@@ -72,6 +72,7 @@ MODULE_FIRMWARE("b43/ucode11.fw");
MODULE_FIRMWARE("b43/ucode13.fw");
MODULE_FIRMWARE("b43/ucode14.fw");
MODULE_FIRMWARE("b43/ucode15.fw");
+MODULE_FIRMWARE("b43/ucode16_mimo.fw");
MODULE_FIRMWARE("b43/ucode5.fw");
MODULE_FIRMWARE("b43/ucode9.fw");
@@ -316,12 +316,18 @@ int iwl4965_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
hdr_len = ieee80211_hdrlen(fc);
- /* Find index into station table for destination station */
- sta_id = iwl_legacy_sta_id_or_broadcast(priv, ctx, info->control.sta);
- if (sta_id == IWL_INVALID_STATION) {
- IWL_DEBUG_DROP(priv, "Dropping - INVALID STATION: %pM\n",
- hdr->addr1);
- goto drop_unlock;
+ /* For management frames use broadcast id to do not break aggregation */
+ if (!ieee80211_is_data(fc))
+ sta_id = ctx->bcast_sta_id;
+ else {
+ /* Find index into station table for destination station */
+ sta_id = iwl_legacy_sta_id_or_broadcast(priv, ctx, info->control.sta);
+
+ if (sta_id == IWL_INVALID_STATION) {
+ IWL_DEBUG_DROP(priv, "Dropping - INVALID STATION: %pM\n",
+ hdr->addr1);
+ goto drop_unlock;
+ }
}
IWL_DEBUG_TX(priv, "station Id %d\n", sta_id);
@@ -48,8 +48,21 @@ module_param(led_mode, int, S_IRUGO);
MODULE_PARM_DESC(led_mode, "0=system default, "
"1=On(RF On)/Off(RF Off), 2=blinking");
+/* Throughput OFF time(ms) ON time (ms)
+ * >300 25 25
+ * >200 to 300 40 40
+ * >100 to 200 55 55
+ * >70 to 100 65 65
+ * >50 to 70 75 75
+ * >20 to 50 85 85
+ * >10 to 20 95 95
+ * >5 to 10 110 110
+ * >1 to 5 130 130
+ * >0 to 1 167 167
+ * <=0 SOLID ON
+ */
static const struct ieee80211_tpt_blink iwl_blink[] = {
- { .throughput = 0 * 1024 - 1, .blink_time = 334 },
+ { .throughput = 0, .blink_time = 334 },
{ .throughput = 1 * 1024 - 1, .blink_time = 260 },
{ .throughput = 5 * 1024 - 1, .blink_time = 220 },
{ .throughput = 10 * 1024 - 1, .blink_time = 190 },
@@ -101,6 +114,11 @@ static int iwl_legacy_led_cmd(struct iwl_priv *priv,
if (priv->blink_on == on && priv->blink_off == off)
return 0;
+ if (off == 0) {
+ /* led is SOLID_ON */
+ on = IWL_LED_SOLID;
+ }
+
IWL_DEBUG_LED(priv, "Led blink time compensation=%u\n",
priv->cfg->base_params->led_compensation);
led_cmd.on = iwl_legacy_blink_compensation(priv, on,
@@ -2984,15 +2984,15 @@ static void iwl4965_bg_txpower_work(struct work_struct *work)
struct iwl_priv *priv = container_of(work, struct iwl_priv,
txpower_work);
+ mutex_lock(&priv->mutex);
+
/* If a scan happened to start before we got here
* then just return; the statistics notification will
* kick off another scheduled work to compensate for
* any temperature delta we missed here. */
if (test_bit(STATUS_EXIT_PENDING, &priv->status) ||
test_bit(STATUS_SCANNING, &priv->status))
- return;
-
- mutex_lock(&priv->mutex);
+ goto out;
/* Regardless of if we are associated, we must reconfigure the
* TX power since frames can be sent on non-radar channels while
@@ -3002,7 +3002,7 @@ static void iwl4965_bg_txpower_work(struct work_struct *work)
/* Update last_temperature to keep is_calib_needed from running
* when it isn't needed... */
priv->last_temperature = priv->temperature;
-
+out:
mutex_unlock(&priv->mutex);
}
@@ -568,12 +568,17 @@ int iwlagn_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
hdr_len = ieee80211_hdrlen(fc);
- /* Find index into station table for destination station */
- sta_id = iwl_sta_id_or_broadcast(priv, ctx, info->control.sta);
- if (sta_id == IWL_INVALID_STATION) {
- IWL_DEBUG_DROP(priv, "Dropping - INVALID STATION: %pM\n",
- hdr->addr1);
- goto drop_unlock;
+ /* For management frames use broadcast id to do not break aggregation */
+ if (!ieee80211_is_data(fc))
+ sta_id = ctx->bcast_sta_id;
+ else {
+ /* Find index into station table for destination station */
+ sta_id = iwl_sta_id_or_broadcast(priv, ctx, info->control.sta);
+ if (sta_id == IWL_INVALID_STATION) {
+ IWL_DEBUG_DROP(priv, "Dropping - INVALID STATION: %pM\n",
+ hdr->addr1);
+ goto drop_unlock;
+ }
}
IWL_DEBUG_TX(priv, "station Id %d\n", sta_id);
Dave, Here are a few more intended for 2.6.39. There is a one-liner for b43 which adds a missing MODULE_FIRMWARE declaration (so maybe someone's initrd will get generated correctly), an iwlegacy fix from Wey-Yi that corrects an LED flashing change that people are complaining about, an iwl4965 WARNING fix from Stanislaw, and a matching pair of iwlagn and iwl4965 regression fixes also from Stanislaw that correct problems with using the wrong station ID for block ACK sessions. Please let me know if there are problems! John P.S. I know the LED flashing fix is questionable, but it is an annoyance and it should not effect any other hardware. --- The following changes since commit 7cfd260910b881250cde76ba92ebe3cbf8493a8f: ipv4: don't spam dmesg with "Using LC-trie" messages (2011-05-01 23:17:50 -0700) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git master Rafał Miłecki (1): b43: trivial: update module info about ucode16_mimo firmware Stanislaw Gruszka (3): iwl4965: fix "TX Power requested while scanning" iwlagn: fix "Received BA when not expected" iwl4965: fix "Received BA when not expected" Wey-Yi Guy (1): iwlegacy: led stay solid on when no traffic drivers/net/wireless/b43/main.c | 1 + drivers/net/wireless/iwlegacy/iwl-4965-tx.c | 18 ++++++++++++------ drivers/net/wireless/iwlegacy/iwl-led.c | 20 +++++++++++++++++++- drivers/net/wireless/iwlegacy/iwl4965-base.c | 8 ++++---- drivers/net/wireless/iwlwifi/iwl-agn-tx.c | 17 +++++++++++------ 5 files changed, 47 insertions(+), 17 deletions(-)