diff mbox series

[net-next,02/10] igb: Fix queue selection on MAC filters on i210

Message ID 20180425182232.28935-3-jeffrey.t.kirsher@intel.com
State Accepted, archived
Delegated to: David Miller
Headers show
Series 1GbE Intel Wired LAN Driver Updates 2018-04-25 | expand

Commit Message

Kirsher, Jeffrey T April 25, 2018, 6:22 p.m. UTC 
From: Vinicius Costa Gomes <vinicius.gomes@intel.com>

On the RAH registers there are semantic differences on the meaning of
the "queue" parameter for traffic steering depending on the controller
model: there is the 82575 meaning, which "queue" means a RX Hardware
Queue, and the i350 meaning, where it is a reception pool.

The previous behaviour was having no effect for i210 based controllers
because the QSEL bit of the RAH register wasn't being set.

This patch separates the condition in discrete cases, so the different
handling is clearer.

Fixes: 83c21335c876 ("igb: improve MAC filter handling")
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/igb/igb_main.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index cce7ada89255..9afee130c2aa 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -8763,12 +8763,17 @@  static void igb_rar_set_index(struct igb_adapter *adapter, u32 index)
 		if (is_valid_ether_addr(addr))
 			rar_high |= E1000_RAH_AV;
 
-		if (hw->mac.type == e1000_82575)
+		switch (hw->mac.type) {
+		case e1000_82575:
+		case e1000_i210:
 			rar_high |= E1000_RAH_POOL_1 *
 				    adapter->mac_table[index].queue;
-		else
+			break;
+		default:
 			rar_high |= E1000_RAH_POOL_1 <<
 				    adapter->mac_table[index].queue;
+			break;
+		}
 	}
 
 	wr32(E1000_RAL(index), rar_low);