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

Patch
diff mbox series

diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c
index 3970dc599092..1d7367149268 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
@@ -176,11 +176,27 @@  static int msm_pinmux_set_mux(struct pinctrl_dev *pctldev,
 	return 0;
 }
 
+static int msm_pinmux_request_gpio(struct pinctrl_dev *pctldev,
+				   struct pinctrl_gpio_range *range,
+				   unsigned offset)
+{
+	struct msm_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
+	const struct msm_pingroup *g = &pctrl->soc->groups[offset];
+
+	/* No funcs? Probably ACPI so can't do anything here */
+	if (!g->nfuncs)
+		return 0;
+
+	/* For now assume function 0 is GPIO because it always is */
+	return msm_pinmux_set_mux(pctldev, 0, offset);
+}
+
 static const struct pinmux_ops msm_pinmux_ops = {
 	.request		= msm_pinmux_request,
 	.get_functions_count	= msm_get_functions_count,
 	.get_function_name	= msm_get_function_name,
 	.get_function_groups	= msm_get_function_groups,
+	.gpio_request_enable	= msm_pinmux_request_gpio,
 	.set_mux		= msm_pinmux_set_mux,
 };