diff mbox series

[v2,1/3] dt-bindings: pinctrl: Add gpio interrupt bindings for Actions S900 SoC

Message ID 20180623045954.6729-2-manivannan.sadhasivam@linaro.org
State New
Headers show
Series Add gpio interrupt support for Actions Semi S900 SoC | expand

Commit Message

Manivannan Sadhasivam June 23, 2018, 4:59 a.m. UTC 
Add gpio interrupt bindings for Actions Semi S900 SoC.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../bindings/pinctrl/actions,s900-pinctrl.txt          | 10 ++++++++++
 1 file changed, 10 insertions(+)

Comments

Linus Walleij June 29, 2018, 12:27 p.m. UTC | #1 
On Sat, Jun 23, 2018 at 7:00 AM Manivannan Sadhasivam
<manivannan.sadhasivam@linaro.org> wrote:

> Add gpio interrupt bindings for Actions Semi S900 SoC.
>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> Reviewed-by: Rob Herring <robh@kernel.org>

Patch applied.

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/actions,s900-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/actions,s900-pinctrl.txt
index 8fb5a53775e8..81b58dddd3ed 100644
--- a/Documentation/devicetree/bindings/pinctrl/actions,s900-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/actions,s900-pinctrl.txt
@@ -19,6 +19,10 @@  Required Properties:
                     defines the interrupt number, the second encodes
                     the trigger flags described in
                     bindings/interrupt-controller/interrupts.txt
+- interrupts: The interrupt outputs from the controller. There is one GPIO
+              interrupt per GPIO bank. The number of interrupts listed depends
+              on the number of GPIO banks on the SoC. The interrupts must be
+              ordered by bank, starting with bank 0.
 
 Please refer to pinctrl-bindings.txt in this directory for details of the
 common pinctrl bindings used by client devices, including the meaning of the
@@ -180,6 +184,12 @@  Example:
                   #gpio-cells = <2>;
                   interrupt-controller;
                   #interrupt-cells = <2>;
+                  interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+                               <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+                               <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+                               <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+                               <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+                               <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 
                   uart2-default: uart2-default {
                           pinmux {