| Message ID | 20180711013345.22951-1-masneyb@onstation.org |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | iio: pressure: bmp280: remove unused options from device tree documentation | expand |
On Tue, 10 Jul 2018 21:33:45 -0400 Brian Masney <masneyb@onstation.org> wrote: > There are several options in the device tree documentation that are > no longer relevant for the current in-kernel bmp280 driver so this patch > removes them. > > Signed-off-by: Brian Masney <masneyb@onstation.org> Fair enough I guess - though this may confuse anyone looking at new docs and running an old kernel with the misc driver still there. Applied to the togreg branch of iio.git > --- > Documentation/devicetree/bindings/iio/pressure/bmp085.txt | 7 ------- > 1 file changed, 7 deletions(-) > > diff --git a/Documentation/devicetree/bindings/iio/pressure/bmp085.txt b/Documentation/devicetree/bindings/iio/pressure/bmp085.txt > index c7198a03c906..abcab02504fb 100644 > --- a/Documentation/devicetree/bindings/iio/pressure/bmp085.txt > +++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.txt > @@ -8,10 +8,6 @@ Required properties: > "bosch,bme280" > > Optional properties: > -- chip-id: configurable chip id for non-default chip revisions > -- temp-measurement-period: temperature measurement period (milliseconds) > -- default-oversampling: default oversampling value to be used at startup, > - value range is 0-3 with rising sensitivity. > - interrupt-parent: should be the phandle for the interrupt controller > - interrupts: interrupt mapping for IRQ > - reset-gpios: a GPIO line handling reset of the sensor: as the line is > @@ -24,9 +20,6 @@ Example: > pressure@77 { > compatible = "bosch,bmp085"; > reg = <0x77>; > - chip-id = <10>; > - temp-measurement-period = <100>; > - default-oversampling = <2>; > interrupt-parent = <&gpio0>; > interrupts = <25 IRQ_TYPE_EDGE_RISING>; > reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/iio/pressure/bmp085.txt b/Documentation/devicetree/bindings/iio/pressure/bmp085.txt index c7198a03c906..abcab02504fb 100644 --- a/Documentation/devicetree/bindings/iio/pressure/bmp085.txt +++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.txt @@ -8,10 +8,6 @@ Required properties: "bosch,bme280" Optional properties: -- chip-id: configurable chip id for non-default chip revisions -- temp-measurement-period: temperature measurement period (milliseconds) -- default-oversampling: default oversampling value to be used at startup, - value range is 0-3 with rising sensitivity. - interrupt-parent: should be the phandle for the interrupt controller - interrupts: interrupt mapping for IRQ - reset-gpios: a GPIO line handling reset of the sensor: as the line is @@ -24,9 +20,6 @@ Example: pressure@77 { compatible = "bosch,bmp085"; reg = <0x77>; - chip-id = <10>; - temp-measurement-period = <100>; - default-oversampling = <2>; interrupt-parent = <&gpio0>; interrupts = <25 IRQ_TYPE_EDGE_RISING>; reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
There are several options in the device tree documentation that are no longer relevant for the current in-kernel bmp280 driver so this patch removes them. Signed-off-by: Brian Masney <masneyb@onstation.org> --- Documentation/devicetree/bindings/iio/pressure/bmp085.txt | 7 ------- 1 file changed, 7 deletions(-)