[SRU,Artful,Bionic,Cosmic,1/1] UBUNTU: SAUCE: PCI / PM: Check device_may_wakeup() in pci_enable_wake()

Message ID 634632a75743a6a6a14ffd065c676bf85c22bc61.1525869777.git.joseph.salisbury@canonical.com
State New
Headers show
Series
  • UBUNTU: SAUCE: PCI / PM: Check device_may_wakeup() in pci_enable_wake()
Related show

Commit Message

Joseph Salisbury May 11, 2018, 6:41 p.m.
From: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>

BugLink: http://bugs.launchpad.net/bugs/1765646

Commit 0847684cfc5f0 (PCI / PM: Simplify device wakeup settings code)
went too far and dropped the device_may_wakeup() check from
pci_enable_wake() which causes wakeup to be enabled during system
suspend, hibernation or shutdown for some PCI devices that are not
allowed by user space to wake up the system from sleep (or power off).

As a result of this excessive power is drawn by some of the affected
systems while in sleep states or off.

Restore the device_may_wakeup() check in pci_enable_wake(), but make
sure that the PCI bus type's runtime suspend callback will not call
device_may_wakeup() which is about system wakeup from sleep and not
about device wakeup from runtime suspend.

Fixes: 0847684cfc5f0 (PCI / PM: Simplify device wakeup settings code)
Reported-by: Joseph Salisbury <joseph.salisbury@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Joseph Salisbury <joseph.salisbury@canonical.com>
---
 drivers/pci/pci.c | 29 +++++++++++++++++++++++------
 1 file changed, 23 insertions(+), 6 deletions(-)

Comments

Kleber Souza May 16, 2018, 1:10 p.m. | #1
On 05/11/18 20:41, Joseph Salisbury wrote:
> From: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
> 
> BugLink: http://bugs.launchpad.net/bugs/1765646

The correct BugLink is http://bugs.launchpad.net/bugs/1745646

This can be fixed when applying the patch.

> 
> Commit 0847684cfc5f0 (PCI / PM: Simplify device wakeup settings code)
> went too far and dropped the device_may_wakeup() check from
> pci_enable_wake() which causes wakeup to be enabled during system
> suspend, hibernation or shutdown for some PCI devices that are not
> allowed by user space to wake up the system from sleep (or power off).
> 
> As a result of this excessive power is drawn by some of the affected
> systems while in sleep states or off.
> 
> Restore the device_may_wakeup() check in pci_enable_wake(), but make
> sure that the PCI bus type's runtime suspend callback will not call
> device_may_wakeup() which is about system wakeup from sleep and not
> about device wakeup from runtime suspend.
> 
> Fixes: 0847684cfc5f0 (PCI / PM: Simplify device wakeup settings code)
> Reported-by: Joseph Salisbury <joseph.salisbury@canonical.com>
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> Signed-off-by: Joseph Salisbury <joseph.salisbury@canonical.com>

The patch has landed upstream as cfcadfaad7251d8b640713724b388164d75465b2.

We can fix the subject to remove the "UBUNTU: SAUCE:" part and fix the
SOB block when applying the patch.

Acked-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>


> ---
>  drivers/pci/pci.c | 29 +++++++++++++++++++++++------
>  1 file changed, 23 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index 8eac876..b1faa84 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -1893,7 +1893,7 @@ void pci_pme_active(struct pci_dev *dev, bool enable)
>  EXPORT_SYMBOL(pci_pme_active);
>  
>  /**
> - * pci_enable_wake - enable PCI device as wakeup event source
> + * __pci_enable_wake - enable PCI device as wakeup event source
>   * @dev: PCI device affected
>   * @state: PCI state from which device will issue wakeup events
>   * @enable: True to enable event generation; false to disable
> @@ -1911,7 +1911,7 @@ EXPORT_SYMBOL(pci_pme_active);
>   * Error code depending on the platform is returned if both the platform and
>   * the native mechanism fail to enable the generation of wake-up events
>   */
> -int pci_enable_wake(struct pci_dev *dev, pci_power_t state, bool enable)
> +static int __pci_enable_wake(struct pci_dev *dev, pci_power_t state, bool enable)
>  {
>  	int ret = 0;
>  
> @@ -1952,6 +1952,23 @@ int pci_enable_wake(struct pci_dev *dev, pci_power_t state, bool enable)
>  
>  	return ret;
>  }
> +
> +/**
> + * pci_enable_wake - change wakeup settings for a PCI device
> + * @pci_dev: Target device
> + * @state: PCI state from which device will issue wakeup events
> + * @enable: Whether or not to enable event generation
> + *
> + * If @enable is set, check device_may_wakeup() for the device before calling
> + * __pci_enable_wake() for it.
> + */
> +int pci_enable_wake(struct pci_dev *pci_dev, pci_power_t state, bool enable)
> +{
> +	if (enable && !device_may_wakeup(&pci_dev->dev))
> +		return -EINVAL;
> +
> +	return __pci_enable_wake(pci_dev, state, enable);
> +}
>  EXPORT_SYMBOL(pci_enable_wake);
>  
>  /**
> @@ -1964,9 +1981,9 @@ EXPORT_SYMBOL(pci_enable_wake);
>   * should not be called twice in a row to enable wake-up due to PCI PM vs ACPI
>   * ordering constraints.
>   *
> - * This function only returns error code if the device is not capable of
> - * generating PME# from both D3_hot and D3_cold, and the platform is unable to
> - * enable wake-up power for it.
> + * This function only returns error code if the device is not allowed to wake
> + * up the system from sleep or it is not capable of generating PME# from both
> + * D3_hot and D3_cold and the platform is unable to enable wake-up power for it.
>   */
>  int pci_wake_from_d3(struct pci_dev *dev, bool enable)
>  {
> @@ -2097,7 +2114,7 @@ int pci_finish_runtime_suspend(struct pci_dev *dev)
>  
>  	dev->runtime_d3cold = target_state == PCI_D3cold;
>  
> -	pci_enable_wake(dev, target_state, pci_dev_run_wake(dev));
> +	__pci_enable_wake(dev, target_state, pci_dev_run_wake(dev));
>  
>  	error = pci_set_power_state(dev, target_state);
>  
>

Patch

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 8eac876..b1faa84 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1893,7 +1893,7 @@  void pci_pme_active(struct pci_dev *dev, bool enable)
 EXPORT_SYMBOL(pci_pme_active);
 
 /**
- * pci_enable_wake - enable PCI device as wakeup event source
+ * __pci_enable_wake - enable PCI device as wakeup event source
  * @dev: PCI device affected
  * @state: PCI state from which device will issue wakeup events
  * @enable: True to enable event generation; false to disable
@@ -1911,7 +1911,7 @@  EXPORT_SYMBOL(pci_pme_active);
  * Error code depending on the platform is returned if both the platform and
  * the native mechanism fail to enable the generation of wake-up events
  */
-int pci_enable_wake(struct pci_dev *dev, pci_power_t state, bool enable)
+static int __pci_enable_wake(struct pci_dev *dev, pci_power_t state, bool enable)
 {
 	int ret = 0;
 
@@ -1952,6 +1952,23 @@  int pci_enable_wake(struct pci_dev *dev, pci_power_t state, bool enable)
 
 	return ret;
 }
+
+/**
+ * pci_enable_wake - change wakeup settings for a PCI device
+ * @pci_dev: Target device
+ * @state: PCI state from which device will issue wakeup events
+ * @enable: Whether or not to enable event generation
+ *
+ * If @enable is set, check device_may_wakeup() for the device before calling
+ * __pci_enable_wake() for it.
+ */
+int pci_enable_wake(struct pci_dev *pci_dev, pci_power_t state, bool enable)
+{
+	if (enable && !device_may_wakeup(&pci_dev->dev))
+		return -EINVAL;
+
+	return __pci_enable_wake(pci_dev, state, enable);
+}
 EXPORT_SYMBOL(pci_enable_wake);
 
 /**
@@ -1964,9 +1981,9 @@  EXPORT_SYMBOL(pci_enable_wake);
  * should not be called twice in a row to enable wake-up due to PCI PM vs ACPI
  * ordering constraints.
  *
- * This function only returns error code if the device is not capable of
- * generating PME# from both D3_hot and D3_cold, and the platform is unable to
- * enable wake-up power for it.
+ * This function only returns error code if the device is not allowed to wake
+ * up the system from sleep or it is not capable of generating PME# from both
+ * D3_hot and D3_cold and the platform is unable to enable wake-up power for it.
  */
 int pci_wake_from_d3(struct pci_dev *dev, bool enable)
 {
@@ -2097,7 +2114,7 @@  int pci_finish_runtime_suspend(struct pci_dev *dev)
 
 	dev->runtime_d3cold = target_state == PCI_D3cold;
 
-	pci_enable_wake(dev, target_state, pci_dev_run_wake(dev));
+	__pci_enable_wake(dev, target_state, pci_dev_run_wake(dev));
 
 	error = pci_set_power_state(dev, target_state);