diff mbox series

[net-next,3/5] qed*: Support other classification modes.

Message ID 20180524165453.11852-4-manish.chopra@cavium.com
State Accepted, archived
Delegated to: David Miller
Headers show
Series qed*: ethtool rx flow classification enhancements. | expand

Commit Message

Chopra, Manish May 24, 2018, 4:54 p.m. UTC 
Currently, driver supports flow classification to PF
receive queues based on TCP/UDP 4 tuples [src_ip, dst_ip,
src_port, dst_port] only.

This patch enables to configure different flow profiles
[For example - only UDP dest port or src_ip based] on the
adapter so that classification can be done according to
just those fields as well. Although, at a time just one
type of flow configuration is supported due to limited
number of flow profiles available on the device.

For example -

ethtool -N enp7s0f0 flow-type udp4 dst-port 45762 action 2
ethtool -N enp7s0f0 flow-type tcp4 src-ip 192.16.4.10 action 1
ethtool -N enp7s0f0 flow-type udp6 dst-port 45762 action 3

Signed-off-by: Manish Chopra <manish.chopra@cavium.com>
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
---
 drivers/net/ethernet/qlogic/qed/qed_l2.c       |  2 ++
 drivers/net/ethernet/qlogic/qede/qede_filter.c | 31 ++++++++++++++++++++++++--
 include/linux/qed/qed_eth_if.h                 |  1 +
 3 files changed, 32 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/qlogic/qed/qed_l2.c b/drivers/net/ethernet/qlogic/qed/qed_l2.c
index 5e655c3..3cb8a80 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_l2.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_l2.c
@@ -1973,6 +1973,8 @@  void qed_reset_vport_stats(struct qed_dev *cdev)
 		return GFT_PROFILE_TYPE_4_TUPLE;
 	if (mode == QED_FILTER_CONFIG_MODE_IP_DEST)
 		return GFT_PROFILE_TYPE_IP_DST_ADDR;
+	if (mode == QED_FILTER_CONFIG_MODE_IP_SRC)
+		return GFT_PROFILE_TYPE_IP_SRC_ADDR;
 	return GFT_PROFILE_TYPE_L4_DST_PORT;
 }
 
diff --git a/drivers/net/ethernet/qlogic/qede/qede_filter.c b/drivers/net/ethernet/qlogic/qede/qede_filter.c
index 43ed420..9b84f0c 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_filter.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_filter.c
@@ -1623,9 +1623,17 @@  static int qede_flow_spec_to_tuple_ipv4_common(struct qede_dev *edev,
 	t->src_port = fs->h_u.tcp_ip4_spec.psrc;
 	t->dst_port = fs->h_u.tcp_ip4_spec.pdst;
 
-	/* We must have a valid 4-tuple */
+	/* We must either have a valid 4-tuple or only dst port
+	 * or only src ip as an input
+	 */
 	if (t->src_port && t->dst_port && t->src_ipv4 && t->dst_ipv4) {
 		t->mode = QED_FILTER_CONFIG_MODE_5_TUPLE;
+	} else if (!t->src_port && t->dst_port &&
+		   !t->src_ipv4 && !t->dst_ipv4) {
+		t->mode = QED_FILTER_CONFIG_MODE_L4_PORT;
+	}  else if (!t->src_port && !t->dst_port &&
+		    !t->dst_ipv4 && t->src_ipv4) {
+		t->mode = QED_FILTER_CONFIG_MODE_IP_SRC;
 	} else {
 		DP_INFO(edev, "Invalid N-tuple\n");
 		return -EOPNOTSUPP;
@@ -1697,11 +1705,21 @@  static int qede_flow_spec_to_tuple_ipv6_common(struct qede_dev *edev,
 	t->src_port = fs->h_u.tcp_ip6_spec.psrc;
 	t->dst_port = fs->h_u.tcp_ip6_spec.pdst;
 
-	/* We must make sure we have a valid 4-tuple */
+	/* We must make sure we have a valid 4-tuple or only dest port
+	 * or only src ip as an input
+	 */
 	if (t->src_port && t->dst_port &&
 	    memcmp(&t->src_ipv6, p, sizeof(struct in6_addr)) &&
 	    memcmp(&t->dst_ipv6, p, sizeof(struct in6_addr))) {
 		t->mode = QED_FILTER_CONFIG_MODE_5_TUPLE;
+	} else if (!t->src_port && t->dst_port &&
+		   !memcmp(&t->src_ipv6, p, sizeof(struct in6_addr)) &&
+		   !memcmp(&t->dst_ipv6, p, sizeof(struct in6_addr))) {
+		t->mode = QED_FILTER_CONFIG_MODE_L4_PORT;
+	} else if (!t->src_port && !t->dst_port &&
+		   !memcmp(&t->dst_ipv6, p, sizeof(struct in6_addr)) &&
+		   memcmp(&t->src_ipv6, p, sizeof(struct in6_addr))) {
+		t->mode = QED_FILTER_CONFIG_MODE_IP_SRC;
 	} else {
 		DP_INFO(edev, "Invalid N-tuple\n");
 		return -EOPNOTSUPP;
@@ -1779,6 +1797,15 @@  static int qede_flow_spec_validate(struct qede_dev *edev,
 		return -EINVAL;
 	}
 
+	/* Check if the filtering-mode could support the filter */
+	if (edev->arfs->filter_count &&
+	    edev->arfs->mode != t->mode) {
+		DP_INFO(edev,
+			"flow_spec would require filtering mode %08x, but %08x is configured\n",
+			t->mode, edev->arfs->filter_count);
+		return -EINVAL;
+	}
+
 	if (fs->ring_cookie >= QEDE_RSS_COUNT(edev)) {
 		DP_INFO(edev, "Queue out-of-bounds\n");
 		return -EINVAL;
diff --git a/include/linux/qed/qed_eth_if.h b/include/linux/qed/qed_eth_if.h
index 7f9756f..557e86e1 100644
--- a/include/linux/qed/qed_eth_if.h
+++ b/include/linux/qed/qed_eth_if.h
@@ -66,6 +66,7 @@  enum qed_filter_config_mode {
 	QED_FILTER_CONFIG_MODE_5_TUPLE,
 	QED_FILTER_CONFIG_MODE_L4_PORT,
 	QED_FILTER_CONFIG_MODE_IP_DEST,
+	QED_FILTER_CONFIG_MODE_IP_SRC,
 };
 
 struct qed_ntuple_filter_params {