diff mbox series

PCI: Remove host driver Kconfig selection of CONFIG_PCIEPORTBUS

Message ID 152668266782.118010.15462515170612275250.stgit@bhelgaas-glaptop.roam.corp.google.com
State Accepted
Delegated to: Bjorn Helgaas
Headers show
Series PCI: Remove host driver Kconfig selection of CONFIG_PCIEPORTBUS | expand

Commit Message

Bjorn Helgaas May 18, 2018, 10:31 p.m. UTC
From: Bjorn Helgaas <bhelgaas@google.com>

Host bridge drivers do not use the portdrv interfaces (struct pcie_device,
struct pcie_port_service_driver, pcie_port_service_register(), etc), and
they should not select CONFIG_PCIEPORTBUS.

If users need the portdrv services, they can select CONFIG_PCIEPORTBUS just
like all other PCI users.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
---
 drivers/pci/dwc/Kconfig  |   10 ----------
 drivers/pci/host/Kconfig |    2 --
 2 files changed, 12 deletions(-)

Comments

Bjorn Helgaas May 30, 2018, 4:45 p.m. UTC | #1
On Fri, May 18, 2018 at 05:31:07PM -0500, Bjorn Helgaas wrote:
> From: Bjorn Helgaas <bhelgaas@google.com>
> 
> Host bridge drivers do not use the portdrv interfaces (struct pcie_device,
> struct pcie_port_service_driver, pcie_port_service_register(), etc), and
> they should not select CONFIG_PCIEPORTBUS.
> 
> If users need the portdrv services, they can select CONFIG_PCIEPORTBUS just
> like all other PCI users.
> 
> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

I applied this to pci/kconfig for v4.18.

> ---
>  drivers/pci/dwc/Kconfig  |   10 ----------
>  drivers/pci/host/Kconfig |    2 --
>  2 files changed, 12 deletions(-)
> 
> diff --git a/drivers/pci/dwc/Kconfig b/drivers/pci/dwc/Kconfig
> index 2f3f5c50aa48..678390a77ba1 100644
> --- a/drivers/pci/dwc/Kconfig
> +++ b/drivers/pci/dwc/Kconfig
> @@ -68,7 +68,6 @@ config PCI_EXYNOS
>  	depends on PCI
>  	depends on SOC_EXYNOS5440
>  	depends on PCI_MSI_IRQ_DOMAIN
> -	select PCIEPORTBUS
>  	select PCIE_DW_HOST
>  
>  config PCI_IMX6
> @@ -76,7 +75,6 @@ config PCI_IMX6
>  	depends on PCI
>  	depends on SOC_IMX6Q
>  	depends on PCI_MSI_IRQ_DOMAIN
> -	select PCIEPORTBUS
>  	select PCIE_DW_HOST
>  
>  config PCIE_SPEAR13XX
> @@ -84,7 +82,6 @@ config PCIE_SPEAR13XX
>  	depends on PCI
>  	depends on ARCH_SPEAR13XX
>  	depends on PCI_MSI_IRQ_DOMAIN
> -	select PCIEPORTBUS
>  	select PCIE_DW_HOST
>  	help
>  	  Say Y here if you want PCIe support on SPEAr13XX SoCs.
> @@ -94,7 +91,6 @@ config PCI_KEYSTONE
>  	depends on PCI
>  	depends on ARCH_KEYSTONE
>  	depends on PCI_MSI_IRQ_DOMAIN
> -	select PCIEPORTBUS
>  	select PCIE_DW_HOST
>  	help
>  	  Say Y here if you want to enable PCI controller support on Keystone
> @@ -117,7 +113,6 @@ config PCI_HISI
>  	bool "HiSilicon Hip05 and Hip06 SoCs PCIe controllers"
>  	depends on PCI
>  	depends on PCI_MSI_IRQ_DOMAIN
> -	select PCIEPORTBUS
>  	select PCIE_DW_HOST
>  	select PCI_HOST_COMMON
>  	help
> @@ -129,7 +124,6 @@ config PCIE_QCOM
>  	depends on PCI
>  	depends on ARCH_QCOM && OF
>  	depends on PCI_MSI_IRQ_DOMAIN
> -	select PCIEPORTBUS
>  	select PCIE_DW_HOST
>  	help
>  	  Say Y here to enable PCIe controller support on Qualcomm SoCs. The
> @@ -141,7 +135,6 @@ config PCIE_ARMADA_8K
>  	depends on PCI
>  	depends on ARCH_MVEBU
>  	depends on PCI_MSI_IRQ_DOMAIN
> -	select PCIEPORTBUS
>  	select PCIE_DW_HOST
>  	help
>  	  Say Y here if you want to enable PCIe controller support on
> @@ -156,7 +149,6 @@ config PCIE_ARTPEC6_HOST
>  	bool "Axis ARTPEC-6 PCIe controller Host Mode"
>  	depends on MACH_ARTPEC6
>  	depends on PCI && PCI_MSI_IRQ_DOMAIN
> -	select PCIEPORTBUS
>  	select PCIE_DW_HOST
>  	select PCIE_ARTPEC6
>  	help
> @@ -178,7 +170,6 @@ config PCIE_KIRIN
>  	bool "HiSilicon Kirin series SoCs PCIe controllers"
>  	depends on PCI_MSI_IRQ_DOMAIN
>  	depends on PCI
> -	select PCIEPORTBUS
>  	select PCIE_DW_HOST
>  	help
>  	  Say Y here if you want PCIe controller support
> @@ -189,7 +180,6 @@ config PCIE_HISI_STB
>  	depends on ARCH_HISI
>  	depends on PCI
>  	depends on PCI_MSI_IRQ_DOMAIN
> -	select PCIEPORTBUS
>  	select PCIE_DW_HOST
>  	help
>            Say Y here if you want PCIe controller support on HiSilicon STB SoCs
> diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
> index 0d0177ce436c..90f0cc9dfd95 100644
> --- a/drivers/pci/host/Kconfig
> +++ b/drivers/pci/host/Kconfig
> @@ -83,7 +83,6 @@ config PCI_XGENE
>  	bool "X-Gene PCIe controller"
>  	depends on ARM64
>  	depends on OF || (ACPI && PCI_QUIRKS)
> -	select PCIEPORTBUS
>  	help
>  	  Say Y here if you want internal PCI support on APM X-Gene SoC.
>  	  There are 5 internal PCIe ports available. Each port is GEN3 capable
> @@ -194,7 +193,6 @@ config PCIE_MEDIATEK
>  	depends on (ARM || ARM64) && (ARCH_MEDIATEK || COMPILE_TEST)
>  	depends on OF
>  	depends on PCI
> -	select PCIEPORTBUS
>  	help
>  	  Say Y here if you want to enable PCIe controller support on
>  	  MediaTek SoCs.
>
diff mbox series

Patch

diff --git a/drivers/pci/dwc/Kconfig b/drivers/pci/dwc/Kconfig
index 2f3f5c50aa48..678390a77ba1 100644
--- a/drivers/pci/dwc/Kconfig
+++ b/drivers/pci/dwc/Kconfig
@@ -68,7 +68,6 @@  config PCI_EXYNOS
 	depends on PCI
 	depends on SOC_EXYNOS5440
 	depends on PCI_MSI_IRQ_DOMAIN
-	select PCIEPORTBUS
 	select PCIE_DW_HOST
 
 config PCI_IMX6
@@ -76,7 +75,6 @@  config PCI_IMX6
 	depends on PCI
 	depends on SOC_IMX6Q
 	depends on PCI_MSI_IRQ_DOMAIN
-	select PCIEPORTBUS
 	select PCIE_DW_HOST
 
 config PCIE_SPEAR13XX
@@ -84,7 +82,6 @@  config PCIE_SPEAR13XX
 	depends on PCI
 	depends on ARCH_SPEAR13XX
 	depends on PCI_MSI_IRQ_DOMAIN
-	select PCIEPORTBUS
 	select PCIE_DW_HOST
 	help
 	  Say Y here if you want PCIe support on SPEAr13XX SoCs.
@@ -94,7 +91,6 @@  config PCI_KEYSTONE
 	depends on PCI
 	depends on ARCH_KEYSTONE
 	depends on PCI_MSI_IRQ_DOMAIN
-	select PCIEPORTBUS
 	select PCIE_DW_HOST
 	help
 	  Say Y here if you want to enable PCI controller support on Keystone
@@ -117,7 +113,6 @@  config PCI_HISI
 	bool "HiSilicon Hip05 and Hip06 SoCs PCIe controllers"
 	depends on PCI
 	depends on PCI_MSI_IRQ_DOMAIN
-	select PCIEPORTBUS
 	select PCIE_DW_HOST
 	select PCI_HOST_COMMON
 	help
@@ -129,7 +124,6 @@  config PCIE_QCOM
 	depends on PCI
 	depends on ARCH_QCOM && OF
 	depends on PCI_MSI_IRQ_DOMAIN
-	select PCIEPORTBUS
 	select PCIE_DW_HOST
 	help
 	  Say Y here to enable PCIe controller support on Qualcomm SoCs. The
@@ -141,7 +135,6 @@  config PCIE_ARMADA_8K
 	depends on PCI
 	depends on ARCH_MVEBU
 	depends on PCI_MSI_IRQ_DOMAIN
-	select PCIEPORTBUS
 	select PCIE_DW_HOST
 	help
 	  Say Y here if you want to enable PCIe controller support on
@@ -156,7 +149,6 @@  config PCIE_ARTPEC6_HOST
 	bool "Axis ARTPEC-6 PCIe controller Host Mode"
 	depends on MACH_ARTPEC6
 	depends on PCI && PCI_MSI_IRQ_DOMAIN
-	select PCIEPORTBUS
 	select PCIE_DW_HOST
 	select PCIE_ARTPEC6
 	help
@@ -178,7 +170,6 @@  config PCIE_KIRIN
 	bool "HiSilicon Kirin series SoCs PCIe controllers"
 	depends on PCI_MSI_IRQ_DOMAIN
 	depends on PCI
-	select PCIEPORTBUS
 	select PCIE_DW_HOST
 	help
 	  Say Y here if you want PCIe controller support
@@ -189,7 +180,6 @@  config PCIE_HISI_STB
 	depends on ARCH_HISI
 	depends on PCI
 	depends on PCI_MSI_IRQ_DOMAIN
-	select PCIEPORTBUS
 	select PCIE_DW_HOST
 	help
           Say Y here if you want PCIe controller support on HiSilicon STB SoCs
diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
index 0d0177ce436c..90f0cc9dfd95 100644
--- a/drivers/pci/host/Kconfig
+++ b/drivers/pci/host/Kconfig
@@ -83,7 +83,6 @@  config PCI_XGENE
 	bool "X-Gene PCIe controller"
 	depends on ARM64
 	depends on OF || (ACPI && PCI_QUIRKS)
-	select PCIEPORTBUS
 	help
 	  Say Y here if you want internal PCI support on APM X-Gene SoC.
 	  There are 5 internal PCIe ports available. Each port is GEN3 capable
@@ -194,7 +193,6 @@  config PCIE_MEDIATEK
 	depends on (ARM || ARM64) && (ARCH_MEDIATEK || COMPILE_TEST)
 	depends on OF
 	depends on PCI
-	select PCIEPORTBUS
 	help
 	  Say Y here if you want to enable PCIe controller support on
 	  MediaTek SoCs.