diff mbox series

[14/14] net: pch_gbe: Clean up pch_gbe_set_multi

Message ID 20180623031753.31893-15-paul.burton@mips.com
State Accepted, archived
Delegated to: David Miller
Headers show
Series net: pch_gbe: Cleanups | expand

Commit Message

Paul Burton June 23, 2018, 3:17 a.m. UTC
Refactor pch_gbe_set_multi in order to avoid unnecessary indentation &
make it clearer what the code is doing.

The one behavioral change from this patch is that we'll no longer
configure the MAC address registers for multicast addresses when the
IFF_PROMISC or IFF_ALLMULTI flags are set. In these cases, just as when
we want to monitor more multicast addresses than we have MAC address
registers, we disable multicast filtering so the MAC address registers
are unused.

Signed-off-by: Paul Burton <paul.burton@mips.com>

---

 .../ethernet/oki-semi/pch_gbe/pch_gbe_main.c  | 33 +++++++++----------
 1 file changed, 16 insertions(+), 17 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
index dc8c4050fad3..43c0c10dfeb7 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
@@ -2110,28 +2110,27 @@  static void pch_gbe_set_multi(struct net_device *netdev)
 
 	netdev_dbg(netdev, "netdev->flags : 0x%08x\n", netdev->flags);
 
-	/* Check for Promiscuous and All Multicast modes */
+	/* By default enable address & multicast filtering */
 	rctl = ioread32(&hw->reg->RX_MODE);
+	rctl |= PCH_GBE_ADD_FIL_EN | PCH_GBE_MLT_FIL_EN;
+
+	/* Promiscuous mode disables all hardware address filtering */
+	if (netdev->flags & IFF_PROMISC)
+		rctl &= ~(PCH_GBE_ADD_FIL_EN | PCH_GBE_MLT_FIL_EN);
+
+	/* If we want to monitor more multicast addresses than the hardware can
+	 * support then disable hardware multicast filtering.
+	 */
 	mc_count = netdev_mc_count(netdev);
-	if ((netdev->flags & IFF_PROMISC)) {
-		rctl &= ~PCH_GBE_ADD_FIL_EN;
+	if ((netdev->flags & IFF_ALLMULTI) || mc_count >= PCH_GBE_MAR_ENTRIES)
 		rctl &= ~PCH_GBE_MLT_FIL_EN;
-	} else if ((netdev->flags & IFF_ALLMULTI)) {
-		/* all the multicasting receive permissions */
-		rctl |= PCH_GBE_ADD_FIL_EN;
-		rctl &= ~PCH_GBE_MLT_FIL_EN;
-	} else {
-		if (mc_count >= PCH_GBE_MAR_ENTRIES) {
-			/* all the multicasting receive permissions */
-			rctl |= PCH_GBE_ADD_FIL_EN;
-			rctl &= ~PCH_GBE_MLT_FIL_EN;
-		} else {
-			rctl |= (PCH_GBE_ADD_FIL_EN | PCH_GBE_MLT_FIL_EN);
-		}
-	}
+
 	iowrite32(rctl, &hw->reg->RX_MODE);
 
-	if (mc_count >= PCH_GBE_MAR_ENTRIES)
+	/* If we're not using multicast filtering then there's no point
+	 * configuring the unused MAC address registers.
+	 */
+	if (!(rctl & PCH_GBE_MLT_FIL_EN))
 		return;
 
 	/* Load the first set of multicast addresses into MAC address registers