Message ID | 20180420183219.20722-1-jandryuk@gmail.com |
---|---|
State | New |
Headers | show |
Series | ccid: Fix dwProtocols advertisement of T=0 | expand |
On Fri, Apr 20, 2018 at 02:32:19PM -0400, Jason Andryuk wrote: > Commit d7d218ef02d87c637d20d64da8f575d434ff6f78 attempted to change > dwProtocols to only advertise support for T=0 and not T=1. The change > was incorrect as it changed 0x00000003 to 0x00010000. > > lsusb -v in a linux guest shows: > "dwProtocols 65536 (Invalid values detected)", though the > smart card could still be accessed. Windows 7 does not detect inserted > smart cards and logs the the following Error in the Event Logs: > > Source: Smart Card Service > Event ID: 610 > Smart Card Reader 'QEMU QEMU USB CCID 0' rejected IOCTL SET_PROTOCOL: > Incorrect function. If this error persists, your smart card or reader > may not be functioning correctly > > Command Header: 03 00 00 00 > > Setting to 0x00000001 fixes the Windows issue. Added to usb queue. thanks, Gerd
diff --git a/hw/usb/dev-smartcard-reader.c b/hw/usb/dev-smartcard-reader.c index e6468057a0..cabb564788 100644 --- a/hw/usb/dev-smartcard-reader.c +++ b/hw/usb/dev-smartcard-reader.c @@ -329,8 +329,8 @@ static const uint8_t qemu_ccid_descriptor[] = { */ 0x07, /* u8 bVoltageSupport; 01h - 5.0v, 02h - 3.0, 03 - 1.8 */ - 0x00, 0x00, /* u32 dwProtocols; RRRR PPPP. RRRR = 0000h.*/ - 0x01, 0x00, /* PPPP: 0001h = Protocol T=0, 0002h = Protocol T=1 */ + 0x01, 0x00, /* u32 dwProtocols; RRRR PPPP. RRRR = 0000h.*/ + 0x00, 0x00, /* PPPP: 0001h = Protocol T=0, 0002h = Protocol T=1 */ /* u32 dwDefaultClock; in kHZ (0x0fa0 is 4 MHz) */ 0xa0, 0x0f, 0x00, 0x00, /* u32 dwMaximumClock; */
Commit d7d218ef02d87c637d20d64da8f575d434ff6f78 attempted to change dwProtocols to only advertise support for T=0 and not T=1. The change was incorrect as it changed 0x00000003 to 0x00010000. lsusb -v in a linux guest shows: "dwProtocols 65536 (Invalid values detected)", though the smart card could still be accessed. Windows 7 does not detect inserted smart cards and logs the the following Error in the Event Logs: Source: Smart Card Service Event ID: 610 Smart Card Reader 'QEMU QEMU USB CCID 0' rejected IOCTL SET_PROTOCOL: Incorrect function. If this error persists, your smart card or reader may not be functioning correctly Command Header: 03 00 00 00 Setting to 0x00000001 fixes the Windows issue. Signed-off-by: Jason Andryuk <jandryuk@gmail.com> Cc: qemu-stable@nongnu.org --- hw/usb/dev-smartcard-reader.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)