| Message ID | 1530958183-10956-4-git-send-email-pawel.mikolaj.chmiel@gmail.com |
|---|---|
| State | New |
| Headers | show |
| Series | Initial support for Samsung Galaxy S and Galaxy S 4G | expand |
On Sat, Jul 07, 2018 at 12:09:41PM +0200, Paweł Chmiel wrote: > From: Jonathan Bakker <xc-racer2@live.ca> > > This DTS file have initial support Samsung SGH-T959P phone, > also known as Samsung Galaxy S 4G or fascinate4g. > It belongs to Samsung Aries devices family. > Initial version have support for: > - sdcard > - max8998 pmic and rtc > - max17040 fuel gauge > - gpio keys > - fimd (no panel driver yet) > - usb (peripherial mode) > - wifi > > Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> > Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> > --- > > Changes from v1: > - Added missing commit msg > - Removed duplicated and unneeded headers > - Added stdout-path > - Added information why we hardcode bootargs > --- > --- > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/s5pv210-fascinate4g.dts | 45 +++++++++++++++++++++++++++++++ > 2 files changed, 46 insertions(+) Thanks, applied. Best regards, Krzysztof
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 522ebdca1d3d..d00e995875bb 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -846,6 +846,7 @@ dtb-$(CONFIG_ARCH_S3C64XX) += \ s3c6410-smdk6410.dtb dtb-$(CONFIG_ARCH_S5PV210) += \ s5pv210-aquila.dtb \ + s5pv210-fascinate4g.dtb \ s5pv210-galaxys.dtb \ s5pv210-goni.dtb \ s5pv210-smdkc110.dtb \ diff --git a/arch/arm/boot/dts/s5pv210-fascinate4g.dts b/arch/arm/boot/dts/s5pv210-fascinate4g.dts new file mode 100644 index 000000000000..ccf761b1babf --- /dev/null +++ b/arch/arm/boot/dts/s5pv210-fascinate4g.dts @@ -0,0 +1,45 @@ +// SPDX-License-Identifier: GPL-2.0 + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "s5pv210-aries.dtsi" + +/ { + model = "Samsung Galaxy S Fascinate 4G (SGH-T959P) based on S5PV210"; + compatible = "samsung,fascinate4g", "samsung,aries", "samsung,s5pv210"; + + chosen { + stdout-path = &uart2; + /* + * It's hard to change those parameters in stock bootloader, + * since it requires special hardware/cable. + * Let's hardocde bootargs for now, till u-boot port is finished, + * with which it should be easier. + */ + bootargs = "root=/dev/mmcblk1p1 rw rootwait ignore_loglevel earlyprintk"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "power"; + gpios = <&gph2 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + wakeup-source; + }; + + vol-down { + label = "volume_down"; + gpios = <&gph3 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + }; + + vol-up { + label = "volume_up"; + gpios = <&gph3 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; +};