diff --git a/board/keymile/common/common.c b/board/keymile/common/common.c
index 3908e63..b113c0a 100644
--- a/board/keymile/common/common.c
+++ b/board/keymile/common/common.c
@@ -677,9 +677,6 @@ int ethernet_present(void)
 
 int board_eth_init(bd_t *bis)
 {
-#ifdef CONFIG_KEYMILE_HDLC_ENET
-	(void)keymile_hdlc_enet_initialize(bis);
-#endif
 	if (ethernet_present())
 		return cpu_eth_init(bis);
 
diff --git a/board/keymile/common/common.h b/board/keymile/common/common.h
index cdc35b6..6ce992a 100644
--- a/board/keymile/common/common.h
+++ b/board/keymile/common/common.h
@@ -125,10 +125,6 @@ struct bfticu_iomap {
 int ethernet_present(void);
 int ivm_read_eeprom(void);
 
-#ifdef CONFIG_KEYMILE_HDLC_ENET
-int keymile_hdlc_enet_initialize(bd_t *bis);
-#endif
-
 int set_km_env(void);
 int fdt_set_node_and_value(void *blob,
 			char *nodename,
diff --git a/board/keymile/common/keymile_hdlc_enet.c b/board/keymile/common/keymile_hdlc_enet.c
deleted file mode 100644
index a545211..0000000
--- a/board/keymile/common/keymile_hdlc_enet.c
+++ /dev/null
@@ -1,620 +0,0 @@
-/*
- * (C) Copyright 2008
- * Gary Jennejohn, DENX Software Engineering GmbH, garyj@denx.de.
- *
- * Based in part on arch/powerpc/cpu/mpc8260/ether_scc.c.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <malloc.h>
-#include <net.h>
-
-#ifdef CONFIG_KEYMILE_HDLC_ENET
-#ifdef TEST_IT
-#include <command.h>
-#endif
-
-#include "keymile_hdlc_enet.h"
-
-extern char keymile_slot;	/* our slot number in the backplane */
-
-/* Allow up to about 50 ms for sending */
-#define TOUT_LOOP	50000
-
-/*
- * Since, except during initialization, ethact is always HDLC
- * while we're in the driver, just use serial_printf() everywhere for
- * output.  This avoids possible conflicts when netconsole is being
- * used.
- */
-#define dprintf(fmt, args...)	serial_printf(fmt, ##args)
-
-/* Cannot use the storage from net.c because we allocate larger buffers */
-static volatile uchar MyPktBuf[HDLC_PKTBUFSRX * PKT_MAXBLR_SIZE + PKTALIGN];
-static volatile uchar *MyRxPackets[HDLC_PKTBUFSRX]; /* Receive packet */
-
-static unsigned int keymile_rxIdx;	/* index of the current RX buffer */
-
-static IPaddr_t cachedNumbers[CACHEDNUMBERS]; /* 4 bytes per entry */
-void initCachedNumbers(int);
-
-/*
-  * SCC Ethernet Tx and Rx buffer descriptors allocated at the
-  *  immr->udata_bd address on Dual-Port RAM
-  * Provide for Double Buffering
-  */
-typedef volatile struct CommonBufferDescriptor {
-    cbd_t txbd;			/* Tx BD */
-    cbd_t rxbd[HDLC_PKTBUFSRX];	/* Rx BD */
-} RTXBD;
-
-/*
- * This must be extern because it is allocated in DPRAM using CPM-sepcific
- * code.
- */
-static RTXBD *rtx;
-
-static int keymile_hdlc_enet_send(struct eth_device *, volatile void *, int);
-static int keymile_hdlc_enet_recv(struct eth_device *);
-void keymile_hdlc_enet_init_bds(RTXBD *);
-extern int keymile_hdlc_enet_init(struct eth_device *, bd_t *);
-extern void keymile_hdlc_enet_halt(struct eth_device *);
-
-/* flags in the buffer descriptor not defined anywhere else */
-#define BD_SC_CT	BD_SC_CD
-#define BD_SC_CR	0x04
-#define BD_SC_DE	0x80
-#ifndef BD_SC_TC
-#define BD_SC_TC	((ushort)0x0400)	/* Transmit CRC */
-#endif
-#define BD_SC_FIRST	BD_SC_TC
-#define BD_SC_STATS (BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_CR | BD_SC_CD \
-		| BD_SC_OV | BD_SC_DE)
-
-#if defined(TEST_RX) || defined(TEST_TX) || defined(TEST_IT)
-static void hexdump(unsigned char *buf, int len)
-{
-	int i;
-	const int bytesPerLine = 32;
-
-	if (len > 4 * bytesPerLine)
-		len = 4 * bytesPerLine;
-	dprintf("\t address: %08x\n", (unsigned int)buf);
-	for (i = 0; i < len; i++) {
-		if (i % bytesPerLine == 0)
-			dprintf("%04x: ", (unsigned short)i);
-		dprintf("%02x ", buf[i]);
-		if ((i + 1) % bytesPerLine == 0) {
-			dprintf("\n");
-			continue;
-		}
-		if ((i + 1) % 8 == 0)
-			printf(" ");
-	}
-	if (len % bytesPerLine)
-		dprintf("\n");
-}
-#endif
-
-int keymile_hdlc_enet_initialize(bd_t *bis)
-{
-	struct eth_device *dev;
-
-	dev = (struct eth_device *) malloc(sizeof *dev);
-	memset(dev, 0, sizeof *dev);
-#ifdef TEST_IT
-	seth = dev;
-#endif
-
-	sprintf(dev->name, "HDLC");
-	dev->init   = keymile_hdlc_enet_init;
-	dev->halt   = keymile_hdlc_enet_halt;
-	dev->send   = keymile_hdlc_enet_send;
-	dev->recv   = keymile_hdlc_enet_recv;
-
-	eth_register(dev);
-
-	return 1;
-}
-
-/*
- * This is called from the board-specific driver after rtx is allocated.
- */
-void keymile_hdlc_enet_init_bds(RTXBD *board_rtx)
-{
-	volatile cbd_t *bdp;
-	int i;
-
-	rtx = board_rtx;
-	keymile_rxIdx = 0;
-	/*
-	 * Initialize the buffer descriptors.
-	 */
-	bdp = &rtx->txbd;
-	bdp->cbd_sc = 0;
-	bdp->cbd_bufaddr = 0;
-	bdp->cbd_sc = BD_SC_WRAP;
-
-	/*
-	 *	Setup RX packet buffers, aligned correctly.
-	 *	Borrowed from net/net.c.
-	 */
-	MyRxPackets[0] = &MyPktBuf[0] + (PKTALIGN - 1);
-	MyRxPackets[0] -= (ulong)MyRxPackets[0] % PKTALIGN;
-	for (i = 1; i < HDLC_PKTBUFSRX; i++)
-		MyRxPackets[i] = MyRxPackets[0] + i * PKT_MAXBLR_SIZE;
-
-	bdp = &rtx->rxbd[0];
-	for (i = 0; i < HDLC_PKTBUFSRX; i++) {
-		bdp->cbd_sc = BD_SC_EMPTY;
-		/* Leave space at the start for INET header. */
-		bdp->cbd_bufaddr = (unsigned int)(MyRxPackets[i] +
-			INET_HDR_ALIGN);
-		bdp++;
-	}
-	bdp--;
-	bdp->cbd_sc |= BD_SC_WRAP;
-}
-
-/*
- * This returns the current port number for NETCONSOLE.  If nc_port
- * in netconsole.c weren't declared static we wouldn't need this.
- */
-static short get_netcons_port(void)
-{
-	char *p;
-	short nc_port;
-
-	nc_port = 6666; /* default */
-
-	p = getenv("ncip");
-	if (p != NULL) {
-		p = strchr(p, ':');
-		if (p != NULL)
-			nc_port = simple_strtoul(p + 1, NULL, 10);
-	}
-
-	return htons(nc_port);
-}
-
-/*
- * Read the port numbers from the variables
- */
-void initCachedNumbers(int verbose)
-{
-	char *str;
-	ushort port;
-
-	/* already in network order */
-	cachedNumbers[IP_ADDR] = getenv_IPaddr("ipaddr");
-	/* already in network order */
-	cachedNumbers[IP_SERVER] = getenv_IPaddr("serverip");
-	str = getenv("tftpsrcp");
-	if (str != NULL) {
-		/* avoid doing htons() again and again */
-		port = htons((ushort)simple_strtol(str, NULL, 10));
-		cachedNumbers[TFTP_SRC_PORT] = port;
-	} else
-		/* this can never be a valid port number */
-		cachedNumbers[TFTP_SRC_PORT] = (ulong)-1;
-	str = getenv("tftpdstp");
-	if (str != NULL) {
-		/* avoid doing htons() again and again */
-		port = htons((ushort)simple_strtol(str, NULL, 10));
-		cachedNumbers[TFTP_DST_PORT] = port;
-	} else
-		/* this is the default value */
-		cachedNumbers[TFTP_DST_PORT] = htons(WELL_KNOWN_PORT);
-	/* already in network order */
-	cachedNumbers[NETCONS_PORT] = get_netcons_port();
-	if (verbose) {
-		dprintf("\nIP Number Initialization:\n");
-		dprintf(" ip address          %08lx\n", cachedNumbers[IP_ADDR]);
-		dprintf(" server ip address   %08lx\n",
-			cachedNumbers[IP_SERVER]);
-		dprintf(" tftp client port    %ld\n",
-			cachedNumbers[TFTP_SRC_PORT]);
-		dprintf(" tftp server port    %ld\n",
-			cachedNumbers[TFTP_DST_PORT]);
-		dprintf(" netcons port        %ld\n",
-			cachedNumbers[NETCONS_PORT]);
-		dprintf(" slot number (hex)   %02x\n", keymile_slot);
-	}
-}
-
-static void keymile_hdlc_enet_doarp(volatile void *packet, int len)
-{
-	ARP_t *arp;
-	IPaddr_t src_ip; /* U-Boot's IP */
-	IPaddr_t dest_ip; /* the mgcoge's IP */
-	unsigned char *packet_copy = malloc(len);
-
-	/*
-	 * Handling an ARP request means that a new transfer has started.
-	 * Update our cached parameters now.
-	 */
-	initCachedNumbers(0); /* may reinit port numbers */
-
-	/* special handling required for ARP */
-	arp = (ARP_t *)(packet + ETHER_HDR_SIZE);
-	/*
-	 *	XXXX
-	 * This is pretty dirty!  NetReceive only uses
-	 * a few fields when handling an ARP reply, so
-	 * we only modify those here.  This could
-	 * result in catastrophic failure at a later
-	 * time if the handler is modified!
-	 */
-	arp->ar_op = htons(ARPOP_REPLY);
-	/* save his/our IP */
-	src_ip = NetReadIP(&arp->ar_data[6]);
-	dest_ip = NetReadIP(&arp->ar_data[16]);
-	/* copy target IP to source IP */
-	NetCopyIP(&arp->ar_data[6], &dest_ip);
-	/* copy our IP to the right place */
-	NetCopyIP(&arp->ar_data[16], &src_ip);
-	/* always use 0x7f as the MAC for the coge */
-	arp->ar_data[0] = HDLC_UACUA;
-	/*
-	 * copy the packet
-	 * if NetReceive wants to write to stdout, it may overwrite packet
-	 * especially if stdout is set to nc!
-	 *
-	 * However, if the malloc() above fails then we can still try the
-	 * original packet, rather than causing the transfer to fail.
-	 */
-	if (packet_copy != NULL) {
-		memcpy(packet_copy, (char *)packet, len);
-		NetReceive(packet_copy, len);
-		free(packet_copy);
-	} else
-		NetReceive(packet, len);
-}
-
-/*
- * NOTE all callers ignore the returned value!
- * At the moment this only handles ARP Requests, TFTP and NETCONSOLE.
- */
-static int keymile_hdlc_enet_send(struct eth_device *dev, volatile void *packet,
-	int len)
-{
-	int j;
-	uint data_addr;
-	int data_len;
-	struct icn_hdr header;
-	struct icn_frame *frame;
-	Ethernet_t *et;
-	ARP_t *arp;
-	IP_t *ip;
-
-	if (len > (MAX_FRAME_LENGTH - sizeof(header)))
-		return -1;
-
-	frame = NULL;
-	et = NULL;
-	arp = NULL;
-	ip = NULL;
-
-	j = 0;
-	while ((rtx->txbd.cbd_sc & BD_SC_READY) && (j < TOUT_LOOP)) {
-		/* will also trigger Wd if needed, but maybe too often  */
-		udelay(1);
-		j++;
-	}
-	if (j >= TOUT_LOOP) {
-		dprintf("TX not ready sc %x\n", rtx->txbd.cbd_sc);
-		return -1;
-	}
-
-	/*
-	 * First check for an ARP Request since this requires special handling.
-	 */
-	if (len >= (ARP_HDR_SIZE + ETHER_HDR_SIZE)) {
-		et = (Ethernet_t *)packet;
-		arp = (ARP_t *)(((char *)et) + ETHER_HDR_SIZE);
-		/* ARP and REQUEST? */
-		if (et->et_protlen == PROT_ARP &&
-			arp->ar_op == htons(ARPOP_REQUEST)) {
-			/* just short-circuit the request on the U-Boot side */
-			keymile_hdlc_enet_doarp(packet, len);
-			return 0;
-		}
-	}
-
-	/*
-	 * GJ - I suppose the assumption here that len will always be
-	 * > INET_HDR_SIZE is alright as long as the network stack
-	 * isn't changed.
-	 * Do not send INET header.
-	 */
-	data_len = len + sizeof(header) - INET_HDR_SIZE;
-	frame = (struct icn_frame *) (((char *)packet) + INET_HDR_SIZE -
-		sizeof(header));
-
-#ifdef TEST_TX
-	printf("frame: %08x, ", frame);
-	hexdump((unsigned char *)packet, data_len + INET_HDR_SIZE);
-#endif
-
-	data_addr = (uint)frame;
-	if (len >= (IP_HDR_SIZE + ETHER_HDR_SIZE))
-		ip = (IP_t *)(packet + ETHER_HDR_SIZE);
-	/* Is it TFTP? TFTP always uses UDP and the cached dport */
-	if (ip != NULL && ip->ip_p == IPPROTO_UDP && ip->udp_dst ==
-			(ushort)cachedNumbers[TFTP_DST_PORT]) {
-		/* just in case the port wasn't set in the environment */
-		if (cachedNumbers[TFTP_SRC_PORT] == (ulong)-1)
-			cachedNumbers[TFTP_SRC_PORT] = ip->udp_src;
-		frame->hdr.application = MGS_TFTP;
-	}
-	/*
-	 * Is it NETCONSOLE?  NETCONSOLE always uses UDP.
-	 */
-	else if (ip != NULL && ip->ip_p == IPPROTO_UDP
-		&& ip->udp_dst == (ushort)cachedNumbers[NETCONS_PORT]) {
-			frame->hdr.application = MGS_NETCONS;
-	} else {
-		/* reject unknown packets */
-		/* may do some check on frame->hdr.application */
-		dprintf("Unknown packet type in %s, rejected\n",
-			__func__);
-		return -1;
-	}
-	/*
-	 * Could extract the target's slot ID from its MAC here,
-	 * but u-boot only wants to talk to the active server.
-	 *
-	 * avoid setting new source address when moving to another slot
-	 */
-	frame->hdr.src_addr = keymile_slot;
-	frame->hdr.dest_addr = HDLC_UACUA;
-#ifdef TEST_TX
-	{
-		dprintf("TX: ");
-		hexdump((unsigned char *)data_addr, data_len);
-	}
-#endif
-
-	flush_cache(data_addr, data_len);
-	rtx->txbd.cbd_bufaddr = data_addr;
-	rtx->txbd.cbd_datlen = data_len;
-	rtx->txbd.cbd_sc |= (BD_SC_READY | BD_SC_TC | BD_SC_LAST | BD_SC_WRAP);
-
-	while ((rtx->txbd.cbd_sc & BD_SC_READY) && (j < TOUT_LOOP)) {
-		/* will also trigger Wd if needed, but maybe too often  */
-		udelay(1);
-		j++;
-	}
-	if (j >= TOUT_LOOP)
-		dprintf("TX timeout\n");
-#ifdef ET_DEBUG
-	dprintf("cycles: %d    status: %x\n", j, rtx->txbd.cbd_sc);
-#endif
-	j = (rtx->txbd.cbd_sc & BD_SC_STATS); /* return only status bits */
-	return j;
-}
-
-/*
- * During a receive, the RxIdx points to the current incoming buffer.
- * When we update through the ring, if the next incoming buffer has
- * not been given to the system, we just set the empty indicator,
- * effectively tossing the packet.
- */
-static int keymile_hdlc_enet_recv(struct eth_device *dev)
-{
-	int length;
-	unsigned char app;
-	struct icn_frame *fp;
-	Ethernet_t *ep;
-	IP_t *ip;
-
-	for (;;) {
-		if (rtx->rxbd[keymile_rxIdx].cbd_sc & BD_SC_EMPTY) {
-			length = -1;
-			break;	/* nothing received - leave for() loop */
-		}
-
-		length = rtx->rxbd[keymile_rxIdx].cbd_datlen;
-#ifdef TEST_RX
-		dprintf("packet %d bytes long\n", length);
-#endif
-
-		/*
-		 * BD_SC_BR -> LG bit
-		 * BD_SC_FR -> NO bit
-		 * BD_SC_PR -> AB bit
-		 * BD_SC_NAK -> CR bit
-		 * 0x80 -> DE bit
-		 */
-		if (rtx->rxbd[keymile_rxIdx].cbd_sc & BD_SC_STATS) {
-#ifdef ET_DEBUG
-			dprintf("err: %x\n", rtx->rxbd[keymile_rxIdx].cbd_sc);
-#endif
-		} else if (length > MAX_FRAME_LENGTH) { /* can't happen */
-#ifdef ET_DEBUG
-			dprintf("err: packet too big\n");
-#endif
-		} else {
-			fp = (struct icn_frame *)(MyRxPackets[keymile_rxIdx] +
-				INET_HDR_ALIGN - INET_HDR_SIZE);
-#ifdef TEST_RX
-			dprintf("RX %d: ", keymile_rxIdx);
-			hexdump((unsigned char *)MyRxPackets[keymile_rxIdx],
-				INET_HDR_ALIGN + INET_HDR_SIZE + 4);
-#endif
-			/* copy icn header to the beginning */
-			memcpy(fp, ((char *)fp + INET_HDR_SIZE),
-				sizeof(struct icn_hdr));
-			app = fp->hdr.application;
-			if (app == MGS_NETCONS || app == MGS_TFTP) {
-				struct icn_hdr *ih = &fp->hdr;
-				unsigned char icn_src_addr = ih->src_addr;
-				unsigned char icn_dest_addr = ih->dest_addr;
-
-				/*
-				 * expand header by INET_HDR_SIZE
-				 */
-				length += INET_HDR_SIZE;
-				/* initalize header */
-				memset((char *)fp->data, 0x00, INET_HDR_SIZE);
-				ep = (Ethernet_t *)fp->data;
-				/* set MACs */
-				ep->et_dest[0] = icn_dest_addr;
-				ep->et_src[0] = icn_src_addr;
-				ep->et_protlen = htons(PROT_IP);
-				/* set ip stuff */
-				ip = (IP_t *)(fp->data + ETHER_HDR_SIZE);
-				/* set ip addresses */
-				ip->ip_src = cachedNumbers[IP_SERVER];
-				ip->ip_dst = cachedNumbers[IP_ADDR];
-				/* ip length */
-				ip->ip_len = htons(length - ETHER_HDR_SIZE -
-					REMOVE);
-				/* ip proto */
-				ip->ip_p = IPPROTO_UDP;
-				switch (app) {
-				case MGS_TFTP:
-					/* swap src/dst port numbers */
-					ip->udp_src = (ushort)
-						cachedNumbers[TFTP_DST_PORT];
-					ip->udp_dst = (ushort)
-						cachedNumbers[TFTP_SRC_PORT];
-					ip->udp_len = ip->ip_len -
-						IP_HDR_SIZE_NO_UDP;
-					ip->udp_xsum = 0;
-					break;
-				case MGS_NETCONS:
-					ip->udp_src = (ushort)
-						cachedNumbers[NETCONS_PORT];
-					/*
-					 * in drivers/net/netconsole.c src port
-					 * equals dest port
-					 */
-					ip->udp_dst = ip->udp_src;
-					ip->udp_len = ip->ip_len -
-						IP_HDR_SIZE_NO_UDP;
-					ip->udp_xsum = 0;
-					break;
-				}
-				/* ip version */
-				ip->ip_hl_v = (0x40) | (0x0f &
-					(IP_HDR_SIZE_NO_UDP / 4));
-				ip->ip_tos = 0;
-				ip->ip_id = 0;
-				/* flags, fragment offset */
-				ip->ip_off = htons(0x4000);
-				ip->ip_ttl = 255; /* time to live */
-				/* have to fixup the checksum */
-				ip->ip_sum = ~NetCksum((uchar *)ip,
-					IP_HDR_SIZE_NO_UDP / 2);
-				/*
-				 * Pass the packet up to the protocol layers
-				 * but remove dest_addr, src_addr, application
-				 * and the CRC.
-				 */
-#ifdef TEST_RX
-				hexdump((unsigned char *)fp->data,
-					INET_HDR_SIZE + 4);
-#endif
-				NetReceive(fp->data, length - REMOVE);
-			} else {
-				/*
-				 * the other application types are not yet
-				 * supported by u-boot.
-				 */
-				/* normally drop it */
-#ifdef TEST_NO
-				/* send it anyway */
-				fp = (struct icn_frame *)
-					(MyRxPackets[keymile_rxIdx] +
-						INET_HDR_ALIGN);
-				NetReceive(fp->data, length - REMOVE);
-#endif
-			}
-		}
-
-		/* Give the buffer back to the SCC. */
-		rtx->rxbd[keymile_rxIdx].cbd_datlen = 0;
-
-		/* wrap around buffer index when necessary */
-		if ((keymile_rxIdx + 1) >= HDLC_PKTBUFSRX) {
-			rtx->rxbd[HDLC_PKTBUFSRX - 1].cbd_sc =
-				(BD_SC_WRAP | BD_SC_EMPTY);
-			keymile_rxIdx = 0;
-		} else {
-			rtx->rxbd[keymile_rxIdx].cbd_sc = BD_SC_EMPTY;
-			keymile_rxIdx++;
-		}
-	}
-	return length;
-}
-
-#ifdef TEST_IT
-/* simple send test routine */
-int hdlc_enet_stest(struct cmd_tbl_s *a, int b, int c, char **d)
-{
-	unsigned char pkt[2];
-	int ret;
-
-	dprintf("enter stest\n");
-	/* may have to initialize things */
-	if (seth->state != ETH_STATE_ACTIVE) {
-		/* the bd_t* is not used */
-		if (seth->init(seth, NULL) >= 0)
-			seth->state = ETH_STATE_ACTIVE;
-	}
-	pkt[0] = 0xea;
-	pkt[1] = 0xae;
-	ret = keymile_hdlc_enet_send(seth, pkt, 2);
-	dprintf("return from send %x\n", ret);
-	dprintf("exit stest\n");
-	return ret;
-}
-U_BOOT_CMD(
-	stest, 1, 1, hdlc_enet_stest,
-	"simple send test for hdlc_enet",
-	""
-);
-/* simple receive test routine */
-int hdlc_enet_rtest(struct cmd_tbl_s *a, int b, int c, char **d)
-{
-	int ret;
-
-	dprintf("enter rtest\n");
-	/* may have to initialize things */
-	if (seth->state != ETH_STATE_ACTIVE) {
-		/* the bd_t* is not used */
-		if (seth->init(seth, NULL) >= 0)
-			seth->state = ETH_STATE_ACTIVE;
-	}
-	ret = keymile_hdlc_enet_recv(seth);
-	dprintf("return from recv %x\n", ret);
-	dprintf("exit rtest\n");
-	return ret;
-}
-U_BOOT_CMD(
-	rtest, 1, 1, hdlc_enet_rtest,
-	"simple receive test for hdlc_enet",
-	""
-);
-#endif
-
-#endif /* CONFIG_KEYMILE_HDLC_ENET */
diff --git a/board/keymile/mgcoge/Makefile b/board/keymile/mgcoge/Makefile
index 3308621..a2b9da4 100644
--- a/board/keymile/mgcoge/Makefile
+++ b/board/keymile/mgcoge/Makefile
@@ -28,8 +28,7 @@ endif
 
 LIB	= $(obj)lib$(BOARD).o
 
-COBJS	:= $(BOARD).o ../common/common.o ../common/keymile_hdlc_enet.o \
-		mgcoge_hdlc_enet.o
+COBJS	:= $(BOARD).o ../common/common.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/keymile/mgcoge/mgcoge_hdlc_enet.c b/board/keymile/mgcoge/mgcoge_hdlc_enet.c
deleted file mode 100644
index 98f68a6..0000000
--- a/board/keymile/mgcoge/mgcoge_hdlc_enet.c
+++ /dev/null
@@ -1,276 +0,0 @@
-/*
- * (C) Copyright 2008
- * Gary Jennejohn, DENX Software Engineering GmbH, garyj@denx.de.
- *
- * Based in part on arch/powerpc/cpu/mpc8260/ether_scc.c.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <malloc.h>
-#include <net.h>
-
-#ifdef CONFIG_KEYMILE_HDLC_ENET
-
-#include "../common/keymile_hdlc_enet.h"
-
-char keymile_slot;	/* our slot number in the backplane */
-
-/*
- * Since, except during initialization, ethact is always HDLC ETHERNET
- * while we're in the driver, just use serial_printf() everywhere for
- * output.  This avoids possible conflicts when netconsole is being
- * used.
- */
-#define dprintf(fmt, args...)	serial_printf(fmt, ##args)
-
-static int already_inited;
-
-/*
-  * SCC Ethernet Tx and Rx buffer descriptors allocated at the
-  *  immr->udata_bd address on Dual-Port RAM
-  * Provide for Double Buffering
-  */
-typedef volatile struct CommonBufferDescriptor {
-    cbd_t txbd;			/* Tx BD */
-    cbd_t rxbd[HDLC_PKTBUFSRX];	/* Rx BD */
-} RTXBD;
-
-static RTXBD *rtx;
-
-int keymile_hdlc_enet_init(struct eth_device *, bd_t *);
-void keymile_hdlc_enet_halt(struct eth_device *);
-extern void keymile_hdlc_enet_init_bds(RTXBD *);
-extern void initCachedNumbers(int);
-
-/* Use SCC1 */
-#define CPM_CR_SCC_PAGE		CPM_CR_SCC1_PAGE
-#define CPM_CR_SCC_SBLOCK	CPM_CR_SCC1_SBLOCK
-#define CMXSCR_MASK		(CMXSCR_GR1|CMXSCR_SC1|\
-					CMXSCR_RS1CS_MSK|CMXSCR_TS1CS_MSK)
-#define CMXSCR_VALUE		(CMXSCR_RS1CS_CLK11|CMXSCR_TS1CS_CLK11)
-#define MGC_PROFF_HDLC	PROFF_SCC1
-#define MGC_SCC_HDLC	0	/* Index, not number! */
-
-int keymile_hdlc_enet_init(struct eth_device *dev, bd_t *bis)
-{
-	/* int i; */
-	uint dpr;
-	/* volatile cbd_t *bdp; */
-	volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
-	volatile cpm8260_t *cp = &(im->im_cpm);
-	volatile scc_t *sccp;
-	volatile scc_hdlc_t *hpr;
-	volatile iop8260_t *iop;
-
-	if (already_inited)
-		return 0;
-
-	hpr = (scc_hdlc_t *)(&im->im_dprambase[MGC_PROFF_HDLC]);
-	sccp = (scc_t *)(&im->im_scc[MGC_SCC_HDLC]);
-	iop = &im->im_ioport;
-
-	/*
-	 * Disable receive and transmit just in case.
-	 */
-	sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-
-	/*
-	 * Avoid exhausting DPRAM, which would cause a panic.
-	 */
-	if (rtx == NULL) {
-		/* dpr is an offset into dpram */
-		dpr = m8260_cpm_dpalloc(sizeof(RTXBD), 8);
-		rtx = (RTXBD *)&im->im_dprambase[dpr];
-	}
-
-	/* We need the slot number for addressing. */
-	keymile_slot = *(char *)(CONFIG_SYS_SLOT_ID_BASE +
-		CONFIG_SYS_SLOT_ID_OFF) & CONFIG_SYS_SLOT_ID_MASK;
-	/*
-	 * Be consistent with the Linux driver and set
-	 * only enetaddr[0].
-	 *
-	 * Always add 1 to the slot number so that
-	 * there are no problems with an ethaddr which
-	 * is all 0s.  This should be acceptable because
-	 * a board should never have a slot number of 255,
-	 * which is the broadcast address.  The HDLC addressing
-	 * uses only the slot number.
-	 */
-	dev->enetaddr[0] = keymile_slot + 1;
-#ifdef TEST_IT
-	dprintf("slot %d\n", keymile_slot);
-#endif
-
-	/* use pd30, pd31 pins for TXD1, RXD1 respectively */
-	iop->iop_ppard |= (0x80000000 >> 30) | (0x80000000 >> 31);
-	iop->iop_pdird |= (0x80000000 >> 30);
-	iop->iop_psord |= (0x80000000 >> 30);
-
-	/* use pc21 as CLK11 */
-	iop->iop_pparc |= (0x80000000 >> 21);
-	iop->iop_pdirc &= ~(0x80000000 >> 21);
-	iop->iop_psorc &= ~(0x80000000 >> 21);
-
-	/* use pc15 as CTS1 */
-	iop->iop_pparc |= (0x80000000 >> 15);
-	iop->iop_pdirc &= ~(0x80000000 >> 15);
-	iop->iop_psorc &= ~(0x80000000 >> 15);
-
-	/*
-	 * SI clock routing
-	 * use CLK11
-	 * this also connects SCC1 to NMSI
-	 */
-	im->im_cpmux.cmx_scr = (im->im_cpmux.cmx_scr & ~CMXSCR_MASK) |
-		CMXSCR_VALUE;
-
-	/* keymile_rxIdx = 0; */
-
-	/*
-	 * Initialize function code registers for big-endian.
-	 */
-	hpr->sh_genscc.scc_rfcr = CPMFCR_EB;
-	hpr->sh_genscc.scc_tfcr = CPMFCR_EB;
-
-	/*
-	 * Set maximum bytes per receive buffer.
-	 */
-	hpr->sh_genscc.scc_mrblr = MAX_FRAME_LENGTH;
-
-	/* Setup CRC generator values for HDLC */
-	hpr->sh_cmask = 0x0000F0B8;
-	hpr->sh_cpres = 0x0000FFFF;
-
-	/* Initialize all error counters to 0 */
-	hpr->sh_disfc = 0;
-	hpr->sh_crcec = 0;
-	hpr->sh_abtsc = 0;
-	hpr->sh_nmarc = 0;
-	hpr->sh_retrc = 0;
-
-	/* Set maximum frame length size */
-	hpr->sh_mflr = MAX_FRAME_LENGTH;
-
-	/* set to 1 for per frame processing change later if needed */
-	hpr->sh_rfthr = 1;
-
-	hpr->sh_hmask = 0xff;
-
-	hpr->sh_haddr2 = SET_HDLC_UUA(keymile_slot);
-	hpr->sh_haddr3 = hpr->sh_haddr2;
-	hpr->sh_haddr4 = hpr->sh_haddr2;
-	/* broadcast */
-	hpr->sh_haddr1 = HDLC_BCAST;
-
-	hpr->sh_genscc.scc_rbase = (unsigned int) &rtx->rxbd[0];
-	hpr->sh_genscc.scc_tbase = (unsigned int) &rtx->txbd;
-
-#if 0
-	/*
-	 * Initialize the buffer descriptors.
-	 */
-	bdp = &rtx->txbd;
-	bdp->cbd_sc = 0;
-	bdp->cbd_bufaddr = 0;
-	bdp->cbd_sc = BD_SC_WRAP;
-
-	/*
-	 *	Setup RX packet buffers, aligned correctly.
-	 *	Borrowed from net/net.c.
-	 */
-	MyRxPackets[0] = &MyPktBuf[0] + (PKTALIGN - 1);
-	MyRxPackets[0] -= (ulong)MyRxPackets[0] % PKTALIGN;
-	for (i = 1; i < HDLC_PKTBUFSRX; i++)
-		MyRxPackets[i] = MyRxPackets[0] + i * PKT_MAXBLR_SIZE;
-
-	bdp = &rtx->rxbd[0];
-	for (i = 0; i < HDLC_PKTBUFSRX; i++) {
-		bdp->cbd_sc = BD_SC_EMPTY;
-		/* Leave space at the start for INET header. */
-		bdp->cbd_bufaddr = (unsigned int)(MyRxPackets[i] +
-			INET_HDR_ALIGN);
-		bdp++;
-	}
-	bdp--;
-	bdp->cbd_sc |= BD_SC_WRAP;
-#else
-	keymile_hdlc_enet_init_bds(rtx);
-#endif
-
-	/* Let's re-initialize the channel now.	 We have to do it later
-	 * than the manual describes because we have just now finished
-	 * the BD initialization.
-	 */
-	cp->cp_cpcr = mk_cr_cmd(CPM_CR_SCC_PAGE, CPM_CR_SCC_SBLOCK,
-					0, CPM_CR_INIT_TRX) | CPM_CR_FLG;
-	while (cp->cp_cpcr & CPM_CR_FLG);
-
-	sccp->scc_gsmrl = SCC_GSMRL_MODE_HDLC;
-	/* CTSS=1 */
-	sccp->scc_gsmrh = SCC_GSMRH_CTSS;
-	/* NOF=0, RTE=1, DRT=0, BUS=1 */
-	sccp->scc_psmr = ((0x8000 >> 6) | (0x8000 >> 10));
-
-/* loopback for local testing */
-#ifdef GJTEST
-	dprintf("LOOPBACK!\n");
-	sccp->scc_gsmrl |= SCC_GSMRL_DIAG_LOOP;
-#endif
-
-	/*
-	 * Disable all interrupts and clear all pending
-	 * events.
-	 */
-	sccp->scc_sccm = 0;
-	sccp->scc_scce = 0xffff;
-
-	/*
-	 * And last, enable the transmit and receive processing.
-	 */
-	sccp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-
-	dprintf("%s: HDLC ENET Version 0.3 on SCC%d\n", dev->name,
-		MGC_SCC_HDLC + 1);
-
-	/*
-	 * We may not get an ARP packet because ARP was already done on
-	 * a different interface, so initialize the cached values now.
-	 */
-	initCachedNumbers(1);
-
-	already_inited = 1;
-
-	return 0;
-}
-
-void keymile_hdlc_enet_halt(struct eth_device *dev)
-{
-#if 0 /* just return, but keep this for reference */
-	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
-	/* maybe should do a graceful stop here? */
-	immr->im_scc[MGC_SCC_HDLC].scc_gsmrl &=
-		~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-#endif
-}
-
-#endif /* CONFIG_MGCOGE_HDLC_ENET */
