[v2,11/14] mtd: rawnand: qcom: minor code reorganization for bad block check

Message ID 1525350041-22995-12-git-send-email-absahu@codeaurora.org
State Superseded
Delegated to: Miquel Raynal
Headers show
Series
  • Update for QCOM NAND driver
Related show

Commit Message

Abhishek Sahu May 3, 2018, 12:20 p.m.
The QCOM NAND layout is such that, the bad block byte offset for
last codeword will come to first byte in spare area. Currently,
the raw read for last codeword is being done with copy_last_cw
function. It does following 2 things

1. Read the last codeword bytes from NAND chip to NAND
   controller internal HW buffer.
2. Copy all these bytes from this HW buffer to driver RAM
   buffer.

For bad block check, maximum two bytes are required so instead of
copying the complete bytes in step 2, only those bbm_size bytes
can be copied.

This patch does minor code reorganization for the same. After
this, copy_last_cw function won’t be required.

Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
---
* Changes from v1:

 NEW CHANGE

 drivers/mtd/nand/raw/qcom_nandc.c | 66 +++++++++++++++------------------------
 1 file changed, 25 insertions(+), 41 deletions(-)

Patch

diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
index 17b7f3af..10bdc6c 100644
--- a/drivers/mtd/nand/raw/qcom_nandc.c
+++ b/drivers/mtd/nand/raw/qcom_nandc.c
@@ -1771,41 +1771,6 @@  static int read_page_ecc(struct qcom_nand_host *host, u8 *data_buf,
 	return parse_read_errors(host, data_buf_start, oob_buf_start);
 }
 
-/*
- * a helper that copies the last step/codeword of a page (containing free oob)
- * into our local buffer
- */
-static int copy_last_cw(struct qcom_nand_host *host, int page)
-{
-	struct nand_chip *chip = &host->chip;
-	struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
-	struct nand_ecc_ctrl *ecc = &chip->ecc;
-	int size;
-	int ret;
-
-	clear_read_regs(nandc);
-
-	size = host->use_ecc ? host->cw_data : host->cw_size;
-
-	/* prepare a clean read buffer */
-	memset(nandc->data_buffer, 0xff, size);
-
-	set_address(host, host->cw_size * (ecc->steps - 1), page);
-	update_rw_regs(host, 1, true);
-
-	config_nand_single_cw_page_read(nandc);
-
-	read_data_dma(nandc, FLASH_BUF_ACC, nandc->data_buffer, size, 0);
-
-	ret = submit_descs(nandc);
-	if (ret)
-		dev_err(nandc->dev, "failed to copy last codeword\n");
-
-	free_descs(nandc);
-
-	return ret;
-}
-
 /* implements ecc->read_page() */
 static int qcom_nandc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
 				uint8_t *buf, int oob_required, int page)
@@ -2121,6 +2086,7 @@  static int qcom_nandc_block_bad(struct mtd_info *mtd, loff_t ofs)
 	struct nand_ecc_ctrl *ecc = &chip->ecc;
 	int page, ret, bbpos, bad = 0;
 	u32 flash_status;
+	u8 *bbm_bytes_buf = chip->data_buf;
 
 	page = (int)(ofs >> chip->page_shift) & chip->pagemask;
 
@@ -2131,11 +2097,31 @@  static int qcom_nandc_block_bad(struct mtd_info *mtd, loff_t ofs)
 	 * that contains the BBM
 	 */
 	host->use_ecc = false;
+	bbpos = mtd->writesize - host->cw_size * (ecc->steps - 1);
 
 	clear_bam_transaction(nandc);
-	ret = copy_last_cw(host, page);
-	if (ret)
+	clear_read_regs(nandc);
+
+	set_address(host, host->cw_size * (ecc->steps - 1), page);
+	update_rw_regs(host, 1, true);
+
+	/*
+	 * The last codeword data will be copied from NAND device to NAND
+	 * controller internal HW buffer. Copy only required BBM size bytes
+	 * from this HW buffer to bbm_bytes_buf which is present at
+	 * bbpos offset.
+	 */
+	nandc_set_read_loc(nandc, 0, bbpos, host->bbm_size, 1);
+	config_nand_single_cw_page_read(nandc);
+	read_data_dma(nandc, FLASH_BUF_ACC + bbpos, bbm_bytes_buf,
+		      host->bbm_size, 0);
+
+	ret = submit_descs(nandc);
+	free_descs(nandc);
+	if (ret) {
+		dev_err(nandc->dev, "failed to copy bad block bytes\n");
 		goto err;
+	}
 
 	flash_status = le32_to_cpu(nandc->reg_read_buf[0]);
 
@@ -2144,12 +2130,10 @@  static int qcom_nandc_block_bad(struct mtd_info *mtd, loff_t ofs)
 		goto err;
 	}
 
-	bbpos = mtd->writesize - host->cw_size * (ecc->steps - 1);
-
-	bad = nandc->data_buffer[bbpos] != 0xff;
+	bad = bbm_bytes_buf[0] != 0xff;
 
 	if (chip->options & NAND_BUSWIDTH_16)
-		bad = bad || (nandc->data_buffer[bbpos + 1] != 0xff);
+		bad = bad || (bbm_bytes_buf[1] != 0xff);
 err:
 	return bad;
 }