diff mbox series

[net-next,v2,2/3] net: phy: sfp: make the i2c-bus dt property mandatory

Message ID 20180522101801.18947-3-antoine.tenart@bootlin.com
State Accepted, archived
Delegated to: David Miller
Headers show
Series net: sfp: small improvements | expand

Commit Message

Antoine Tenart May 22, 2018, 10:18 a.m. UTC 
This patch makes the i2c-bus property mandatory when using a device
tree. If the sfp i2c bus isn't described it's impossible to guess the
protocol to use for a given module, and the sfp module would then not
work in most cases.

Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
---
 drivers/net/phy/sfp.c | 28 +++++++++++++++-------------
 1 file changed, 15 insertions(+), 13 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c
index a91d12209a81..c4c92db86dfa 100644
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -976,6 +976,7 @@  static int sfp_probe(struct platform_device *pdev)
 	if (pdev->dev.of_node) {
 		struct device_node *node = pdev->dev.of_node;
 		const struct of_device_id *id;
+		struct i2c_adapter *i2c;
 		struct device_node *np;
 
 		id = of_match_node(sfp_of_match, node);
@@ -985,19 +986,20 @@  static int sfp_probe(struct platform_device *pdev)
 		sff = sfp->type = id->data;
 
 		np = of_parse_phandle(node, "i2c-bus", 0);
-		if (np) {
-			struct i2c_adapter *i2c;
-
-			i2c = of_find_i2c_adapter_by_node(np);
-			of_node_put(np);
-			if (!i2c)
-				return -EPROBE_DEFER;
-
-			err = sfp_i2c_configure(sfp, i2c);
-			if (err < 0) {
-				i2c_put_adapter(i2c);
-				return err;
-			}
+		if (!np) {
+			dev_err(sfp->dev, "missing 'i2c-bus' property\n");
+			return -ENODEV;
+		}
+
+		i2c = of_find_i2c_adapter_by_node(np);
+		of_node_put(np);
+		if (!i2c)
+			return -EPROBE_DEFER;
+
+		err = sfp_i2c_configure(sfp, i2c);
+		if (err < 0) {
+			i2c_put_adapter(i2c);
+			return err;
 		}
 	}