diff mbox series

[PATCH/RFT,4/6] i2c: davinci: set SDA as output for recovery

Message ID 20180713210920.3648-5-wsa+renesas@sang-engineering.com
State New
Headers show
Series i2c: recovery: fix GPIO usage for recovery | expand

Commit Message

Wolfram Sang July 13, 2018, 9:09 p.m. UTC 
This allows for sending STOP when generating pulses which is much more
robust because it will bring clients into a default state.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
 drivers/i2c/busses/i2c-davinci.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index d945a2654c2f..478acf0870aa 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -874,7 +874,8 @@  static int davinci_i2c_probe(struct platform_device *pdev)
 			r = PTR_ERR(rinfo->scl_gpiod);
 			goto err_unuse_clocks;
 		}
-		rinfo->sda_gpiod = devm_gpiod_get(&pdev->dev, "sda", GPIOD_IN);
+		rinfo->sda_gpiod = devm_gpiod_get(&pdev->dev, "sda",
+						  GPIOD_OUT_HIGH_OPEN_DRAIN);
 		if (IS_ERR(rinfo->sda_gpiod)) {
 			r = PTR_ERR(rinfo->sda_gpiod);
 			goto err_unuse_clocks;