[1/2] imx8mqevk: readme: Put switch configuration for SD card boot

Message ID 1526430252-28624-1-git-send-email-festevam@gmail.com
State Accepted
Headers show
Series
  • [1/2] imx8mqevk: readme: Put switch configuration for SD card boot
Related show

Commit Message

Fabio Estevam May 16, 2018, 12:24 a.m.
From: Fabio Estevam <fabio.estevam@nxp.com>

Improve the documentation by adding the configuration of SW801 and SW802
switches for SD card boot.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
---
 board/freescale/imx8mqevk/readme.txt | 3 +++
 1 file changed, 3 insertions(+)

Comments

Thomas Petazzoni May 17, 2018, 8:21 p.m. | #1
Hello,

On Tue, 15 May 2018 21:24:11 -0300, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@nxp.com>
> 
> Improve the documentation by adding the configuration of SW801 and SW802
> switches for SD card boot.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
> ---
>  board/freescale/imx8mqevk/readme.txt | 3 +++
>  1 file changed, 3 insertions(+)

Both applied to master, thanks.

Thomas

Patch

diff --git a/board/freescale/imx8mqevk/readme.txt b/board/freescale/imx8mqevk/readme.txt
index d50dd6e..cb7e1dc 100644
--- a/board/freescale/imx8mqevk/readme.txt
+++ b/board/freescale/imx8mqevk/readme.txt
@@ -63,6 +63,9 @@  Boot the i.MX8mq EVK board
 
 To boot your newly created system:
 - insert the SD card in the SD slot of the board;
+- Configure the switches as follows:
+SW801:	ON	ON	OFF	OFF
+SW802:	ON	OFF
 - put a micro USB cable into the Debug USB Port and connect using a terminal
   emulator at 115200 bps, 8n1;
 - power on the board.