Patchwork [V7] bcma: add Broadcom specific AMBA bus driver

login
register
mail settings
Submitter Rafał Miłecki
Date May 9, 2011, 4:56 p.m.
Message ID <1304960206-8832-1-git-send-email-zajec5@gmail.com>
Download mbox | patch
Permalink /patch/94790/
State Not Applicable
Headers show

Comments

Rafał Miłecki - May 9, 2011, 4:56 p.m.
Broadcom has released cards based on a new AMBA-based bus type. From a
programming point of view, this new bus type differs from AMBA and does
not use AMBA common registers. It also differs enough from SSB. We
decided that a new bus driver is needed to keep the code clean.

In its current form, the driver detects devices present on the bus and
registers them in the system. It allows registering BCMA drivers for
specified bus devices and provides them basic operations. The bus driver
itself includes two important bus managing drivers: ChipCommon core
driver and PCI(c) core driver. They are early used to allow correct
initialization.

Currently code is limited to supporting buses on PCI(e) devices, however
the driver is designed to be used also on other hosts. The host
abstraction layer is implemented and already used for PCI(e).

Support for PCI(e) hosts is working and seems to be stable (access to
80211 core was tested successfully on a few devices). We can still
optimize it by using some fixed windows, but this can be done later
without affecting any external code. Windows are just ranges in MMIO
used for accessing cores on the bus.

Cc: Greg KH <greg@kroah.com>
Cc: Michael Büsch <mb@bu3sch.de>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: George Kashperko <george@znau.edu.ua>
Cc: Arend van Spriel <arend@broadcom.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Andy Botting <andy@andybotting.com>
Cc: linuxdriverproject <devel@linuxdriverproject.org>
Cc: linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
---
V2: Rename to axi
    Use DEFINE_PCI_DEVICE_TABLE in bridge
    Make use of pr_fmt and pr_*
    Store core class
    Rename bridge to not b43 specific
    Replace magic 0x1000 with BCMAI_CORE_SIZE
    Remove some old "ssb" names and defines
    Move BCMAI_ADDR_BASE def
    Add drvdata field
V3: Fix reloading (kfree issue)
    Add 14e4:0x4331
    Fix non-initialized struct issue
    Drop useless inline functions wrappers for pci core drv
    Proper pr_* usage
V3.1: Include forgotten changes (pr_* and include related)
    Explain why we dare to implement empty release function
V4: Add ABI documentation
    Move struct device to wrapper and alloc it dynamically
    checkpatch.pl pointed fixes
V5: Rename to bcma, AXI was really bad name
    Use EXPORT_SYMBOL_GPL
    Set pci driver fields in one place
    Drop unlikely
    Use BCMA_CORE_SIZE for calc in awrite32
    Add README
    Fix compilation (delay.h)
V6: Replace AXI in Documentation
    Fill MAINTAINERS
    Names only for Broadcom
    Update TODO and README
    Use errno
V7: Describe driver in commit message
    Use linked list for devices
---
 Documentation/ABI/testing/sysfs-bus-bcma    |   31 +++
 MAINTAINERS                                 |    7 +
 drivers/Kconfig                             |    2 +
 drivers/Makefile                            |    1 +
 drivers/bcma/Kconfig                        |   33 +++
 drivers/bcma/Makefile                       |    7 +
 drivers/bcma/README                         |   19 ++
 drivers/bcma/TODO                           |    3 +
 drivers/bcma/bcma_private.h                 |   28 ++
 drivers/bcma/core.c                         |   51 ++++
 drivers/bcma/driver_chipcommon.c            |   87 +++++++
 drivers/bcma/driver_chipcommon_pmu.c        |  134 ++++++++++
 drivers/bcma/driver_pci.c                   |  163 ++++++++++++
 drivers/bcma/host_pci.c                     |  196 +++++++++++++++
 drivers/bcma/main.c                         |  247 ++++++++++++++++++
 drivers/bcma/scan.c                         |  360 +++++++++++++++++++++++++++
 drivers/bcma/scan.h                         |   56 ++++
 include/linux/bcma/bcma.h                   |  224 +++++++++++++++++
 include/linux/bcma/bcma_driver_chipcommon.h |  297 ++++++++++++++++++++++
 include/linux/bcma/bcma_driver_pci.h        |   89 +++++++
 include/linux/bcma/bcma_regs.h              |   34 +++
 include/linux/mod_devicetable.h             |   17 ++
 scripts/mod/file2alias.c                    |   22 ++
 23 files changed, 2108 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/ABI/testing/sysfs-bus-bcma
 create mode 100644 drivers/bcma/Kconfig
 create mode 100644 drivers/bcma/Makefile
 create mode 100644 drivers/bcma/README
 create mode 100644 drivers/bcma/TODO
 create mode 100644 drivers/bcma/bcma_private.h
 create mode 100644 drivers/bcma/core.c
 create mode 100644 drivers/bcma/driver_chipcommon.c
 create mode 100644 drivers/bcma/driver_chipcommon_pmu.c
 create mode 100644 drivers/bcma/driver_pci.c
 create mode 100644 drivers/bcma/host_pci.c
 create mode 100644 drivers/bcma/main.c
 create mode 100644 drivers/bcma/scan.c
 create mode 100644 drivers/bcma/scan.h
 create mode 100644 include/linux/bcma/bcma.h
 create mode 100644 include/linux/bcma/bcma_driver_chipcommon.h
 create mode 100644 include/linux/bcma/bcma_driver_pci.h
 create mode 100644 include/linux/bcma/bcma_regs.h
Arend van Spriel - May 17, 2011, 5:33 p.m.
On 05/09/2011 06:56 PM, Rafał Miłecki wrote:
> Broadcom has released cards based on a new AMBA-based bus type. From a
> programming point of view, this new bus type differs from AMBA and does
> not use AMBA common registers. It also differs enough from SSB. We
> decided that a new bus driver is needed to keep the code clean.
>
> In its current form, the driver detects devices present on the bus and
> registers them in the system. It allows registering BCMA drivers for
> specified bus devices and provides them basic operations. The bus driver
> itself includes two important bus managing drivers: ChipCommon core
> driver and PCI(c) core driver. They are early used to allow correct
> initialization.
>
> Currently code is limited to supporting buses on PCI(e) devices, however
> the driver is designed to be used also on other hosts. The host
> abstraction layer is implemented and already used for PCI(e).
>
> Support for PCI(e) hosts is working and seems to be stable (access to
> 80211 core was tested successfully on a few devices). We can still
> optimize it by using some fixed windows, but this can be done later
> without affecting any external code. Windows are just ranges in MMIO
> used for accessing cores on the bus.
Hi Rafał,

Just some minor feedback on coding style. I wanted to make a change in 
host_pci.c to avoid changing the PCI BAR window and noticed following:
1. indentation is all spaces.
2. initial indent is 7 spaces, and subsequent indents are 8 spaces.
3. pointer assignment: ptr =&var;
4. output parameter: foo(bar,&yabar);

I am not sure whether checkpatch.pl triggers on any of these, but can we 
fix at least items 1) and 2).

Gr. AvS
Rafał Miłecki - May 17, 2011, 5:48 p.m.
2011/5/17 Arend van Spriel <arend@broadcom.com>:
> On 05/09/2011 06:56 PM, Rafał Miłecki wrote:
>>
>> Broadcom has released cards based on a new AMBA-based bus type. From a
>> programming point of view, this new bus type differs from AMBA and does
>> not use AMBA common registers. It also differs enough from SSB. We
>> decided that a new bus driver is needed to keep the code clean.
>>
>> In its current form, the driver detects devices present on the bus and
>> registers them in the system. It allows registering BCMA drivers for
>> specified bus devices and provides them basic operations. The bus driver
>> itself includes two important bus managing drivers: ChipCommon core
>> driver and PCI(c) core driver. They are early used to allow correct
>> initialization.
>>
>> Currently code is limited to supporting buses on PCI(e) devices, however
>> the driver is designed to be used also on other hosts. The host
>> abstraction layer is implemented and already used for PCI(e).
>>
>> Support for PCI(e) hosts is working and seems to be stable (access to
>> 80211 core was tested successfully on a few devices). We can still
>> optimize it by using some fixed windows, but this can be done later
>> without affecting any external code. Windows are just ranges in MMIO
>> used for accessing cores on the bus.
>
> Hi Rafał,
>
> Just some minor feedback on coding style. I wanted to make a change in
> host_pci.c to avoid changing the PCI BAR window and noticed following:

Sorry?


> 1. indentation is all spaces.

You can find spaces only for aligning text in newline after breaking
more-than-80-chars lines.


> 2. initial indent is 7 spaces, and subsequent indents are 8 spaces.

$ grep "        " ./*c | wc -l
0


> 3. pointer assignment: ptr =&var;

$ grep "=&" ./*c | wc -l
0


> 4. output parameter: foo(bar,&yabar);

$ grep ",&" ./*c | wc -l
0

Patch

diff --git a/Documentation/ABI/testing/sysfs-bus-bcma b/Documentation/ABI/testing/sysfs-bus-bcma
new file mode 100644
index 0000000..06b62ba
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-bcma
@@ -0,0 +1,31 @@ 
+What:		/sys/bus/bcma/devices/.../manuf
+Date:		May 2011
+KernelVersion:	2.6.40
+Contact:	Rafał Miłecki <zajec5@gmail.com>
+Description:
+		Each BCMA core has it's manufacturer id. See
+		include/linux/bcma/bcma.h for possible values.
+
+What:		/sys/bus/bcma/devices/.../id
+Date:		May 2011
+KernelVersion:	2.6.40
+Contact:	Rafał Miłecki <zajec5@gmail.com>
+Description:
+		There are a few types of BCMA cores, they can be identified by
+		id field.
+
+What:		/sys/bus/bcma/devices/.../rev
+Date:		May 2011
+KernelVersion:	2.6.40
+Contact:	Rafał Miłecki <zajec5@gmail.com>
+Description:
+		BCMA cores of the same type can still slightly differ depending
+		on their revision. Use it for detailed programming.
+
+What:		/sys/bus/bcma/devices/.../class
+Date:		May 2011
+KernelVersion:	2.6.40
+Contact:	Rafał Miłecki <zajec5@gmail.com>
+Description:
+		Each BCMA core is identified by few fields, including class it
+		belongs to. See include/linux/bcma/bcma.h for possible values.
diff --git a/MAINTAINERS b/MAINTAINERS
index f7cb5a7..f1e235a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5816,6 +5816,13 @@  S:	Maintained
 F:	drivers/ssb/
 F:	include/linux/ssb/
 
+BROADCOM SPECIFIC AMBA DRIVER (BCMA)
+M:	Rafał Miłecki <zajec5@gmail.com>
+L:	linux-wireless@vger.kernel.org
+S:	Maintained
+F:	drivers/bcma/
+F:	include/linux/bcma/
+
 SONY VAIO CONTROL DEVICE DRIVER
 M:	Mattia Dongili <malattia@linux.it>
 L:	platform-driver-x86@vger.kernel.org
diff --git a/drivers/Kconfig b/drivers/Kconfig
index 177c7d1..aca7067 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -68,6 +68,8 @@  source "drivers/watchdog/Kconfig"
 
 source "drivers/ssb/Kconfig"
 
+source "drivers/bcma/Kconfig"
+
 source "drivers/mfd/Kconfig"
 
 source "drivers/regulator/Kconfig"
diff --git a/drivers/Makefile b/drivers/Makefile
index 3f135b6..a29527f 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -110,6 +110,7 @@  obj-$(CONFIG_HID)		+= hid/
 obj-$(CONFIG_PPC_PS3)		+= ps3/
 obj-$(CONFIG_OF)		+= of/
 obj-$(CONFIG_SSB)		+= ssb/
+obj-$(CONFIG_BCMA)		+= bcma/
 obj-$(CONFIG_VHOST_NET)		+= vhost/
 obj-$(CONFIG_VLYNQ)		+= vlynq/
 obj-$(CONFIG_STAGING)		+= staging/
diff --git a/drivers/bcma/Kconfig b/drivers/bcma/Kconfig
new file mode 100644
index 0000000..353781b
--- /dev/null
+++ b/drivers/bcma/Kconfig
@@ -0,0 +1,33 @@ 
+config BCMA_POSSIBLE
+	bool
+	depends on HAS_IOMEM && HAS_DMA
+	default y
+
+menu "Broadcom specific AMBA"
+	depends on BCMA_POSSIBLE
+
+config BCMA
+	tristate "BCMA support"
+	depends on BCMA_POSSIBLE
+	help
+	  Bus driver for Broadcom specific Advanced Microcontroller Bus
+	  Architecture.
+
+config BCMA_HOST_PCI_POSSIBLE
+	bool
+	depends on BCMA && PCI = y
+	default y
+
+config BCMA_HOST_PCI
+	bool "Support for BCMA on PCI-host bus"
+	depends on BCMA_HOST_PCI_POSSIBLE
+
+config BCMA_DEBUG
+	bool "BCMA debugging"
+	depends on BCMA
+	help
+	  This turns on additional debugging messages.
+
+	  If unsure, say N
+
+endmenu
diff --git a/drivers/bcma/Makefile b/drivers/bcma/Makefile
new file mode 100644
index 0000000..0d56245
--- /dev/null
+++ b/drivers/bcma/Makefile
@@ -0,0 +1,7 @@ 
+bcma-y					+= main.o scan.o core.o
+bcma-y					+= driver_chipcommon.o driver_chipcommon_pmu.o
+bcma-y					+= driver_pci.o
+bcma-$(CONFIG_BCMA_HOST_PCI)		+= host_pci.o
+obj-$(CONFIG_BCMA)			+= bcma.o
+
+ccflags-$(CONFIG_BCMA_DEBUG)		:= -DDEBUG
diff --git a/drivers/bcma/README b/drivers/bcma/README
new file mode 100644
index 0000000..f7e7ce4
--- /dev/null
+++ b/drivers/bcma/README
@@ -0,0 +1,19 @@ 
+Broadcom introduced new bus as replacement for older SSB. It is based on AMBA,
+however from programming point of view there is nothing AMBA specific we use.
+
+Standard AMBA drivers are platform specific, have hardcoded addresses and use
+AMBA standard fields like CID and PID.
+
+In case of Broadcom's cards every device consists of:
+1) Broadcom specific AMBA device. It is put on AMBA bus, but can not be treated
+   as standard AMBA device. Reading it's CID or PID can cause machine lockup.
+2) AMBA standard devices called ports or wrappers. They have CIDs (AMBA_CID)
+   and PIDs (0x103BB369), but we do not use that info for anything. One of that
+   devices is used for managing Broadcom specific core.
+
+Addresses of AMBA devices are not hardcoded in driver and have to be read from
+EPROM.
+
+In this situation we decided to introduce separated bus. It can contain up to
+16 devices identified by Broadcom specific fields: manufacturer, id, revision
+and class.
diff --git a/drivers/bcma/TODO b/drivers/bcma/TODO
new file mode 100644
index 0000000..da7aa99
--- /dev/null
+++ b/drivers/bcma/TODO
@@ -0,0 +1,3 @@ 
+- Interrupts
+- Defines for PCI core driver
+- Create kernel Documentation (use info from README)
diff --git a/drivers/bcma/bcma_private.h b/drivers/bcma/bcma_private.h
new file mode 100644
index 0000000..2f72e9c
--- /dev/null
+++ b/drivers/bcma/bcma_private.h
@@ -0,0 +1,28 @@ 
+#ifndef LINUX_BCMA_PRIVATE_H_
+#define LINUX_BCMA_PRIVATE_H_
+
+#ifndef pr_fmt
+#define pr_fmt(fmt)		KBUILD_MODNAME ": " fmt
+#endif
+
+#include <linux/bcma/bcma.h>
+#include <linux/delay.h>
+
+#define BCMA_CORE_SIZE		0x1000
+
+struct bcma_bus;
+
+/* main.c */
+extern int bcma_bus_register(struct bcma_bus *bus);
+extern void bcma_bus_unregister(struct bcma_bus *bus);
+
+/* scan.c */
+int bcma_bus_scan(struct bcma_bus *bus);
+
+#ifdef CONFIG_BCMA_HOST_PCI
+/* host_pci.c */
+extern int __init bcma_host_pci_init(void);
+extern void __exit bcma_host_pci_exit(void);
+#endif /* CONFIG_BCMA_HOST_PCI */
+
+#endif
diff --git a/drivers/bcma/core.c b/drivers/bcma/core.c
new file mode 100644
index 0000000..ced379f
--- /dev/null
+++ b/drivers/bcma/core.c
@@ -0,0 +1,51 @@ 
+/*
+ * Broadcom specific AMBA
+ * Core ops
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcma_private.h"
+#include <linux/bcma/bcma.h>
+
+bool bcma_core_is_enabled(struct bcma_device *core)
+{
+	if ((bcma_aread32(core, BCMA_IOCTL) & (BCMA_IOCTL_CLK | BCMA_IOCTL_FGC))
+	    != BCMA_IOCTL_CLK)
+		return false;
+	if (bcma_aread32(core, BCMA_RESET_CTL) & BCMA_RESET_CTL_RESET)
+		return false;
+	return true;
+}
+EXPORT_SYMBOL_GPL(bcma_core_is_enabled);
+
+static void bcma_core_disable(struct bcma_device *core, u32 flags)
+{
+	if (bcma_aread32(core, BCMA_RESET_CTL) & BCMA_RESET_CTL_RESET)
+		return;
+
+	bcma_awrite32(core, BCMA_IOCTL, flags);
+	bcma_aread32(core, BCMA_IOCTL);
+	udelay(10);
+
+	bcma_awrite32(core, BCMA_RESET_CTL, BCMA_RESET_CTL_RESET);
+	udelay(1);
+}
+
+int bcma_core_enable(struct bcma_device *core, u32 flags)
+{
+	bcma_core_disable(core, flags);
+
+	bcma_awrite32(core, BCMA_IOCTL, (BCMA_IOCTL_CLK | BCMA_IOCTL_FGC | flags));
+	bcma_aread32(core, BCMA_IOCTL);
+
+	bcma_awrite32(core, BCMA_RESET_CTL, 0);
+	udelay(1);
+
+	bcma_awrite32(core, BCMA_IOCTL, (BCMA_IOCTL_CLK | flags));
+	bcma_aread32(core, BCMA_IOCTL);
+	udelay(1);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(bcma_core_enable);
diff --git a/drivers/bcma/driver_chipcommon.c b/drivers/bcma/driver_chipcommon.c
new file mode 100644
index 0000000..caf5960
--- /dev/null
+++ b/drivers/bcma/driver_chipcommon.c
@@ -0,0 +1,87 @@ 
+/*
+ * Broadcom specific AMBA
+ * ChipCommon core driver
+ *
+ * Copyright 2005, Broadcom Corporation
+ * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcma_private.h"
+#include <linux/bcma/bcma.h>
+
+static inline u32 bcma_cc_write32_masked(struct bcma_drv_cc *cc, u16 offset,
+					 u32 mask, u32 value)
+{
+	value &= mask;
+	value |= bcma_cc_read32(cc, offset) & ~mask;
+	bcma_cc_write32(cc, offset, value);
+
+	return value;
+}
+
+void bcma_core_chipcommon_init(struct bcma_drv_cc *cc)
+{
+	if (cc->core->id.rev >= 11)
+		cc->status = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT);
+	cc->capabilities = bcma_cc_read32(cc, BCMA_CC_CAP);
+	if (cc->core->id.rev >= 35)
+		cc->capabilities_ext = bcma_cc_read32(cc, BCMA_CC_CAP_EXT);
+
+	bcma_cc_write32(cc, 0x58, 0);
+	bcma_cc_write32(cc, 0x5C, 0);
+
+	if (cc->capabilities & BCMA_CC_CAP_PMU)
+		bcma_pmu_init(cc);
+	if (cc->capabilities & BCMA_CC_CAP_PCTL)
+		pr_err("Power control not implemented!\n");
+}
+
+/* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */
+void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks)
+{
+	/* instant NMI */
+	bcma_cc_write32(cc, BCMA_CC_WATCHDOG, ticks);
+}
+
+void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value)
+{
+	bcma_cc_write32_masked(cc, BCMA_CC_IRQMASK, mask, value);
+}
+
+u32 bcma_chipco_irq_status(struct bcma_drv_cc *cc, u32 mask)
+{
+	return bcma_cc_read32(cc, BCMA_CC_IRQSTAT) & mask;
+}
+
+u32 bcma_chipco_gpio_in(struct bcma_drv_cc *cc, u32 mask)
+{
+	return bcma_cc_read32(cc, BCMA_CC_GPIOIN) & mask;
+}
+
+u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value)
+{
+	return bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUT, mask, value);
+}
+
+u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value)
+{
+	return bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUTEN, mask, value);
+}
+
+u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value)
+{
+	return bcma_cc_write32_masked(cc, BCMA_CC_GPIOCTL, mask, value);
+}
+EXPORT_SYMBOL_GPL(bcma_chipco_gpio_control);
+
+u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value)
+{
+	return bcma_cc_write32_masked(cc, BCMA_CC_GPIOIRQ, mask, value);
+}
+
+u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value)
+{
+	return bcma_cc_write32_masked(cc, BCMA_CC_GPIOPOL, mask, value);
+}
diff --git a/drivers/bcma/driver_chipcommon_pmu.c b/drivers/bcma/driver_chipcommon_pmu.c
new file mode 100644
index 0000000..f44177a
--- /dev/null
+++ b/drivers/bcma/driver_chipcommon_pmu.c
@@ -0,0 +1,134 @@ 
+/*
+ * Broadcom specific AMBA
+ * ChipCommon Power Management Unit driver
+ *
+ * Copyright 2009, Michael Buesch <mb@bu3sch.de>
+ * Copyright 2007, Broadcom Corporation
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcma_private.h"
+#include <linux/bcma/bcma.h>
+
+static void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc,
+					u32 offset, u32 mask, u32 set)
+{
+	u32 value;
+
+	bcma_cc_read32(cc, BCMA_CC_CHIPCTL_ADDR);
+	bcma_cc_write32(cc, BCMA_CC_CHIPCTL_ADDR, offset);
+	bcma_cc_read32(cc, BCMA_CC_CHIPCTL_ADDR);
+	value = bcma_cc_read32(cc, BCMA_CC_CHIPCTL_DATA);
+	value &= mask;
+	value |= set;
+	bcma_cc_write32(cc, BCMA_CC_CHIPCTL_DATA, value);
+	bcma_cc_read32(cc, BCMA_CC_CHIPCTL_DATA);
+}
+
+static void bcma_pmu_pll_init(struct bcma_drv_cc *cc)
+{
+	struct bcma_bus *bus = cc->core->bus;
+
+	switch (bus->chipinfo.id) {
+	case 0x4313:
+	case 0x4331:
+	case 43224:
+	case 43225:
+		break;
+	default:
+		pr_err("PLL init unknown for device 0x%04X\n",
+			bus->chipinfo.id);
+	}
+}
+
+static void bcma_pmu_resources_init(struct bcma_drv_cc *cc)
+{
+	struct bcma_bus *bus = cc->core->bus;
+	u32 min_msk = 0, max_msk = 0;
+
+	switch (bus->chipinfo.id) {
+	case 0x4313:
+		min_msk = 0x200D;
+		max_msk = 0xFFFF;
+		break;
+	case 43224:
+		break;
+	default:
+		pr_err("PMU resource config unknown for device 0x%04X\n",
+			bus->chipinfo.id);
+	}
+
+	/* Set the resource masks. */
+	if (min_msk)
+		bcma_cc_write32(cc, BCMA_CC_PMU_MINRES_MSK, min_msk);
+	if (max_msk)
+		bcma_cc_write32(cc, BCMA_CC_PMU_MAXRES_MSK, max_msk);
+}
+
+void bcma_pmu_swreg_init(struct bcma_drv_cc *cc)
+{
+	struct bcma_bus *bus = cc->core->bus;
+
+	switch (bus->chipinfo.id) {
+	case 0x4313:
+	case 0x4331:
+	case 43224:
+		break;
+	default:
+		pr_err("PMU switch/regulators init unknown for device "
+			"0x%04X\n", bus->chipinfo.id);
+	}
+}
+
+void bcma_pmu_workarounds(struct bcma_drv_cc *cc)
+{
+	struct bcma_bus *bus = cc->core->bus;
+
+	switch (bus->chipinfo.id) {
+	case 0x4313:
+		bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x7);
+		break;
+	case 0x4331:
+		pr_err("Enabling Ext PA lines not implemented\n");
+		break;
+	case 43224:
+		if (bus->chipinfo.rev == 0) {
+			pr_err("Workarounds for 43224 rev 0 not fully "
+				"implemented\n");
+			bcma_chipco_chipctl_maskset(cc, 0, ~0, 0xF0);
+		} else {
+			bcma_chipco_chipctl_maskset(cc, 0, ~0, 0xF0);
+		}
+		break;
+	default:
+		pr_err("Workarounds unknown for device 0x%04X\n",
+			bus->chipinfo.id);
+	}
+}
+
+void bcma_pmu_init(struct bcma_drv_cc *cc)
+{
+	u32 pmucap;
+
+	pmucap = bcma_cc_read32(cc, BCMA_CC_PMU_CAP);
+	cc->pmu.rev = (pmucap & BCMA_CC_PMU_CAP_REVISION);
+
+	pr_debug("Found rev %u PMU (capabilities 0x%08X)\n", cc->pmu.rev,
+		 pmucap);
+
+	if (cc->pmu.rev == 1)
+		bcma_cc_mask32(cc, BCMA_CC_PMU_CTL,
+			      ~BCMA_CC_PMU_CTL_NOILPONW);
+	else
+		bcma_cc_set32(cc, BCMA_CC_PMU_CTL,
+			     BCMA_CC_PMU_CTL_NOILPONW);
+
+	if (cc->core->id.id == 0x4329 && cc->core->id.rev == 2)
+		pr_err("Fix for 4329b0 bad LPOM state not implemented!\n");
+
+	bcma_pmu_pll_init(cc);
+	bcma_pmu_resources_init(cc);
+	bcma_pmu_swreg_init(cc);
+	bcma_pmu_workarounds(cc);
+}
diff --git a/drivers/bcma/driver_pci.c b/drivers/bcma/driver_pci.c
new file mode 100644
index 0000000..b98b835
--- /dev/null
+++ b/drivers/bcma/driver_pci.c
@@ -0,0 +1,163 @@ 
+/*
+ * Broadcom specific AMBA
+ * PCI Core
+ *
+ * Copyright 2005, Broadcom Corporation
+ * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcma_private.h"
+#include <linux/bcma/bcma.h>
+
+/**************************************************
+ * R/W ops.
+ **************************************************/
+
+static u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address)
+{
+	pcicore_write32(pc, 0x130, address);
+	pcicore_read32(pc, 0x130);
+	return pcicore_read32(pc, 0x134);
+}
+
+#if 0
+static void bcma_pcie_write(struct bcma_drv_pci *pc, u32 address, u32 data)
+{
+	pcicore_write32(pc, 0x130, address);
+	pcicore_read32(pc, 0x130);
+	pcicore_write32(pc, 0x134, data);
+}
+#endif
+
+static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u8 phy)
+{
+	const u16 mdio_control = 0x128;
+	const u16 mdio_data = 0x12C;
+	u32 v;
+	int i;
+
+	v = (1 << 30); /* Start of Transaction */
+	v |= (1 << 28); /* Write Transaction */
+	v |= (1 << 17); /* Turnaround */
+	v |= (0x1F << 18);
+	v |= (phy << 4);
+	pcicore_write32(pc, mdio_data, v);
+
+	udelay(10);
+	for (i = 0; i < 200; i++) {
+		v = pcicore_read32(pc, mdio_control);
+		if (v & 0x100 /* Trans complete */)
+			break;
+		msleep(1);
+	}
+}
+
+static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u8 device, u8 address)
+{
+	const u16 mdio_control = 0x128;
+	const u16 mdio_data = 0x12C;
+	int max_retries = 10;
+	u16 ret = 0;
+	u32 v;
+	int i;
+
+	v = 0x80; /* Enable Preamble Sequence */
+	v |= 0x2; /* MDIO Clock Divisor */
+	pcicore_write32(pc, mdio_control, v);
+
+	if (pc->core->id.rev >= 10) {
+		max_retries = 200;
+		bcma_pcie_mdio_set_phy(pc, device);
+	}
+
+	v = (1 << 30); /* Start of Transaction */
+	v |= (1 << 29); /* Read Transaction */
+	v |= (1 << 17); /* Turnaround */
+	if (pc->core->id.rev < 10)
+		v |= (u32)device << 22;
+	v |= (u32)address << 18;
+	pcicore_write32(pc, mdio_data, v);
+	/* Wait for the device to complete the transaction */
+	udelay(10);
+	for (i = 0; i < 200; i++) {
+		v = pcicore_read32(pc, mdio_control);
+		if (v & 0x100 /* Trans complete */) {
+			udelay(10);
+			ret = pcicore_read32(pc, mdio_data);
+			break;
+		}
+		msleep(1);
+	}
+	pcicore_write32(pc, mdio_control, 0);
+	return ret;
+}
+
+static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u8 device,
+				u8 address, u16 data)
+{
+	const u16 mdio_control = 0x128;
+	const u16 mdio_data = 0x12C;
+	int max_retries = 10;
+	u32 v;
+	int i;
+
+	v = 0x80; /* Enable Preamble Sequence */
+	v |= 0x2; /* MDIO Clock Divisor */
+	pcicore_write32(pc, mdio_control, v);
+
+	if (pc->core->id.rev >= 10) {
+		max_retries = 200;
+		bcma_pcie_mdio_set_phy(pc, device);
+	}
+
+	v = (1 << 30); /* Start of Transaction */
+	v |= (1 << 28); /* Write Transaction */
+	v |= (1 << 17); /* Turnaround */
+	if (pc->core->id.rev < 10)
+		v |= (u32)device << 22;
+	v |= (u32)address << 18;
+	v |= data;
+	pcicore_write32(pc, mdio_data, v);
+	/* Wait for the device to complete the transaction */
+	udelay(10);
+	for (i = 0; i < max_retries; i++) {
+		v = pcicore_read32(pc, mdio_control);
+		if (v & 0x100 /* Trans complete */)
+			break;
+		msleep(1);
+	}
+	pcicore_write32(pc, mdio_control, 0);
+}
+
+/**************************************************
+ * Workarounds.
+ **************************************************/
+
+static u8 bcma_pcicore_polarity_workaround(struct bcma_drv_pci *pc)
+{
+	return (bcma_pcie_read(pc, 0x204) & 0x10) ? 0xC0 : 0x80;
+}
+
+static void bcma_pcicore_serdes_workaround(struct bcma_drv_pci *pc)
+{
+	const u8 serdes_pll_device = 0x1D;
+	const u8 serdes_rx_device = 0x1F;
+	u16 tmp;
+
+	bcma_pcie_mdio_write(pc, serdes_rx_device, 1 /* Control */,
+			      bcma_pcicore_polarity_workaround(pc));
+	tmp = bcma_pcie_mdio_read(pc, serdes_pll_device, 1 /* Control */);
+	if (tmp & 0x4000)
+		bcma_pcie_mdio_write(pc, serdes_pll_device, 1, tmp & ~0x4000);
+}
+
+/**************************************************
+ * Init.
+ **************************************************/
+
+void bcma_core_pci_init(struct bcma_drv_pci *pc)
+{
+	bcma_pcicore_serdes_workaround(pc);
+}
diff --git a/drivers/bcma/host_pci.c b/drivers/bcma/host_pci.c
new file mode 100644
index 0000000..99dd36e
--- /dev/null
+++ b/drivers/bcma/host_pci.c
@@ -0,0 +1,196 @@ 
+/*
+ * Broadcom specific AMBA
+ * PCI Host
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcma_private.h"
+#include <linux/bcma/bcma.h>
+#include <linux/pci.h>
+
+static void bcma_host_pci_switch_core(struct bcma_device *core)
+{
+	pci_write_config_dword(core->bus->host_pci, BCMA_PCI_BAR0_WIN,
+			       core->addr);
+	pci_write_config_dword(core->bus->host_pci, BCMA_PCI_BAR0_WIN2,
+			       core->wrap);
+	core->bus->mapped_core = core;
+	pr_debug("Switched to core: 0x%X\n", core->id.id);
+}
+
+static u8 bcma_host_pci_read8(struct bcma_device *core, u16 offset)
+{
+	if (core->bus->mapped_core != core)
+		bcma_host_pci_switch_core(core);
+	return ioread8(core->bus->mmio + offset);
+}
+
+static u16 bcma_host_pci_read16(struct bcma_device *core, u16 offset)
+{
+	if (core->bus->mapped_core != core)
+		bcma_host_pci_switch_core(core);
+	return ioread16(core->bus->mmio + offset);
+}
+
+static u32 bcma_host_pci_read32(struct bcma_device *core, u16 offset)
+{
+	if (core->bus->mapped_core != core)
+		bcma_host_pci_switch_core(core);
+	return ioread32(core->bus->mmio + offset);
+}
+
+static void bcma_host_pci_write8(struct bcma_device *core, u16 offset,
+				 u8 value)
+{
+	if (core->bus->mapped_core != core)
+		bcma_host_pci_switch_core(core);
+	iowrite8(value, core->bus->mmio + offset);
+}
+
+static void bcma_host_pci_write16(struct bcma_device *core, u16 offset,
+				 u16 value)
+{
+	if (core->bus->mapped_core != core)
+		bcma_host_pci_switch_core(core);
+	iowrite16(value, core->bus->mmio + offset);
+}
+
+static void bcma_host_pci_write32(struct bcma_device *core, u16 offset,
+				 u32 value)
+{
+	if (core->bus->mapped_core != core)
+		bcma_host_pci_switch_core(core);
+	iowrite32(value, core->bus->mmio + offset);
+}
+
+static u32 bcma_host_pci_aread32(struct bcma_device *core, u16 offset)
+{
+	if (core->bus->mapped_core != core)
+		bcma_host_pci_switch_core(core);
+	return ioread32(core->bus->mmio + (1 * BCMA_CORE_SIZE) + offset);
+}
+
+static void bcma_host_pci_awrite32(struct bcma_device *core, u16 offset,
+				  u32 value)
+{
+	if (core->bus->mapped_core != core)
+		bcma_host_pci_switch_core(core);
+	iowrite32(value, core->bus->mmio + (1 * BCMA_CORE_SIZE) + offset);
+}
+
+const struct bcma_host_ops bcma_host_pci_ops = {
+	.read8		= bcma_host_pci_read8,
+	.read16		= bcma_host_pci_read16,
+	.read32		= bcma_host_pci_read32,
+	.write8		= bcma_host_pci_write8,
+	.write16	= bcma_host_pci_write16,
+	.write32	= bcma_host_pci_write32,
+	.aread32	= bcma_host_pci_aread32,
+	.awrite32	= bcma_host_pci_awrite32,
+};
+
+static int bcma_host_pci_probe(struct pci_dev *dev,
+			     const struct pci_device_id *id)
+{
+	struct bcma_bus *bus;
+	int err = -ENOMEM;
+	const char *name;
+	u32 val;
+
+	/* Alloc */
+	bus = kzalloc(sizeof(*bus), GFP_KERNEL);
+	if (!bus)
+		goto out;
+
+	/* Basic PCI configuration */
+	err = pci_enable_device(dev);
+	if (err)
+		goto err_kfree_bus;
+
+	name = dev_name(&dev->dev);
+	if (dev->driver && dev->driver->name)
+		name = dev->driver->name;
+	err = pci_request_regions(dev, name);
+	if (err)
+		goto err_pci_disable;
+	pci_set_master(dev);
+
+	/* Disable the RETRY_TIMEOUT register (0x41) to keep
+	 * PCI Tx retries from interfering with C3 CPU state */
+	pci_read_config_dword(dev, 0x40, &val);
+	if ((val & 0x0000ff00) != 0)
+		pci_write_config_dword(dev, 0x40, val & 0xffff00ff);
+
+	/* SSB needed additional powering up, do we have any AMBA PCI cards? */
+	if (!pci_is_pcie(dev))
+		pr_err("PCI card detected, report problems.\n");
+
+	/* Map MMIO */
+	err = -ENOMEM;
+	bus->mmio = pci_iomap(dev, 0, ~0UL);
+	if (!bus->mmio)
+		goto err_pci_release_regions;
+
+	/* Host specific */
+	bus->host_pci = dev;
+	bus->hosttype = BCMA_HOSTTYPE_PCI;
+	bus->ops = &bcma_host_pci_ops;
+
+	/* Register */
+	err = bcma_bus_register(bus);
+	if (err)
+		goto err_pci_unmap_mmio;
+
+	pci_set_drvdata(dev, bus);
+
+out:
+	return err;
+
+err_pci_unmap_mmio:
+	pci_iounmap(dev, bus->mmio);
+err_pci_release_regions:
+	pci_release_regions(dev);
+err_pci_disable:
+	pci_disable_device(dev);
+err_kfree_bus:
+	kfree(bus);
+	return err;
+}
+
+static void bcma_host_pci_remove(struct pci_dev *dev)
+{
+	struct bcma_bus *bus = pci_get_drvdata(dev);
+
+	bcma_bus_unregister(bus);
+	pci_iounmap(dev, bus->mmio);
+	pci_release_regions(dev);
+	pci_disable_device(dev);
+	kfree(bus);
+	pci_set_drvdata(dev, NULL);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4331) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4353) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) },
+	{ 0, },
+};
+MODULE_DEVICE_TABLE(pci, bcma_pci_bridge_tbl);
+
+static struct pci_driver bcma_pci_bridge_driver = {
+	.name = "bcma-pci-bridge",
+	.id_table = bcma_pci_bridge_tbl,
+	.probe = bcma_host_pci_probe,
+	.remove = bcma_host_pci_remove,
+};
+
+int __init bcma_host_pci_init(void)
+{
+	return pci_register_driver(&bcma_pci_bridge_driver);
+}
+
+void __exit bcma_host_pci_exit(void)
+{
+	pci_unregister_driver(&bcma_pci_bridge_driver);
+}
diff --git a/drivers/bcma/main.c b/drivers/bcma/main.c
new file mode 100644
index 0000000..be52344
--- /dev/null
+++ b/drivers/bcma/main.c
@@ -0,0 +1,247 @@ 
+/*
+ * Broadcom specific AMBA
+ * Bus subsystem
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcma_private.h"
+#include <linux/bcma/bcma.h>
+
+MODULE_DESCRIPTION("Broadcom's specific AMBA driver");
+MODULE_LICENSE("GPL");
+
+static int bcma_bus_match(struct device *dev, struct device_driver *drv);
+static int bcma_device_probe(struct device *dev);
+static int bcma_device_remove(struct device *dev);
+
+static ssize_t manuf_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct bcma_device *core = container_of(dev, struct bcma_device, dev);
+	return sprintf(buf, "0x%03X\n", core->id.manuf);
+}
+static ssize_t id_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct bcma_device *core = container_of(dev, struct bcma_device, dev);
+	return sprintf(buf, "0x%03X\n", core->id.id);
+}
+static ssize_t rev_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct bcma_device *core = container_of(dev, struct bcma_device, dev);
+	return sprintf(buf, "0x%02X\n", core->id.rev);
+}
+static ssize_t class_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct bcma_device *core = container_of(dev, struct bcma_device, dev);
+	return sprintf(buf, "0x%X\n", core->id.class);
+}
+static struct device_attribute bcma_device_attrs[] = {
+	__ATTR_RO(manuf),
+	__ATTR_RO(id),
+	__ATTR_RO(rev),
+	__ATTR_RO(class),
+	__ATTR_NULL,
+};
+
+static struct bus_type bcma_bus_type = {
+	.name		= "bcma",
+	.match		= bcma_bus_match,
+	.probe		= bcma_device_probe,
+	.remove		= bcma_device_remove,
+	.dev_attrs	= bcma_device_attrs,
+};
+
+static struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid)
+{
+	struct bcma_device *core;
+
+	list_for_each_entry(core, &bus->cores, list) {
+		if (core->id.id == coreid)
+			return core;
+	}
+	return NULL;
+}
+
+static void bcma_release_core_dev(struct device *dev)
+{
+	struct bcma_device *core = container_of(dev, struct bcma_device, dev);
+	kfree(core);
+}
+
+static int bcma_register_cores(struct bcma_bus *bus)
+{
+	struct bcma_device *core;
+	int err, dev_id = 0;
+
+	list_for_each_entry(core, &bus->cores, list) {
+		/* We support that cores ourself */
+		switch (core->id.id) {
+		case BCMA_CORE_CHIPCOMMON:
+		case BCMA_CORE_PCI:
+		case BCMA_CORE_PCIE:
+			continue;
+		}
+
+		core->dev.release = bcma_release_core_dev;
+		core->dev.bus = &bcma_bus_type;
+		dev_set_name(&core->dev, "bcma%d:%d", 0/*bus->num*/, dev_id);
+
+		switch (bus->hosttype) {
+		case BCMA_HOSTTYPE_PCI:
+			core->dev.parent = &bus->host_pci->dev;
+			break;
+		case BCMA_HOSTTYPE_NONE:
+		case BCMA_HOSTTYPE_SDIO:
+			break;
+		}
+
+		err = device_register(&core->dev);
+		if (err) {
+			pr_err("Could not register dev for core 0x%03X\n",
+			       core->id.id);
+			continue;
+		}
+		core->dev_registered = true;
+		dev_id++;
+	}
+
+	return 0;
+}
+
+static void bcma_unregister_cores(struct bcma_bus *bus)
+{
+	struct bcma_device *core;
+
+	list_for_each_entry(core, &bus->cores, list) {
+		if (core->dev_registered)
+			device_unregister(&core->dev);
+	}
+}
+
+int bcma_bus_register(struct bcma_bus *bus)
+{
+	int err;
+	struct bcma_device *core;
+
+	/* Scan for devices (cores) */
+	err = bcma_bus_scan(bus);
+	if (err) {
+		pr_err("Failed to scan: %d\n", err);
+		return -1;
+	}
+
+	/* Init CC core */
+	core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON);
+	if (core) {
+		bus->drv_cc.core = core;
+		bcma_core_chipcommon_init(&bus->drv_cc);
+	}
+
+	/* Init PCIE core */
+	core = bcma_find_core(bus, BCMA_CORE_PCIE);
+	if (core) {
+		bus->drv_pci.core = core;
+		bcma_core_pci_init(&bus->drv_pci);
+	}
+
+	/* Register found cores */
+	bcma_register_cores(bus);
+
+	pr_info("Bus registered\n");
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(bcma_bus_register);
+
+void bcma_bus_unregister(struct bcma_bus *bus)
+{
+	bcma_unregister_cores(bus);
+}
+EXPORT_SYMBOL_GPL(bcma_bus_unregister);
+
+int __bcma_driver_register(struct bcma_driver *drv, struct module *owner)
+{
+	drv->drv.name = drv->name;
+	drv->drv.bus = &bcma_bus_type;
+	drv->drv.owner = owner;
+
+	return driver_register(&drv->drv);
+}
+EXPORT_SYMBOL_GPL(__bcma_driver_register);
+
+void bcma_driver_unregister(struct bcma_driver *drv)
+{
+	driver_unregister(&drv->drv);
+}
+EXPORT_SYMBOL_GPL(bcma_driver_unregister);
+
+static int bcma_bus_match(struct device *dev, struct device_driver *drv)
+{
+	struct bcma_device *core = container_of(dev, struct bcma_device, dev);
+	struct bcma_driver *adrv = container_of(drv, struct bcma_driver, drv);
+	const struct bcma_device_id *cid = &core->id;
+	const struct bcma_device_id *did;
+
+	for (did = adrv->id_table; did->manuf || did->id || did->rev; did++) {
+	    if ((did->manuf == cid->manuf || did->manuf == BCMA_ANY_MANUF) &&
+		(did->id == cid->id || did->id == BCMA_ANY_ID) &&
+		(did->rev == cid->rev || did->rev == BCMA_ANY_REV) &&
+		(did->class == cid->class || did->class == BCMA_ANY_CLASS))
+			return 1;
+	}
+	return 0;
+}
+
+static int bcma_device_probe(struct device *dev)
+{
+	struct bcma_device *core = container_of(dev, struct bcma_device, dev);
+	struct bcma_driver *adrv = container_of(dev->driver, struct bcma_driver,
+					       drv);
+	int err = 0;
+
+	if (adrv->probe)
+		err = adrv->probe(core);
+
+	return err;
+}
+
+static int bcma_device_remove(struct device *dev)
+{
+	struct bcma_device *core = container_of(dev, struct bcma_device, dev);
+	struct bcma_driver *adrv = container_of(dev->driver, struct bcma_driver,
+					       drv);
+
+	if (adrv->remove)
+		adrv->remove(core);
+
+	return 0;
+}
+
+static int __init bcma_modinit(void)
+{
+	int err;
+
+	err = bus_register(&bcma_bus_type);
+	if (err)
+		return err;
+
+#ifdef CONFIG_BCMA_HOST_PCI
+	err = bcma_host_pci_init();
+	if (err) {
+		pr_err("PCI host initialization failed\n");
+		err = 0;
+	}
+#endif
+
+	return err;
+}
+fs_initcall(bcma_modinit);
+
+static void __exit bcma_modexit(void)
+{
+#ifdef CONFIG_BCMA_HOST_PCI
+	bcma_host_pci_exit();
+#endif
+	bus_unregister(&bcma_bus_type);
+}
+module_exit(bcma_modexit)
diff --git a/drivers/bcma/scan.c b/drivers/bcma/scan.c
new file mode 100644
index 0000000..40d7dcc
--- /dev/null
+++ b/drivers/bcma/scan.c
@@ -0,0 +1,360 @@ 
+/*
+ * Broadcom specific AMBA
+ * Bus scanning
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "scan.h"
+#include "bcma_private.h"
+
+#include <linux/bcma/bcma.h>
+#include <linux/bcma/bcma_regs.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+
+struct bcma_device_id_name {
+	u16 id;
+	const char *name;
+};
+struct bcma_device_id_name bcma_device_names[] = {
+	{ BCMA_CORE_OOB_ROUTER, "OOB Router" },
+	{ BCMA_CORE_INVALID, "Invalid" },
+	{ BCMA_CORE_CHIPCOMMON, "ChipCommon" },
+	{ BCMA_CORE_ILINE20, "ILine 20" },
+	{ BCMA_CORE_SRAM, "SRAM" },
+	{ BCMA_CORE_SDRAM, "SDRAM" },
+	{ BCMA_CORE_PCI, "PCI" },
+	{ BCMA_CORE_MIPS, "MIPS" },
+	{ BCMA_CORE_ETHERNET, "Fast Ethernet" },
+	{ BCMA_CORE_V90, "V90" },
+	{ BCMA_CORE_USB11_HOSTDEV, "USB 1.1 Hostdev" },
+	{ BCMA_CORE_ADSL, "ADSL" },
+	{ BCMA_CORE_ILINE100, "ILine 100" },
+	{ BCMA_CORE_IPSEC, "IPSEC" },
+	{ BCMA_CORE_UTOPIA, "UTOPIA" },
+	{ BCMA_CORE_PCMCIA, "PCMCIA" },
+	{ BCMA_CORE_INTERNAL_MEM, "Internal Memory" },
+	{ BCMA_CORE_MEMC_SDRAM, "MEMC SDRAM" },
+	{ BCMA_CORE_OFDM, "OFDM" },
+	{ BCMA_CORE_EXTIF, "EXTIF" },
+	{ BCMA_CORE_80211, "IEEE 802.11" },
+	{ BCMA_CORE_PHY_A, "PHY A" },
+	{ BCMA_CORE_PHY_B, "PHY B" },
+	{ BCMA_CORE_PHY_G, "PHY G" },
+	{ BCMA_CORE_MIPS_3302, "MIPS 3302" },
+	{ BCMA_CORE_USB11_HOST, "USB 1.1 Host" },
+	{ BCMA_CORE_USB11_DEV, "USB 1.1 Device" },
+	{ BCMA_CORE_USB20_HOST, "USB 2.0 Host" },
+	{ BCMA_CORE_USB20_DEV, "USB 2.0 Device" },
+	{ BCMA_CORE_SDIO_HOST, "SDIO Host" },
+	{ BCMA_CORE_ROBOSWITCH, "Roboswitch" },
+	{ BCMA_CORE_PARA_ATA, "PATA" },
+	{ BCMA_CORE_SATA_XORDMA, "SATA XOR-DMA" },
+	{ BCMA_CORE_ETHERNET_GBIT, "GBit Ethernet" },
+	{ BCMA_CORE_PCIE, "PCIe" },
+	{ BCMA_CORE_PHY_N, "PHY N" },
+	{ BCMA_CORE_SRAM_CTL, "SRAM Controller" },
+	{ BCMA_CORE_MINI_MACPHY, "Mini MACPHY" },
+	{ BCMA_CORE_ARM_1176, "ARM 1176" },
+	{ BCMA_CORE_ARM_7TDMI, "ARM 7TDMI" },
+	{ BCMA_CORE_PHY_LP, "PHY LP" },
+	{ BCMA_CORE_PMU, "PMU" },
+	{ BCMA_CORE_PHY_SSN, "PHY SSN" },
+	{ BCMA_CORE_SDIO_DEV, "SDIO Device" },
+	{ BCMA_CORE_ARM_CM3, "ARM CM3" },
+	{ BCMA_CORE_PHY_HT, "PHY HT" },
+	{ BCMA_CORE_MIPS_74K, "MIPS 74K" },
+	{ BCMA_CORE_MAC_GBIT, "GBit MAC" },
+	{ BCMA_CORE_DDR12_MEM_CTL, "DDR1/DDR2 Memory Controller" },
+	{ BCMA_CORE_PCIE_RC, "PCIe Root Complex" },
+	{ BCMA_CORE_OCP_OCP_BRIDGE, "OCP to OCP Bridge" },
+	{ BCMA_CORE_SHARED_COMMON, "Common Shared" },
+	{ BCMA_CORE_OCP_AHB_BRIDGE, "OCP to AHB Bridge" },
+	{ BCMA_CORE_SPI_HOST, "SPI Host" },
+	{ BCMA_CORE_I2S, "I2S" },
+	{ BCMA_CORE_SDR_DDR1_MEM_CTL, "SDR/DDR1 Memory Controller" },
+	{ BCMA_CORE_SHIM, "SHIM" },
+	{ BCMA_CORE_DEFAULT, "Default" },
+};
+const char *bcma_device_name(struct bcma_device_id *id)
+{
+	int i;
+
+	if (id->manuf == BCMA_MANUF_BCM) {
+		for (i = 0; i < ARRAY_SIZE(bcma_device_names); i++) {
+			if (bcma_device_names[i].id == id->id)
+				return bcma_device_names[i].name;
+		}
+	}
+	return "UNKNOWN";
+}
+
+static u32 bcma_scan_read32(struct bcma_bus *bus, u8 current_coreidx,
+		       u16 offset)
+{
+	return readl(bus->mmio + offset);
+}
+
+static void bcma_scan_switch_core(struct bcma_bus *bus, u32 addr)
+{
+	if (bus->hosttype == BCMA_HOSTTYPE_PCI)
+		pci_write_config_dword(bus->host_pci, BCMA_PCI_BAR0_WIN,
+				       addr);
+}
+
+static u32 bcma_erom_get_ent(struct bcma_bus *bus, u32 **eromptr)
+{
+	u32 ent = readl(*eromptr);
+	(*eromptr)++;
+	return ent;
+}
+
+static void bcma_erom_push_ent(u32 **eromptr)
+{
+	(*eromptr)--;
+}
+
+static s32 bcma_erom_get_ci(struct bcma_bus *bus, u32 **eromptr)
+{
+	u32 ent = bcma_erom_get_ent(bus, eromptr);
+	if (!(ent & SCAN_ER_VALID))
+		return -ENOENT;
+	if ((ent & SCAN_ER_TAG) != SCAN_ER_TAG_CI)
+		return -ENOENT;
+	return ent;
+}
+
+static bool bcma_erom_is_end(struct bcma_bus *bus, u32 **eromptr)
+{
+	u32 ent = bcma_erom_get_ent(bus, eromptr);
+	bcma_erom_push_ent(eromptr);
+	return (ent == (SCAN_ER_TAG_END | SCAN_ER_VALID));
+}
+
+static bool bcma_erom_is_bridge(struct bcma_bus *bus, u32 **eromptr)
+{
+	u32 ent = bcma_erom_get_ent(bus, eromptr);
+	bcma_erom_push_ent(eromptr);
+	return (((ent & SCAN_ER_VALID)) &&
+		((ent & SCAN_ER_TAGX) == SCAN_ER_TAG_ADDR) &&
+		((ent & SCAN_ADDR_TYPE) == SCAN_ADDR_TYPE_BRIDGE));
+}
+
+static void bcma_erom_skip_component(struct bcma_bus *bus, u32 **eromptr)
+{
+	u32 ent;
+	while (1) {
+		ent = bcma_erom_get_ent(bus, eromptr);
+		if ((ent & SCAN_ER_VALID) &&
+		    ((ent & SCAN_ER_TAG) == SCAN_ER_TAG_CI))
+			break;
+		if (ent == (SCAN_ER_TAG_END | SCAN_ER_VALID))
+			break;
+	}
+	bcma_erom_push_ent(eromptr);
+}
+
+static s32 bcma_erom_get_mst_port(struct bcma_bus *bus, u32 **eromptr)
+{
+	u32 ent = bcma_erom_get_ent(bus, eromptr);
+	if (!(ent & SCAN_ER_VALID))
+		return -ENOENT;
+	if ((ent & SCAN_ER_TAG) != SCAN_ER_TAG_MP)
+		return -ENOENT;
+	return ent;
+}
+
+static s32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 **eromptr,
+				  u32 type, u8 port)
+{
+	u32 addrl, addrh, sizel, sizeh = 0;
+	u32 size;
+
+	u32 ent = bcma_erom_get_ent(bus, eromptr);
+	if ((!(ent & SCAN_ER_VALID)) ||
+	    ((ent & SCAN_ER_TAGX) != SCAN_ER_TAG_ADDR) ||
+	    ((ent & SCAN_ADDR_TYPE) != type) ||
+	    (((ent & SCAN_ADDR_PORT) >> SCAN_ADDR_PORT_SHIFT) != port)) {
+		bcma_erom_push_ent(eromptr);
+		return -EINVAL;
+	}
+
+	addrl = ent & SCAN_ADDR_ADDR;
+	if (ent & SCAN_ADDR_AG32)
+		addrh = bcma_erom_get_ent(bus, eromptr);
+	else
+		addrh = 0;
+
+	if ((ent & SCAN_ADDR_SZ) == SCAN_ADDR_SZ_SZD) {
+		size = bcma_erom_get_ent(bus, eromptr);
+		sizel = size & SCAN_SIZE_SZ;
+		if (size & SCAN_SIZE_SG32)
+			sizeh = bcma_erom_get_ent(bus, eromptr);
+	} else
+		sizel = SCAN_ADDR_SZ_BASE <<
+				((ent & SCAN_ADDR_SZ) >> SCAN_ADDR_SZ_SHIFT);
+
+	return addrl;
+}
+
+int bcma_bus_scan(struct bcma_bus *bus)
+{
+	u32 erombase;
+	u32 __iomem *eromptr, *eromend;
+
+	s32 cia, cib;
+	u8 ports[2], wrappers[2];
+
+	s32 tmp;
+	u8 i, j;
+
+	int err;
+
+	INIT_LIST_HEAD(&bus->cores);
+	bus->nr_cores = 0;
+
+	bcma_scan_switch_core(bus, BCMA_ADDR_BASE);
+
+	tmp = bcma_scan_read32(bus, 0, BCMA_CC_ID);
+	bus->chipinfo.id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT;
+	bus->chipinfo.rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT;
+	bus->chipinfo.pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT;
+
+	erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM);
+	eromptr = bus->mmio;
+	eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32);
+
+	bcma_scan_switch_core(bus, erombase);
+
+	while (eromptr < eromend) {
+		struct bcma_device *core = kzalloc(sizeof(*core), GFP_KERNEL);
+		if (!core)
+			return -ENOMEM;
+		INIT_LIST_HEAD(&core->list);
+		core->bus = bus;
+
+		/* get CIs */
+		cia = bcma_erom_get_ci(bus, &eromptr);
+		if (cia < 0) {
+			bcma_erom_push_ent(&eromptr);
+			if (bcma_erom_is_end(bus, &eromptr))
+				break;
+			err= -EILSEQ;
+			goto out;
+		}
+		cib = bcma_erom_get_ci(bus, &eromptr);
+		if (cib < 0) {
+			err= -EILSEQ;
+			goto out;
+		}
+
+		/* parse CIs */
+		core->id.class = (cia & SCAN_CIA_CLASS) >> SCAN_CIA_CLASS_SHIFT;
+		core->id.id = (cia & SCAN_CIA_ID) >> SCAN_CIA_ID_SHIFT;
+		core->id.manuf = (cia & SCAN_CIA_MANUF) >> SCAN_CIA_MANUF_SHIFT;
+		ports[0] = (cib & SCAN_CIB_NMP) >> SCAN_CIB_NMP_SHIFT;
+		ports[1] = (cib & SCAN_CIB_NSP) >> SCAN_CIB_NSP_SHIFT;
+		wrappers[0] = (cib & SCAN_CIB_NMW) >> SCAN_CIB_NMW_SHIFT;
+		wrappers[1] = (cib & SCAN_CIB_NSW) >> SCAN_CIB_NSW_SHIFT;
+		core->id.rev = (cib & SCAN_CIB_REV) >> SCAN_CIB_REV_SHIFT;
+
+		if (((core->id.manuf == BCMA_MANUF_ARM) &&
+		     (core->id.id == 0xFFF)) ||
+		    (ports[1] == 0)) {
+			bcma_erom_skip_component(bus, &eromptr);
+			continue;
+		}
+
+		/* check if component is a core at all */
+		if (wrappers[0] + wrappers[1] == 0) {
+			/* we could save addrl of the router
+			if (cid == BCMA_CORE_OOB_ROUTER)
+			 */
+			bcma_erom_skip_component(bus, &eromptr);
+			continue;
+		}
+
+		if (bcma_erom_is_bridge(bus, &eromptr)) {
+			bcma_erom_skip_component(bus, &eromptr);
+			continue;
+		}
+
+		/* get & parse master ports */
+		for (i = 0; i < ports[0]; i++) {
+			u32 mst_port_d = bcma_erom_get_mst_port(bus, &eromptr);
+			if (mst_port_d < 0) {
+				err= -EILSEQ;
+				goto out;
+			}
+		}
+
+		/* get & parse slave ports */
+		for (i = 0; i < ports[1]; i++) {
+			for (j = 0; ; j++) {
+				tmp = bcma_erom_get_addr_desc(bus, &eromptr,
+					SCAN_ADDR_TYPE_SLAVE, i);
+				if (tmp < 0) {
+					/* no more entries for port _i_ */
+					/* pr_debug("erom: slave port %d "
+					 * "has %d descriptors\n", i, j); */
+					break;
+				} else {
+					if (i == 0 && j == 0)
+						core->addr = tmp;
+				}
+			}
+		}
+
+		/* get & parse master wrappers */
+		for (i = 0; i < wrappers[0]; i++) {
+			for (j = 0; ; j++) {
+				tmp = bcma_erom_get_addr_desc(bus, &eromptr,
+					SCAN_ADDR_TYPE_MWRAP, i);
+				if (tmp < 0) {
+					/* no more entries for port _i_ */
+					/* pr_debug("erom: master wrapper %d "
+					 * "has %d descriptors\n", i, j); */
+					break;
+				} else {
+					if (i == 0 && j == 0)
+						core->wrap = tmp;
+				}
+			}
+		}
+
+		/* get & parse slave wrappers */
+		for (i = 0; i < wrappers[1]; i++) {
+			u8 hack = (ports[1] == 1) ? 0 : 1;
+			for (j = 0; ; j++) {
+				tmp = bcma_erom_get_addr_desc(bus, &eromptr,
+					SCAN_ADDR_TYPE_SWRAP, i + hack);
+				if (tmp < 0) {
+					/* no more entries for port _i_ */
+					/* pr_debug("erom: master wrapper %d "
+					 * has %d descriptors\n", i, j); */
+					break;
+				} else {
+					if (wrappers[0] == 0 && !i && !j)
+						core->wrap = tmp;
+				}
+			}
+		}
+
+		pr_info("Core %d found: %s "
+			"(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n",
+			bus->nr_cores, bcma_device_name(&core->id),
+			core->id.manuf, core->id.id, core->id.rev,
+			core->id.class);
+
+		core->core_index = bus->nr_cores++;
+		list_add(&core->list, &bus->cores);
+		continue;
+out:
+		return err;
+	}
+
+	return 0;
+}
diff --git a/drivers/bcma/scan.h b/drivers/bcma/scan.h
new file mode 100644
index 0000000..113e6a6
--- /dev/null
+++ b/drivers/bcma/scan.h
@@ -0,0 +1,56 @@ 
+#ifndef BCMA_SCAN_H_
+#define BCMA_SCAN_H_
+
+#define BCMA_ADDR_BASE		0x18000000
+#define BCMA_WRAP_BASE		0x18100000
+
+#define SCAN_ER_VALID		0x00000001
+#define SCAN_ER_TAGX		0x00000006 /* we have to ignore 0x8 bit when checking tag for SCAN_ER_TAG_ADDR */
+#define SCAN_ER_TAG		0x0000000E
+#define  SCAN_ER_TAG_CI		0x00000000
+#define  SCAN_ER_TAG_MP		0x00000002
+#define  SCAN_ER_TAG_ADDR	0x00000004
+#define  SCAN_ER_TAG_END	0x0000000E
+#define SCAN_ER_BAD		0xFFFFFFFF
+
+#define SCAN_CIA_CLASS		0x000000F0
+#define SCAN_CIA_CLASS_SHIFT	4
+#define SCAN_CIA_ID		0x000FFF00
+#define SCAN_CIA_ID_SHIFT	8
+#define SCAN_CIA_MANUF		0xFFF00000
+#define SCAN_CIA_MANUF_SHIFT	20
+
+#define SCAN_CIB_NMP		0x000001F0
+#define SCAN_CIB_NMP_SHIFT	4
+#define SCAN_CIB_NSP		0x00003E00
+#define SCAN_CIB_NSP_SHIFT	9
+#define SCAN_CIB_NMW		0x0007C000
+#define SCAN_CIB_NMW_SHIFT	14
+#define SCAN_CIB_NSW		0x00F80000
+#define SCAN_CIB_NSW_SHIFT	17
+#define SCAN_CIB_REV		0xFF000000
+#define SCAN_CIB_REV_SHIFT	24
+
+#define SCAN_ADDR_AG32		0x00000008
+#define SCAN_ADDR_SZ		0x00000030
+#define SCAN_ADDR_SZ_SHIFT	4
+#define  SCAN_ADDR_SZ_4K	0x00000000
+#define  SCAN_ADDR_SZ_8K	0x00000010
+#define  SCAN_ADDR_SZ_16K	0x00000020
+#define  SCAN_ADDR_SZ_SZD	0x00000030
+#define SCAN_ADDR_TYPE		0x000000C0
+#define  SCAN_ADDR_TYPE_SLAVE	0x00000000
+#define  SCAN_ADDR_TYPE_BRIDGE	0x00000040
+#define  SCAN_ADDR_TYPE_SWRAP	0x00000080
+#define  SCAN_ADDR_TYPE_MWRAP	0x000000C0
+#define SCAN_ADDR_PORT		0x00000F00
+#define SCAN_ADDR_PORT_SHIFT	8
+#define SCAN_ADDR_ADDR		0xFFFFF000
+
+#define SCAN_ADDR_SZ_BASE	0x00001000	/* 4KB */
+
+#define SCAN_SIZE_SZ_ALIGN	0x00000FFF
+#define SCAN_SIZE_SZ		0xFFFFF000
+#define SCAN_SIZE_SG32		0x00000008
+
+#endif /* BCMA_SCAN_H_ */
diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h
new file mode 100644
index 0000000..08763e4
--- /dev/null
+++ b/include/linux/bcma/bcma.h
@@ -0,0 +1,224 @@ 
+#ifndef LINUX_BCMA_H_
+#define LINUX_BCMA_H_
+
+#include <linux/pci.h>
+#include <linux/mod_devicetable.h>
+
+#include <linux/bcma/bcma_driver_chipcommon.h>
+#include <linux/bcma/bcma_driver_pci.h>
+
+#include "bcma_regs.h"
+
+struct bcma_device;
+struct bcma_bus;
+
+enum bcma_hosttype {
+	BCMA_HOSTTYPE_NONE,
+	BCMA_HOSTTYPE_PCI,
+	BCMA_HOSTTYPE_SDIO,
+};
+
+struct bcma_chipinfo {
+	u16 id;
+	u8 rev;
+	u8 pkg;
+};
+
+struct bcma_host_ops {
+	u8 (*read8)(struct bcma_device *core, u16 offset);
+	u16 (*read16)(struct bcma_device *core, u16 offset);
+	u32 (*read32)(struct bcma_device *core, u16 offset);
+	void (*write8)(struct bcma_device *core, u16 offset, u8 value);
+	void (*write16)(struct bcma_device *core, u16 offset, u16 value);
+	void (*write32)(struct bcma_device *core, u16 offset, u32 value);
+	/* Agent ops */
+	u32 (*aread32)(struct bcma_device *core, u16 offset);
+	void (*awrite32)(struct bcma_device *core, u16 offset, u32 value);
+};
+
+/* Core manufacturers */
+#define BCMA_MANUF_ARM			0x43B
+#define BCMA_MANUF_MIPS			0x4A7
+#define BCMA_MANUF_BCM			0x4BF
+
+/* Core class values. */
+#define BCMA_CL_SIM			0x0
+#define BCMA_CL_EROM			0x1
+#define BCMA_CL_CORESIGHT		0x9
+#define BCMA_CL_VERIF			0xB
+#define BCMA_CL_OPTIMO			0xD
+#define BCMA_CL_GEN			0xE
+#define BCMA_CL_PRIMECELL		0xF
+
+/* Core-ID values. */
+#define BCMA_CORE_OOB_ROUTER		0x367	/* Out of band */
+#define BCMA_CORE_INVALID		0x700
+#define BCMA_CORE_CHIPCOMMON		0x800
+#define BCMA_CORE_ILINE20		0x801
+#define BCMA_CORE_SRAM			0x802
+#define BCMA_CORE_SDRAM			0x803
+#define BCMA_CORE_PCI			0x804
+#define BCMA_CORE_MIPS			0x805
+#define BCMA_CORE_ETHERNET		0x806
+#define BCMA_CORE_V90			0x807
+#define BCMA_CORE_USB11_HOSTDEV		0x808
+#define BCMA_CORE_ADSL			0x809
+#define BCMA_CORE_ILINE100		0x80A
+#define BCMA_CORE_IPSEC			0x80B
+#define BCMA_CORE_UTOPIA		0x80C
+#define BCMA_CORE_PCMCIA		0x80D
+#define BCMA_CORE_INTERNAL_MEM		0x80E
+#define BCMA_CORE_MEMC_SDRAM		0x80F
+#define BCMA_CORE_OFDM			0x810
+#define BCMA_CORE_EXTIF			0x811
+#define BCMA_CORE_80211			0x812
+#define BCMA_CORE_PHY_A			0x813
+#define BCMA_CORE_PHY_B			0x814
+#define BCMA_CORE_PHY_G			0x815
+#define BCMA_CORE_MIPS_3302		0x816
+#define BCMA_CORE_USB11_HOST		0x817
+#define BCMA_CORE_USB11_DEV		0x818
+#define BCMA_CORE_USB20_HOST		0x819
+#define BCMA_CORE_USB20_DEV		0x81A
+#define BCMA_CORE_SDIO_HOST		0x81B
+#define BCMA_CORE_ROBOSWITCH		0x81C
+#define BCMA_CORE_PARA_ATA		0x81D
+#define BCMA_CORE_SATA_XORDMA		0x81E
+#define BCMA_CORE_ETHERNET_GBIT		0x81F
+#define BCMA_CORE_PCIE			0x820
+#define BCMA_CORE_PHY_N			0x821
+#define BCMA_CORE_SRAM_CTL		0x822
+#define BCMA_CORE_MINI_MACPHY		0x823
+#define BCMA_CORE_ARM_1176		0x824
+#define BCMA_CORE_ARM_7TDMI		0x825
+#define BCMA_CORE_PHY_LP		0x826
+#define BCMA_CORE_PMU			0x827
+#define BCMA_CORE_PHY_SSN		0x828
+#define BCMA_CORE_SDIO_DEV		0x829
+#define BCMA_CORE_ARM_CM3		0x82A
+#define BCMA_CORE_PHY_HT		0x82B
+#define BCMA_CORE_MIPS_74K		0x82C
+#define BCMA_CORE_MAC_GBIT		0x82D
+#define BCMA_CORE_DDR12_MEM_CTL		0x82E
+#define BCMA_CORE_PCIE_RC		0x82F	/* PCIe Root Complex */
+#define BCMA_CORE_OCP_OCP_BRIDGE	0x830
+#define BCMA_CORE_SHARED_COMMON		0x831
+#define BCMA_CORE_OCP_AHB_BRIDGE	0x832
+#define BCMA_CORE_SPI_HOST		0x833
+#define BCMA_CORE_I2S			0x834
+#define BCMA_CORE_SDR_DDR1_MEM_CTL	0x835	/* SDR/DDR1 memory controller core */
+#define BCMA_CORE_SHIM			0x837	/* SHIM component in ubus/6362 */
+#define BCMA_CORE_DEFAULT		0xFFF
+
+#define BCMA_MAX_NR_CORES		16
+
+struct bcma_device {
+	struct bcma_bus *bus;
+	struct bcma_device_id id;
+
+	struct device dev;
+	bool dev_registered;
+
+	u8 core_index;
+
+	u32 addr;
+	u32 wrap;
+
+	void *drvdata;
+	struct list_head list;
+};
+
+static inline void *bcma_get_drvdata(struct bcma_device *core)
+{
+	return core->drvdata;
+}
+static inline void bcma_set_drvdata(struct bcma_device *core, void *drvdata)
+{
+	core->drvdata = drvdata;
+}
+
+struct bcma_driver {
+	const char *name;
+	const struct bcma_device_id *id_table;
+
+	int (*probe)(struct bcma_device *dev);
+	void (*remove)(struct bcma_device *dev);
+	int (*suspend)(struct bcma_device *dev, pm_message_t state);
+	int (*resume)(struct bcma_device *dev);
+	void (*shutdown)(struct bcma_device *dev);
+
+	struct device_driver drv;
+};
+extern
+int __bcma_driver_register(struct bcma_driver *drv, struct module *owner);
+static inline int bcma_driver_register(struct bcma_driver *drv)
+{
+	return __bcma_driver_register(drv, THIS_MODULE);
+}
+extern void bcma_driver_unregister(struct bcma_driver *drv);
+
+struct bcma_bus {
+	/* The MMIO area. */
+	void __iomem *mmio;
+
+	const struct bcma_host_ops *ops;
+
+	enum bcma_hosttype hosttype;
+	union {
+		/* Pointer to the PCI bus (only for BCMA_HOSTTYPE_PCI) */
+		struct pci_dev *host_pci;
+		/* Pointer to the SDIO device (only for BCMA_HOSTTYPE_SDIO) */
+		struct sdio_func *host_sdio;
+	};
+
+	struct bcma_chipinfo chipinfo;
+
+	struct bcma_device *mapped_core;
+	struct list_head cores;
+	u8 nr_cores;
+
+	struct bcma_drv_cc drv_cc;
+	struct bcma_drv_pci drv_pci;
+};
+
+extern inline u32 bcma_read8(struct bcma_device *core, u16 offset)
+{
+	return core->bus->ops->read8(core, offset);
+}
+extern inline u32 bcma_read16(struct bcma_device *core, u16 offset)
+{
+	return core->bus->ops->read16(core, offset);
+}
+extern inline u32 bcma_read32(struct bcma_device *core, u16 offset)
+{
+	return core->bus->ops->read32(core, offset);
+}
+extern inline
+void bcma_write8(struct bcma_device *core, u16 offset, u32 value)
+{
+	core->bus->ops->write8(core, offset, value);
+}
+extern inline
+void bcma_write16(struct bcma_device *core, u16 offset, u32 value)
+{
+	core->bus->ops->write16(core, offset, value);
+}
+extern inline
+void bcma_write32(struct bcma_device *core, u16 offset, u32 value)
+{
+	core->bus->ops->write32(core, offset, value);
+}
+extern inline u32 bcma_aread32(struct bcma_device *core, u16 offset)
+{
+	return core->bus->ops->aread32(core, offset);
+}
+extern inline
+void bcma_awrite32(struct bcma_device *core, u16 offset, u32 value)
+{
+	core->bus->ops->awrite32(core, offset, value);
+}
+
+extern bool bcma_core_is_enabled(struct bcma_device *core);
+extern int bcma_core_enable(struct bcma_device *core, u32 flags);
+
+#endif /* LINUX_BCMA_H_ */
diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h
new file mode 100644
index 0000000..4f8fd6a
--- /dev/null
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
@@ -0,0 +1,297 @@ 
+#ifndef LINUX_BCMA_DRIVER_CC_H_
+#define LINUX_BCMA_DRIVER_CC_H_
+
+/** ChipCommon core registers. **/
+#define BCMA_CC_ID			0x0000
+#define  BCMA_CC_ID_ID			0x0000FFFF
+#define  BCMA_CC_ID_ID_SHIFT		0
+#define  BCMA_CC_ID_REV			0x000F0000
+#define  BCMA_CC_ID_REV_SHIFT		16
+#define  BCMA_CC_ID_PKG			0x00F00000
+#define  BCMA_CC_ID_PKG_SHIFT		20
+#define  BCMA_CC_ID_NRCORES		0x0F000000
+#define  BCMA_CC_ID_NRCORES_SHIFT	24
+#define  BCMA_CC_ID_TYPE		0xF0000000
+#define  BCMA_CC_ID_TYPE_SHIFT		28
+#define BCMA_CC_CAP			0x0004		/* Capabilities */
+#define  BCMA_CC_CAP_NRUART		0x00000003	/* # of UARTs */
+#define  BCMA_CC_CAP_MIPSEB		0x00000004	/* MIPS in BigEndian Mode */
+#define  BCMA_CC_CAP_UARTCLK		0x00000018	/* UART clock select */
+#define   BCMA_CC_CAP_UARTCLK_INT	0x00000008	/* UARTs are driven by internal divided clock */
+#define  BCMA_CC_CAP_UARTGPIO		0x00000020	/* UARTs on GPIO 15-12 */
+#define  BCMA_CC_CAP_EXTBUS		0x000000C0	/* External buses present */
+#define  BCMA_CC_CAP_FLASHT		0x00000700	/* Flash Type */
+#define   BCMA_CC_FLASHT_NONE		0x00000000	/* No flash */
+#define   BCMA_CC_FLASHT_STSER		0x00000100	/* ST serial flash */
+#define   BCMA_CC_FLASHT_ATSER		0x00000200	/* Atmel serial flash */
+#define	  BCMA_CC_FLASHT_PARA		0x00000700	/* Parallel flash */
+#define  BCMA_CC_CAP_PLLT		0x00038000	/* PLL Type */
+#define   BCMA_PLLTYPE_NONE		0x00000000
+#define   BCMA_PLLTYPE_1		0x00010000	/* 48Mhz base, 3 dividers */
+#define   BCMA_PLLTYPE_2		0x00020000	/* 48Mhz, 4 dividers */
+#define   BCMA_PLLTYPE_3		0x00030000	/* 25Mhz, 2 dividers */
+#define   BCMA_PLLTYPE_4		0x00008000	/* 48Mhz, 4 dividers */
+#define   BCMA_PLLTYPE_5		0x00018000	/* 25Mhz, 4 dividers */
+#define   BCMA_PLLTYPE_6		0x00028000	/* 100/200 or 120/240 only */
+#define   BCMA_PLLTYPE_7		0x00038000	/* 25Mhz, 4 dividers */
+#define  BCMA_CC_CAP_PCTL		0x00040000	/* Power Control */
+#define  BCMA_CC_CAP_OTPS		0x00380000	/* OTP size */
+#define  BCMA_CC_CAP_OTPS_SHIFT		19
+#define  BCMA_CC_CAP_OTPS_BASE		5
+#define  BCMA_CC_CAP_JTAGM		0x00400000	/* JTAG master present */
+#define  BCMA_CC_CAP_BROM		0x00800000	/* Internal boot ROM active */
+#define  BCMA_CC_CAP_64BIT		0x08000000	/* 64-bit Backplane */
+#define  BCMA_CC_CAP_PMU		0x10000000	/* PMU available (rev >= 20) */
+#define  BCMA_CC_CAP_ECI		0x20000000	/* ECI available (rev >= 20) */
+#define  BCMA_CC_CAP_SPROM		0x40000000	/* SPROM present */
+#define BCMA_CC_CORECTL			0x0008
+#define  BCMA_CC_CORECTL_UARTCLK0	0x00000001	/* Drive UART with internal clock */
+#define	 BCMA_CC_CORECTL_SE		0x00000002	/* sync clk out enable (corerev >= 3) */
+#define  BCMA_CC_CORECTL_UARTCLKEN	0x00000008	/* UART clock enable (rev >= 21) */
+#define BCMA_CC_BIST			0x000C
+#define BCMA_CC_OTPS			0x0010		/* OTP status */
+#define	 BCMA_CC_OTPS_PROGFAIL		0x80000000
+#define	 BCMA_CC_OTPS_PROTECT		0x00000007
+#define	 BCMA_CC_OTPS_HW_PROTECT	0x00000001
+#define	 BCMA_CC_OTPS_SW_PROTECT	0x00000002
+#define	 BCMA_CC_OTPS_CID_PROTECT	0x00000004
+#define BCMA_CC_OTPC			0x0014		/* OTP control */
+#define	 BCMA_CC_OTPC_RECWAIT		0xFF000000
+#define	 BCMA_CC_OTPC_PROGWAIT		0x00FFFF00
+#define	 BCMA_CC_OTPC_PRW_SHIFT		8
+#define	 BCMA_CC_OTPC_MAXFAIL		0x00000038
+#define	 BCMA_CC_OTPC_VSEL		0x00000006
+#define	 BCMA_CC_OTPC_SELVL		0x00000001
+#define BCMA_CC_OTPP			0x0018		/* OTP prog */
+#define	 BCMA_CC_OTPP_COL		0x000000FF
+#define	 BCMA_CC_OTPP_ROW		0x0000FF00
+#define	 BCMA_CC_OTPP_ROW_SHIFT		8
+#define	 BCMA_CC_OTPP_READERR		0x10000000
+#define	 BCMA_CC_OTPP_VALUE		0x20000000
+#define	 BCMA_CC_OTPP_READ		0x40000000
+#define	 BCMA_CC_OTPP_START		0x80000000
+#define	 BCMA_CC_OTPP_BUSY		0x80000000
+#define BCMA_CC_IRQSTAT			0x0020
+#define BCMA_CC_IRQMASK			0x0024
+#define	 BCMA_CC_IRQ_GPIO		0x00000001	/* gpio intr */
+#define	 BCMA_CC_IRQ_EXT		0x00000002	/* ro: ext intr pin (corerev >= 3) */
+#define	 BCMA_CC_IRQ_WDRESET		0x80000000	/* watchdog reset occurred */
+#define BCMA_CC_CHIPCTL			0x0028		/* Rev >= 11 only */
+#define BCMA_CC_CHIPSTAT		0x002C		/* Rev >= 11 only */
+#define BCMA_CC_JCMD			0x0030		/* Rev >= 10 only */
+#define  BCMA_CC_JCMD_START		0x80000000
+#define  BCMA_CC_JCMD_BUSY		0x80000000
+#define  BCMA_CC_JCMD_PAUSE		0x40000000
+#define  BCMA_CC_JCMD0_ACC_MASK		0x0000F000
+#define  BCMA_CC_JCMD0_ACC_IRDR		0x00000000
+#define  BCMA_CC_JCMD0_ACC_DR		0x00001000
+#define  BCMA_CC_JCMD0_ACC_IR		0x00002000
+#define  BCMA_CC_JCMD0_ACC_RESET	0x00003000
+#define  BCMA_CC_JCMD0_ACC_IRPDR	0x00004000
+#define  BCMA_CC_JCMD0_ACC_PDR		0x00005000
+#define  BCMA_CC_JCMD0_IRW_MASK		0x00000F00
+#define  BCMA_CC_JCMD_ACC_MASK		0x000F0000	/* Changes for corerev 11 */
+#define  BCMA_CC_JCMD_ACC_IRDR		0x00000000
+#define  BCMA_CC_JCMD_ACC_DR		0x00010000
+#define  BCMA_CC_JCMD_ACC_IR		0x00020000
+#define  BCMA_CC_JCMD_ACC_RESET		0x00030000
+#define  BCMA_CC_JCMD_ACC_IRPDR		0x00040000
+#define  BCMA_CC_JCMD_ACC_PDR		0x00050000
+#define  BCMA_CC_JCMD_IRW_MASK		0x00001F00
+#define  BCMA_CC_JCMD_IRW_SHIFT		8
+#define  BCMA_CC_JCMD_DRW_MASK		0x0000003F
+#define BCMA_CC_JIR			0x0034		/* Rev >= 10 only */
+#define BCMA_CC_JDR			0x0038		/* Rev >= 10 only */
+#define BCMA_CC_JCTL			0x003C		/* Rev >= 10 only */
+#define  BCMA_CC_JCTL_FORCE_CLK		4		/* Force clock */
+#define  BCMA_CC_JCTL_EXT_EN		2		/* Enable external targets */
+#define  BCMA_CC_JCTL_EN		1		/* Enable Jtag master */
+#define BCMA_CC_FLASHCTL		0x0040
+#define  BCMA_CC_FLASHCTL_START		0x80000000
+#define  BCMA_CC_FLASHCTL_BUSY		BCMA_CC_FLASHCTL_START
+#define BCMA_CC_FLASHADDR		0x0044
+#define BCMA_CC_FLASHDATA		0x0048
+#define BCMA_CC_BCAST_ADDR		0x0050
+#define BCMA_CC_BCAST_DATA		0x0054
+#define BCMA_CC_GPIOIN			0x0060
+#define BCMA_CC_GPIOOUT			0x0064
+#define BCMA_CC_GPIOOUTEN		0x0068
+#define BCMA_CC_GPIOCTL			0x006C
+#define BCMA_CC_GPIOPOL			0x0070
+#define BCMA_CC_GPIOIRQ			0x0074
+#define BCMA_CC_WATCHDOG		0x0080
+#define BCMA_CC_GPIOTIMER		0x0088		/* LED powersave (corerev >= 16) */
+#define  BCMA_CC_GPIOTIMER_ONTIME_SHIFT	16
+#define BCMA_CC_GPIOTOUTM		0x008C		/* LED powersave (corerev >= 16) */
+#define BCMA_CC_CLOCK_N			0x0090
+#define BCMA_CC_CLOCK_SB		0x0094
+#define BCMA_CC_CLOCK_PCI		0x0098
+#define BCMA_CC_CLOCK_M2		0x009C
+#define BCMA_CC_CLOCK_MIPS		0x00A0
+#define BCMA_CC_CLKDIV			0x00A4		/* Rev >= 3 only */
+#define	 BCMA_CC_CLKDIV_SFLASH		0x0F000000
+#define	 BCMA_CC_CLKDIV_SFLASH_SHIFT	24
+#define	 BCMA_CC_CLKDIV_OTP		0x000F0000
+#define	 BCMA_CC_CLKDIV_OTP_SHIFT	16
+#define	 BCMA_CC_CLKDIV_JTAG		0x00000F00
+#define	 BCMA_CC_CLKDIV_JTAG_SHIFT	8
+#define	 BCMA_CC_CLKDIV_UART		0x000000FF
+#define BCMA_CC_CAP_EXT			0x00AC		/* Capabilities */
+#define BCMA_CC_PLLONDELAY		0x00B0		/* Rev >= 4 only */
+#define BCMA_CC_FREFSELDELAY		0x00B4		/* Rev >= 4 only */
+#define BCMA_CC_SLOWCLKCTL		0x00B8		/* 6 <= Rev <= 9 only */
+#define  BCMA_CC_SLOWCLKCTL_SRC		0x00000007	/* slow clock source mask */
+#define	  BCMA_CC_SLOWCLKCTL_SRC_LPO	0x00000000	/* source of slow clock is LPO */
+#define   BCMA_CC_SLOWCLKCTL_SRC_XTAL	0x00000001	/* source of slow clock is crystal */
+#define	  BCMA_CC_SLOECLKCTL_SRC_PCI	0x00000002	/* source of slow clock is PCI */
+#define  BCMA_CC_SLOWCLKCTL_LPOFREQ	0x00000200	/* LPOFreqSel, 1: 160Khz, 0: 32KHz */
+#define  BCMA_CC_SLOWCLKCTL_LPOPD	0x00000400	/* LPOPowerDown, 1: LPO is disabled, 0: LPO is enabled */
+#define  BCMA_CC_SLOWCLKCTL_FSLOW	0x00000800	/* ForceSlowClk, 1: sb/cores running on slow clock, 0: power logic control */
+#define  BCMA_CC_SLOWCLKCTL_IPLL	0x00001000	/* IgnorePllOffReq, 1/0: power logic ignores/honors PLL clock disable requests from core */
+#define  BCMA_CC_SLOWCLKCTL_ENXTAL	0x00002000	/* XtalControlEn, 1/0: power logic does/doesn't disable crystal when appropriate */
+#define  BCMA_CC_SLOWCLKCTL_XTALPU	0x00004000	/* XtalPU (RO), 1/0: crystal running/disabled */
+#define  BCMA_CC_SLOWCLKCTL_CLKDIV	0xFFFF0000	/* ClockDivider (SlowClk = 1/(4+divisor)) */
+#define  BCMA_CC_SLOWCLKCTL_CLKDIV_SHIFT	16
+#define BCMA_CC_SYSCLKCTL		0x00C0		/* Rev >= 3 only */
+#define	 BCMA_CC_SYSCLKCTL_IDLPEN	0x00000001	/* ILPen: Enable Idle Low Power */
+#define	 BCMA_CC_SYSCLKCTL_ALPEN	0x00000002	/* ALPen: Enable Active Low Power */
+#define	 BCMA_CC_SYSCLKCTL_PLLEN	0x00000004	/* ForcePLLOn */
+#define	 BCMA_CC_SYSCLKCTL_FORCEALP	0x00000008	/* Force ALP (or HT if ALPen is not set */
+#define	 BCMA_CC_SYSCLKCTL_FORCEHT	0x00000010	/* Force HT */
+#define  BCMA_CC_SYSCLKCTL_CLKDIV	0xFFFF0000	/* ClkDiv  (ILP = 1/(4+divisor)) */
+#define  BCMA_CC_SYSCLKCTL_CLKDIV_SHIFT	16
+#define BCMA_CC_CLKSTSTR		0x00C4		/* Rev >= 3 only */
+#define BCMA_CC_EROM			0x00FC
+#define BCMA_CC_PCMCIA_CFG		0x0100
+#define BCMA_CC_PCMCIA_MEMWAIT		0x0104
+#define BCMA_CC_PCMCIA_ATTRWAIT		0x0108
+#define BCMA_CC_PCMCIA_IOWAIT		0x010C
+#define BCMA_CC_IDE_CFG			0x0110
+#define BCMA_CC_IDE_MEMWAIT		0x0114
+#define BCMA_CC_IDE_ATTRWAIT		0x0118
+#define BCMA_CC_IDE_IOWAIT		0x011C
+#define BCMA_CC_PROG_CFG		0x0120
+#define BCMA_CC_PROG_WAITCNT		0x0124
+#define BCMA_CC_FLASH_CFG		0x0128
+#define BCMA_CC_FLASH_WAITCNT		0x012C
+#define BCMA_CC_CLKCTLST		0x01E0 /* Clock control and status (rev >= 20) */
+#define  BCMA_CC_CLKCTLST_FORCEALP	0x00000001 /* Force ALP request */
+#define  BCMA_CC_CLKCTLST_FORCEHT	0x00000002 /* Force HT request */
+#define  BCMA_CC_CLKCTLST_FORCEILP	0x00000004 /* Force ILP request */
+#define  BCMA_CC_CLKCTLST_HAVEALPREQ	0x00000008 /* ALP available request */
+#define  BCMA_CC_CLKCTLST_HAVEHTREQ	0x00000010 /* HT available request */
+#define  BCMA_CC_CLKCTLST_HWCROFF	0x00000020 /* Force HW clock request off */
+#define  BCMA_CC_CLKCTLST_HAVEHT	0x00010000 /* HT available */
+#define  BCMA_CC_CLKCTLST_HAVEALP	0x00020000 /* APL available */
+#define BCMA_CC_HW_WORKAROUND		0x01E4 /* Hardware workaround (rev >= 20) */
+#define BCMA_CC_UART0_DATA		0x0300
+#define BCMA_CC_UART0_IMR		0x0304
+#define BCMA_CC_UART0_FCR		0x0308
+#define BCMA_CC_UART0_LCR		0x030C
+#define BCMA_CC_UART0_MCR		0x0310
+#define BCMA_CC_UART0_LSR		0x0314
+#define BCMA_CC_UART0_MSR		0x0318
+#define BCMA_CC_UART0_SCRATCH		0x031C
+#define BCMA_CC_UART1_DATA		0x0400
+#define BCMA_CC_UART1_IMR		0x0404
+#define BCMA_CC_UART1_FCR		0x0408
+#define BCMA_CC_UART1_LCR		0x040C
+#define BCMA_CC_UART1_MCR		0x0410
+#define BCMA_CC_UART1_LSR		0x0414
+#define BCMA_CC_UART1_MSR		0x0418
+#define BCMA_CC_UART1_SCRATCH		0x041C
+/* PMU registers (rev >= 20) */
+#define BCMA_CC_PMU_CTL			0x0600 /* PMU control */
+#define  BCMA_CC_PMU_CTL_ILP_DIV	0xFFFF0000 /* ILP div mask */
+#define  BCMA_CC_PMU_CTL_ILP_DIV_SHIFT	16
+#define  BCMA_CC_PMU_CTL_NOILPONW	0x00000200 /* No ILP on wait */
+#define  BCMA_CC_PMU_CTL_HTREQEN	0x00000100 /* HT req enable */
+#define  BCMA_CC_PMU_CTL_ALPREQEN	0x00000080 /* ALP req enable */
+#define  BCMA_CC_PMU_CTL_XTALFREQ	0x0000007C /* Crystal freq */
+#define  BCMA_CC_PMU_CTL_XTALFREQ_SHIFT	2
+#define  BCMA_CC_PMU_CTL_ILPDIVEN	0x00000002 /* ILP div enable */
+#define  BCMA_CC_PMU_CTL_LPOSEL		0x00000001 /* LPO sel */
+#define BCMA_CC_PMU_CAP			0x0604 /* PMU capabilities */
+#define  BCMA_CC_PMU_CAP_REVISION	0x000000FF /* Revision mask */
+#define BCMA_CC_PMU_STAT		0x0608 /* PMU status */
+#define  BCMA_CC_PMU_STAT_INTPEND	0x00000040 /* Interrupt pending */
+#define  BCMA_CC_PMU_STAT_SBCLKST	0x00000030 /* Backplane clock status? */
+#define  BCMA_CC_PMU_STAT_HAVEALP	0x00000008 /* ALP available */
+#define  BCMA_CC_PMU_STAT_HAVEHT	0x00000004 /* HT available */
+#define  BCMA_CC_PMU_STAT_RESINIT	0x00000003 /* Res init */
+#define BCMA_CC_PMU_RES_STAT		0x060C /* PMU res status */
+#define BCMA_CC_PMU_RES_PEND		0x0610 /* PMU res pending */
+#define BCMA_CC_PMU_TIMER		0x0614 /* PMU timer */
+#define BCMA_CC_PMU_MINRES_MSK		0x0618 /* PMU min res mask */
+#define BCMA_CC_PMU_MAXRES_MSK		0x061C /* PMU max res mask */
+#define BCMA_CC_PMU_RES_TABSEL		0x0620 /* PMU res table sel */
+#define BCMA_CC_PMU_RES_DEPMSK		0x0624 /* PMU res dep mask */
+#define BCMA_CC_PMU_RES_UPDNTM		0x0628 /* PMU res updown timer */
+#define BCMA_CC_PMU_RES_TIMER		0x062C /* PMU res timer */
+#define BCMA_CC_PMU_CLKSTRETCH		0x0630 /* PMU clockstretch */
+#define BCMA_CC_PMU_WATCHDOG		0x0634 /* PMU watchdog */
+#define BCMA_CC_PMU_RES_REQTS		0x0640 /* PMU res req timer sel */
+#define BCMA_CC_PMU_RES_REQT		0x0644 /* PMU res req timer */
+#define BCMA_CC_PMU_RES_REQM		0x0648 /* PMU res req mask */
+#define BCMA_CC_CHIPCTL_ADDR		0x0650
+#define BCMA_CC_CHIPCTL_DATA		0x0654
+#define BCMA_CC_REGCTL_ADDR		0x0658
+#define BCMA_CC_REGCTL_DATA		0x065C
+#define BCMA_CC_PLLCTL_ADDR		0x0660
+#define BCMA_CC_PLLCTL_DATA		0x0664
+
+/* Data for the PMU, if available.
+ * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU)
+ */
+struct bcma_chipcommon_pmu {
+	u8 rev;			/* PMU revision */
+	u32 crystalfreq;	/* The active crystal frequency (in kHz) */
+};
+
+struct bcma_drv_cc {
+	struct bcma_device *core;
+	u32 status;
+	u32 capabilities;
+	u32 capabilities_ext;
+	/* Fast Powerup Delay constant */
+	u16 fast_pwrup_delay;
+	struct bcma_chipcommon_pmu pmu;
+};
+
+/* Register access */
+#define bcma_cc_read32(cc, offset) \
+	bcma_read32((cc)->core, offset)
+#define bcma_cc_write32(cc, offset, val) \
+	bcma_write32((cc)->core, offset, val)
+
+#define bcma_cc_mask32(cc, offset, mask) \
+	bcma_cc_write32(cc, offset, bcma_cc_read32(cc, offset) & (mask))
+#define bcma_cc_set32(cc, offset, set) \
+	bcma_cc_write32(cc, offset, bcma_cc_read32(cc, offset) | (set))
+#define bcma_cc_maskset32(cc, offset, mask, set) \
+	bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set))
+
+extern void bcma_core_chipcommon_init(struct bcma_drv_cc *cc);
+
+extern void bcma_chipco_suspend(struct bcma_drv_cc *cc);
+extern void bcma_chipco_resume(struct bcma_drv_cc *cc);
+
+extern void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc,
+					  u32 ticks);
+
+void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value);
+
+u32 bcma_chipco_irq_status(struct bcma_drv_cc *cc, u32 mask);
+
+/* Chipcommon GPIO pin access. */
+u32 bcma_chipco_gpio_in(struct bcma_drv_cc *cc, u32 mask);
+u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value);
+u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value);
+u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value);
+u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value);
+u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value);
+
+/* PMU support */
+extern void bcma_pmu_init(struct bcma_drv_cc *cc);
+
+#endif /* LINUX_BCMA_DRIVER_CC_H_ */
diff --git a/include/linux/bcma/bcma_driver_pci.h b/include/linux/bcma/bcma_driver_pci.h
new file mode 100644
index 0000000..b7e191c
--- /dev/null
+++ b/include/linux/bcma/bcma_driver_pci.h
@@ -0,0 +1,89 @@ 
+#ifndef LINUX_BCMA_DRIVER_PCI_H_
+#define LINUX_BCMA_DRIVER_PCI_H_
+
+#include <linux/types.h>
+
+struct pci_dev;
+
+/** PCI core registers. **/
+#define BCMA_CORE_PCI_CTL			0x0000	/* PCI Control */
+#define  BCMA_CORE_PCI_CTL_RST_OE		0x00000001 /* PCI_RESET Output Enable */
+#define  BCMA_CORE_PCI_CTL_RST			0x00000002 /* PCI_RESET driven out to pin */
+#define  BCMA_CORE_PCI_CTL_CLK_OE		0x00000004 /* Clock gate Output Enable */
+#define  BCMA_CORE_PCI_CTL_CLK			0x00000008 /* Gate for clock driven out to pin */
+#define BCMA_CORE_PCI_ARBCTL			0x0010	/* PCI Arbiter Control */
+#define  BCMA_CORE_PCI_ARBCTL_INTERN		0x00000001 /* Use internal arbiter */
+#define  BCMA_CORE_PCI_ARBCTL_EXTERN		0x00000002 /* Use external arbiter */
+#define  BCMA_CORE_PCI_ARBCTL_PARKID		0x00000006 /* Mask, selects which agent is parked on an idle bus */
+#define   BCMA_CORE_PCI_ARBCTL_PARKID_LAST	0x00000000 /* Last requestor */
+#define   BCMA_CORE_PCI_ARBCTL_PARKID_4710	0x00000002 /* 4710 */
+#define   BCMA_CORE_PCI_ARBCTL_PARKID_EXT0	0x00000004 /* External requestor 0 */
+#define   BCMA_CORE_PCI_ARBCTL_PARKID_EXT1	0x00000006 /* External requestor 1 */
+#define BCMA_CORE_PCI_ISTAT			0x0020	/* Interrupt status */
+#define  BCMA_CORE_PCI_ISTAT_INTA		0x00000001 /* PCI INTA# */
+#define  BCMA_CORE_PCI_ISTAT_INTB		0x00000002 /* PCI INTB# */
+#define  BCMA_CORE_PCI_ISTAT_SERR		0x00000004 /* PCI SERR# (write to clear) */
+#define  BCMA_CORE_PCI_ISTAT_PERR		0x00000008 /* PCI PERR# (write to clear) */
+#define  BCMA_CORE_PCI_ISTAT_PME		0x00000010 /* PCI PME# */
+#define BCMA_CORE_PCI_IMASK			0x0024	/* Interrupt mask */
+#define  BCMA_CORE_PCI_IMASK_INTA		0x00000001 /* PCI INTA# */
+#define  BCMA_CORE_PCI_IMASK_INTB		0x00000002 /* PCI INTB# */
+#define  BCMA_CORE_PCI_IMASK_SERR		0x00000004 /* PCI SERR# */
+#define  BCMA_CORE_PCI_IMASK_PERR		0x00000008 /* PCI PERR# */
+#define  BCMA_CORE_PCI_IMASK_PME		0x00000010 /* PCI PME# */
+#define BCMA_CORE_PCI_MBOX			0x0028	/* Backplane to PCI Mailbox */
+#define  BCMA_CORE_PCI_MBOX_F0_0		0x00000100 /* PCI function 0, INT 0 */
+#define  BCMA_CORE_PCI_MBOX_F0_1		0x00000200 /* PCI function 0, INT 1 */
+#define  BCMA_CORE_PCI_MBOX_F1_0		0x00000400 /* PCI function 1, INT 0 */
+#define  BCMA_CORE_PCI_MBOX_F1_1		0x00000800 /* PCI function 1, INT 1 */
+#define  BCMA_CORE_PCI_MBOX_F2_0		0x00001000 /* PCI function 2, INT 0 */
+#define  BCMA_CORE_PCI_MBOX_F2_1		0x00002000 /* PCI function 2, INT 1 */
+#define  BCMA_CORE_PCI_MBOX_F3_0		0x00004000 /* PCI function 3, INT 0 */
+#define  BCMA_CORE_PCI_MBOX_F3_1		0x00008000 /* PCI function 3, INT 1 */
+#define BCMA_CORE_PCI_BCAST_ADDR		0x0050	/* Backplane Broadcast Address */
+#define  BCMA_CORE_PCI_BCAST_ADDR_MASK		0x000000FF
+#define BCMA_CORE_PCI_BCAST_DATA		0x0054	/* Backplane Broadcast Data */
+#define BCMA_CORE_PCI_GPIO_IN			0x0060	/* rev >= 2 only */
+#define BCMA_CORE_PCI_GPIO_OUT			0x0064	/* rev >= 2 only */
+#define BCMA_CORE_PCI_GPIO_ENABLE		0x0068	/* rev >= 2 only */
+#define BCMA_CORE_PCI_GPIO_CTL			0x006C	/* rev >= 2 only */
+#define BCMA_CORE_PCI_SBTOPCI0			0x0100	/* Backplane to PCI translation 0 (sbtopci0) */
+#define  BCMA_CORE_PCI_SBTOPCI0_MASK		0xFC000000
+#define BCMA_CORE_PCI_SBTOPCI1			0x0104	/* Backplane to PCI translation 1 (sbtopci1) */
+#define  BCMA_CORE_PCI_SBTOPCI1_MASK		0xFC000000
+#define BCMA_CORE_PCI_SBTOPCI2			0x0108	/* Backplane to PCI translation 2 (sbtopci2) */
+#define  BCMA_CORE_PCI_SBTOPCI2_MASK		0xC0000000
+#define BCMA_CORE_PCI_PCICFG0			0x0400	/* PCI config space 0 (rev >= 8) */
+#define BCMA_CORE_PCI_PCICFG1			0x0500	/* PCI config space 1 (rev >= 8) */
+#define BCMA_CORE_PCI_PCICFG2			0x0600	/* PCI config space 2 (rev >= 8) */
+#define BCMA_CORE_PCI_PCICFG3			0x0700	/* PCI config space 3 (rev >= 8) */
+#define BCMA_CORE_PCI_SPROM(wordoffset)		(0x0800 + ((wordoffset) * 2)) /* SPROM shadow area (72 bytes) */
+
+/* SBtoPCIx */
+#define BCMA_CORE_PCI_SBTOPCI_MEM		0x00000000
+#define BCMA_CORE_PCI_SBTOPCI_IO		0x00000001
+#define BCMA_CORE_PCI_SBTOPCI_CFG0		0x00000002
+#define BCMA_CORE_PCI_SBTOPCI_CFG1		0x00000003
+#define BCMA_CORE_PCI_SBTOPCI_PREF		0x00000004 /* Prefetch enable */
+#define BCMA_CORE_PCI_SBTOPCI_BURST		0x00000008 /* Burst enable */
+#define BCMA_CORE_PCI_SBTOPCI_MRM		0x00000020 /* Memory Read Multiple */
+#define BCMA_CORE_PCI_SBTOPCI_RC		0x00000030 /* Read Command mask (rev >= 11) */
+#define  BCMA_CORE_PCI_SBTOPCI_RC_READ		0x00000000 /* Memory read */
+#define  BCMA_CORE_PCI_SBTOPCI_RC_READL		0x00000010 /* Memory read line */
+#define  BCMA_CORE_PCI_SBTOPCI_RC_READM		0x00000020 /* Memory read multiple */
+
+/* PCIcore specific boardflags */
+#define BCMA_CORE_PCI_BFL_NOPCI			0x00000400 /* Board leaves PCI floating */
+
+struct bcma_drv_pci {
+	struct bcma_device *core;
+	u8 setup_done:1;
+};
+
+/* Register access */
+#define pcicore_read32(pc, offset)		bcma_read32((pc)->core, offset)
+#define pcicore_write32(pc, offset, val)	bcma_write32((pc)->core, offset, val)
+
+extern void bcma_core_pci_init(struct bcma_drv_pci *pc);
+
+#endif /* LINUX_BCMA_DRIVER_PCI_H_ */
diff --git a/include/linux/bcma/bcma_regs.h b/include/linux/bcma/bcma_regs.h
new file mode 100644
index 0000000..f82d88a
--- /dev/null
+++ b/include/linux/bcma/bcma_regs.h
@@ -0,0 +1,34 @@ 
+#ifndef LINUX_BCMA_REGS_H_
+#define LINUX_BCMA_REGS_H_
+
+/* Agent registers (common for every core) */
+#define BCMA_IOCTL			0x0408
+#define  BCMA_IOCTL_CLK			0x0001
+#define  BCMA_IOCTL_FGC			0x0002
+#define  BCMA_IOCTL_CORE_BITS		0x3FFC
+#define  BCMA_IOCTL_PME_EN		0x4000
+#define  BCMA_IOCTL_BIST_EN		0x8000
+#define BCMA_RESET_CTL			0x0800
+#define  BCMA_RESET_CTL_RESET		0x0001
+
+/* BCMA PCI config space registers. */
+#define BCMA_PCI_PMCSR			0x44
+#define  BCMA_PCI_PE			0x100
+#define BCMA_PCI_BAR0_WIN		0x80	/* Backplane address space 0 */
+#define BCMA_PCI_BAR1_WIN		0x84	/* Backplane address space 1 */
+#define BCMA_PCI_SPROMCTL		0x88	/* SPROM control */
+#define  BCMA_PCI_SPROMCTL_WE		0x10	/* SPROM write enable */
+#define BCMA_PCI_BAR1_CONTROL		0x8c	/* Address space 1 burst control */
+#define BCMA_PCI_IRQS			0x90	/* PCI interrupts */
+#define BCMA_PCI_IRQMASK		0x94	/* PCI IRQ control and mask (pcirev >= 6 only) */
+#define BCMA_PCI_BACKPLANE_IRQS		0x98	/* Backplane Interrupts */
+#define BCMA_PCI_BAR0_WIN2		0xAC
+#define BCMA_PCI_GPIO_IN		0xB0	/* GPIO Input (pcirev >= 3 only) */
+#define BCMA_PCI_GPIO_OUT		0xB4	/* GPIO Output (pcirev >= 3 only) */
+#define BCMA_PCI_GPIO_OUT_ENABLE	0xB8	/* GPIO Output Enable/Disable (pcirev >= 3 only) */
+#define  BCMA_PCI_GPIO_SCS		0x10	/* PCI config space bit 4 for 4306c0 slow clock source */
+#define  BCMA_PCI_GPIO_HWRAD		0x20	/* PCI config space GPIO 13 for hw radio disable */
+#define  BCMA_PCI_GPIO_XTAL		0x40	/* PCI config space GPIO 14 for Xtal powerup */
+#define  BCMA_PCI_GPIO_PLL		0x80	/* PCI config space GPIO 15 for PLL powerdown */
+
+#endif /* LINUX_BCMA_REGS_H_ */
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index 48c007d..ae28e93 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -382,6 +382,23 @@  struct ssb_device_id {
 #define SSB_ANY_ID		0xFFFF
 #define SSB_ANY_REV		0xFF
 
+/* Broadcom's specific AMBA core, see drivers/bcma/ */
+struct bcma_device_id {
+	__u16	manuf;
+	__u16	id;
+	__u8	rev;
+	__u8	class;
+};
+#define BCMA_CORE(_manuf, _id, _rev, _class)  \
+	{ .manuf = _manuf, .id = _id, .rev = _rev, .class = _class, }
+#define BCMA_CORETABLE_END  \
+	{ 0, },
+
+#define BCMA_ANY_MANUF		0xFFFF
+#define BCMA_ANY_ID		0xFFFF
+#define BCMA_ANY_REV		0xFF
+#define BCMA_ANY_CLASS		0xFF
+
 struct virtio_device_id {
 	__u32 device;
 	__u32 vendor;
diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c
index 88f3f07..e26e2fb 100644
--- a/scripts/mod/file2alias.c
+++ b/scripts/mod/file2alias.c
@@ -702,6 +702,24 @@  static int do_ssb_entry(const char *filename,
 	return 1;
 }
 
+/* Looks like: bcma:mNidNrevNclN. */
+static int do_bcma_entry(const char *filename,
+			 struct bcma_device_id *id, char *alias)
+{
+	id->manuf = TO_NATIVE(id->manuf);
+	id->id = TO_NATIVE(id->id);
+	id->rev = TO_NATIVE(id->rev);
+	id->class = TO_NATIVE(id->class);
+
+	strcpy(alias, "bcma:");
+	ADD(alias, "m", id->manuf != BCMA_ANY_MANUF, id->manuf);
+	ADD(alias, "id", id->id != BCMA_ANY_ID, id->id);
+	ADD(alias, "rev", id->rev != BCMA_ANY_REV, id->rev);
+	ADD(alias, "cl", id->class != BCMA_ANY_CLASS, id->class);
+	add_wildcard(alias);
+	return 1;
+}
+
 /* Looks like: virtio:dNvN */
 static int do_virtio_entry(const char *filename, struct virtio_device_id *id,
 			   char *alias)
@@ -968,6 +986,10 @@  void handle_moddevtable(struct module *mod, struct elf_info *info,
 		do_table(symval, sym->st_size,
 			 sizeof(struct ssb_device_id), "ssb",
 			 do_ssb_entry, mod);
+	else if (sym_is(symname, "__mod_bcma_device_table"))
+		do_table(symval, sym->st_size,
+			 sizeof(struct bcma_device_id), "bcma",
+			 do_bcma_entry, mod);
 	else if (sym_is(symname, "__mod_virtio_device_table"))
 		do_table(symval, sym->st_size,
 			 sizeof(struct virtio_device_id), "virtio",