| Message ID | 20180510215919.27808-3-j.neuschaefer@gmx.net (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 9dcb3df4281876731e4e8bff7940514d72375154 |
| Headers | show |
| Series | powerpc: Wii IRQ fixes | expand |
diff --git a/arch/powerpc/platforms/embedded6xx/hlwd-pic.c b/arch/powerpc/platforms/embedded6xx/hlwd-pic.c index e3e3af73e9d8..8112b39879d6 100644 --- a/arch/powerpc/platforms/embedded6xx/hlwd-pic.c +++ b/arch/powerpc/platforms/embedded6xx/hlwd-pic.c @@ -35,6 +35,8 @@ */ #define HW_BROADWAY_ICR 0x00 #define HW_BROADWAY_IMR 0x04 +#define HW_STARLET_ICR 0x08 +#define HW_STARLET_IMR 0x0c /* @@ -74,6 +76,9 @@ static void hlwd_pic_unmask(struct irq_data *d) void __iomem *io_base = irq_data_get_irq_chip_data(d); setbits32(io_base + HW_BROADWAY_IMR, 1 << irq); + + /* Make sure the ARM (aka. Starlet) doesn't handle this interrupt. */ + clrbits32(io_base + HW_STARLET_IMR, 1 << irq); }
The interrupt controller inside the Wii's Hollywood chip is connected to two masters, the "Broadway" PowerPC and the "Starlet" ARM926, each with their own interrupt status and mask registers. When booting the Wii with mini[1], interrupts from the SD card controller (IRQ 7) are handled by the ARM, because mini provides SD access over IPC. Linux however can't currently use or disable this IPC service, so both sides try to handle IRQ 7 without coordination. Let's instead make sure that all interrupts that are unmasked on the PPC side are masked on the ARM side; this will also make sure that Linux can properly talk to the SD card controller (and potentially other devices). If access to a device through IPC is desired in the future, interrupts from that device should not be handled by Linux directly. [1]: https://github.com/lewurm/mini Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> --- arch/powerpc/platforms/embedded6xx/hlwd-pic.c | 5 +++++ 1 file changed, 5 insertions(+)