[06/11] drm/i915: Split DP/eDP/FDI and HDMI/DVI DDI buffer programming apart

Message ID 20180511062101.27495-7-tjaalton@ubuntu.com
State New
Headers show
Series
  • i915_bpo: Fix flickering issue after panel change
Related show

Commit Message

Timo Aaltonen May 11, 2018, 6:20 a.m.
From: Ville Syrjälä <ville.syrjala@linux.intel.com>

BugLink: http://bugs.launchpad.net/bugs/1770565

DDI buffer prorgramming works quite differently depending on
the mode of the DDI port (DP/eDP/FDI vs. HDMI/DVI). Let's split
the function that does the programming into two matching variants
as well.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1468328376-6380-7-git-send-email-ville.syrjala@linux.intel.com
(backported from commit 32bdc400963cee9e55889c2973b9553ecee1bcc6)
Signed-off-by: Timo Aaltonen <timo.aaltonen@canonical.com>
---
 ubuntu/i915/intel_ddi.c    | 75 +++++++++++++++++++++++---------------
 ubuntu/i915/intel_dp_mst.c |  4 +-
 ubuntu/i915/intel_drv.h    |  2 +-
 3 files changed, 49 insertions(+), 32 deletions(-)

Patch

diff --git a/ubuntu/i915/intel_ddi.c b/ubuntu/i915/intel_ddi.c
index bdb711c89ec6..7d8833277e5a 100644
--- a/ubuntu/i915/intel_ddi.c
+++ b/ubuntu/i915/intel_ddi.c
@@ -421,28 +421,20 @@  static int intel_ddi_hdmi_level(struct drm_i915_private *dev_priv, enum port por
 
 /*
  * Starting with Haswell, DDI port buffers must be programmed with correct
- * values in advance. The buffer values are different for FDI and DP modes,
- * but the HDMI/DVI fields are shared among those. So we program the DDI
- * in either FDI or DP modes only, as HDMI connections will work with both
- * of those
+ * values in advance. This function programs the correct values for
+ * DP/eDP/FDI use cases.
  */
-void intel_prepare_ddi_buffer(struct intel_encoder *encoder)
+void intel_prepare_dp_ddi_buffers(struct intel_encoder *encoder)
 {
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 	u32 iboost_bit = 0;
-	int i, n_hdmi_entries, n_dp_entries, n_edp_entries,
-	    size;
-	int hdmi_level;
-	enum port port;
+	int i, n_dp_entries, n_edp_entries, size;
+	enum port port = intel_ddi_get_encoder_port(encoder);
 	const struct ddi_buf_trans *ddi_translations_fdi;
 	const struct ddi_buf_trans *ddi_translations_dp;
 	const struct ddi_buf_trans *ddi_translations_edp;
-	const struct ddi_buf_trans *ddi_translations_hdmi;
 	const struct ddi_buf_trans *ddi_translations;
 
-	port = intel_ddi_get_encoder_port(encoder);
-	hdmi_level = intel_ddi_hdmi_level(dev_priv, port);
-
 	if (IS_BROXTON(dev_priv))
 		return;
 
@@ -452,8 +444,7 @@  void intel_prepare_ddi_buffer(struct intel_encoder *encoder)
 				skl_get_buf_trans_dp(dev_priv, &n_dp_entries);
 		ddi_translations_edp =
 				skl_get_buf_trans_edp(dev_priv, &n_edp_entries);
-		ddi_translations_hdmi =
-				skl_get_buf_trans_hdmi(dev_priv, &n_hdmi_entries);
+
 		/* If we're boosting the current, set bit 31 of trans1 */
 		if (dev_priv->vbt.ddi_port_info[port].hdmi_boost_level ||
 		    dev_priv->vbt.ddi_port_info[port].dp_boost_level)
@@ -466,7 +457,6 @@  void intel_prepare_ddi_buffer(struct intel_encoder *encoder)
 	} else if (IS_BROADWELL(dev_priv)) {
 		ddi_translations_fdi = bdw_ddi_translations_fdi;
 		ddi_translations_dp = bdw_ddi_translations_dp;
-
 		if (dev_priv->vbt.edp.low_vswing) {
 			ddi_translations_edp = bdw_ddi_translations_edp;
 			n_edp_entries = ARRAY_SIZE(bdw_ddi_translations_edp);
@@ -474,27 +464,19 @@  void intel_prepare_ddi_buffer(struct intel_encoder *encoder)
 			ddi_translations_edp = bdw_ddi_translations_dp;
 			n_edp_entries = ARRAY_SIZE(bdw_ddi_translations_dp);
 		}
-
-		ddi_translations_hdmi = bdw_ddi_translations_hdmi;
-
 		n_dp_entries = ARRAY_SIZE(bdw_ddi_translations_dp);
-		n_hdmi_entries = ARRAY_SIZE(bdw_ddi_translations_hdmi);
 	} else if (IS_HASWELL(dev_priv)) {
 		ddi_translations_fdi = hsw_ddi_translations_fdi;
 		ddi_translations_dp = hsw_ddi_translations_dp;
 		ddi_translations_edp = hsw_ddi_translations_dp;
-		ddi_translations_hdmi = hsw_ddi_translations_hdmi;
 		n_dp_entries = n_edp_entries = ARRAY_SIZE(hsw_ddi_translations_dp);
-		n_hdmi_entries = ARRAY_SIZE(hsw_ddi_translations_hdmi);
 	} else {
 		WARN(1, "ddi translation table missing\n");
 		ddi_translations_edp = bdw_ddi_translations_dp;
 		ddi_translations_fdi = bdw_ddi_translations_fdi;
 		ddi_translations_dp = bdw_ddi_translations_dp;
-		ddi_translations_hdmi = bdw_ddi_translations_hdmi;
 		n_edp_entries = ARRAY_SIZE(bdw_ddi_translations_edp);
 		n_dp_entries = ARRAY_SIZE(bdw_ddi_translations_dp);
-		n_hdmi_entries = ARRAY_SIZE(bdw_ddi_translations_hdmi);
 	}
 
 	switch (encoder->type) {
@@ -503,7 +485,6 @@  void intel_prepare_ddi_buffer(struct intel_encoder *encoder)
 		size = n_edp_entries;
 		break;
 	case INTEL_OUTPUT_DISPLAYPORT:
-	case INTEL_OUTPUT_HDMI:
 		ddi_translations = ddi_translations_dp;
 		size = n_dp_entries;
 		break;
@@ -521,10 +502,44 @@  void intel_prepare_ddi_buffer(struct intel_encoder *encoder)
 		I915_WRITE(DDI_BUF_TRANS_HI(port, i),
 			   ddi_translations[i].trans2);
 	}
+}
+
+/*
+ * Starting with Haswell, DDI port buffers must be programmed with correct
+ * values in advance. This function programs the correct values for
+ * HDMI/DVI use cases.
+ */
+static void intel_prepare_hdmi_ddi_buffers(struct intel_encoder *encoder)
+{
+	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+	u32 iboost_bit = 0;
+	int n_hdmi_entries, hdmi_level;
+	enum port port = intel_ddi_get_encoder_port(encoder);
+	const struct ddi_buf_trans *ddi_translations_hdmi;
 
-	if (encoder->type != INTEL_OUTPUT_HDMI)
+	if (IS_BROXTON(dev_priv))
 		return;
 
+	hdmi_level = intel_ddi_hdmi_level(dev_priv, port);
+
+	if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) {
+		ddi_translations_hdmi = skl_get_buf_trans_hdmi(dev_priv, &n_hdmi_entries);
+		/* If we're boosting the current, set bit 31 of trans1 */
+		if (dev_priv->vbt.ddi_port_info[port].hdmi_boost_level ||
+		    dev_priv->vbt.ddi_port_info[port].dp_boost_level)
+			iboost_bit = DDI_BUF_BALANCE_LEG_ENABLE;
+	} else if (IS_BROADWELL(dev_priv)) {
+		ddi_translations_hdmi = bdw_ddi_translations_hdmi;
+		n_hdmi_entries = ARRAY_SIZE(bdw_ddi_translations_hdmi);
+	} else if (IS_HASWELL(dev_priv)) {
+		ddi_translations_hdmi = hsw_ddi_translations_hdmi;
+		n_hdmi_entries = ARRAY_SIZE(hsw_ddi_translations_hdmi);
+	} else {
+		WARN(1, "ddi translation table missing\n");
+		ddi_translations_hdmi = bdw_ddi_translations_hdmi;
+		n_hdmi_entries = ARRAY_SIZE(bdw_ddi_translations_hdmi);
+	}
+
 	/* Entry 9 is for HDMI: */
 	I915_WRITE(DDI_BUF_TRANS_LO(port, 9),
 		   ddi_translations_hdmi[hdmi_level].trans1 | iboost_bit);
@@ -565,7 +580,7 @@  void hsw_fdi_link_train(struct drm_crtc *crtc)
 
 	for_each_encoder_on_crtc(dev, crtc, encoder) {
 		WARN_ON(encoder->type != INTEL_OUTPUT_ANALOG);
-		intel_prepare_ddi_buffer(encoder);
+		intel_prepare_dp_ddi_buffers(encoder);
 	}
 
 	/* Set the FDI_RX_MISC pwrdn lanes and the 2 workarounds listed at the
@@ -1632,8 +1647,6 @@  static void intel_ddi_pre_enable(struct intel_encoder *intel_encoder)
 		intel_dp_dual_mode_set_tmds_output(intel_hdmi, true);
 	}
 
-	intel_prepare_ddi_buffer(intel_encoder);
-
 	if (type == INTEL_OUTPUT_EDP) {
 		struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
 		intel_edp_panel_on(intel_dp);
@@ -1644,6 +1657,8 @@  static void intel_ddi_pre_enable(struct intel_encoder *intel_encoder)
 	if (type == INTEL_OUTPUT_DISPLAYPORT || type == INTEL_OUTPUT_EDP) {
 		struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
 
+		intel_prepare_dp_ddi_buffers(intel_encoder);
+
 		intel_dp_set_link_params(intel_dp, crtc->config);
 
 		intel_ddi_init_dp_buf_reg(intel_encoder);
@@ -1656,6 +1671,8 @@  static void intel_ddi_pre_enable(struct intel_encoder *intel_encoder)
 		struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
 		int level = intel_ddi_hdmi_level(dev_priv, port);
 
+		intel_prepare_hdmi_ddi_buffers(intel_encoder);
+
 		if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv))
 			skl_ddi_set_iboost(intel_encoder, level);
 		else if (IS_BROXTON(dev_priv))
diff --git a/ubuntu/i915/intel_dp_mst.c b/ubuntu/i915/intel_dp_mst.c
index 0d223543a5b9..d5aa599124e0 100644
--- a/ubuntu/i915/intel_dp_mst.c
+++ b/ubuntu/i915/intel_dp_mst.c
@@ -177,10 +177,10 @@  static void intel_mst_pre_enable_dp(struct intel_encoder *encoder)
 	intel_mst->port = found->port;
 
 	if (intel_dp->active_mst_links == 0) {
-		intel_prepare_ddi_buffer(&intel_dig_port->base);
-
 		intel_ddi_clk_select(&intel_dig_port->base, intel_crtc->config);
 
+		intel_prepare_dp_ddi_buffers(&intel_dig_port->base);
+
 		intel_dp_set_link_params(intel_dp, intel_crtc->config);
 
 		intel_ddi_init_dp_buf_reg(&intel_dig_port->base);
diff --git a/ubuntu/i915/intel_drv.h b/ubuntu/i915/intel_drv.h
index bd4b1fe2da67..e5105af7d9a6 100644
--- a/ubuntu/i915/intel_drv.h
+++ b/ubuntu/i915/intel_drv.h
@@ -1066,7 +1066,7 @@  void intel_crt_init(struct drm_device *dev);
 /* intel_ddi.c */
 void intel_ddi_clk_select(struct intel_encoder *encoder,
 			  const struct intel_crtc_state *pipe_config);
-void intel_prepare_ddi_buffer(struct intel_encoder *encoder);
+void intel_prepare_dp_ddi_buffers(struct intel_encoder *encoder);
 void hsw_fdi_link_train(struct drm_crtc *crtc);
 void intel_ddi_init(struct drm_device *dev, enum port port);
 enum port intel_ddi_get_encoder_port(struct intel_encoder *intel_encoder);