diff mbox series

[U-Boot,6/6] stm32mp1: clock tree update

Message ID 1531142244-22011-6-git-send-email-patrick.delaunay@st.com
State Accepted
Commit 8a07d5bfe1f7e3d21aebdc849219caddf9297244
Delegated to: Tom Rini
Headers show
Series [U-Boot,1/6] dts: import stm32mp1 device tree from linux kernel | expand

Commit Message

Patrick DELAUNAY July 9, 2018, 1:17 p.m. UTC 
Configure clock tree for all the devices.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
---

 arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi | 46 ++++++++++++++++++++++++--------
 1 file changed, 35 insertions(+), 11 deletions(-)

Comments

Tom Rini July 20, 2018, 10:35 p.m. UTC | #1 
On Mon, Jul 09, 2018 at 03:17:24PM +0200, Patrick Delaunay wrote:

> Configure clock tree for all the devices.
> 
> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>

Applied to u-boot/master, thanks!
diff mbox series

Patch

diff --git a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi
index f6d1528..39a0ebc 100644
--- a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi
@@ -73,18 +73,41 @@ 
 	>;
 
 	st,pkcs = <
-		CLK_CKPER_DISABLED
+		CLK_CKPER_HSE
+		CLK_FMC_ACLK
+		CLK_QSPI_ACLK
+		CLK_ETH_DISABLED
 		CLK_SDMMC12_PLL3R
+		CLK_DSI_DSIPLL
 		CLK_STGEN_HSE
-		CLK_I2C46_PCLK5
-		CLK_I2C12_PCLK1
+		CLK_USBPHY_HSE
+		CLK_SPI2S1_PLL3Q
+		CLK_SPI2S23_PLL3Q
+		CLK_SPI45_HSI
+		CLK_SPI6_HSI
+		CLK_I2C46_HSI
 		CLK_SDMMC3_PLL3R
-		CLK_I2C35_PCLK1
-		CLK_UART1_PCLK5
-		CLK_UART24_PCLK1
-		CLK_UART35_PCLK1
-		CLK_UART6_PCLK2
-		CLK_UART78_PCLK1
+		CLK_USBO_USBPHY
+		CLK_ADC_CKPER
+		CLK_CEC_LSE
+		CLK_I2C12_HSI
+		CLK_I2C35_HSI
+		CLK_UART1_HSI
+		CLK_UART24_HSI
+		CLK_UART35_HSI
+		CLK_UART6_HSI
+		CLK_UART78_HSI
+		CLK_SPDIF_PLL3Q
+		CLK_FDCAN_PLL4Q
+		CLK_SAI1_PLL3Q
+		CLK_SAI2_PLL3Q
+		CLK_SAI3_PLL3Q
+		CLK_SAI4_PLL3Q
+		CLK_RNG1_CSI
+		CLK_RNG2_CSI
+		CLK_LPTIM1_PCLK1
+		CLK_LPTIM23_PCLK3
+		CLK_LPTIM45_PCLK3
 	>;
 
 	/* VCO = 1300.0 MHz => P = 650 (CPU) */
@@ -101,9 +124,10 @@ 
 		u-boot,dm-pre-reloc;
 	};
 
-	/* VCO = 774.0 MHz => P = 194, Q = 37, R = 97 */
+	/* VCO = 786.4 MHz => P = 197, Q = 49, R = 98 */
 	pll3: st,pll@2 {
-		cfg = < 3 128 3 20 7 PQR(1,1,1) >;
+		cfg = < 2 97 3 15 7 PQR(1,1,1) >;
+		frac = < 0x9ba >;
 		u-boot,dm-pre-reloc;
 	};