new file mode 100644
@@ -0,0 +1,36 @@
+GNSS Receiver DT binding
+
+This documents the binding structure and common properties for GNSS receiver
+devices.
+
+A GNSS receiver node is a node named "gnss" and typically resides on a serial
+bus (e.g. UART, I2C or SPI).
+
+Please refer to the following documents for generic properties:
+
+ Documentation/devicetree/bindings/serial/slave-device.txt
+ Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Required Properties:
+
+- compatible : A string reflecting the vendor and specific device the node
+ represents
+
+Optional Properties:
+- enable-gpios : GPIO used to power on (or off) the device
+- timepulse-gpios : Timepulse (e.g. 1PPS) GPIO
+
+Example:
+
+serial@1234 {
+ compatible = "ns16550a";
+
+ gnss {
+ compatible = "u-blox,neo-8";
+
+ vcc-supply = <&gnss_reg>;
+ timepulse-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+
+ current-speed = <4800>;
+ };
+};
@@ -5965,6 +5965,7 @@ F: include/uapi/linux/gigaset_dev.h
GNSS SUBSYSTEM
M: Johan Hovold <johan@kernel.org>
S: Maintained
+F: Documentation/devicetree/bindings/gnss/
F: drivers/gnss/
F: include/linux/gnss.h
Describe generic properties for GNSS receivers. Signed-off-by: Johan Hovold <johan@kernel.org> --- .../devicetree/bindings/gnss/gnss.txt | 36 +++++++++++++++++++ MAINTAINERS | 1 + 2 files changed, 37 insertions(+) create mode 100644 Documentation/devicetree/bindings/gnss/gnss.txt