Message ID | 1526104187-19896-1-git-send-email-alex.kiernan@gmail.com |
---|---|
State | Accepted |
Commit | b11ed7d602a48021d8ab96518ad80996d2b86077 |
Delegated to: | Tom Rini |
Headers | show |
Series | [U-Boot] bootcount: Add bootcount command | expand |
On Sat, 12 May 2018 05:49:47 +0000 Alex Kiernan <alex.kiernan@gmail.com> wrote: > Add a command to manipulate the bootcounter. This is useful if you can > run device recovery from inside U-Boot and need to reset the > bootcounter after executing that process as part of altbootcmd. > > Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> > --- > > cmd/Kconfig | 7 +++++++ > cmd/Makefile | 1 + > cmd/bootcount.c | 61 > +++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files > changed, 69 insertions(+) create mode 100644 cmd/bootcount.c > > diff --git a/cmd/Kconfig b/cmd/Kconfig > index eb14e08..825d4ad 100644 > --- a/cmd/Kconfig > +++ b/cmd/Kconfig > @@ -1218,6 +1218,13 @@ config CMD_BMP > the image into RAM, then using this command to look at it > or display it. > > +config CMD_BOOTCOUNT > + bool "bootcount" > + depends on BOOTCOUNT_LIMIT > + help > + Enable the bootcount command, which allows interrogation > and > + reset of the bootcounter. > + > config CMD_BSP > bool "Enable board-specific commands" > help > diff --git a/cmd/Makefile b/cmd/Makefile > index 0d7322e..c05dc2b 100644 > --- a/cmd/Makefile > +++ b/cmd/Makefile > @@ -22,6 +22,7 @@ obj-$(CONFIG_CMD_BEDBUG) += bedbug.o > obj-$(CONFIG_CMD_BINOP) += binop.o > obj-$(CONFIG_CMD_BLOCK_CACHE) += blkcache.o > obj-$(CONFIG_CMD_BMP) += bmp.o > +obj-$(CONFIG_CMD_BOOTCOUNT) += bootcount.o > obj-$(CONFIG_CMD_BOOTEFI) += bootefi.o > obj-$(CONFIG_CMD_BOOTMENU) += bootmenu.o > obj-$(CONFIG_CMD_BOOTSTAGE) += bootstage.o > diff --git a/cmd/bootcount.c b/cmd/bootcount.c > new file mode 100644 > index 0000000..c358418 > --- /dev/null > +++ b/cmd/bootcount.c > @@ -0,0 +1,61 @@ > +// SPDX-License-Identifier: GPL-2.0+ > + > +#include <common.h> > +#include <command.h> > +#include <bootcount.h> > + > +static int do_bootcount_print(cmd_tbl_t *cmdtp, int flag, int argc, > + char * const argv[]) > +{ > + printf("%lu\n", bootcount_load()); > + return CMD_RET_SUCCESS; > +} > + > +static int do_bootcount_reset(cmd_tbl_t *cmdtp, int flag, int argc, > + char * const argv[]) > +{ > + /* > + * note that we're explicitly not resetting the environment > + * variable, so you still have the old bootcounter available > + */ > + bootcount_store(0); > + return CMD_RET_SUCCESS; > +} > + > +static cmd_tbl_t bootcount_sub[] = { > + U_BOOT_CMD_MKENT(print, 1, 1, do_bootcount_print, "", ""), > + U_BOOT_CMD_MKENT(reset, 1, 1, do_bootcount_reset, "", ""), > +}; > + > +static int do_bootcount(cmd_tbl_t *cmdtp, int flag, int argc, > + char * const argv[]) > +{ > + cmd_tbl_t *cp; > + > + if (argc < 2) > + return CMD_RET_USAGE; > + > + /* drop initial "bootcount" arg */ > + argc--; > + argv++; > + > + cp = find_cmd_tbl(argv[0], bootcount_sub, > ARRAY_SIZE(bootcount_sub)); > + if (cp) > + return cp->cmd(cmdtp, flag, argc, argv); > + > + return CMD_RET_USAGE; > +} > + > +#if CONFIG_IS_ENABLED(SYS_LONGHELP) > +static char bootcount_help_text[] = > + "print - print current bootcounter\n" > + "reset - reset the bootcounter" > + ; > +#endif > + > +U_BOOT_CMD(bootcount, 2, 1, do_bootcount, > + "bootcount", > +#if CONFIG_IS_ENABLED(SYS_LONGHELP) > + bootcount_help_text > +#endif > +); Reviewed-by: Lukasz Majewski <lukma@denx.de> Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
On Sat, May 12, 2018 at 05:49:47AM +0000, Alex Kiernan wrote: > Add a command to manipulate the bootcounter. This is useful if you can > run device recovery from inside U-Boot and need to reset the bootcounter > after executing that process as part of altbootcmd. > > Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> > Reviewed-by: Lukasz Majewski <lukma@denx.de> Applied to u-boot/master, thanks!
diff --git a/cmd/Kconfig b/cmd/Kconfig index eb14e08..825d4ad 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -1218,6 +1218,13 @@ config CMD_BMP the image into RAM, then using this command to look at it or display it. +config CMD_BOOTCOUNT + bool "bootcount" + depends on BOOTCOUNT_LIMIT + help + Enable the bootcount command, which allows interrogation and + reset of the bootcounter. + config CMD_BSP bool "Enable board-specific commands" help diff --git a/cmd/Makefile b/cmd/Makefile index 0d7322e..c05dc2b 100644 --- a/cmd/Makefile +++ b/cmd/Makefile @@ -22,6 +22,7 @@ obj-$(CONFIG_CMD_BEDBUG) += bedbug.o obj-$(CONFIG_CMD_BINOP) += binop.o obj-$(CONFIG_CMD_BLOCK_CACHE) += blkcache.o obj-$(CONFIG_CMD_BMP) += bmp.o +obj-$(CONFIG_CMD_BOOTCOUNT) += bootcount.o obj-$(CONFIG_CMD_BOOTEFI) += bootefi.o obj-$(CONFIG_CMD_BOOTMENU) += bootmenu.o obj-$(CONFIG_CMD_BOOTSTAGE) += bootstage.o diff --git a/cmd/bootcount.c b/cmd/bootcount.c new file mode 100644 index 0000000..c358418 --- /dev/null +++ b/cmd/bootcount.c @@ -0,0 +1,61 @@ +// SPDX-License-Identifier: GPL-2.0+ + +#include <common.h> +#include <command.h> +#include <bootcount.h> + +static int do_bootcount_print(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) +{ + printf("%lu\n", bootcount_load()); + return CMD_RET_SUCCESS; +} + +static int do_bootcount_reset(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) +{ + /* + * note that we're explicitly not resetting the environment + * variable, so you still have the old bootcounter available + */ + bootcount_store(0); + return CMD_RET_SUCCESS; +} + +static cmd_tbl_t bootcount_sub[] = { + U_BOOT_CMD_MKENT(print, 1, 1, do_bootcount_print, "", ""), + U_BOOT_CMD_MKENT(reset, 1, 1, do_bootcount_reset, "", ""), +}; + +static int do_bootcount(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) +{ + cmd_tbl_t *cp; + + if (argc < 2) + return CMD_RET_USAGE; + + /* drop initial "bootcount" arg */ + argc--; + argv++; + + cp = find_cmd_tbl(argv[0], bootcount_sub, ARRAY_SIZE(bootcount_sub)); + if (cp) + return cp->cmd(cmdtp, flag, argc, argv); + + return CMD_RET_USAGE; +} + +#if CONFIG_IS_ENABLED(SYS_LONGHELP) +static char bootcount_help_text[] = + "print - print current bootcounter\n" + "reset - reset the bootcounter" + ; +#endif + +U_BOOT_CMD(bootcount, 2, 1, do_bootcount, + "bootcount", +#if CONFIG_IS_ENABLED(SYS_LONGHELP) + bootcount_help_text +#endif +);
Add a command to manipulate the bootcounter. This is useful if you can run device recovery from inside U-Boot and need to reset the bootcounter after executing that process as part of altbootcmd. Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> --- cmd/Kconfig | 7 +++++++ cmd/Makefile | 1 + cmd/bootcount.c | 61 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 69 insertions(+) create mode 100644 cmd/bootcount.c