Message ID | 20180608204816.15226-1-aford173@gmail.com |
---|---|
State | Superseded |
Delegated to: | Tom Rini |
Headers | show |
Series | [U-Boot] block: Add SPL_BLOCK_CACHE and default n | expand |
On Fri, Jun 8, 2018 at 9:48 PM Adam Ford <aford173@gmail.com> wrote: > > When enabling BLOCK_CACHE on devices with limited RAM during SPL, > some devices may not boot. This creates an option to enable > block caching in SPL by defaults off. It is dependant on BLOCK_CACHE > and SPL_BLK > > Fixes: 46960ad6d09b ("block: Have BLOCK_CACHE default to y in some cases") > > Signed-off-by: Adam Ford <aford173@gmail.com> > > diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig > index 0792373cfc..8ef363b3d4 100644 > --- a/drivers/block/Kconfig > +++ b/drivers/block/Kconfig > @@ -37,6 +37,13 @@ config BLOCK_CACHE > it will prevent repeated reads from directory structures and other > filesystem data structures. > > +config SPL_BLOCK_CACHE > + bool "Use block device cache in SPL" > + depends on BLOCK_CACHE && SPL_BLK > + default n > + help > + This option enables the disk-block cache in SPL > + > config IDE > bool "Support IDE controllers" > select HAVE_BLOCK_DEVICE > diff --git a/drivers/block/Makefile b/drivers/block/Makefile > index 5fcafb193e..a9af28a552 100644 > --- a/drivers/block/Makefile > +++ b/drivers/block/Makefile > @@ -11,4 +11,9 @@ endif > > obj-$(CONFIG_IDE) += ide.o > obj-$(CONFIG_SANDBOX) += sandbox.o > +ifdef CONFIG_SPL_BUILD > +obj-$(SPL_BLOCK_CACHE) += blkcache.o CONFIG_SPL_BLOCK_CACHE? > +endif > +ifndef CONFIG_SPL_BUILD > obj-$(CONFIG_BLOCK_CACHE) += blkcache.o > +endif Could this all get replaced by: obj-$(CONFIG_$(SPL_)BLOCK_CACHE) += blkcache.o > diff --git a/include/blk.h b/include/blk.h > index fc0c239e46..c17c5eb047 100644 > --- a/include/blk.h > +++ b/include/blk.h > @@ -111,7 +111,8 @@ struct blk_desc { > #define PAD_TO_BLOCKSIZE(size, blk_desc) \ > (PAD_SIZE(size, blk_desc->blksz)) > > -#ifdef CONFIG_BLOCK_CACHE > +#if (defined(CONFIG_BLOCK_CACHE) && !defined(CONFIG_SPL_BUILD)) || \ > + (defined(CONFIG_SPL_BLOCK_CACHE) && defined(CONFIG_SPL_BUILD)) > /** Replace with CONFIG_IS_ENABLED? > * blkcache_read() - attempt to read a set of blocks from cache > * > -- > 2.17.1 > > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > https://lists.denx.de/listinfo/u-boot
On Sat, Jun 9, 2018 at 8:26 AM Alex Kiernan <alex.kiernan@gmail.com> wrote: > > On Fri, Jun 8, 2018 at 9:48 PM Adam Ford <aford173@gmail.com> wrote: > > > > When enabling BLOCK_CACHE on devices with limited RAM during SPL, > > some devices may not boot. This creates an option to enable > > block caching in SPL by defaults off. It is dependant on BLOCK_CACHE > > and SPL_BLK > > > > Fixes: 46960ad6d09b ("block: Have BLOCK_CACHE default to y in some cases") > > > > Signed-off-by: Adam Ford <aford173@gmail.com> > > > > diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig > > index 0792373cfc..8ef363b3d4 100644 > > --- a/drivers/block/Kconfig > > +++ b/drivers/block/Kconfig > > @@ -37,6 +37,13 @@ config BLOCK_CACHE > > it will prevent repeated reads from directory structures and other > > filesystem data structures. > > > > +config SPL_BLOCK_CACHE > > + bool "Use block device cache in SPL" > > + depends on BLOCK_CACHE && SPL_BLK > > + default n > > + help > > + This option enables the disk-block cache in SPL > > + > > config IDE > > bool "Support IDE controllers" > > select HAVE_BLOCK_DEVICE > > diff --git a/drivers/block/Makefile b/drivers/block/Makefile > > index 5fcafb193e..a9af28a552 100644 > > --- a/drivers/block/Makefile > > +++ b/drivers/block/Makefile > > @@ -11,4 +11,9 @@ endif > > > > obj-$(CONFIG_IDE) += ide.o > > obj-$(CONFIG_SANDBOX) += sandbox.o > > +ifdef CONFIG_SPL_BUILD > > +obj-$(SPL_BLOCK_CACHE) += blkcache.o > > CONFIG_SPL_BLOCK_CACHE? > > > +endif > > +ifndef CONFIG_SPL_BUILD > > obj-$(CONFIG_BLOCK_CACHE) += blkcache.o > > +endif > > Could this all get replaced by: > > obj-$(CONFIG_$(SPL_)BLOCK_CACHE) += blkcache.o > Nicely done. I am not that familiar with Makefiles and how to clean that up, but it seems to work work this way at least for the AM3517 EVM. > > diff --git a/include/blk.h b/include/blk.h > > index fc0c239e46..c17c5eb047 100644 > > --- a/include/blk.h > > +++ b/include/blk.h > > @@ -111,7 +111,8 @@ struct blk_desc { > > #define PAD_TO_BLOCKSIZE(size, blk_desc) \ > > (PAD_SIZE(size, blk_desc->blksz)) > > > > -#ifdef CONFIG_BLOCK_CACHE > > +#if (defined(CONFIG_BLOCK_CACHE) && !defined(CONFIG_SPL_BUILD)) || \ > > + (defined(CONFIG_SPL_BLOCK_CACHE) && defined(CONFIG_SPL_BUILD)) > > /** > > Replace with CONFIG_IS_ENABLED? I tried replacing 'defined(x)' with 'CONFIG_IS_ENABLED(x)' and I got a bunch of build errors. The only way I could get it to work was using 'defined(x)' adam > > > * blkcache_read() - attempt to read a set of blocks from cache > > * > > -- > > 2.17.1 > > > > _______________________________________________ > > U-Boot mailing list > > U-Boot@lists.denx.de > > https://lists.denx.de/listinfo/u-boot > > > > -- > Alex Kiernan
On Sat, Jun 9, 2018 at 3:04 PM Adam Ford <aford173@gmail.com> wrote: > > On Sat, Jun 9, 2018 at 8:26 AM Alex Kiernan <alex.kiernan@gmail.com> wrote: > > > > On Fri, Jun 8, 2018 at 9:48 PM Adam Ford <aford173@gmail.com> wrote: > > > > > > When enabling BLOCK_CACHE on devices with limited RAM during SPL, > > > some devices may not boot. This creates an option to enable > > > block caching in SPL by defaults off. It is dependant on BLOCK_CACHE > > > and SPL_BLK > > > > > > Fixes: 46960ad6d09b ("block: Have BLOCK_CACHE default to y in some cases") > > > > > > Signed-off-by: Adam Ford <aford173@gmail.com> > > > > > > diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig > > > index 0792373cfc..8ef363b3d4 100644 > > > --- a/drivers/block/Kconfig > > > +++ b/drivers/block/Kconfig > > > @@ -37,6 +37,13 @@ config BLOCK_CACHE > > > it will prevent repeated reads from directory structures and other > > > filesystem data structures. > > > > > > +config SPL_BLOCK_CACHE > > > + bool "Use block device cache in SPL" > > > + depends on BLOCK_CACHE && SPL_BLK > > > + default n > > > + help > > > + This option enables the disk-block cache in SPL > > > + > > > config IDE > > > bool "Support IDE controllers" > > > select HAVE_BLOCK_DEVICE > > > diff --git a/drivers/block/Makefile b/drivers/block/Makefile > > > index 5fcafb193e..a9af28a552 100644 > > > --- a/drivers/block/Makefile > > > +++ b/drivers/block/Makefile > > > @@ -11,4 +11,9 @@ endif > > > > > > obj-$(CONFIG_IDE) += ide.o > > > obj-$(CONFIG_SANDBOX) += sandbox.o > > > +ifdef CONFIG_SPL_BUILD > > > +obj-$(SPL_BLOCK_CACHE) += blkcache.o > > > > CONFIG_SPL_BLOCK_CACHE? > > > > > +endif > > > +ifndef CONFIG_SPL_BUILD > > > obj-$(CONFIG_BLOCK_CACHE) += blkcache.o > > > +endif > > > > Could this all get replaced by: > > > > obj-$(CONFIG_$(SPL_)BLOCK_CACHE) += blkcache.o > > > Nicely done. I am not that familiar with Makefiles and how to clean > that up, but it seems to work work this way at least for the AM3517 > EVM. > > > > diff --git a/include/blk.h b/include/blk.h > > > index fc0c239e46..c17c5eb047 100644 > > > --- a/include/blk.h > > > +++ b/include/blk.h > > > @@ -111,7 +111,8 @@ struct blk_desc { > > > #define PAD_TO_BLOCKSIZE(size, blk_desc) \ > > > (PAD_SIZE(size, blk_desc->blksz)) > > > > > > -#ifdef CONFIG_BLOCK_CACHE > > > +#if (defined(CONFIG_BLOCK_CACHE) && !defined(CONFIG_SPL_BUILD)) || \ > > > + (defined(CONFIG_SPL_BLOCK_CACHE) && defined(CONFIG_SPL_BUILD)) > > > /** > > > > Replace with CONFIG_IS_ENABLED? > > I tried replacing 'defined(x)' with 'CONFIG_IS_ENABLED(x)' and I got a > bunch of build errors. > The only way I could get it to work was using 'defined(x)' > You need to drop the CONFIG_ off the front of the symbol, something like: #if CONFIG_IS_ENABLED(BLK_CACHE) > adam > > > > > * blkcache_read() - attempt to read a set of blocks from cache > > > * > > > -- > > > 2.17.1 > > > > > > _______________________________________________ > > > U-Boot mailing list > > > U-Boot@lists.denx.de > > > https://lists.denx.de/listinfo/u-boot > > > > > > > > -- > > Alex Kiernan
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index 0792373cfc..8ef363b3d4 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -37,6 +37,13 @@ config BLOCK_CACHE it will prevent repeated reads from directory structures and other filesystem data structures. +config SPL_BLOCK_CACHE + bool "Use block device cache in SPL" + depends on BLOCK_CACHE && SPL_BLK + default n + help + This option enables the disk-block cache in SPL + config IDE bool "Support IDE controllers" select HAVE_BLOCK_DEVICE diff --git a/drivers/block/Makefile b/drivers/block/Makefile index 5fcafb193e..a9af28a552 100644 --- a/drivers/block/Makefile +++ b/drivers/block/Makefile @@ -11,4 +11,9 @@ endif obj-$(CONFIG_IDE) += ide.o obj-$(CONFIG_SANDBOX) += sandbox.o +ifdef CONFIG_SPL_BUILD +obj-$(SPL_BLOCK_CACHE) += blkcache.o +endif +ifndef CONFIG_SPL_BUILD obj-$(CONFIG_BLOCK_CACHE) += blkcache.o +endif diff --git a/include/blk.h b/include/blk.h index fc0c239e46..c17c5eb047 100644 --- a/include/blk.h +++ b/include/blk.h @@ -111,7 +111,8 @@ struct blk_desc { #define PAD_TO_BLOCKSIZE(size, blk_desc) \ (PAD_SIZE(size, blk_desc->blksz)) -#ifdef CONFIG_BLOCK_CACHE +#if (defined(CONFIG_BLOCK_CACHE) && !defined(CONFIG_SPL_BUILD)) || \ + (defined(CONFIG_SPL_BLOCK_CACHE) && defined(CONFIG_SPL_BUILD)) /** * blkcache_read() - attempt to read a set of blocks from cache *
When enabling BLOCK_CACHE on devices with limited RAM during SPL, some devices may not boot. This creates an option to enable block caching in SPL by defaults off. It is dependant on BLOCK_CACHE and SPL_BLK Fixes: 46960ad6d09b ("block: Have BLOCK_CACHE default to y in some cases") Signed-off-by: Adam Ford <aford173@gmail.com>