[2/3] pinctrl: msm: Fix msm_config_group_get() to be compliant

Message ID 20180702225939.109169-2-dianders@chromium.org
State New
Headers show
Series
  • [1/3] pinctrl: Document pin_config_group_get() return codes like pin_config_get()
Related show

Commit Message

Doug Anderson July 2, 2018, 10:59 p.m.
If you do this on an sdm845 board:
  cat /sys/kernel/debug/pinctrl/3400000.pinctrl/pinconf-groups

...it looks like nonsense.  For every pin you see listed:
  input bias bus hold, input bias disabled, input bias pull down, input bias pull up

That's because msm_config_group_get() isn't complying with the rules
that pinconf_generic_dump_one() expects.  Specifically for boolean
parameters (anything with a "struct pin_config_item" where has_arg is
false) the function expects that the function should return its value
not through the "config" parameter but should return "0" if the value
is set and "-EINVAL" if the value isn't set.

Let's fix this.

From a quick sample of other pinctrl drivers, it appears to be
tradition to also return 1 through the config parameter for these
boolean parameters when they exist.  I'm not one to knock tradition,
so I'll follow tradition and return 1 in these cases.  While I'm at
it, I'll also continue searching for four leaf clovers, kocking on
wood three times, and trying not to break mirrors.

Fixes: f365be092572 ("pinctrl: Add Qualcomm TLMM driver")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
---

 drivers/pinctrl/qcom/pinctrl-msm.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

Comments

Linus Walleij July 9, 2018, 11:15 a.m. | #1
On Tue, Jul 3, 2018 at 1:00 AM Douglas Anderson <dianders@chromium.org> wrote:

> If you do this on an sdm845 board:
>   cat /sys/kernel/debug/pinctrl/3400000.pinctrl/pinconf-groups
>
> ...it looks like nonsense.  For every pin you see listed:
>   input bias bus hold, input bias disabled, input bias pull down, input bias pull up
>
> That's because msm_config_group_get() isn't complying with the rules
> that pinconf_generic_dump_one() expects.  Specifically for boolean
> parameters (anything with a "struct pin_config_item" where has_arg is
> false) the function expects that the function should return its value
> not through the "config" parameter but should return "0" if the value
> is set and "-EINVAL" if the value isn't set.
>
> Let's fix this.
>
> From a quick sample of other pinctrl drivers, it appears to be
> tradition to also return 1 through the config parameter for these
> boolean parameters when they exist.  I'm not one to knock tradition,
> so I'll follow tradition and return 1 in these cases.  While I'm at
> it, I'll also continue searching for four leaf clovers, kocking on
> wood three times, and trying not to break mirrors.
>
> Fixes: f365be092572 ("pinctrl: Add Qualcomm TLMM driver")
> Signed-off-by: Douglas Anderson <dianders@chromium.org>

Looks solid to me so patch applied, unless Bjorn has objections
it stays in.

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Patch

diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c
index 0e22f52b2a19..2155a30c282b 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
@@ -250,22 +250,30 @@  static int msm_config_group_get(struct pinctrl_dev *pctldev,
 	/* Convert register value to pinconf value */
 	switch (param) {
 	case PIN_CONFIG_BIAS_DISABLE:
-		arg = arg == MSM_NO_PULL;
+		if (arg != MSM_NO_PULL)
+			return -EINVAL;
+		arg = 1;
 		break;
 	case PIN_CONFIG_BIAS_PULL_DOWN:
-		arg = arg == MSM_PULL_DOWN;
+		if (arg != MSM_PULL_DOWN)
+			return -EINVAL;
+		arg = 1;
 		break;
 	case PIN_CONFIG_BIAS_BUS_HOLD:
 		if (pctrl->soc->pull_no_keeper)
 			return -ENOTSUPP;
 
-		arg = arg == MSM_KEEPER;
+		if (arg != MSM_KEEPER)
+			return -EINVAL;
+		arg = 1;
 		break;
 	case PIN_CONFIG_BIAS_PULL_UP:
 		if (pctrl->soc->pull_no_keeper)
 			arg = arg == MSM_PULL_UP_NO_KEEPER;
 		else
 			arg = arg == MSM_PULL_UP;
+		if (!arg)
+			return -EINVAL;
 		break;
 	case PIN_CONFIG_DRIVE_STRENGTH:
 		arg = msm_regval_to_drive(arg);