diff mbox series

[U-Boot,v1,3/6] board: Add support for KEY1 status detection on K+P's HSC|DDC boards

Message ID 20180520063319.21828-4-lukma@denx.de
State Accepted
Commit 0b35b2d11774fadd48b9492bacd89a9757965ecc
Delegated to: Stefano Babic
Headers show
Series board: k+p: Minor adjustments for K+P imx53 boards | expand

Commit Message

Lukasz Majewski May 20, 2018, 6:33 a.m. UTC 
This code provides information if the K+P's imx53 boards had KEY1
pressed.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
---

 arch/arm/dts/imx53-kp.dts     |  2 ++
 board/k+p/kp_imx53/kp_imx53.c | 14 ++++++++++++++
 2 files changed, 16 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/dts/imx53-kp.dts b/arch/arm/dts/imx53-kp.dts
index 6322ef1323..ca98fb59c6 100644
--- a/arch/arm/dts/imx53-kp.dts
+++ b/arch/arm/dts/imx53-kp.dts
@@ -88,6 +88,8 @@ 
 				MX53_PAD_EIM_CS0__GPIO2_23 0x1e4
 				/* LCD BACKLIGHT */
 				MX53_PAD_GPIO_1__GPIO1_1 0x1e4
+				/* KEY1 GPIO */
+				MX53_PAD_EIM_RW__GPIO2_26 0x1e4
 			>;
 		};
 
diff --git a/board/k+p/kp_imx53/kp_imx53.c b/board/k+p/kp_imx53/kp_imx53.c
index 6b0db6b8de..7e947fb617 100644
--- a/board/k+p/kp_imx53/kp_imx53.c
+++ b/board/k+p/kp_imx53/kp_imx53.c
@@ -23,6 +23,7 @@ 
 #define PHY_nRST IMX_GPIO_NR(7, 6)
 #define BOOSTER_OFF IMX_GPIO_NR(2, 23)
 #define LCD_BACKLIGHT IMX_GPIO_NR(1, 1)
+#define KEY1 IMX_GPIO_NR(2, 26)
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -196,6 +197,17 @@  void board_disable_display(void)
 	gpio_direction_output(LCD_BACKLIGHT, 0);
 }
 
+void board_misc_setup(void)
+{
+	gpio_request(KEY1, "KEY1_GPIO");
+	gpio_direction_input(KEY1);
+
+	if (gpio_get_value(KEY1))
+		env_set("key1", "off");
+	else
+		env_set("key1", "on");
+}
+
 int board_late_init(void)
 {
 	int ret = 0;
@@ -215,5 +227,7 @@  int board_late_init(void)
 	show_eeprom();
 	read_board_id();
 
+	board_misc_setup();
+
 	return ret;
 }