diff mbox series

[V8,10/17] qmp event: Add COLO_EXIT event to notify users while exited COLO

Message ID 20180603050546.6827-11-zhangckid@gmail.com
State New
Headers show
Series COLO: integrate colo frame with block replication and COLO proxy | expand

Commit Message

Zhang Chen June 3, 2018, 5:05 a.m. UTC 
From: zhanghailiang <zhang.zhanghailiang@huawei.com>

If some errors happen during VM's COLO FT stage, it's important to
notify the users of this event. Together with 'x-colo-lost-heartbeat',
Users can intervene in COLO's failover work immediately.
If users don't want to get involved in COLO's failover verdict,
it is still necessary to notify users that we exited COLO mode.

Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
---
 migration/colo.c    | 31 +++++++++++++++++++++++++++++++
 qapi/migration.json | 38 ++++++++++++++++++++++++++++++++++++++
 2 files changed, 69 insertions(+)

Comments

Eric Blake June 4, 2018, 10:23 p.m. UTC | #1 
On 06/03/2018 12:05 AM, Zhang Chen wrote:
> From: zhanghailiang <zhang.zhanghailiang@huawei.com>
> 
> If some errors happen during VM's COLO FT stage, it's important to
> notify the users of this event. Together with 'x-colo-lost-heartbeat',
> Users can intervene in COLO's failover work immediately.
> If users don't want to get involved in COLO's failover verdict,
> it is still necessary to notify users that we exited COLO mode.
> 
> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
> Signed-off-by: Zhang Chen <zhangckid@gmail.com>
> Reviewed-by: Eric Blake <eblake@redhat.com>
> ---
>   migration/colo.c    | 31 +++++++++++++++++++++++++++++++
>   qapi/migration.json | 38 ++++++++++++++++++++++++++++++++++++++
>   2 files changed, 69 insertions(+)
> 
> diff --git a/migration/colo.c b/migration/colo.c
> index c083d3696f..bedb677788 100644
> --- a/migration/colo.c

>   
> +    /*
> +     * There are only two reasons we can go here, some error happened.
> +     * Or the user triggered failover.

s/go here/get here/
s/happened. Or/happened, or/

> +++ b/qapi/migration.json
> @@ -880,6 +880,44 @@
>   { 'enum': 'FailoverStatus',
>     'data': [ 'none', 'require', 'active', 'completed', 'relaunch' ] }
>   
> +##
> +# @COLO_EXIT:
> +#
> +# Emitted when VM finishes COLO mode due to some errors happening or
> +# at the request of users.
> +#
> +# @mode: report COLO mode when COLO exited.
> +#
> +# @reason: describes the reason for the COLO exit.
> +#
> +# Since: 2.13

s/2.13/3.0/

> +#
> +# Example:
> +#
> +# <- { "timestamp": {"seconds": 2032141960, "microseconds": 417172},
> +#      "event": "COLO_EXIT", "data": {"mode": "primary", "reason": "request" } }
> +#
> +##
> +{ 'event': 'COLO_EXIT',
> +  'data': {'mode': 'COLOMode', 'reason': 'COLOExitReason' } }
> +
> +##
> +# @COLOExitReason:
> +#
> +# The reason for a COLO exit
> +#
> +# @none: no failover has ever happened, This can't occur in the COLO_EXIT event,

s/happened,/happened./

> +# only in the result of query-colo-status.
> +#
> +# @request: COLO exit is due to an external request
> +#
> +# @error: COLO exit is due to an internal error
> +#
> +# Since: 2.13

s/2.13/3.0/

> +##
> +{ 'enum': 'COLOExitReason',
> +  'data': [ 'none', 'request', 'error' ] }
> +
>   ##
>   # @x-colo-lost-heartbeat:
>   #
>
Markus Armbruster June 7, 2018, 12:54 p.m. UTC | #2 
Eric Blake <eblake@redhat.com> writes:

> On 06/03/2018 12:05 AM, Zhang Chen wrote:
>> From: zhanghailiang <zhang.zhanghailiang@huawei.com>
>>
>> If some errors happen during VM's COLO FT stage, it's important to
>> notify the users of this event. Together with 'x-colo-lost-heartbeat',
>> Users can intervene in COLO's failover work immediately.
>> If users don't want to get involved in COLO's failover verdict,
>> it is still necessary to notify users that we exited COLO mode.
>>
>> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
>> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
>> Signed-off-by: Zhang Chen <zhangckid@gmail.com>
>> Reviewed-by: Eric Blake <eblake@redhat.com>
>> ---
>>   migration/colo.c    | 31 +++++++++++++++++++++++++++++++
>>   qapi/migration.json | 38 ++++++++++++++++++++++++++++++++++++++
>>   2 files changed, 69 insertions(+)
>>
>> diff --git a/migration/colo.c b/migration/colo.c
>> index c083d3696f..bedb677788 100644
>> --- a/migration/colo.c
>
>>   +    /*
>> +     * There are only two reasons we can go here, some error happened.
>> +     * Or the user triggered failover.
>
> s/go here/get here/
> s/happened. Or/happened, or/
>
>> +++ b/qapi/migration.json
>> @@ -880,6 +880,44 @@
>>   { 'enum': 'FailoverStatus',
>>     'data': [ 'none', 'require', 'active', 'completed', 'relaunch' ] }
>> +##
>> +# @COLO_EXIT:
>> +#
>> +# Emitted when VM finishes COLO mode due to some errors happening or
>> +# at the request of users.
>> +#
>> +# @mode: report COLO mode when COLO exited.
>> +#
>> +# @reason: describes the reason for the COLO exit.
>> +#
>> +# Since: 2.13
>
> s/2.13/3.0/
>
>> +#
>> +# Example:
>> +#
>> +# <- { "timestamp": {"seconds": 2032141960, "microseconds": 417172},
>> +#      "event": "COLO_EXIT", "data": {"mode": "primary", "reason": "request" } }
>> +#
>> +##
>> +{ 'event': 'COLO_EXIT',
>> +  'data': {'mode': 'COLOMode', 'reason': 'COLOExitReason' } }
>> +
>> +##
>> +# @COLOExitReason:
>> +#
>> +# The reason for a COLO exit
>> +#
>> +# @none: no failover has ever happened, This can't occur in the COLO_EXIT event,
>
> s/happened,/happened./

While there, wrap the line around column 70, please.

>> +# only in the result of query-colo-status.
>> +#
>> +# @request: COLO exit is due to an external request
>> +#
>> +# @error: COLO exit is due to an internal error
>> +#
>> +# Since: 2.13
>
> s/2.13/3.0/
>
>> +##
>> +{ 'enum': 'COLOExitReason',
>> +  'data': [ 'none', 'request', 'error' ] }
>> +
>>   ##
>>   # @x-colo-lost-heartbeat:
>>   #
>>

With these touch-ups:
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Zhang Chen June 10, 2018, 5:24 p.m. UTC | #3 
On Thu, Jun 7, 2018 at 8:54 PM, Markus Armbruster <armbru@redhat.com> wrote:

> Eric Blake <eblake@redhat.com> writes:
>
> > On 06/03/2018 12:05 AM, Zhang Chen wrote:
> >> From: zhanghailiang <zhang.zhanghailiang@huawei.com>
> >>
> >> If some errors happen during VM's COLO FT stage, it's important to
> >> notify the users of this event. Together with 'x-colo-lost-heartbeat',
> >> Users can intervene in COLO's failover work immediately.
> >> If users don't want to get involved in COLO's failover verdict,
> >> it is still necessary to notify users that we exited COLO mode.
> >>
> >> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
> >> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
> >> Signed-off-by: Zhang Chen <zhangckid@gmail.com>
> >> Reviewed-by: Eric Blake <eblake@redhat.com>
> >> ---
> >>   migration/colo.c    | 31 +++++++++++++++++++++++++++++++
> >>   qapi/migration.json | 38 ++++++++++++++++++++++++++++++++++++++
> >>   2 files changed, 69 insertions(+)
> >>
> >> diff --git a/migration/colo.c b/migration/colo.c
> >> index c083d3696f..bedb677788 100644
> >> --- a/migration/colo.c
> >
> >>   +    /*
> >> +     * There are only two reasons we can go here, some error happened.
> >> +     * Or the user triggered failover.
> >
> > s/go here/get here/
> > s/happened. Or/happened, or/
> >
> >> +++ b/qapi/migration.json
> >> @@ -880,6 +880,44 @@
> >>   { 'enum': 'FailoverStatus',
> >>     'data': [ 'none', 'require', 'active', 'completed', 'relaunch' ] }
> >> +##
> >> +# @COLO_EXIT:
> >> +#
> >> +# Emitted when VM finishes COLO mode due to some errors happening or
> >> +# at the request of users.
> >> +#
> >> +# @mode: report COLO mode when COLO exited.
> >> +#
> >> +# @reason: describes the reason for the COLO exit.
> >> +#
> >> +# Since: 2.13
> >
> > s/2.13/3.0/
> >
> >> +#
> >> +# Example:
> >> +#
> >> +# <- { "timestamp": {"seconds": 2032141960, "microseconds": 417172},
> >> +#      "event": "COLO_EXIT", "data": {"mode": "primary", "reason":
> "request" } }
> >> +#
> >> +##
> >> +{ 'event': 'COLO_EXIT',
> >> +  'data': {'mode': 'COLOMode', 'reason': 'COLOExitReason' } }
> >> +
> >> +##
> >> +# @COLOExitReason:
> >> +#
> >> +# The reason for a COLO exit
> >> +#
> >> +# @none: no failover has ever happened, This can't occur in the
> COLO_EXIT event,
> >
> > s/happened,/happened./
>
> While there, wrap the line around column 70, please.
>
> >> +# only in the result of query-colo-status.
> >> +#
> >> +# @request: COLO exit is due to an external request
> >> +#
> >> +# @error: COLO exit is due to an internal error
> >> +#
> >> +# Since: 2.13
> >
> > s/2.13/3.0/
> >
> >> +##
> >> +{ 'enum': 'COLOExitReason',
> >> +  'data': [ 'none', 'request', 'error' ] }
> >> +
> >>   ##
> >>   # @x-colo-lost-heartbeat:
> >>   #
> >>
>
> With these touch-ups:
> Reviewed-by: Markus Armbruster <armbru@redhat.com>
>


I will fixed the typo and addressed comments in next version.
Thanks Markus and Eric.

Thanks
Zhang Chen
diff mbox series

Patch

diff --git a/migration/colo.c b/migration/colo.c
index c083d3696f..bedb677788 100644
--- a/migration/colo.c
+++ b/migration/colo.c
@@ -28,6 +28,7 @@ 
 #include "net/colo-compare.h"
 #include "net/colo.h"
 #include "block/block.h"
+#include "qapi/qapi-events-migration.h"
 
 static bool vmstate_loading;
 static Notifier packets_compare_notifier;
@@ -514,6 +515,23 @@  out:
         qemu_fclose(fb);
     }
 
+    /*
+     * There are only two reasons we can go here, some error happened.
+     * Or the user triggered failover.
+     */
+    switch (failover_get_state()) {
+    case FAILOVER_STATUS_NONE:
+        qapi_event_send_colo_exit(COLO_MODE_PRIMARY,
+                                  COLO_EXIT_REASON_ERROR, NULL);
+        break;
+    case FAILOVER_STATUS_REQUIRE:
+        qapi_event_send_colo_exit(COLO_MODE_PRIMARY,
+                                  COLO_EXIT_REASON_REQUEST, NULL);
+        break;
+    default:
+        abort();
+    }
+
     /* Hope this not to be too long to wait here */
     qemu_sem_wait(&s->colo_exit_sem);
     qemu_sem_destroy(&s->colo_exit_sem);
@@ -745,6 +763,19 @@  out:
         error_report_err(local_err);
     }
 
+    switch (failover_get_state()) {
+    case FAILOVER_STATUS_NONE:
+        qapi_event_send_colo_exit(COLO_MODE_SECONDARY,
+                                  COLO_EXIT_REASON_ERROR, NULL);
+        break;
+    case FAILOVER_STATUS_REQUIRE:
+        qapi_event_send_colo_exit(COLO_MODE_SECONDARY,
+                                  COLO_EXIT_REASON_REQUEST, NULL);
+        break;
+    default:
+        abort();
+    }
+
     if (fb) {
         qemu_fclose(fb);
     }
diff --git a/qapi/migration.json b/qapi/migration.json
index dc9cc85545..93136ce5a0 100644
--- a/qapi/migration.json
+++ b/qapi/migration.json
@@ -880,6 +880,44 @@ 
 { 'enum': 'FailoverStatus',
   'data': [ 'none', 'require', 'active', 'completed', 'relaunch' ] }
 
+##
+# @COLO_EXIT:
+#
+# Emitted when VM finishes COLO mode due to some errors happening or
+# at the request of users.
+#
+# @mode: report COLO mode when COLO exited.
+#
+# @reason: describes the reason for the COLO exit.
+#
+# Since: 2.13
+#
+# Example:
+#
+# <- { "timestamp": {"seconds": 2032141960, "microseconds": 417172},
+#      "event": "COLO_EXIT", "data": {"mode": "primary", "reason": "request" } }
+#
+##
+{ 'event': 'COLO_EXIT',
+  'data': {'mode': 'COLOMode', 'reason': 'COLOExitReason' } }
+
+##
+# @COLOExitReason:
+#
+# The reason for a COLO exit
+#
+# @none: no failover has ever happened, This can't occur in the COLO_EXIT event,
+# only in the result of query-colo-status.
+#
+# @request: COLO exit is due to an external request
+#
+# @error: COLO exit is due to an internal error
+#
+# Since: 2.13
+##
+{ 'enum': 'COLOExitReason',
+  'data': [ 'none', 'request', 'error' ] }
+
 ##
 # @x-colo-lost-heartbeat:
 #