diff mbox series

[v5,2/6] mtd: rawnand: add an option to specify NAND chip as a boot device

Message ID 20180617204605.4648-3-stefan@agner.ch
State Changes Requested
Delegated to: Miquel Raynal
Headers show
Series mtd: rawnand: add NVIDIA Tegra NAND flash support | expand

Commit Message

Stefan Agner June 17, 2018, 8:46 p.m. UTC 
Allow to define a NAND chip as a boot device. This can be helpful
for the selection of the ECC algorithm and strength in case the boot
ROM supports only a subset of controller provided options.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
---
 Documentation/devicetree/bindings/mtd/nand.txt | 4 ++++
 drivers/mtd/nand/raw/nand_base.c               | 3 +++
 include/linux/mtd/rawnand.h                    | 6 ++++++
 3 files changed, 13 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/mtd/nand.txt b/Documentation/devicetree/bindings/mtd/nand.txt
index eaef8c657aa5c..e949c778e9837 100644
--- a/Documentation/devicetree/bindings/mtd/nand.txt
+++ b/Documentation/devicetree/bindings/mtd/nand.txt
@@ -43,6 +43,10 @@  Optional NAND chip properties:
 		     This is particularly useful when only the in-band area is
 		     used by the upper layers, and you want to make your NAND
 		     as reliable as possible.
+- nand-is-boot-medium: Whether the NAND chip is a boot medium. Drivers might use
+		       this information to select ECC algorithms supported by
+		       the boot ROM or similar restrictions.
+
 - nand-rb: shall contain the native Ready/Busy ids.
 
 The ECC strength and ECC step size properties define the correction capability
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index 47e9cb9063da4..e70bf328c64e4 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -5859,6 +5859,9 @@  static int nand_dt_init(struct nand_chip *chip)
 	if (of_get_nand_bus_width(dn) == 16)
 		chip->options |= NAND_BUSWIDTH_16;
 
+	if (of_property_read_bool(dn, "nand-is-boot-medium"))
+		chip->options |= NAND_IS_BOOT_MEDIUM;
+
 	if (of_get_nand_on_flash_bbt(dn))
 		chip->bbt_options |= NAND_BBT_USE_FLASH;
 
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index 2d9cb7acbc3d8..80aeeca03f36b 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -219,6 +219,12 @@  enum nand_ecc_algo {
  */
 #define NAND_WAIT_TCCS		0x00200000
 
+/*
+ * Whether the NAND chip is a boot medium. Drivers might use this information
+ * to select ECC algorithms supported by the boot ROM or similar restrictions.
+ */
+#define NAND_IS_BOOT_MEDIUM	0x00400000
+
 /* Options set by nand scan */
 /* Nand scan has allocated controller struct */
 #define NAND_CONTROLLER_ALLOC	0x80000000