[v4,4/6] arm64: dts: actions: Enable I2C1 and I2C2 in Bubblegum-96 board

Message ID 20180701172305.15663-5-manivannan.sadhasivam@linaro.org
State New
Headers show
Series
  • Add Actions Semiconductor Owl S900 I2C support
Related show

Commit Message

Manivannan Sadhasivam July 1, 2018, 5:23 p.m.
Enable I2C1 and I2C2 exposed on the low speed expansion connector in
Bubblegum-96 board.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 arch/arm64/boot/dts/actions/s900-bubblegum-96.dts | 11 +++++++++++
 1 file changed, 11 insertions(+)

Patch

diff --git a/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts b/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts
index d0ba35df9015..57ae374cfb5a 100644
--- a/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts
+++ b/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts
@@ -7,6 +7,7 @@ 
 /dts-v1/;
 
 #include "s900.dtsi"
+#include "s900-bubblegum-96-pins.dtsi"
 
 / {
 	compatible = "ucrobotics,bubblegum-96", "actions,s900";
@@ -35,6 +36,16 @@ 
 	clocks = <&cmu CLK_UART5>;
 };
 
+&i2c1 {
+	status = "okay";
+	clocks = <&cmu CLK_I2C1>;
+};
+
+&i2c2 {
+	status = "okay";
+	clocks = <&cmu CLK_I2C2>;
+};
+
 /*
  * GPIO name legend: proper name = the GPIO line is used as GPIO
  *         NC = not connected (pin out but not routed from the chip to