diff mbox series

[v0,07/12] mlxsw: core: Set different thermal polling time based on bus type

Message ID 1529594883-20619-8-git-send-email-vadimp@mellanox.com
State Deferred, archived
Delegated to: David Miller
Headers show
Series mlxsw thermal monitoring amendments | expand

Commit Message

Vadim Pasternak June 21, 2018, 3:28 p.m. UTC 
Use different thermal monitoring based on bus type.
For I2C bus time is set to 20 seconds, while for PCIe 1 second polling
interval is used.

Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
---
 drivers/net/ethernet/mellanox/mlxsw/core_thermal.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c b/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
index d866c98..152591d8 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
@@ -41,6 +41,7 @@ 
 #include "core.h"
 
 #define MLXSW_THERMAL_POLL_INT	1000	/* ms */
+#define MLXSW_THERMAL_SLOW_POLL_INT	20000	/* ms */
 #define MLXSW_THERMAL_MAX_TEMP	110000	/* 110C */
 #define MLXSW_THERMAL_MAX_STATE	10
 #define MLXSW_THERMAL_MAX_DUTY	255
@@ -95,6 +96,7 @@  struct mlxsw_thermal {
 	struct mlxsw_core *core;
 	const struct mlxsw_bus_info *bus_info;
 	struct thermal_zone_device *tzdev;
+	int polling_delay;
 	struct thermal_cooling_device *cdevs[MLXSW_MFCR_PWMS_MAX];
 	struct mlxsw_thermal_trip trips[MLXSW_THERMAL_NUM_TRIPS];
 	enum thermal_device_mode mode;
@@ -190,7 +192,7 @@  static int mlxsw_thermal_set_mode(struct thermal_zone_device *tzdev,
 	mutex_lock(&tzdev->lock);
 
 	if (mode == THERMAL_DEVICE_ENABLED)
-		tzdev->polling_delay = MLXSW_THERMAL_POLL_INT;
+		tzdev->polling_delay = thermal->polling_delay;
 	else
 		tzdev->polling_delay = 0;
 
@@ -397,13 +399,18 @@  int mlxsw_thermal_init(struct mlxsw_core *core,
 		}
 	}
 
+	if (bus_info->low_frequency)
+		thermal->polling_delay = MLXSW_THERMAL_SLOW_POLL_INT;
+	else
+		thermal->polling_delay = MLXSW_THERMAL_POLL_INT;
+
 	thermal->tzdev = thermal_zone_device_register("mlxsw",
 						      MLXSW_THERMAL_NUM_TRIPS,
 						      MLXSW_THERMAL_TRIP_MASK,
 						      thermal,
 						      &mlxsw_thermal_ops,
 						      NULL, 0,
-						      MLXSW_THERMAL_POLL_INT);
+						      thermal->polling_delay);
 	if (IS_ERR(thermal->tzdev)) {
 		err = PTR_ERR(thermal->tzdev);
 		dev_err(dev, "Failed to register thermal zone\n");