ARM: dts: imx53-qsb: Use IRQ_TYPE specifier

Message ID 1526253988-3848-1-git-send-email-hernan@vanguardiasur.com.ar
State New
Headers show
Series
  • ARM: dts: imx53-qsb: Use IRQ_TYPE specifier
Related show

Commit Message

Hernán Gonzalez May 13, 2018, 11:26 p.m.
Replace magic number with the proper IRQ_TYPE specifier to improve DT
readability.

Signed-off-by: Hernán Gonzalez <hernan@vanguardiasur.com.ar>
---
 arch/arm/boot/dts/imx53-qsb.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Shawn Guo May 15, 2018, 7:10 a.m. | #1
On Sun, May 13, 2018 at 08:26:28PM -0300, Hernán Gonzalez wrote:
> Replace magic number with the proper IRQ_TYPE specifier to improve DT
> readability.
> 
> Signed-off-by: Hernán Gonzalez <hernan@vanguardiasur.com.ar>

Applied, thanks.

Patch

diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts
index d3d662e..dca6c32 100644
--- a/arch/arm/boot/dts/imx53-qsb.dts
+++ b/arch/arm/boot/dts/imx53-qsb.dts
@@ -23,7 +23,7 @@ 
 		compatible = "dlg,da9053-aa", "dlg,da9052";
 		reg = <0x48>;
 		interrupt-parent = <&gpio7>;
-		interrupts = <11 0x8>; /* low-level active IRQ at GPIO7_11 */
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>; /* low-level active IRQ at GPIO7_11 */
 
 		regulators {
 			buck1_reg: buck1 {