[3/3] ARM: config: multi_v5: Enable ASPEED drivers

This enables the devices used in the AST2400 family of BMC SoCs:

 - VUART
 - SPI NOR
 - LPC controller
 - LPC snoop (port 80)
 - Ethernet
 - GPIO
 - ADC
 - I2C
 - Random number generator
 - IPMI KCS
 - IPMI BT
 - Fan/Tach

Signed-off-by: Joel Stanley <joel@jms.id.au>
---
 arch/arm/configs/multi_v5_defconfig | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

On Wed, 18 Jul 2018, at 23:23, Joel Stanley wrote:
> This enables the devices used in the AST2400 family of BMC SoCs:
> 
>  - VUART
>  - SPI NOR
>  - LPC controller
>  - LPC snoop (port 80)
>  - Ethernet
>  - GPIO
>  - ADC
>  - I2C
>  - Random number generator
>  - IPMI KCS
>  - IPMI BT
>  - Fan/Tach
> 
> Signed-off-by: Joel Stanley <joel@jms.id.au>
> ---
>  arch/arm/configs/multi_v5_defconfig | 14 +++++++++++++-
>  1 file changed, 13 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/
> multi_v5_defconfig
> index b647e249908e..318b76fa26d1 100644
> --- a/arch/arm/configs/multi_v5_defconfig
> +++ b/arch/arm/configs/multi_v5_defconfig
> @@ -90,10 +90,14 @@ CONFIG_MTD_PHYSMAP=y
>  CONFIG_MTD_NAND=y
>  CONFIG_MTD_NAND_ATMEL=y
>  CONFIG_MTD_NAND_ORION=y
> +CONFIG_MTD_SPI_NOR=y
> +CONFIG_SPI_ASPEED_SMC=y
>  CONFIG_MTD_UBI=y
>  CONFIG_BLK_DEV_LOOP=y
>  CONFIG_ATMEL_TCLIB=y
>  CONFIG_ATMEL_SSC=m
> +CONFIG_ASPEED_LPC_CTRL=m
> +CONFIG_ASPEED_LPC_SNOOP=m

Any reason that you switch between module and built-in throughout? It's not clear from the commit message.

>  CONFIG_EEPROM_AT24=y
>  # CONFIG_SCSI_PROC_FS is not set
>  CONFIG_BLK_DEV_SD=y
> @@ -107,6 +111,7 @@ CONFIG_NET_DSA_MV88E6060=y
>  CONFIG_NET_DSA_MV88E6XXX=y
>  CONFIG_MACB=y
>  CONFIG_DM9000=y
> +CONFIG_FTGMAC100=m
>  CONFIG_MV643XX_ETH=y
>  CONFIG_R8169=y
>  CONFIG_DAVICOM_PHY=y
> @@ -128,16 +133,20 @@ CONFIG_SERIAL_8250_NR_UARTS=6
>  CONFIG_SERIAL_8250_RUNTIME_UARTS=6
>  CONFIG_SERIAL_8250_EXTENDED=y
>  CONFIG_SERIAL_8250_MANY_PORTS=y
> +CONFIG_SERIAL_8250_ASPEED_VUART=m
>  CONFIG_SERIAL_OF_PLATFORM=y
>  CONFIG_SERIAL_ATMEL=y
>  CONFIG_SERIAL_ATMEL_CONSOLE=y
>  CONFIG_SERIAL_ATMEL_TTYAT=y
>  CONFIG_SERIAL_IMX=y
>  CONFIG_SERIAL_IMX_CONSOLE=y
> +CONFIG_ASPEED_KCS_IPMI_BMC=m
> +CONFIG_ASPEED_BT_IPMI_BMC=m
>  CONFIG_HW_RANDOM=y
> -CONFIG_I2C=y
> +CONFIG_HW_RANDOM_TIMERIOMEM=m
>  # CONFIG_I2C_COMPAT is not set
>  CONFIG_I2C_CHARDEV=y
> +CONFIG_I2C_ASPEED=m
>  CONFIG_I2C_AT91=y
>  CONFIG_I2C_IMX=y
>  CONFIG_I2C_MV64XXX=y
> @@ -146,10 +155,12 @@ CONFIG_SPI=y
>  CONFIG_SPI_ATMEL=y
>  CONFIG_SPI_IMX=y
>  CONFIG_SPI_ORION=y
> +CONFIG_GPIO_ASPEED=m
>  CONFIG_POWER_RESET=y
>  CONFIG_POWER_RESET_GPIO=y
>  CONFIG_POWER_RESET_QNAP=y
>  CONFIG_SENSORS_ADT7475=y
> +CONFIG_SENSORS_ASPEED=y
>  CONFIG_SENSORS_G762=y
>  CONFIG_SENSORS_LM63=y
>  CONFIG_SENSORS_LM75=y
> @@ -240,6 +251,7 @@ CONFIG_MV_XOR=y
>  CONFIG_STAGING=y
>  CONFIG_FB_XGI=y
>  CONFIG_IIO=m
> +CONFIG_ASPEED_ADC=m
>  CONFIG_AT91_ADC=m
>  CONFIG_PWM=y
>  CONFIG_PWM_ATMEL=m
> -- 
> 2.17.1
>

On 24 July 2018 at 14:26, Andrew Jeffery <andrew@aj.id.au> wrote:
>
>
> On Wed, 18 Jul 2018, at 23:23, Joel Stanley wrote:
>> This enables the devices used in the AST2400 family of BMC SoCs:
>>
>>  - VUART
>>  - SPI NOR
>>  - LPC controller
>>  - LPC snoop (port 80)
>>  - Ethernet
>>  - GPIO
>>  - ADC
>>  - I2C
>>  - Random number generator
>>  - IPMI KCS
>>  - IPMI BT
>>  - Fan/Tach
>>
>> Signed-off-by: Joel Stanley <joel@jms.id.au>
>> ---
>>  arch/arm/configs/multi_v5_defconfig | 14 +++++++++++++-
>>  1 file changed, 13 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/
>> multi_v5_defconfig
>> index b647e249908e..318b76fa26d1 100644
>> --- a/arch/arm/configs/multi_v5_defconfig
>> +++ b/arch/arm/configs/multi_v5_defconfig
>> @@ -90,10 +90,14 @@ CONFIG_MTD_PHYSMAP=y
>>  CONFIG_MTD_NAND=y
>>  CONFIG_MTD_NAND_ATMEL=y
>>  CONFIG_MTD_NAND_ORION=y
>> +CONFIG_MTD_SPI_NOR=y
>> +CONFIG_SPI_ASPEED_SMC=y
>>  CONFIG_MTD_UBI=y
>>  CONFIG_BLK_DEV_LOOP=y
>>  CONFIG_ATMEL_TCLIB=y
>>  CONFIG_ATMEL_SSC=m
>> +CONFIG_ASPEED_LPC_CTRL=m
>> +CONFIG_ASPEED_LPC_SNOOP=m
>
> Any reason that you switch between module and built-in throughout? It's not clear from the commit message.

I tried to follow what the existing config did. Some things are
modules, but some subsystems aren't.

I figured there's no harm in getting some build coverage of our
drivers being modules.

Cheers,

Joel

On Tue, 24 Jul 2018, at 14:29, Joel Stanley wrote:
> On 24 July 2018 at 14:26, Andrew Jeffery <andrew@aj.id.au> wrote:
> >
> >
> > On Wed, 18 Jul 2018, at 23:23, Joel Stanley wrote:
> >> This enables the devices used in the AST2400 family of BMC SoCs:
> >>
> >>  - VUART
> >>  - SPI NOR
> >>  - LPC controller
> >>  - LPC snoop (port 80)
> >>  - Ethernet
> >>  - GPIO
> >>  - ADC
> >>  - I2C
> >>  - Random number generator
> >>  - IPMI KCS
> >>  - IPMI BT
> >>  - Fan/Tach
> >>
> >> Signed-off-by: Joel Stanley <joel@jms.id.au>
> >> ---
> >>  arch/arm/configs/multi_v5_defconfig | 14 +++++++++++++-
> >>  1 file changed, 13 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/
> >> multi_v5_defconfig
> >> index b647e249908e..318b76fa26d1 100644
> >> --- a/arch/arm/configs/multi_v5_defconfig
> >> +++ b/arch/arm/configs/multi_v5_defconfig
> >> @@ -90,10 +90,14 @@ CONFIG_MTD_PHYSMAP=y
> >>  CONFIG_MTD_NAND=y
> >>  CONFIG_MTD_NAND_ATMEL=y
> >>  CONFIG_MTD_NAND_ORION=y
> >> +CONFIG_MTD_SPI_NOR=y
> >> +CONFIG_SPI_ASPEED_SMC=y
> >>  CONFIG_MTD_UBI=y
> >>  CONFIG_BLK_DEV_LOOP=y
> >>  CONFIG_ATMEL_TCLIB=y
> >>  CONFIG_ATMEL_SSC=m
> >> +CONFIG_ASPEED_LPC_CTRL=m
> >> +CONFIG_ASPEED_LPC_SNOOP=m
> >
> > Any reason that you switch between module and built-in throughout? It's not clear from the commit message.
> 
> I tried to follow what the existing config did. Some things are
> modules, but some subsystems aren't.
> 
> I figured there's no harm in getting some build coverage of our
> drivers being modules.

Righto.

Acked-by: Andrew Jeffery <andrew@aj.id.au>

> 
> Cheers,
> 
> Joel