@@ -111,6 +111,7 @@ config USB_LAN78XX
select MII
select PHYLIB
select MICROCHIP_PHY
+ select FIXED_PHY
help
This option adds support for Microchip LAN78XX based USB 2
& USB 3 10/100/1000 Ethernet adapters.
@@ -36,13 +36,12 @@
#include <linux/irq.h>
#include <linux/irqchip/chained_irq.h>
#include <linux/microchipphy.h>
-#include <linux/phy.h>
+#include <linux/phy_fixed.h>
#include "lan78xx.h"
#define DRIVER_AUTHOR "WOOJUNG HUH <woojung.huh@microchip.com>"
#define DRIVER_DESC "LAN78XX USB 3.0 Gigabit Ethernet Devices"
#define DRIVER_NAME "lan78xx"
-#define DRIVER_VERSION "1.0.6"
#define TX_TIMEOUT_JIFFIES (5 * HZ)
#define THROTTLE_JIFFIES (HZ / 8)
@@ -402,6 +401,7 @@ struct lan78xx_net {
struct statstage stats;
struct irq_domain_data domain_data;
+ struct phy_device *fixedphy;
};
/* define external phy id */
@@ -1477,7 +1477,6 @@ static void lan78xx_get_drvinfo(struct net_device *net,
struct lan78xx_net *dev = netdev_priv(net);
strncpy(info->driver, DRIVER_NAME, sizeof(info->driver));
- strncpy(info->version, DRIVER_VERSION, sizeof(info->version));
usb_make_path(dev->udev, info->bus_info, sizeof(info->bus_info));
}
@@ -2003,52 +2002,91 @@ static int ksz9031rnx_fixup(struct phy_device *phydev)
return 1;
}
-static int lan78xx_phy_init(struct lan78xx_net *dev)
+static int lan7801_phy_init(struct phy_device **phydev,
+ struct lan78xx_net *dev)
{
+ u32 buf;
int ret;
- u32 mii_adv;
- struct phy_device *phydev;
-
- phydev = phy_find_first(dev->mdiobus);
- if (!phydev) {
- netdev_err(dev->net, "no PHY found\n");
- return -EIO;
- }
-
- if ((dev->chipid == ID_REV_CHIP_ID_7800_) ||
- (dev->chipid == ID_REV_CHIP_ID_7850_)) {
- phydev->is_internal = true;
- dev->interface = PHY_INTERFACE_MODE_GMII;
-
- } else if (dev->chipid == ID_REV_CHIP_ID_7801_) {
- if (!phydev->drv) {
+ struct fixed_phy_status fphy_status = {
+ .link = 1,
+ .speed = SPEED_1000,
+ .duplex = DUPLEX_FULL,
+ };
+
+ if (!*phydev) {
+ netdev_dbg(dev->net, "PHY Not Found!! Registering Fixed PHY\n");
+ *phydev = fixed_phy_register(PHY_POLL, &fphy_status, -1,
+ NULL);
+ if (IS_ERR(*phydev)) {
+ netdev_err(dev->net, "No PHY/fixed_PHY found\n");
+ return -ENODEV;
+ }
+ netdev_dbg(dev->net, "Registered FIXED PHY\n");
+ dev->interface = PHY_INTERFACE_MODE_RGMII;
+ dev->fixedphy = *phydev;
+ ret = lan78xx_write_reg(dev, MAC_RGMII_ID,
+ MAC_RGMII_ID_TXC_DELAY_EN_);
+ ret = lan78xx_write_reg(dev, RGMII_TX_BYP_DLL, 0x3D00);
+ ret = lan78xx_read_reg(dev, HW_CFG, &buf);
+ buf |= HW_CFG_CLK125_EN_;
+ buf |= HW_CFG_REFCLK25_EN_;
+ ret = lan78xx_write_reg(dev, HW_CFG, buf);
+ } else {
+ if (!(*phydev)->drv) {
netdev_err(dev->net, "no PHY driver found\n");
return -EIO;
}
-
dev->interface = PHY_INTERFACE_MODE_RGMII;
-
/* external PHY fixup for KSZ9031RNX */
ret = phy_register_fixup_for_uid(PHY_KSZ9031RNX, 0xfffffff0,
ksz9031rnx_fixup);
if (ret < 0) {
- netdev_err(dev->net, "fail to register fixup\n");
+ netdev_err(dev->net, "fail to register fixup PHY_KSZ9031RNX\n");
return ret;
}
/* external PHY fixup for LAN8835 */
ret = phy_register_fixup_for_uid(PHY_LAN8835, 0xfffffff0,
lan8835_fixup);
if (ret < 0) {
- netdev_err(dev->net, "fail to register fixup\n");
+ netdev_err(dev->net, "fail to register fixup for PHY_LAN8835\n");
return ret;
}
/* add more external PHY fixup here if needed */
- phydev->is_internal = false;
- } else {
- netdev_err(dev->net, "unknown ID found\n");
- ret = -EIO;
- goto error;
+ (*phydev)->is_internal = false;
+ }
+ return 0;
+}
+
+static int lan78xx_phy_init(struct lan78xx_net *dev)
+{
+ int ret;
+ u32 mii_adv;
+ struct phy_device *phydev;
+
+ phydev = phy_find_first(dev->mdiobus);
+ switch (dev->chipid) {
+ case ID_REV_CHIP_ID_7801_:
+ ret = lan7801_phy_init(&phydev, dev);
+ if (ret < 0) {
+ netdev_err(dev->net, "lan7801: PHY Init Failed");
+ return ret;
+ }
+ break;
+
+ case ID_REV_CHIP_ID_7800_:
+ case ID_REV_CHIP_ID_7850_:
+ if (!phydev) {
+ netdev_err(dev->net, "no PHY found\n");
+ return -EIO;
+ }
+ phydev->is_internal = true;
+ dev->interface = PHY_INTERFACE_MODE_GMII;
+ break;
+
+ default:
+ netdev_err(dev->net, "Unknown CHIP ID found\n");
+ return -EIO;
}
/* if phyirq is not set, use polling mode in phylib */
@@ -2067,6 +2105,12 @@ static int lan78xx_phy_init(struct lan78xx_net *dev)
if (ret) {
netdev_err(dev->net, "can't attach PHY to %s\n",
dev->mdiobus->id);
+ if (dev->chipid == ID_REV_CHIP_ID_7801_) {
+ phy_unregister_fixup_for_uid(PHY_KSZ9031RNX,
+ 0xfffffff0);
+ phy_unregister_fixup_for_uid(PHY_LAN8835,
+ 0xfffffff0);
+ }
return -EIO;
}
@@ -2084,12 +2128,6 @@ static int lan78xx_phy_init(struct lan78xx_net *dev)
dev->fc_autoneg = phydev->autoneg;
return 0;
-
-error:
- phy_unregister_fixup_for_uid(PHY_KSZ9031RNX, 0xfffffff0);
- phy_unregister_fixup_for_uid(PHY_LAN8835, 0xfffffff0);
-
- return ret;
}
static int lan78xx_set_rx_max_frame_length(struct lan78xx_net *dev, int size)
@@ -3501,6 +3539,11 @@ static void lan78xx_disconnect(struct usb_interface *intf)
phy_disconnect(net->phydev);
+ if (dev->fixedphy) {
+ fixed_phy_unregister(dev->fixedphy);
+ dev->fixedphy = NULL;
+ }
+
unregister_netdev(net);
cancel_delayed_work_sync(&dev->wq);
Adding Fixed PHY support to the lan78xx driver. Signed-off-by: Raghuram Chary J <raghuramchary.jallipalli@microchip.com> --- v0->v1: * Remove driver version #define * Modify netdev_info to netdev_dbg * Move lan7801 specific to new routine and add switch case * Minor cleanup --- drivers/net/usb/Kconfig | 1 + drivers/net/usb/lan78xx.c | 113 ++++++++++++++++++++++++++++++++-------------- 2 files changed, 79 insertions(+), 35 deletions(-)