diff mbox series

[U-Boot,1/3] board: Kconfig: Re-Arrangement of PPA firmware and header addresses

Message ID 1527053611-26970-1-git-send-email-Bhaskar.Upadhaya@nxp.com
State Accepted
Commit 7191d453489f426942f52c3704575f7b4c6ed1dc
Delegated to: York Sun
Headers show
Series [U-Boot,1/3] board: Kconfig: Re-Arrangement of PPA firmware and header addresses | expand

Commit Message

Bhaskar Upadhaya May 23, 2018, 5:33 a.m. UTC 
ppa firmware and header address may vary depending upon different boards,
configure ppa firmware and header address in board specific kconfig

Signed-off-by: Vinitha V Pillai <vinitha.pillai@nxp.com>
Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com>
Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
---
 arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 34 -------------------------------
 board/freescale/ls1012afrdm/Kconfig       |  4 ++++
 board/freescale/ls1012aqds/Kconfig        |  3 +++
 board/freescale/ls1012ardb/Kconfig        | 14 +++++++++++++
 board/freescale/ls1043aqds/Kconfig        | 16 +++++++++++++++
 board/freescale/ls1043ardb/Kconfig        | 14 +++++++++++++
 board/freescale/ls1046aqds/Kconfig        | 16 +++++++++++++++
 board/freescale/ls1046ardb/Kconfig        | 15 ++++++++++++++
 board/freescale/ls1088a/Kconfig           | 28 +++++++++++++++++++++++++
 board/freescale/ls2080aqds/Kconfig        | 16 +++++++++++++++
 board/freescale/ls2080ardb/Kconfig        | 31 ++++++++++++++--------------
 11 files changed, 141 insertions(+), 50 deletions(-)

Comments

York Sun May 29, 2018, 6 p.m. UTC | #1 
On 05/23/2018 03:15 AM, Bhaskar Upadhaya wrote:
> ppa firmware and header address may vary depending upon different boards,
> configure ppa firmware and header address in board specific kconfig
> 
> Signed-off-by: Vinitha V Pillai <vinitha.pillai@nxp.com>
> Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com>
> Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
> ---
>  arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 34 -------------------------------
>  board/freescale/ls1012afrdm/Kconfig       |  4 ++++
>  board/freescale/ls1012aqds/Kconfig        |  3 +++
>  board/freescale/ls1012ardb/Kconfig        | 14 +++++++++++++
>  board/freescale/ls1043aqds/Kconfig        | 16 +++++++++++++++
>  board/freescale/ls1043ardb/Kconfig        | 14 +++++++++++++
>  board/freescale/ls1046aqds/Kconfig        | 16 +++++++++++++++
>  board/freescale/ls1046ardb/Kconfig        | 15 ++++++++++++++
>  board/freescale/ls1088a/Kconfig           | 28 +++++++++++++++++++++++++
>  board/freescale/ls2080aqds/Kconfig        | 16 +++++++++++++++
>  board/freescale/ls2080ardb/Kconfig        | 31 ++++++++++++++--------------
>  11 files changed, 141 insertions(+), 50 deletions(-)
> 

I guess this one supersedes http://patchwork.ozlabs.org/patch/908676/,
doesn't it? It would be nice to update the patch version, instead of
sending a new one.

York
York Sun June 8, 2018, 11:45 p.m. UTC | #2 
On 05/23/2018 03:15 AM, Bhaskar Upadhaya wrote:
> ppa firmware and header address may vary depending upon different boards,
> configure ppa firmware and header address in board specific kconfig
> 
> Signed-off-by: Vinitha V Pillai <vinitha.pillai@nxp.com>
> Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com>
> Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
> ---


Applied to u-boot-fsl-qoriq master. Awaiting upstream.
Thanks.

York
diff mbox series

Patch

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index 546de33..f2111fa 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -261,40 +261,6 @@  config SYS_LS_PPA_FW_IN_NAND
 
 endchoice
 
-config SYS_LS_PPA_FW_ADDR
-	hex "Address of PPA firmware loading from"
-	depends on FSL_LS_PPA
-	default 0x20400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT && ARCH_LS2080A
-	default 0x40400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT
-	default 0x580400000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS2080A
-	default 0x20400000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1088A
-	default 0x60400000 if SYS_LS_PPA_FW_IN_XIP
-	default 0x400000 if SYS_LS_PPA_FW_IN_MMC
-	default 0x400000 if SYS_LS_PPA_FW_IN_NAND
-
-	help
-	  If the PPA firmware locate at XIP flash, such as NOR or
-	  QSPI flash, this address is a directly memory-mapped.
-	  If it is in a serial accessed flash, such as NAND and SD
-	  card, it is a byte offset.
-
-config SYS_LS_PPA_ESBC_ADDR
-	hex "hdr address of PPA firmware loading from"
-	depends on FSL_LS_PPA && CHAIN_OF_TRUST
-	default 0x60680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1043A
-	default 0x40680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1046A
-	default 0x40680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1012A
-	default 0x20680000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT && ARCH_LS2080A
-	default 0x580680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS2080A
-	default 0x20680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1088A
-	default 0x680000 if SYS_LS_PPA_FW_IN_MMC
-	default 0x680000 if SYS_LS_PPA_FW_IN_NAND
-	help
-	  If the PPA header firmware locate at XIP flash, such as NOR or
-	  QSPI flash, this address is a directly memory-mapped.
-	  If it is in a serial accessed flash, such as NAND and SD
-	  card, it is a byte offset.
-
 config LS_PPA_ESBC_HDR_SIZE
 	hex "Length of PPA ESBC header"
 	depends on FSL_LS_PPA && CHAIN_OF_TRUST && !SYS_LS_PPA_FW_IN_XIP
diff --git a/board/freescale/ls1012afrdm/Kconfig b/board/freescale/ls1012afrdm/Kconfig
index 22d521b..fd33807 100644
--- a/board/freescale/ls1012afrdm/Kconfig
+++ b/board/freescale/ls1012afrdm/Kconfig
@@ -12,6 +12,10 @@  config SYS_SOC
 config SYS_CONFIG_NAME
 	default "ls1012afrdm"
 
+config SYS_LS_PPA_FW_ADDR
+	hex "PPA Firmware Addr"
+	default 0x40400000
+
 if FSL_PFE
 
 config BOARD_SPECIFIC_OPTIONS # dummy
diff --git a/board/freescale/ls1012aqds/Kconfig b/board/freescale/ls1012aqds/Kconfig
index c0b12ed..b702fb2 100644
--- a/board/freescale/ls1012aqds/Kconfig
+++ b/board/freescale/ls1012aqds/Kconfig
@@ -12,6 +12,9 @@  config SYS_SOC
 config SYS_CONFIG_NAME
 	default "ls1012aqds"
 
+config SYS_LS_PPA_FW_ADDR
+        hex "PPA Firmware Addr"
+        default 0x40400000
 
 if FSL_PFE
 
diff --git a/board/freescale/ls1012ardb/Kconfig b/board/freescale/ls1012ardb/Kconfig
index 493d477..4cd66bd 100644
--- a/board/freescale/ls1012ardb/Kconfig
+++ b/board/freescale/ls1012ardb/Kconfig
@@ -12,6 +12,16 @@  config SYS_SOC
 config SYS_CONFIG_NAME
 	default "ls1012ardb"
 
+config SYS_LS_PPA_FW_ADDR
+        hex "PPA Firmware Addr"
+        default 0x40400000
+
+if CHAIN_OF_TRUST
+config SYS_LS_PPA_ESBC_ADDR
+	hex "PPA Firmware HDR Addr"
+	default 0x40680000
+endif
+
 if FSL_PFE
 
 config BOARD_SPECIFIC_OPTIONS # dummy
@@ -59,6 +69,10 @@  config SYS_SOC
 config SYS_CONFIG_NAME
         default "ls1012a2g5rdb"
 
+config SYS_LS_PPA_FW_ADDR
+        hex "PPA Firmware Addr"
+        default 0x40400000
+
 if FSL_PFE
 
 config BOARD_SPECIFIC_OPTIONS # dummy
diff --git a/board/freescale/ls1043aqds/Kconfig b/board/freescale/ls1043aqds/Kconfig
index 95d2888..182900e 100644
--- a/board/freescale/ls1043aqds/Kconfig
+++ b/board/freescale/ls1043aqds/Kconfig
@@ -12,6 +12,22 @@  config SYS_SOC
 config SYS_CONFIG_NAME
 	default "ls1043aqds"
 
+if FSL_LS_PPA
+config SYS_LS_PPA_FW_ADDR
+	hex "PPA Firmware Addr"
+	default 0x40400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT
+	default 0x60400000 if SYS_LS_PPA_FW_IN_XIP
+	default 0x400000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND
+
+if CHAIN_OF_TRUST
+config SYS_LS_PPA_ESBC_ADDR
+	hex "PPA Firmware HDR Addr"
+	default 0x40680000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT
+	default 0x60680000 if SYS_LS_PPA_FW_IN_XIP
+	default 0x680000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND
+endif
+endif
+
 source "board/freescale/common/Kconfig"
 
 endif
diff --git a/board/freescale/ls1043ardb/Kconfig b/board/freescale/ls1043ardb/Kconfig
index 1bab7ca..3d9e295 100644
--- a/board/freescale/ls1043ardb/Kconfig
+++ b/board/freescale/ls1043ardb/Kconfig
@@ -22,6 +22,20 @@  config SYS_HAS_ARMV8_SECURE_BASE
 	  If enabled, please also define the value for ARMV8_SECURE_BASE,
 	  for LS1043ARDB, it could be some address in OCRAM.
 
+if FSL_LS_PPA
+config SYS_LS_PPA_FW_ADDR
+	hex "PPA Firmware Addr"
+	default 0x60400000 if SYS_LS_PPA_FW_IN_XIP
+	default 0x400000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND
+
+if CHAIN_OF_TRUST
+config SYS_LS_PPA_ESBC_ADDR
+	hex "PPA Firmware HDR Addr"
+	default 0x60680000 if SYS_LS_PPA_FW_IN_XIP
+	default 0x680000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND
+endif
+endif
+
 source "board/freescale/common/Kconfig"
 
 endif
diff --git a/board/freescale/ls1046aqds/Kconfig b/board/freescale/ls1046aqds/Kconfig
index 070827d..1616dcc 100644
--- a/board/freescale/ls1046aqds/Kconfig
+++ b/board/freescale/ls1046aqds/Kconfig
@@ -12,6 +12,22 @@  config SYS_SOC
 config SYS_CONFIG_NAME
 	default "ls1046aqds"
 
+if FSL_LS_PPA
+config SYS_LS_PPA_FW_ADDR
+	hex "PPA Firmware Addr"
+	default 0x40400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT
+	default 0x60400000 if SYS_LS_PPA_FW_IN_XIP
+	default 0x400000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND
+
+if CHAIN_OF_TRUST
+config SYS_LS_PPA_ESBC_ADDR
+	hex "PPA Firmware HDR Addr"
+	default 0x40680000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT
+	default 0x60680000 if SYS_LS_PPA_FW_IN_XIP
+	default 0x680000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND
+endif
+endif
+
 source "board/freescale/common/Kconfig"
 
 endif
diff --git a/board/freescale/ls1046ardb/Kconfig b/board/freescale/ls1046ardb/Kconfig
index b9f2ed7..4c31e0e 100644
--- a/board/freescale/ls1046ardb/Kconfig
+++ b/board/freescale/ls1046ardb/Kconfig
@@ -12,5 +12,20 @@  config SYS_SOC
 
 config SYS_CONFIG_NAME
 	default "ls1046ardb"
+
+if FSL_LS_PPA
+config SYS_LS_PPA_FW_ADDR
+	hex "PPA Firmware Addr"
+	default 0x40400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT
+	default 0x400000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND
+
+if CHAIN_OF_TRUST
+config SYS_LS_PPA_ESBC_ADDR
+	hex "PPA Firmware HDR Addr"
+	default 0x40680000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT
+	default 0x680000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND
+endif
+endif
+
 source "board/freescale/common/Kconfig"
 endif
diff --git a/board/freescale/ls1088a/Kconfig b/board/freescale/ls1088a/Kconfig
index 4479dd0..8bb828e 100644
--- a/board/freescale/ls1088a/Kconfig
+++ b/board/freescale/ls1088a/Kconfig
@@ -12,6 +12,20 @@  config SYS_SOC
 config SYS_CONFIG_NAME
 	default "ls1088aqds"
 
+if FSL_LS_PPA
+config SYS_LS_PPA_FW_ADDR
+        hex "PPA Firmware Addr"
+	default 0x20400000 if SYS_LS_PPA_FW_IN_XIP
+	default 0x400000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND
+
+if CHAIN_OF_TRUST
+config SYS_LS_PPA_ESBC_ADDR
+	hex "PPA Firmware HDR Addr"
+	default 0x20680000 if SYS_LS_PPA_FW_IN_XIP
+	default 0x680000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND
+endif
+endif
+
 source "board/freescale/common/Kconfig"
 endif
 
@@ -29,5 +43,19 @@  config SYS_SOC
 config SYS_CONFIG_NAME
 	default "ls1088ardb"
 
+if FSL_LS_PPA
+config SYS_LS_PPA_FW_ADDR
+        hex "PPA Firmware Addr"
+	default 0x20400000 if SYS_LS_PPA_FW_IN_XIP
+	default 0x400000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND
+
+if CHAIN_OF_TRUST
+config SYS_LS_PPA_ESBC_ADDR
+	hex "PPA Firmware HDR Addr"
+	default 0x20680000 if SYS_LS_PPA_FW_IN_XIP
+	default 0x680000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND
+endif
+endif
+
 source "board/freescale/common/Kconfig"
 endif
diff --git a/board/freescale/ls2080aqds/Kconfig b/board/freescale/ls2080aqds/Kconfig
index e2b2c8d..6b2b645 100644
--- a/board/freescale/ls2080aqds/Kconfig
+++ b/board/freescale/ls2080aqds/Kconfig
@@ -13,6 +13,22 @@  config SYS_SOC
 config SYS_CONFIG_NAME
 	default "ls2080aqds"
 
+if FSL_LS_PPA
+config SYS_LS_PPA_FW_ADDR
+	hex "PPA Firmware Addr"
+	default 0x20400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT
+	default 0x580400000 if SYS_LS_PPA_FW_IN_XIP
+	default 0x400000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND
+
+if CHAIN_OF_TRUST
+config SYS_LS_PPA_ESBC_ADDR
+	hex "PPA Firmware HDR Addr"
+	default 0x20680000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT
+	default 0x580680000 if SYS_LS_PPA_FW_IN_XIP
+	default 0x680000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND
+endif
+endif
+
 source "board/freescale/common/Kconfig"
 
 endif
diff --git a/board/freescale/ls2080ardb/Kconfig b/board/freescale/ls2080ardb/Kconfig
index 8f64642..678d582 100644
--- a/board/freescale/ls2080ardb/Kconfig
+++ b/board/freescale/ls2080ardb/Kconfig
@@ -1,5 +1,4 @@ 
-
-if TARGET_LS2080ARDB
+if TARGET_LS2080ARDB || TARGET_LS2081ARDB
 
 config SYS_BOARD
 	default "ls2080ardb"
@@ -15,21 +14,21 @@  config SYS_CONFIG_NAME
 
 source "board/freescale/common/Kconfig"
 
+if FSL_LS_PPA
+config SYS_LS_PPA_FW_ADDR
+	hex "PPA Firmware Addr"
+	default 0x20400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT
+	default 0x580400000 if SYS_LS_PPA_FW_IN_XIP
+	default 0x400000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND
+
+if CHAIN_OF_TRUST
+config SYS_LS_PPA_ESBC_ADDR
+	hex "PPA Firmware HDR Addr"
+	default 0x20680000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT
+	default 0x580680000 if SYS_LS_PPA_FW_IN_XIP
+	default 0x680000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND
+endif
 endif
-
-if TARGET_LS2081ARDB
-
-config SYS_BOARD
-	default "ls2080ardb"
-
-config SYS_VENDOR
-	default "freescale"
-
-config SYS_SOC
-	default "fsl-layerscape"
-
-config SYS_CONFIG_NAME
-	default "ls2080ardb"
 
 source "board/freescale/common/Kconfig"