@@ -29,13 +29,13 @@
#include <common.h>
#include <watchdog.h>
#include <asm/io.h>
-#include "ftwdt010_wdt.h"
+#include <faraday/ftwdt010_wdt.h>
/*
* Set the watchdog time interval.
* Counter is 32 bit.
*/
-static int ftwdt010_wdt_settimeout(unsigned int timeout)
+int ftwdt010_wdt_settimeout(unsigned int timeout)
{
unsigned int reg;
@@ -61,7 +61,7 @@ static int ftwdt010_wdt_settimeout(unsigned int timeout)
return 0;
}
-void ftwdt010_wdt_reset()
+void ftwdt010_wdt_reset(void)
{
struct ftwdt010_wdt *wd = (struct ftwdt010_wdt *)CONFIG_FTWDT010_BASE;
@@ -75,7 +75,7 @@ void ftwdt010_wdt_reset()
writel((FTWDT010_WDCR_RST | FTWDT010_WDCR_ENABLE), &wd->wdcr);
}
-void ftwdt010_wdt_disable()
+void ftwdt010_wdt_disable(void)
{
struct ftwdt010_wdt *wd = (struct ftwdt010_wdt *)CONFIG_FTWDT010_BASE;
@@ -90,7 +90,8 @@ void ftwdt010_wdt_disable()
writel(0, &wd->wdcr);
}
-void hw_watchdog_reset()
+#if defined(CONFIG_HW_WATCHDOG)
+void hw_watchdog_reset(void)
{
ftwdt010_wdt_reset();
}
@@ -100,3 +101,4 @@ void hw_watchdog_init(void)
/* set timer in ms */
ftwdt010_wdt_settimeout(CONFIG_FTWDT010_HW_TIMEOUT * 1000);
}
+#endif
deleted file mode 100644
@@ -1,103 +0,0 @@
-/*
- * Watchdog driver for the FTWDT010 Watch Dog Driver
- *
- * (c) Copyright 2004 Faraday Technology Corp. (www.faraday-tech.com)
- * Based on sa1100_wdt.c by Oleg Drokin <green@crimea.edu>
- * Based on SoftDog driver by Alan Cox <alan@redhat.com>
- *
- * Copyright (C) 2011 Andes Technology Corporation
- * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * 27/11/2004 Initial release, Faraday.
- * 12/01/2011 Port to u-boot, Macpaul Lin.
- */
-
-#ifndef __FTWDT010_H
-#define __FTWDT010_H
-
-struct ftwdt010_wdt {
- unsigned int wdcounter; /* Counter Reg - 0x00 */
- unsigned int wdload; /* Counter Auto Reload Reg - 0x04 */
- unsigned int wdrestart; /* Counter Restart Reg - 0x08 */
- unsigned int wdcr; /* Control Reg - 0x0c */
- unsigned int wdstatus; /* Status Reg - 0x10 */
- unsigned int wdclear; /* Timer Clear - 0x14 */
- unsigned int wdintrlen; /* Interrupt Length - 0x18 */
-};
-
-/*
- * WDLOAD - Counter Auto Reload Register
- * The Auto Reload Register is set to 0x03EF1480 (66Mhz) by default.
- * Which means in a 66MHz system, the period of Watch Dog timer reset is
- * one second.
- */
-#define FTWDT010_WDLOAD(x) ((x) & 0xffffffff)
-
-/*
- * WDRESTART - Watch Dog Timer Counter Restart Register
- * If writing 0x5AB9 to WDRESTART register, Watch Dog timer will
- * automatically reload WDLOAD to WDCOUNTER and restart counting.
- */
-#define FTWDT010_WDRESTART_MAGIC 0x5AB9
-
-/* WDCR - Watch Dog Timer Control Register */
-#define FTWDT010_WDCR_ENABLE (1 << 0)
-#define FTWDT010_WDCR_RST (1 << 1)
-#define FTWDT010_WDCR_INTR (1 << 2)
-/* FTWDT010_WDCR_EXT bit: Watch Dog Timer External Signal Enable */
-#define FTWDT010_WDCR_EXT (1 << 3)
-/* FTWDT010_WDCR_CLOCK bit: Clock Source: 0: PCLK, 1: EXTCLK.
- * The clock source PCLK cannot be gated when system sleeps, even if
- * WDCLOCK bit is turned on.
- *
- * Faraday's Watch Dog timer can be driven by an external clock. The
- * programmer just needs to write one to WdCR[WdClock] bit.
- *
- * Note: There is a limitation between EXTCLK and PCLK:
- * EXTCLK cycle time / PCLK cycle time > 2.
- * If the system does not need an external clock,
- * just keep WdCR[WdClock] bit in its default value.
- */
-#define FTWDT010_WDCR_CLOCK (1 << 4)
-
-/*
- * WDSTATUS - Watch Dog Timer Status Register
- * This bit is set when the counter reaches Zero
- */
-#define FTWDT010_WDSTATUS(x) ((x) & 0x1)
-
-/*
- * WDCLEAR - Watch Dog Timer Clear Register
- * Writing one to this register will clear WDSTATUS.
- */
-#define FTWDT010_WDCLEAR (1 << 0)
-
-/*
- * WDINTRLEN - Watch Dog Timer Interrupt Length
- * This register controls the duration length of wd_rst, wd_intr and wd_ext.
- * The default value is 0xFF.
- */
-#define FTWDT010_WDINTRLEN(x) ((x) & 0xff)
-
-/*
- * Variable timeout should be set in ms.
- * (CONFIG_SYS_CLK_FREQ/1000) equals 1 ms.
- * WDLOAD = timeout * TIMEOUT_FACTOR.
- */
-#define FTWDT010_TIMEOUT_FACTOR (CONFIG_SYS_CLK_FREQ / 1000) /* 1 ms */
-
-#endif /* __FTWDT010_H */
new file mode 100644
@@ -0,0 +1,106 @@
+/*
+ * Watchdog driver for the FTWDT010 Watch Dog Driver
+ *
+ * (c) Copyright 2004 Faraday Technology Corp. (www.faraday-tech.com)
+ * Based on sa1100_wdt.c by Oleg Drokin <green@crimea.edu>
+ * Based on SoftDog driver by Alan Cox <alan@redhat.com>
+ *
+ * Copyright (C) 2011 Andes Technology Corporation
+ * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * 27/11/2004 Initial release, Faraday.
+ * 12/01/2011 Port to u-boot, Macpaul Lin.
+ */
+
+#ifndef __FTWDT010_H
+#define __FTWDT010_H
+
+struct ftwdt010_wdt {
+ unsigned int wdcounter; /* Counter Reg - 0x00 */
+ unsigned int wdload; /* Counter Auto Reload Reg - 0x04 */
+ unsigned int wdrestart; /* Counter Restart Reg - 0x08 */
+ unsigned int wdcr; /* Control Reg - 0x0c */
+ unsigned int wdstatus; /* Status Reg - 0x10 */
+ unsigned int wdclear; /* Timer Clear - 0x14 */
+ unsigned int wdintrlen; /* Interrupt Length - 0x18 */
+};
+
+/*
+ * WDLOAD - Counter Auto Reload Register
+ * The Auto Reload Register is set to 0x03EF1480 (66Mhz) by default.
+ * Which means in a 66MHz system, the period of Watch Dog timer reset is
+ * one second.
+ */
+#define FTWDT010_WDLOAD(x) ((x) & 0xffffffff)
+
+/*
+ * WDRESTART - Watch Dog Timer Counter Restart Register
+ * If writing 0x5AB9 to WDRESTART register, Watch Dog timer will
+ * automatically reload WDLOAD to WDCOUNTER and restart counting.
+ */
+#define FTWDT010_WDRESTART_MAGIC 0x5AB9
+
+/* WDCR - Watch Dog Timer Control Register */
+#define FTWDT010_WDCR_ENABLE (1 << 0)
+#define FTWDT010_WDCR_RST (1 << 1)
+#define FTWDT010_WDCR_INTR (1 << 2)
+/* FTWDT010_WDCR_EXT bit: Watch Dog Timer External Signal Enable */
+#define FTWDT010_WDCR_EXT (1 << 3)
+/* FTWDT010_WDCR_CLOCK bit: Clock Source: 0: PCLK, 1: EXTCLK.
+ * The clock source PCLK cannot be gated when system sleeps, even if
+ * WDCLOCK bit is turned on.
+ *
+ * Faraday's Watch Dog timer can be driven by an external clock. The
+ * programmer just needs to write one to WdCR[WdClock] bit.
+ *
+ * Note: There is a limitation between EXTCLK and PCLK:
+ * EXTCLK cycle time / PCLK cycle time > 2.
+ * If the system does not need an external clock,
+ * just keep WdCR[WdClock] bit in its default value.
+ */
+#define FTWDT010_WDCR_CLOCK (1 << 4)
+
+/*
+ * WDSTATUS - Watch Dog Timer Status Register
+ * This bit is set when the counter reaches Zero
+ */
+#define FTWDT010_WDSTATUS(x) ((x) & 0x1)
+
+/*
+ * WDCLEAR - Watch Dog Timer Clear Register
+ * Writing one to this register will clear WDSTATUS.
+ */
+#define FTWDT010_WDCLEAR (1 << 0)
+
+/*
+ * WDINTRLEN - Watch Dog Timer Interrupt Length
+ * This register controls the duration length of wd_rst, wd_intr and wd_ext.
+ * The default value is 0xFF.
+ */
+#define FTWDT010_WDINTRLEN(x) ((x) & 0xff)
+
+/*
+ * Variable timeout should be set in ms.
+ * (CONFIG_SYS_CLK_FREQ/1000) equals 1 ms.
+ * WDLOAD = timeout * TIMEOUT_FACTOR.
+ */
+#define FTWDT010_TIMEOUT_FACTOR (CONFIG_SYS_CLK_FREQ / 1000) /* 1 ms */
+
+void ftwdt010_wdt_reset(void);
+void ftwdt010_wdt_disable(void);
+
+#endif /* __FTWDT010_H */
1. Move header to include/faraday 2. Fix include path in ftwdt010_wdt.c 3. Fix function prototype and declaration to - ftwdt010_wdt_settimeout - ftwdt010_wdt_reset - ftwdt010_wdt_disable 4. Add "#if definde (CONFIG_HW_WATCHDOG)" let user have flexibilty to choose which better to his product. Signed-off-by: Macpaul Lin <macpaul@andestech.com> --- Note: - This patch is the diff of ftwdt010_wdt between the code in current master (v4) and the latest patch (v6, /patch/88164/). drivers/watchdog/ftwdt010_wdt.c | 12 +++-- drivers/watchdog/ftwdt010_wdt.h | 103 ------------------------------------- include/faraday/ftwdt010_wdt.h | 106 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 113 insertions(+), 108 deletions(-) delete mode 100644 drivers/watchdog/ftwdt010_wdt.h create mode 100644 include/faraday/ftwdt010_wdt.h