diff --git a/Documentation/networking/scaling.txt b/Documentation/networking/scaling.txt
index f55639d..834147c 100644
--- a/Documentation/networking/scaling.txt
+++ b/Documentation/networking/scaling.txt
@@ -366,8 +366,13 @@ XPS: Transmit Packet Steering
 
 Transmit Packet Steering is a mechanism for intelligently selecting
 which transmit queue to use when transmitting a packet on a multi-queue
-device. To accomplish this, a mapping from CPU to hardware queue(s) is
-recorded. The goal of this mapping is usually to assign queues
+device. This can be accomplished by recording two kinds of maps, either
+a mapping of CPU to hardware queue(s) or a mapping of receive queue(s)
+to hardware transmit queue(s).
+
+1. XPS using CPUs map
+
+The goal of this mapping is usually to assign queues
 exclusively to a subset of CPUs, where the transmit completions for
 these queues are processed on a CPU within this set. This choice
 provides two benefits. First, contention on the device queue lock is
@@ -377,12 +382,36 @@ transmit queue). Secondly, cache miss rate on transmit completion is
 reduced, in particular for data cache lines that hold the sk_buff
 structures.
 
-XPS is configured per transmit queue by setting a bitmap of CPUs that
-may use that queue to transmit. The reverse mapping, from CPUs to
-transmit queues, is computed and maintained for each network device.
-When transmitting the first packet in a flow, the function
-get_xps_queue() is called to select a queue. This function uses the ID
-of the running CPU as a key into the CPU-to-queue lookup table. If the
+2. XPS using receive queues map
+
+This mapping is used to pick transmit queue based on the receive
+queue(s) map configuration set by the administrator. A set of receive
+queues can be mapped to a set of transmit queues (many:many), although
+the common use case is a 1:1 mapping. This will enable sending packets
+on the same queue pair for transmit and receive. This is useful for
+busy polling multi-threaded workloads where there are challenges in
+associating a given CPU to a given application thread. The application
+threads are not pinned to CPUs and each thread handles packets
+received on a single queue. The receive queue number is cached in the
+socket for the connection and there is no need for adding flow entries
+as in the case of aRFS or flow director. In this model, sending the
+packets on the same transmit queue corresponding to the queue-pair
+associated with the receive queue has benefits in keeping the CPU overhead
+low. Transmit completion work is locked into the same queue pair that
+a given application is polling on. This avoids the overhead of triggering
+an interrupt on another CPU. When the application cleans up the packets
+during the busy poll, transmit completion may be processed along with it
+in the same thread context and so result in reduced latency.
+
+XPS is configured per transmit queue by setting a bitmap of
+CPUs/receive-queues that may use that queue to transmit. The reverse
+mapping, from CPUs to transmit queues or from receive-queues to transmit
+queues, is computed and maintained for each network device. When
+transmitting the first packet in a flow, the function get_xps_queue() is
+called to select a queue. This function uses the ID of the receive queue
+for the socket connection for a match in the receive queue-to-transmit queue
+lookup table. Alternatively, this function can also use the ID of the
+running CPU as a key into the CPU-to-queue lookup table. If the
 ID matches a single queue, that is used for transmission. If multiple
 queues match, one is selected by using the flow hash to compute an index
 into the set.
@@ -404,11 +433,15 @@ acknowledged.
 
 XPS is only available if the kconfig symbol CONFIG_XPS is enabled (on by
 default for SMP). The functionality remains disabled until explicitly
-configured. To enable XPS, the bitmap of CPUs that may use a transmit
-queue is configured using the sysfs file entry:
+configured. To enable XPS, the bitmap of CPUs/receive-queues that may
+use a transmit queue is configured using the sysfs file entry:
 
+For selection based on CPUs map:
 /sys/class/net/<dev>/queues/tx-<n>/xps_cpus
 
+For selection based on receive-queues map:
+/sys/class/net/<dev>/queues/tx-<n>/xps_rxqs
+
 == Suggested Configuration
 
 For a network device with a single transmission queue, XPS configuration
@@ -421,6 +454,11 @@ best CPUs to share a given queue are probably those that share the cache
 with the CPU that processes transmit completions for that queue
 (transmit interrupts).
 
+For transmit queue selection based on receive queue(s), XPS has to be
+explicitly configured mapping receive-queue(s) to transmit queue(s). If the
+user configuration for receive-queue map does not apply, then the transmit
+queue is selected based on the CPUs map.
+
 Per TX Queue rate limitation:
 =============================
 
