@@ -99,15 +99,16 @@ Optional endpoint properties
determines the logical lane number, while the value of an entry indicates
physical lane, e.g. for 2-lane MIPI CSI-2 bus we could have
"data-lanes = <1 2>;", assuming the clock lane is on hardware lane 0.
- This property is valid for serial busses only (e.g. MIPI CSI-2).
+ This property is valid for serial busses only (e.g. MIPI CSI-2, MIPI DSI,
+ DisplayPort).
- clock-lanes: an array of physical clock lane indexes. Position of an entry
determines the logical lane number, while the value of an entry indicates
physical lane, e.g. for a MIPI CSI-2 bus we could have "clock-lanes = <0>;",
which places the clock lane on hardware lane 0. This property is valid for
serial busses only (e.g. MIPI CSI-2). Note that for the MIPI CSI-2 bus this
array contains only one entry.
-- clock-noncontinuous: a boolean property to allow MIPI CSI-2 non-continuous
- clock mode.
+- clock-noncontinuous: a boolean property to allow non-continuous clock mode.
+ This property is valid for serial busses (e.g. MIPI CSI-2, MIPI DSI and DisplayPort).
- link-frequencies: Allowed data bus frequencies. For MIPI CSI-2, for
instance, this is the actual frequency of the bus, not bits per clock per
lane value. An array of 64-bit unsigned integers.
@@ -116,7 +117,8 @@ Optional endpoint properties
Valid values are 0 (normal) and 1 (inverted). The length of the array
should be the combined length of data-lanes and clock-lanes properties.
If the lane-polarities property is omitted, the value must be interpreted
- as 0 (normal). This property is valid for serial busses only.
+ as 0 (normal). This property is valid for serial busses only (e.g. MIPI CSI-2,
+ MIPI DSI, DisplayPort).
- strobe: Whether the clock signal is used as clock (0) or strobe (1). Used
with CCP2, for instance.
Properties like data-lanes, clock-noncontinuous and lane-polarities are applicable to DSI and DisplayPort interface also. So update the documentation to mention the same. Signed-off-by: Sandeep Panda <spanda@codeaurora.org> --- Documentation/devicetree/bindings/media/video-interfaces.txt | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)